The Split tool is not working for me?

I need to split one shot into two or maybe more shots.
I where choosing the split tool and I mowed it down to
the timeline, and I mowed the pointer down to the Timeline
and I where clicking in a point in the shot. The same working
procedure as I normally do when I´m working with FCP.
I have no idea of what`s wrong, but I really ned to find the
solution.

If you did this inside a "Send To..." workflow you just completely hooped the XML return trip.
Do not use the "Split" tool unless it is in a non-FCP workflow, and even then it might be better to synthesize that action with a keyframe.
Do not attempt to edit anything in COLOR.
jPo

Similar Messages

  • SPA3000 F/W 3.1.20(GW) last digit repetition within the dial plan is not working for gateway 0-4

    H/W: SPA3000
    F/W: 3.1.20(GW)
    Problem: The last digit repetition within the dial plan is not working for gateway 0-4.
    Line 1 Dial Plan: (****|<#,xx.<:@gw1>|1747xxxxxxxx.<:@gw1>)
    Dial "17474743246#" which works for gw1.
    Dial "#17474743246" which also works for gw1.
    Dial "17474743246" which doesn't work and actually goes through VoIP 1 but not gw1.
    It results in I have to specify a fixed number of digits for gw0-gw4 in the dial plan or it won't works. This could be very difficult for international calls.
    Is there any way to specify Interdigit Short Timer with <:@gw0>?
    BTW, it's strange that I have to include (****) in the dial plan to enter IVR. Without it I can't even hear any sound coming from gw1 (SIPphone). Maybe the SPA needs a factory reset. The test dial plan might look like,
    S:4,(****|*xxx.|[2-9]|xxxxx|*0<:@gw1>|1747xxxxxxx<:@gw1>|1408xxxxxxx<:@gw0>|xxxxxxxxxxxxxxxxxxxx.!)
    The last barring sequence "xxxxxxxxxxxxxxxxxxxx!" is to make sure the Interdigit Short Timer works after the last digit dialed otherwise the number will be transmitted immediately which is not preferred.

    IMHO , if there's a need for you to include *** on the dial plan to enter the IVR menu there might be a need to reset the unit.
    I believe that you can set the interdigit timer by including that on the dial plan ie: xxxxS0 just like on a hotline, i just never had a chance to try including that syntax when invoking gw0 on the dial plan , but i guess you may give it a try.

  • I have just downloaded Firefox 4 and my autofill on the google toolbar is not working for any webpages it previously worked with. Is there a way to fix this? Thanks

    Question
    I have just downloaded Firefox 4 and my autofill on the google toolbar is not working for any webpages it previously worked with. Is there a way to fix this? Thanks

    Crap. That's what I was afraid of...Well, since I'm away from home and not near my pc, it sounds like I'm out of luck. The problem is that I need my phone to be at least functional for making and receiving calls. There's an apple store nearby. Perhaps I can go there and have them restore it and at least I'll be able to make and receive calls until I get home and restore from my backup. Does that sound feasible, or am I missing something?
    P.s. I tried to click "correct answer" and accidentally hit "helpful". Sorry about that...

  • Elements 10 the blur tool does not work

    The blur tool does not work at all.
    How do you activate this feature.

    First try to reset "All Tools" by clicking on the down-arrow icon as shown in this picture:
    Look at the top left corner high-lighted in red box (if you can't see the picture then click on it to magnigy).
    Good luck and post back.

  • The eyedropper tool does not work with a hue saturation adjustment layer

    I am using PS CC 2014, and the problem I am having is that when I want to use the eyedropper tool to adjust the colour range affected by a Hue/Saturation adjustment layer, rather than selecting the colour in the Properties window for the adjustment layer, use of the eyedropper closes the properties window and changes the foreground colour in my palette.
    Here's the real hitch... the same thing happened to me at school last night where a) the Mac's are older and b) CS6 is still used.
    It's something with my user settings, to be sure, because the prof logged into his account on the Mac I was using in class to test it out, and it worked for him; we logged back into my account and it still did not work for mine.
    Any ideas?
    Thanks for any insights.
    RP

    Indeed Trevor, that did solve the problem. Clearly it was something I changed... wish I knew what. But, I have a list of all the settings changes I made before, so I can figure it out by making one at a time then checking...
    RP

  • The Help Link from the Application Pages Does not Work for Peoplesoft Campus Solutions 9.0

    Hi everyone.
    I have a problem, I have been trying to set up the Help Link from the Application Pages for Peoplesoft Campus Solutions 9.0 according to the instructions given in the Document: http://docs.oracle.com/cd/E17566_01/epm91pbr0/eng/psbooks/EnablingtheHelpLinkfromApplicationPages.pdf ,  (referenced in the Doc ID 1289101.1, E-PB: How to Set Up the Context Sensitive Help with Hosted PeopleBooks using Universal Linking).
    I follow the instructions of that document carefully:
    I go to: PeopleTools -> Web Profile -> Web Profile Configuration
        2. Then I choose the Web Profile: "Development".
        3. Then Change the value for the Help URL field by entering the following URL format: http://www.oracle.com/pls/topic/lookup?id=%CONTEXT_ID%&ctx=hrcs90r5 , the ctx parameter selected is the one that correspond to  the Campus Solutions (hrcs90r5) according to the Product Line Code Table (ULinkID) especified in the mentioned document.
        4. Stop the Web Domain and Clear cache.
        5. Start the Web Domain again.
    After setting up the Web Profile Configuration I test the help links, thas is why I click in the Help link in any Peoplesoft CS 9.0 Application Page (modify a person), but the next error message appears: "We're sorry, the topic you requested was not found.".
    I tried many combinations with the ctx parameters URL but it does not work yet. 
    I did the same test, but this time using the Help URL field with a HRMS ctx parameter by entering the following URL format: http://www.oracle.com/pls/topic/lookup?id=%CONTEXT_ID%&ctx=hcm92pbr5 , and It works fine !!!
    According to the previous test you realize that It works with HRMS ctx parameter but not with Campus Solutions 9.0 ctx parameter,  Does anybody know what else can I do ? Am I doing anything wrong or missing? or maybe the Oracle's ctx parameter for Campus Solutions URL It is broken simply.
    Thanks for you help and feedback.

    2799444 - The page you are testing with appears to be a Workforce Administration page. Is that correct?
    The CS PeopleBooks would only work for CS pages, e.g.: try navigating to Main Menu > Campus Community > Personal Information > Add/Update a Person
    Also, you can use multiple ctx parameters:
    E.g.: http://www.oracle.com/pls/topic/lookup?id=%CONTEXT_ID%&ctx=hrcs90r5&ctx=hcm92pbr5&ctx=pt852pbh2
    This way the help would work for the HR related pages like Workforce Administration, Campus Solutions pages like Campus Community and also PeopleTools pages like Web Profile Configuration. Hope this clarifies your question. Thanks!

  • The highlighting tool is not working

    The highlighting tool is not working

    Hi,
    Could you please share the relevant PDF with us at [email protected] so we could investigate the issue?
    Thanks,
    Gaurav

  • The Text Tool is not working in Photoshop CC

    When I try to use the text tool nothing happens when I type even though the font size is 12, and the color is black, on a white background, and then when I try to get out of the text tool a progress bar shows up that says "Rendering type", and the progress bar is not done until for 15 minutes later. After that no text shows. I tried to wave the text tool cursor over where I used it previously, and the cursor does not detect any text in the area.
    This is a brand new install of photoshop, I haven't done any customizations to it.
    My operating system is a Mac with OS X 10.7.5.
    Things I tried already:
    - I tried uninstalling, and reinstalling Photoshop CC, and Creative Cloud.
    - I tried changing font size, color. Each took 15 minutes because of the rendering type progress bar.
    - I tried changing to main fonts like Verdana, Arial, etc.
    - I did the steps on this Font troubleshooting page:
    http://helpx.adobe.com/photoshop/kb/troubleshoot-fonts-photoshop-cs5.html
    These were the steps on that page:
    - Make sure Photoshop is the most recent version.
    - Turn font preview off.
    - Remove specified fonts known to cause trouble.
    - Empty the photoshop font cache
    - Empty the operating system font cache
    - Try removing all but one font on the Mac, and keep rest in another folder.
    - Use their font test script.
    Now the only font I have in my Mac Fonts folder is Arial.ttf
    I did all these things, and the problem still happens. Every other tool is working for me though! I need to use photoshop for a graphic design job I need to get done. Any help would be greatly appreciated!

    I found out the problem! When I pressed "File" > "New" to make a new document I typed in 1000, but I'm used to the measurements being in pixels, not inches. The new install had it in inches lol. The canvas was humungous! Once I set it back to a smaller size the text tool worked great! I feel silly I over looked that!

  • The type tool is not working on new projects - although I can use it on an existing one?

    My type tool has stopped working on projects - although I can see the letters in the layer grid when I press save - they are just not showing up on the project itself.  Thank you for any help you can give me!

    Nope they are different colors - the cursor doesn't move!

  • The readOutLoud tool is not working why is this happening?

    i need help using this tool, the reading tool, when i try to activate it in the VIEW menu, and  then selecting "read only this page"  only generates an error  or the program shut down. i have installed already the complemet for reading  but its still not working i have the 10.1.7 version.
    When i check in the help menu, the option "about plug-in in adobe" says tha the readaouloud.api is not loaded, but i just cant find where to activate it.
    plaese i need help is urgent i have to much reading work

    Hi,
    Could you please share the relevant PDF with us at [email protected] so we could investigate the issue?
    Thanks,
    Gaurav

  • Help! The liquify tool is not working as expected in Photoshop CC.

    I have used CS5 for a couple years and used the liquify tool very frequently without issue. I subscribed to Photoshop CC 2 weeks ago and have been having this problem with the tool:
    When I use Bloat, Pinch or Reconstruct, it seem to over-do its function and completely distorts the photo, even with a single click. If I move the cursor even a millimeter, the whole image gets sucked into a blank circle the size of the brush. See examples (I used Bloat for these):
    Single Click with Brush Density 50:
    Single Click with Density 0:
    Moved the cursor a tiny bit to the right:
    I have tried adjusting the brush density, brush rate. I have reloaded Photoshop several times. I searched online for a solution and tried the "Kelby trick" by pressing Shift while starting up Photoshop. None of those work. I have only had CC for two weeks and have not changed any settings (except increased history states to 99) and have not installed any plug-ins or anything.
    Any ideas how to fix this? It used to be one of my favorite tools!

    OK, that's strange.  I see you have brush pressure set at 1, and the other settings are sensible, so a bit of a mystery.  Have you tried both mouse and tablet?  If it happens with one and not the other you could check that device's settings.  Might be down to deleting preferences unless someone else has a bright idea.

  • The pencil tool is not working correctly

    I've been making my drawing with the pencil tool obviously. After I make a stroke, I continue it with the last anchor point. But sometimes when I do that, the previous stroke disappears completley. Why is that?

    That's because Illustrator has got a pretty lame understanding about what should happen when you continue a path in certain angles while the Modify selected paths option is turned on inside the Pencil Tool options.
    You can disable that option but I can imagine that this is not what you're really looking for.

  • The obfuscating tool Dasho not working with jre 1.5

    I have a issue that Dasho (newer and old versions )does not work with JDK 1.5 . Earlier we used JDK1.4 version in which it works.
    Have anyone faced this issue or worked the dasho please give some idea .

    We made the move from DashO to yGuard (for various reasons)
    before we made the move from JDK 1.4 to JDK 1.5.
    Google suggests DashO supports JDK 1.5, even JDK 1.6; [DashO change log|http://www.preemptive.com/dasho-change-log.html].
    Preemptive Solutions offer support.

  • The type tool is not working

    I upgraded from PSE9 to CS5 and I can no longer view any of the fonts or use the type tool in either program.  What do I need to do to fix this issue?  Thanks for any help!  Cindy

    Hi Cindy,
    You've posted on the AIR Performance forum, and I *think* you'll want to repost in either the Photoshop CS5 or Photoshop Elements forums.  You might also try the Creative Suite forum.
    Thanks,
    Chris

  • The blue ray menu not working for Adobe Premiere Eelemnts 13

    Hi , I bought Adobe Premiere Elements 13 while and when I using the software to create a Blue Ray disc, the final disc is not function at all after write. I have the same problem in Adobe Premiere Elements avuto 12. I try to use the software on the another computer and I have the same problem. Another problem is that the software writes up to 70% not 100% of the disk to create a Blue Ray Disc. Does anyone have any idea how I can solve these problems? How can notify the Adobe software on these issues? Thank you.

    DVi
    Thanks for the reply.
    1. You say that you are using the Quality area with check mark next to "Fit contents to Available Space", but what are the readings there
    for Space Required and Bitrate when you have your Blu-ray disc in the burner tray and you have Status = Ready in the burn dialog?
    What capacity disc are you using - BD-R 25 GB or BD-RE DL 50 GB?
    2. I understand that you have Premiere Elements 7 and can create a Blu-ray disc format with disc menus on Blu-ray disc with it. Is 7 on the same computer as 13 and using the same burner and disc?
    Did I understand correctly
    a. You can create the Premiere Elements Blu-ray disc format on Blu-ray disc WITHOUT menus and you have no problems with playback on your player, but you cannot do that if you include the disc menus?
    If that is the case, what specific disc menu are you using? And, how many Timeline menu markers have you placed on the Timeline beforehand?
    How many main menu pages and how many scene selection pages results as a result?
    On the Blu-ray format on Blu-ray disc with disc menus that are failing, is the preference for Intel HD Graphics 2000 and Higher enabled or disabled?
    If your Timeline content will be generating a Blu-ray ISO Image greater than 1 GB, there can be more problems. Please see
    ATR Premiere Elements Troubleshooting: PE 13: ISO Image File Size Issue
    Please review the above and supply the details mentioned, and then we can decide on a troubleshooting plan.
    Thank you.
    ATR

Maybe you are looking for