The specified object is a property, not an element. (-10008)

Hi!
I tried searching the forum but there were no results
I want to upgrade the iPod firmware on my 5.5 G iPod. I am using a mac so I need AlterPod.
But with AlterPod I have a problem: The specified object is a property, not an element. (-10008)
So AlterPod does not work on my mac!
Is there any alternative to AlterPod?
Thanks!
Cheerio,
phillip

If you are seeking 'AlterPod' operation assistance, here - in an AppleScript development / programming group, then - please post the request elsewhere.
If you are seeking firmware assistance for the 5th generation iPod, then - please view and / or post to the 'Fifth Generation iPod' discussion group. Participants of this group may / may not be of assistance relative to 'AlterPod' and / or other similar alternatives.
If you are seeking someone to debug 'AlterPod's error message(s), then - please contact the author / publisher.
If you are scripting 'AlterPod'*, and have a problem, then - please post the code, here. However, note that the 'AlterPod.asdictionary' has no specific 'AlterPod' Class(es) and / or Command(s).
* - 'AlterPod' is an AppleScript Studio generated application, whose internal '.scpt' files are not readable.

Similar Messages

System: unable to find the specified object.

I am trying to install tomtom 5 for mobile on my 9300i. Installation is fine but when I try to launch the application it gives the following error.
system: unable to find the specified object.
I am not able to find any work around this. Any idea please share.
thanks in advance

Hi
I have managed to get TOMTOM mobile 5 working on my Nokia 9300i.
I think its just that the TOMTOM software was writen before the 9300i was released so it does not know whether the 9300i is series 60/80 or 90.
So change the file extension names of the file system/apps/ttmobile/ttmobile.app to ttmobile.appx
If your doing this in the phones file manager you may not be able to see the system directory so press the menu key when viewing the memory card directories in the memory card in file manager, then change the view seetings under the tool pull down menu.
Then once changing the S60 file extension name go into the system/apps/ttmobile80/ttmobile.appx to ttmobile.app
This will mean that this file shortcut will now appear on your desktop for Series 80 and not the series 60 version.
You will need to do the same for the Contacts program.
Change system/apps/TTnavcontacts/ttnavcontacts.app to ttnavcontacts.appx
Change system/apps/TTnav80/ttnav80.appx to ttnav80.app
Hope this helps this is the first time I have replied to a discussion page so don't expect any rapid response if you ask me a question..

Error:[The specified object was not found in the store] when trying to read another mail box using Delegate access

Hi all,
I need to create service to access all unread mails of other mailbox's every time in Exchange server 2013, for that i trying to use Delegate access.
but i am not succeed. I am getting Error Every time : [The specified object was not found in the store]
error shows in FolderId in
var folderId = new FolderId(WellKnownFolderName.Inbox, userMailbox);
List<DelegateUser> newDelegates = new List<DelegateUser>();
DelegateUser emailDelegate = new DelegateUser("[email protected]");
emailDelegate.Permissions.InboxFolderPermissionLevel = DelegateFolderPermissionLevel.Editor;
newDelegates.Add(emailDelegate);
Mailbox mailbox = new Mailbox("[email protected]");
Collection<DelegateUserResponse> response = service.AddDelegates(mailbox, MeetingRequestsDeliveryScope.DelegatesAndSendInformationToMe, newDelegates); var userMailbox = new Mailbox(useremail);
var folderId = new FolderId(WellKnownFolderName.Inbox, userMailbox);
var itemView = new ItemView(20);
var userItems = service.FindItems(folderId, itemView);
i changed my code in many ways by adding new Delegate User with different folder permissions.
but i am getting same Error, Please help me.

That error means you don't have rights to the Mailbox your trying to access. In Exchange by default the only user that has access to mailbox is the owner of the Mailbox, Exchange Administration rights does not grant you access to another users mailbox. You
need to either specifically grant rights to each mailbox using Add-MailboxPermissions or use EWS impersonation where you can impersonate the owner of the Mailbox see
http://msdn.microsoft.com/en-us/library/bb204095(EXCHG.140).aspx and
http://msdn.microsoft.com/en-us/library/office/dd633680(v=exchg.80).aspx
Cheers
Glen

Error: A 'with' action failed because the specified object did not exist.

The weird thing is when i play the file on my computer it
gives me the little error but shows up, but when its live on the
internet it says its not working and doesnt show up. Can anyone
help me with this error?
Level #0: Frame=20
Movie Clip: Frame=1 Target="_level0.instance2"
Movie Clip: Frame=1 Target="_level0.mc_0"
Shape:
Movie Clip: Frame=1 Target="_level0.mc_1"
Shape:
Movie Clip: Frame=1 Target="_level0.mc_2"
Shape:
Movie Clip: Frame=1 Target="_level0.mc_3"
Shape:
Movie Clip: Frame=1 Target="_level0.mc_4"
Shape:
Movie Clip: Frame=1 Target="_level0.mc_5"
Shape:
Movie Clip: Frame=1 Target="_level0.mc_6"
Shape:
Movie Clip: Frame=1 Target="_level0.mc_7"
Shape:
Movie Clip: Frame=1 Target="_level0.mc_8"
Shape:
Movie Clip: Frame=1 Target="_level0.mc_9"
Shape:
Movie Clip: Frame=1 Target="_level0.mc_10"
Shape:
Movie Clip: Frame=1 Target="_level0.mc_11"
Shape:
Movie Clip: Frame=1 Target="_level0.mc_12"
Shape:
Movie Clip: Frame=1 Target="_level0.mc_13"
Shape:
Movie Clip: Frame=1 Target="_level0.mc_14"
Shape:
Movie Clip: Frame=1 Target="_level0.mc_15"
Shape:
Movie Clip: Frame=1 Target="_level0.mc_16"
Shape:
Movie Clip: Frame=1 Target="_level0.mc_17"
Shape:
Movie Clip: Frame=1 Target="_level0.ctrl_mc"
Movie Clip: Frame=1 Target="_level0.instance1"
Movie Clip: Frame=1 Target="_level0._root.prev_photo"
Shape:
Movie Clip: Frame=1 Target="_level0.mc_current_photo"
Shape:
Movie Clip: Frame=0 Target="_level0.mask_mc"
Movie Clip: Frame=1 Target="_level0.mask_mc.mask_clip_mc"
Movie Clip: Frame=0
Target="_level0.mask_mc.mask_clip_mc.mask2_mc"
Movie Clip: Frame=1 Target="_level0.soundControl"
Movie Clip: Frame=1 Target="_level0.soundControl.instance8"
Shape:
Movie Clip: Frame=0 Target="_level0.mask_whole_mc"
Movie Clip: Frame=1 Target="_level0.control"
Movie Clip: Frame=8 Target="_level0.control.myLoader"
Shape:
Movie Clip: Frame=1
Target="_level0.control.myLoader.instance9"
Edit Text:
Target="_level0.control.myLoader.instance9.instance10798" Variable=
Visible=true Text = loading."
Movie Clip: Frame=1 Target="_level0.tishi"
Shape:
Edit Text: Target="_level0.tishi.instance5" Variable=
Visible=true Text = CONTROL PANEL"
Movie Clip: Frame=1 Target="_level0.mc_mouse"
Shape:
Movie Clip: Frame=2 Target="_level0.mc"
Movie Clip: Frame=1 Target="_level0.mc.booor"
Shape:
Button: Target="_level0.mc.booor.next"
Shape:
Shape:
Button: Target="_level0.mc.booor.prev"
Shape:
Shape:
Movie Clip: Frame=1 Target="_level0.mc.booor.autoplay"
Button: Target="_level0.mc.booor.autoplay.instance6"
Shape:
Shape:
Edit Text:
Target="_level0.mc.booor.autoplay.instance6.instance7" Variable=
Visible=true Text = PAUSE"
Text:
Edit Text: Target="_level0.mc.booor.photo_title" Variable=
Visible=true Text = exterior18"
Error: A 'with' action failed because the specified object
did not exist.
Error: A 'with' action failed because the specified object
did not exist.
Error: A 'with' action failed because the specified object
did not exist.

show your code with the trace() function that indicates the
object is defined (along with the output panel's result).

"System: Unable to find the specified object" on N...

When I go to Control panel->Messaging->Text message" I get the error:- "System: Unable to find the specified object".
I also can no longer send text messages. Every time I try to send a text message, it asks for the "Centre number" which presumably is the SMS service centre number, but even if I type this in I get an error "Error: Not found".
I'm sure these 2 issues are related but I'm not sure.
Please, can someone tell me how to fix this.
Thanks.

Hi
I have the same problem except for that mine is with my nokia 9500. Did you manage to fix your problem? I started getting the same message after I have deleted certain temporary files. I then, also noticed that I do not have access to the internet and the only available option reflected was W*EasyLan
Please assist if you have managed to fix your problem or can anybody out there assist me PLEASE. Thankx

When I try to open a project, the only option for a new track is for external MIDI device; when I try to open an audio or software instrument track, I get an error message saying that "the specified number of tracks could not be created. Reduce the n

When I try to open a project, the only option for a new track is for external MIDI device; when I try to open an audio or software instrument track, I get an error message saying that "the specified number of tracks could not be created. Reduce the number of tracks to create and try again." I didn't specify ANY number of tracks. Thanks for help!

Ah.. then I suspect you just need to go to Logic's prefs/Audio and check CoreAudio...
It has been unchecked somehow...
Also.. as an aside.. Be careful not to create such large subject names in future when posting here.. They can cause issues with replying to posts in such threads.. due to a bug in the forum software.. so please keep them short and to the point...
Cheers..
Nigel

[Forum FAQ] Troubleshooting error "The specified SQL server instance is not valid" when installing SCOM reporting service

Symptom
If you have failed to install SCOM reporting service, you may encounter below error when you reinstall it:
“The specified SQL server instance is not valid”.
(Figure 1)
Figure 1.
Reason
This issue may be caused by multiple reasons, for example the reasons in Figure 1.
However, you may find that SSRS and Report Server website are configured correctly and no SSL or proxy Server is used. In these scenario, you can open the log file under path
to find the root reason:
C:\Program Files\Microsoft SQL Server\MSRS11.MSSQLSERVER\Reporting Services\LogFiles
Later, you will find the error as below:
ERROR: Throwing Microsoft.ReportingServices.Library.ReportServerDisabledException: , Microsoft.ReportingServices.Library.ReportServerDisabledException:
The report server cannot decrypt the symmetric key that is used to access sensitive or encrypted data in a report server database. You must either restore a backup key or delete all encrypted content. ---> System.Runtime.InteropServices.COMException
(0x80090016): Keyset does not exist (Exception from HRESULT: 0x80090016)
at System.Runtime.InteropServices.Marshal.ThrowExceptionForHRInternal(Int32 errorCode, IntPtr errorInfo)
at RSManagedCrypto.RSCrypto.ReencryptSymmetricKey(Byte[] symKeyBlob, Byte[] pPublicKeyBlob)
at Microsoft.ReportingServices.Library.ConnectionManager.<GetEncryptionKey>b__2()
--- End of inner exception stack trace ---;
Solution
According to the error message, you can delete encrypted content by following the steps below:
Open SQL Reporting Services Configuration Manager.
Select “Encryption Keys”.
Click “Delete” to delete all encrypted content. (Figure 2)
Figure 2.
After that, we can install SCOM reporting service again, after successfully install reporting service, we should see the SCOM operation console as below:
Figure 3.
In addition, you may also encounter other errors when installing SCOM reporting service, and the troubleshooting steps may be different. However, we can also check SQL reporting
service logs to find the root reason.
Here are some articles that would be helpful for SCOM reporting service installation and troubleshooting:
How to Install the Operations Manager Reporting Server
http://technet.microsoft.com/en-us/library/hh298611.aspx
Unable to install SCOM 2012 Reporting Services
http://blogs.technet.com/b/mdegre/archive/2013/05/27/unable-to-install-scom-2012-reporting-services.aspx
Please click to vote if the post helps you. This can be beneficial to other community members reading the thread.

Hello,
I'm afraid you must use a dedicated instance of SQL Server for each site(SCOM/SCCM). Some similar issues were disscussed on this forum:
SCCM and SCOM - SQL Server
http://social.technet.microsoft.com/Forums/en-US/configmanagergeneral/thread/bfa14da9-4692-4c64-a107-e085c967d259
SCOM, SCCM, SQL on same server?
http://social.technet.microsoft.com/Forums/en-US/configmgrsetup/thread/b5373aa7-5233-4b1f-9b39-b86e481e04d5
Thanks,
Yog Li
TechNet Community Support

The specified user domainname\user1 could not be found;

hi,
am writing script for adding the users into site collec admin group.till last week this code was working fine. but from yesday onwards, am getting this error. this user already exists in the farm and AD. etc...
thanks to Simon Doy,. i took refer.from his code:
http://blog.ithinksharepoint.com/2014/05/30/powershell-script-add-user-as-site-collection-admin-to-all-sites-in-web-application/
Add-PSSnapIn Microsoft.SharePoint.PowerShell -ErrorAction SilentlyContinue
$MasterUsernames = "in\userB#in\userC#in\userA;
$UsersNamesArray= $MasterUsernames.Split('#')
$siteCollection = Get-SPSite "http://srvr1:123/sites/engg/"
Write-Host "Setting up user $MasterUsernames as site collection admin for $siteCollection.Title " -ForegroundColor White;
   foreach($singleUserName in $UsersNamesArray)
         #$userToBeMadeSiteCollectionAdmin = $siteCollection.RootWeb.EnsureUser($Username);
         $userToBeMadeSiteCollectionAdmin = $siteCollection.RootWeb.EnsureUser($singleUserName);
         if($userToBeMadeSiteCollectionAdmin.IsSiteAdmin -ne $true)
                   Write-Host "$singleUserName is not site admin"
                  #pause
                   $userToBeMadeSiteCollectionAdmin.IsSiteAdmin = $true;
                   $userToBeMadeSiteCollectionAdmin.Update();
                  Write-Host "User is now site collection admin for $siteCollection" -ForegroundColor Green;
       else
            Write-Host "User is already site collection admin for $siteCollection" -ForegroundColor DarkYellow;
Write-Host "Current Site Collection Admins for site: " $siteCollection.Url " " $siteCollection.RootWeb.SiteAdministrators;
can anyone pls point me why am getting this error suddenly.this is working code and am getting this error only for a particular user.
am getting this error.
Exception calling "EnsureUser" with "1" argument(s): "The specified user domainname\userA;
could not be found."
At C:\powerscripts\AddUsers_SiteCollecAdmin.ps1:20 char:10
+          $userToBeMadeSiteCollectionAdmin = $siteCollection.RootWeb.EnsureUser($ ...
+ ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
    + CategoryInfo          : NotSpecified: (:) [], MethodInvocationException
    + FullyQualifiedErrorId : SPException

Hi Sadomovalex,
am using Windows Claims only, not FBA.the issue started only 2 days back. it was working fine till last week.
note: i was creating site collections with dedicated content db through powershell and adding metadata , contents types, doc libs, association etc etc kind of jobs. After end user found some bugs in my site collec .we thought of dropping the site collec
and db and recreate it again. this was repepated multiple times. 2 days back i was performing this - recreatng the same sitecollec and content db - [ after deletion ] it recreated. and end user came to me for adding few members as sitecollec
admin.s since this is a routine task, i wrote this powershell.

Automation Open: the specified object can not be creatable

Hi,
When i try interfacing TestStand with labView 7.1,the Acrivex Automation open is throwing the error mentioned above.
The object its refering is "Sequence Context" of Test Stand.I could set other properties of TestStand from LabView 7.1 FDS,
only if this object is created .Why is it do?.
jeyaseelan P
AutoTEC Systems Pvt Ltd,
Bangalore-46

Hi Jeyaseelan,
To load your steps limits from a LabVIEW VI, I would recommend taking the following steps:
1) Start from TestStand, and create a new "Action" step type named something like "Load Limits". Right click on the newly created step and select "Specify Module", then "Create VI".
2) Within your VI, load test limits from a file format of your choosing (ASCII should be the simplest). The Read From Spreadsheet File subVI should work great for this.
3) Next, you need to look up specific steps in your sequence and programatically change the limits. Right click on the Sequence Context input to your VI, and select Create >> Property >> Sequence. On the "Sequence" output of that property node, right click once again and select Create >> Method >> Get Step by Name. Enter the appropriate step name and group.
4) Finally, right click on the "step" output of the previous invoke node, and select Create >> Method >> AsPropertyObject. Right click on the property object, and click Create >> Method >> SetValNumber. For the lookup string parameter, enter "limits.low" or "limits.high". The options should be set to 0, and the newvalue input should contain your limit value (obtained from text file).
After this, you can definitely customize the VI to meet your needs. For example, you could automatically go through every step in your sequence and detect which ones are numeric limit tests, then set the limits of those tests using data from a text file.
I hope this helps! Please let me know if you need any more information and I would be glad to assist you further. Have a great day!
Regards,
Casey Weltzin
Applications Engineer
National Instruments

'MAPI Session Handle' of the NGW 'Object Request Broker' could not be accessed (0x80004005) on attempt to get an address book

Hi!
When I try to access GW address book by calling
DIGWAccount6::GetSystemAddressBook, or DIGWAccount6::AddressBooks, or even
DIGWMessage::Send, I'm getting messagebox with title "Address Book Error"
and message: "The 'MAPI Session Handle' of the Novell GroupWise 'Object
Request Broker' could not be accesses. The address book cannot run (error:
status: 0x80004005)."
I'm using .NET and I only get this error when I create a console
application. With windows application everything goes fine.
I've tried reinstalling GW client, running fixmapi utility, installing
different versions of MAPI CDO, but still got this problem.
Any ideas?

In the Application object.
>>> On Monday, July 26, 2010 at 4:16 PM,
shutchinson<[email protected]> wrote:
> Where would we set this?
>
> Thanks!
>
> Scott
>
> Preston Stephenson;1755943 Wrote:
>> Do you need to use the MAPI address book providers?
>> Can you use MultiLogin and set MultiLoginAddressBookSupport = TRUE?
>>
>> Preston
>>
>> >>> On Tuesday, November 11, 2008 at 4:22 AM, Vladimir
>> Iofik<[email protected]>
>> wrote:
>> > Hi!
>> > When I try to access GW address book by calling
>> > DIGWAccount6::GetSystemAddressBook, or DIGWAccount6::AddressBooks, or
>> even
>>
>> > DIGWMessage::Send, I'm getting messagebox with title "Address Book
>> Error"
>>
>> > and message: "The 'MAPI Session Handle' of the Novell GroupWise
>> 'Object
>> > Request Broker' could not be accesses. The address book cannot run
>> (error:
>>
>> > status: 0x80004005)."
>> > I'm using .NET and I only get this error when I create a console
>> > application. With windows application everything goes fine.
>> > I've tried reinstalling GW client, running fixmapi utility,
>> installing
>> > different versions of MAPI CDO, but still got this problem.
>> >
>> > Any ideas?

Get-ChildItem with -LiteralPath is throwing "The specified wildcard character pattern is not valid" when filenames contain brackets

I'm trying to get a list of folders in a hierarchy that don't contain any mp3 files. (The goal here is to eventually clean up all the "empty" folders that only have album art, thumbs.db, desktop.ini, etc. files left). So I wrote a quick PowerShell
command to try to do this. But it doesn't seem to be working.
I already checked out this thread <Get-ChildItem
SomeFile[].txt occurs error because of the [brackets]: "specified wildcard pattern not valid"> and I think I'm using LiteralPath correctly. Any other hints for troubleshooting this problem? Here's the command I'm using.
Get-ChildItem -Recurse -Directory | ?{
@( @(Get-ChildItem -LiteralPath $_.FullName -Recurse) | ?{
$_.Extension -eq ".mp3"}).Count -eq 0 }
This is on the latest version of PowerShell found in Windows Technical Preview.

Fair enough, but it still doesn't answer the original question- why isn't this working with -LiteralPath when the path contains brackets?
Get-ChildItem -Recurse -Directory | ?{
@( @(Get-ChildItem -LiteralPath $_.FullName -Recurse) | ?{
$_.Extension -eq ".mp3"}).Count -eq 0 }
Thanks,
Ben

SCOM Reporting Server Installation Give Error The specified SQL Server instance is not valid

Hi All,
I am trying to install SCOM 2012 SP1 Reporting Server on a Windows Server 2012 running SQL Server 2012 SP1. The SQL Server also host instance for SCCM 2012 SP1 named SCCM, and not in clustered environment.
For SCOM 2012 SP1, I choose SQL instance named SCOM. At first, I successfully installed SCCM 2012 SP1 Reporting Services. I have SSRS configured to use port 80 for both SCCM and SCOM instance, and not using SSL, with IP Address settings: All assigned. SQL
Server Agent services on both instances are configured to started automatically. I could access http://scsqlserver/reports_SCCM and http://scsqlserver/reporserver_SCCM, but could not for http://scsqlserver/reports_SCOM and http://scsqlserver/reporserver_SCOM.
On OpsMgrSetupWizard.log give error
[12:24:53]: Error:
:CheckHttpAddressResponse failed: Threw Exception.Type: System.Net.WebException, Exception Error Code: 0x80131509, Exception.Message: The remote server returned an error: (500) Internal Server Error.
[12:24:53]: Error:
:StackTrace: at System.Net.HttpWebRequest.GetResponse()
at Microsoft.EnterpriseManagement.OperationsManager.Setup.ReportingComponent.CheckHttpResponseFromSRSUrl(String httpSite)
I may continue Reporting Server installation that give no error mentioned above, if I choose SSRS instance named SCCM, but it is not supported for both SCCM and SCOM 2012 using same SSRS instance. Personal certificate for ConfigMgr SQL Server Authentication
on SQL Server has been exported and deleted. Restarting SQL Server also has been done, but no luck.
Many thanks for your help.

Hello,
I'm afraid you must use a dedicated instance of SQL Server for each site(SCOM/SCCM). Some similar issues were disscussed on this forum:
SCCM and SCOM - SQL Server
http://social.technet.microsoft.com/Forums/en-US/configmanagergeneral/thread/bfa14da9-4692-4c64-a107-e085c967d259
SCOM, SCCM, SQL on same server?
http://social.technet.microsoft.com/Forums/en-US/configmgrsetup/thread/b5373aa7-5233-4b1f-9b39-b86e481e04d5
Thanks,
Yog Li
TechNet Community Support

Paper Size Error: The specified custom paper size is not supported in the selected tray.

This happens when I try to print a web page using firefox. When I copy and paste the same yrl into safari and select that page in Safari it prints without a problem.

Hello Bhumika2 ,
Welcome to the HP Forums.
I see that you are having some printing issues with paper sizes.
Seeing that the operating system is 10.5, the printer is not supported on this version. I suggest that you check for apple updates and see if anything is available.
If the troubleshooting does not help resolve your issue, I would then suggest calling HP's Technical Support to see about further options for you. If you are calling within North America, the number is 1-800-474-6836 and for all other regions, click here: click here.
Thanks for your time.
Cheers,
Click the “Kudos Thumbs Up" at the bottom of this post to say “Thanks” for helping!
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
W a t e r b o y 71
I work on behalf of HP

How can i determine the specified VO is updated or not?

All
There are several VOs in my AM and the this.getDBTransaction().isDirty() method returns true once any of the vo changed but not commit. How can i figure out the specific vo to see if it is changed. i want to add customization logic for the specific vo in method beforeCommit() in AM.

Gerry,
There is no direct way of doing this for a VO.
For VO Rows, however, you can call getEntities() and loop through the returned entities calling getEntityState() on them.
John

System: Unable to find the specified object on 950...

Hi and hope you can help, I've just bought a 2nd user 9500 on eBay and all woeks fine EXCEPT when I receive a text and I try and open it I get the message above? Could the pevious owner have deleted a folder or something when he wiped all his data off?
Also, my firmware = v.04.44, how/where can I upgrade it to current firmware?
Thanks
Simon

21-Apr-2006
04:02 PM
simonpindar wrote:
Hi and hope you can help, I've just bought a 2nd user 9500 on eBay and all woeks fine EXCEPT when I receive a text and I try and open it I get the message above? Could the pevious owner have deleted a folder or something when he wiped all his data off?
Also, my firmware = v.04.44, how/where can I upgrade it to current firmware?
Thanks
Simon
Hello
I have the same problem with my handset ,but I could not found the way that I can solve this problem ,I just wanna to know ,could you solve your problem ?is it possible you explain for me what did you do exactly?
thanks

The specified object is a property, not an element. (-10008)

Similar Messages

Maybe you are looking for