The successor activity begins on the same date as the predecessor finishes.
How do I extend the working hours for each activity. I am currently encountering this problem.
My calender is set as 8 hours day, 0800hr - 1700 my activity are as follow -
Activity ID Activity Name Start Finish
A1020 1 16-May-12 08:00 16-May-12 17:00
A1010 2 17-May-12 08:00 17-May-12 17:00
A1000 3 18-May-12 08:00 18-May-12 17:00
But when I change the calender to a 10 hour work day, it becomes
Activity ID Activity Name Start Finish
A1030 1 16-May-12 08:00 16-May-12 17:00
A1040 2 16-May-12 17:00 17-May-12 15:00
A1050 3 17-May-12 15:00 18-May-12 12:00
Is there anyone to change is such that my all my activity starts at 0800hr and finishes at 1900hr (10hour work day)?
I have changed my settings in 'Admin Preference' ->'Time Period' ->'Hours per Time Period' to 10 hours/day and selected the "Use assigned calender to specify the number of work hours for each time period". But its still the same.
Edited by: 934917 on May 17, 2012 5:01 PM
Simply change your "Original Duration" from 8 hours to 10 hours. If it is a lot of activities, perform a global change that says: If(Original Duration = 8h) Then(Original Duration = 10h), or if you prefer Then(Original Duration = Original Duration + 8h)
Similar Messages
-
Trigger problem -- can't insert the same data into audit table
Sir/Madam,
I'm trying to use insert trigger with a 'long raw' datatype data for my audit purpose. Each time, the data of original table can be inserted correctly. While the trigger for audit table in which it contains almost the same data as original would failed. The error messages are some thing like following:
java.sql.SQLException: ORA-01461: can bind a LONG value only for insert into a LONG column
ORA-06512: at "CORPSEC.TI_ARCHIVE_PDF", line 9
ORA-04088: error during execution of trigger 'CORPSEC.TI_ARCHIVE_PDF'
If the column with 'long raw' datatype is taken out, then there is no error at all. I'm using Oracle 8i 8.1.6 for Windows NT and suspect there is bug in PL/SQL execution.
The following are SQL text for the trigger:
CREATE OR REPLACE TRIGGER "CORPSEC"."TI_ARCHIVE_PDF" AFTER INSERT ON "ARCHIVE_PDF" FOR EACH ROW DECLARE
LOG_SEQ_NO NUMBER;
BEGIN
SELECT AUDIT_SEQ.NEXTVAL INTO LOG_SEQ_NO FROM DUAL
insert into ad_archive_pdf (DOC_TITLE,PDF_FILENAME,CONTENT,DOC_DESC,AUDIT_REF_NO,AUDIT_DATE,AUDIT_MODE,AUDIT_BY)
values (:new.DOC_TITLE,:new.PDF_FILENAME,:new.CONTENT,:new.DOC_DESC,LOG_SEQ_NO,sysdate,'I',:new.created_by);
END;
Any help on this. Thank in advance.
Best regards,
RuijieSee here for a discussion of how to incorporate LONG datatypes into triggers:
http://asktom.oracle.com/pls/ask/f?p=4950:8:635439::NO::F4950_P8_DISPLAYID -
Hi Developer,
i have issues that i need stop or restrict the same entries provided in the selection screen parameters it should no display that data but it should give an alert message by saying the data all ready viewed or displayed.
example: organisation :getha pvt.td.
name :ramesh.
start date:10.2.2013.
these are parameter which has been displayed by clicking execute ,if provide the same value to display again it should give waring message.
Please guide me in solve the problem.
thanks.
ravi.Hi Somendra,
Thanks for your response sir , i have provided the according to your provided information sir but it was not displaying the data first time also its giving message which i have provided ,my issues is if i provide data from time should display if i provide same data next time then only it should restrict the data and give a message.
example:
types:BEGIN OF str1,
ROOMNO type zROOMNO,
NAME TYPE zname3,
BRANCH type zBRANCH,
PHONENUMBER type zPHONENUMBER,
END OF str1.
data:it_str1 type TABLE OF str1,
wa_str1 type str1.
SELECTION-SCREEN BEGIN OF BLOCK b1 WITH FRAME .
skip.
PARAMETERS:s_roomno type ZTABLE_2-roomno.
skip.
parameters:s_name type ztable_2-name.
skip.
PARAMETERS:s_branch type ztable_2-branch.
skip.
PARAMETERS:s_pho type ztable_2-phonenumber.
SELECTION-SCREEN END OF BLOCK b1.
AT SELECTION-SCREEN.
SELECT roomno
name
branch
phonenumber from ztable_2 into TABLE it_str1
WHERE roomno eq s_roomno and name eq s_name and branch eq s_branch and phonenumber eq s_pho.
READ TABLE it_str1 INTO wa_str1 with KEY roomno = s_roomno name = s_name branch = s_branch phonenumber = s_pho.
if sy-subrc eq 0.
MESSAGE 'THE DATA IS ALL READY VIEWED' TYPE 'E'.
RETURN.
ENDIF.
START-OF-SELECTION.
SELECT roomno
name
branch
phonenumber from ztable_2 into TABLE it_str1
WHERE roomno eq s_roomno and name eq s_name and branch eq s_branch and phonenumber eq s_pho.
loop at it_str1 into wa_str1.
WRITE:/1 wa_str1-roomno,
10 wa_str1-name,
30 wa_str1-branch,
60 wa_str1-phonenumber.
ENDLOOP.
please guide me in solving the issue sir.
thanks,
Ravi -
When ever enter the date start date up to next year same date between the days divided into 8 parts
when ever enter the date start date up to next year same date between the days divided into 8 parts
Q1.1 (YYYY) = 1st half of Quarter 1 for year YYYY
Q1.2 (YYYY) = 2nd half of Quarter1 for year YYYY
Q2.1 (YYYY) = 1st half of Quarter 2 for year YYYY
Q2.2 (YYYY) = 2nd half of Quarter 2 for year YYYY
Q3.1 (YYYY) = 1st half of Quarter 3 for year YYYY
Q3.2 (YYYY) = 2nd half of QuarterQ3 for year YYYY
Q4.1 (YYYY) = 1st half of Quarter 4 for year YYYY
Q4.2 (YYYY) = 2nd half of Quarter 4 for year YYYY
Here YYYY depicts the year.
e.g. Q1.2 (2014) depicts the 2nd half of Quarter 1 for year 2014.
The description of these values are explained below.
The table below provides the description about each value:
Quarter Quarter Range Start Date
Q1.1 1 Jan - 15 Feb 1st Jan
Q1.2 16 Feb-31 Mar 16th Feb
Q2.1 1 Apr- 15 May 1st Apr
Q2.2 16 May-30 June 16th May
Q3.1 1 Jul-15 Aug 1th Jul
Q3.2 16 Aug -30 Sep 16th Aug
Q4.1 1 Oct -15 Nov 1st Oct
Q4.2 16 Nov – 31 Dec 16th Nov
The dropdown values in time window needs to be updated as per date entered by the user in the Audit Plan start date and
should display the next four Quarter (each divided in 2 half i.e. Eight values ) along with the year from the selected Audit plan start date.
for eg. If the Plan start date is given as August 10 2013 then the Time window will display the following options:
Q3.2 (2013)
Q 4.1 (2013)
Q 4.2 (2013)
Q 1.1 (2014)
Q1.2 (2014)
Q2.1 (2014)
Q 2.2 (2014)
Q 3.1 (2014)
You can refer to the Table above and look that 10 Aug 2013 falls under the Q3.1 so Time window will display the next next 8 half Quarters ( Total 4 Quarter) till Q 3.1 for the year 2014.Hello,
WITH half_quarters AS(
SELECT ADD_MONTHS(TRUNC(DATE '2013-08-15','Q'), 3*(LEVEL - 1)) hq_start
,1 part
FROM dual
CONNECT BY ROWNUM <= 5
UNION ALL
SELECT ADD_MONTHS(TRUNC(DATE '2013-08-15','Q'), 3*(LEVEL - 1) + 1) + 15 hq_start
,2 part
FROM dual
CONNECT BY ROWNUM <= 5
,ordered_half_quarters AS(
SELECT hq_start
,part
,ROW_NUMBER() OVER (ORDER BY hq_start) r
FROM half_quarters
WHERE hq_start > DATE '2013-08-15'
SELECT 'Q '||TO_CHAR(hq_start,'Q')||'.'||part||' ('||TO_CHAR(hq_start,'YYYY')||')' q
FROM ordered_half_quarters
WHERE r <= 8
ORDER BY r;
Q
Q 3.2 (2013)
Q 4.1 (2013)
Q 4.2 (2013)
Q 1.1 (2014)
Q 1.2 (2014)
Q 2.1 (2014)
Q 2.2 (2014)
Q 3.1 (2014)
half_quarters generates the start dates of every half of a quarter, starting with the begin of the first quarter that contains the sample date.
The next step is to order the dates and to select only those after the sample date.
The last part formats the output and orders the data.
Regards
Marcus -
When i try to reload the same data what will happen in my ods?
Hi all,
Someone has already loaded the data from flat file into the respective ods.
for instance:
customer number customer name cust address
10001 xav 123
10002 xac 234
And this has been loaded by some one else.
If i am going to load the same data in the ods. will it create 2 entries nor just going to be only one entry.
i meant will it be like this
customer number customer name cust address
10001 xav 123
10002 xac 234
10001 xav 123
10002 xac 234
nor like this
customer number customer name cust address
10001 xav 123
10002 xac 234.
Thanxs
HarithaHi,
If two Records of same key combination is there then over writing will happn in ODS. Within the request overwriting is done in the updation(from change log table to active data table). Within different request overwriting is done during activation(new data table to change log table) Zero record mode is doing this.
read this along with other replies
Thanks and regards
Obily -
Error while adding a second template to the same data definition
Hi,
I am quite new to XML Publisher. I am developing a report using XML Publisher.
I have added one template to the Data Definition. When I tried to add another Template(with different name as previous, to the same concurrent program and application) to the same Data Definition I am getting the following error.
Error: You entered a duplicate template entry. Please change the Name, Code and/or Application and reapply.
Can anyone help me out solving this problem. I am reaching my deadline. Please suggest me what can be done.
Regards,
SitaHi
Try to change the Template code name also and then check it.
Thanks
Sudheer -
CBO generating different plans for the same data in similar Environments
Hi All
I have been trying to compare an SQL from 2 different but similar environments build of the same hardware specs .The issue I am facing is environment A, the query executes in less than 2 minutes with plan mostly showing full table scans and hash join whereas in environment B(problematic), it times out after 2 hours with an error of unable to extend table space . The statistics are up to date in both environments for both tables and indexes . System parameters are exactly similar(default oracle for except for multiblock_read_count ).
Both Environment have same db parameter for db_file_multiblock_read_count(16), optimizer(refer below),hash_area_size (131072),pga_aggregate_target(1G),db_block_size(8192) etc . SREADTIM, MREADTIM, CPUSPEED, MBRC are all null in aux_stats in both environment because workload was never collected i believe.
Attached is details about the SQL with table stats, SQL and index stats my main concern is CBO generating different plans for the similar data and statistics and same hardware and software specs. Is there any thing else I should consider .I generally see environment B being very slow and always plans tend to nested loops and index scan whereas what we really need is a sensible FTS in many cases. One of the very surprising thing is METER_CONFIG_HEADER below which has just 80 blocks of data is being asked for index scan.
show parameter optimizer
optimizer_dynamic_sampling integer 2
optimizer_features_enable string 10.2.0.4
optimizer_index_caching integer 0
optimizer_index_cost_adj integer 100
optimizer_mode string ALL_ROWS
optimizer_secure_view_merging boolean TRUE
**Environment**
Oracle Database 10g Enterprise Edition Release 10.2.0.4.0 - 64bi
PL/SQL Release 10.2.0.4.0 - Production
CORE 10.2.0.4.0 Production
TNS for Solaris: Version 10.2.0.4.0 - Production
NLSRTL Version 10.2.0.4.0 - Production
Note: : There are slight difference in the no of records in the attached sheet.However, I wanted to tell that i have tested with exact same data and was getting similar results but I couldn't retain the data untill collecting the details in the attachment
TEST1 COMPARE TABLE LEVE STATS used by CBO
ENVIRONMENT A
TABLE_NAME NUM_ROWS BLOCKS LAST_ANALYZED
ASSET 3607425 167760 5/02/2013 22:11
METER_CONFIG_HEADER 3658 80 5/01/2013 0:07
METER_CONFIG_ITEM 32310 496 5/01/2013 0:07
NMI 1899024 33557 18/02/2013 10:55
REGISTER 4830153 101504 18/02/2013 9:57
SDP_LOGICAL_ASSET 1607456 19137 18/02/2013 15:48
SDP_LOGICAL_REGISTER 5110781 78691 18/02/2013 9:56
SERVICE_DELIVERY_POINT 1425890 42468 18/02/2013 13:54
ENVIRONMENT B
TABLE_NAME NUM_ROWS BLOCKS LAST_ANALYZED
ASSET 4133939 198570 16/02/2013 10:02
METER_CONFIG_HEADER 3779 80 16/02/2013 10:55
METER_CONFIG_ITEM 33720 510 16/02/2013 10:55
NMI 1969000 33113 16/02/2013 10:58
REGISTER 5837874 120104 16/02/2013 11:05
SDP_LOGICAL_ASSET 1788152 22325 16/02/2013 11:06
SDP_LOGICAL_REGISTER 6101934 91088 16/02/2013 11:07
SERVICE_DELIVERY_POINT 1447589 43804 16/02/2013 11:11
TEST ITEM 2 COMPARE INDEX STATS used by CBO
ENVIRONMENT A
TABLE_NAME INDEX_NAME UNIQUENESS BLEVEL LEAF_BLOCKS DISTINCT_KEYS AVG_LEAF_BLOCKS_PER_KEY AVG_DATA_BLOCKS_PER_KEY CLUSTERING_FACTOR NUM_ROWS
ASSET IDX_AST_DEVICE_CATEGORY_SK NONUNIQUE 2 9878 67 147 12982 869801 3553095
ASSET IDX_A_SAPINTLOGDEV_SK NONUNIQUE 2 7291 2747 2 639 1755977 3597916
ASSET SYS_C00102592 UNIQUE 2 12488 3733831 1 1 3726639 3733831
METER_CONFIG_HEADER SYS_C0092052 UNIQUE 1 12 3670 1 1 3590 3670
METER_CONFIG_ITEM SYS_C0092074 UNIQUE 1 104 32310 1 1 32132 32310
NMI IDX_NMI_ID NONUNIQUE 2 6298 844853 1 2 1964769 1965029
NMI IDX_NMI_ID_NK NONUNIQUE 2 6701 1923072 1 1 1922831 1923084
NMI IDX_NMI_STATS NONUNIQUE 1 106 4 26 52 211 211
REGISTER REG_EFFECTIVE_DTM NONUNIQUE 2 12498 795 15 2899 2304831 4711808
REGISTER SYS_C00102653 UNIQUE 2 16942 5065660 1 1 5056855 5065660
SDP_LOGICAL_ASSET IDX_SLA_SAPINTLOGDEV_SK NONUNIQUE 2 3667 1607968 1 1 1607689 1607982
SDP_LOGICAL_ASSET IDX_SLA_SDP_SK NONUNIQUE 2 3811 668727 1 2 1606204 1607982
SDP_LOGICAL_ASSET SYS_C00102665 UNIQUE 2 5116 1529606 1 1 1528136 1529606
SDP_LOGICAL_REGISTER SYS_C00102677 UNIQUE 2 17370 5193638 1 1 5193623 5193638
SERVICE_DELIVERY_POINT IDX_SDP_NMI_SK NONUNIQUE 2 4406 676523 1 2 1423247 1425890
SERVICE_DELIVERY_POINT IDX_SDP_SAP_INT_NMI_SK NONUNIQUE 2 7374 676523 1 2 1458238 1461108
SERVICE_DELIVERY_POINT SYS_C00102687 UNIQUE 2 4737 1416207 1 1 1415022 1416207
ENVIRONMENT B
TABLE_NAME INDEX_NAME UNIQUENESS BLEVEL LEAF_BLOCKS DISTINCT_KEYS AVG_LEAF_BLOCKS_PER_KEY AVG_DATA_BLOCKS_PER_KEY CLUSTERING_FACTOR NUM_ROWS
ASSET IDX_AST_DEVICE_CATEGORY_SK NONUNIQUE 2 8606 121 71 16428 1987833 4162257
ASSET IDX_A_SAPINTLOGDEV_SK NONUNIQUE 2 8432 1780146 1 1 2048170 4162257
ASSET SYS_C00116157 UNIQUE 2 13597 4162263 1 1 4158759 4162263
METER_CONFIG_HEADER SYS_C00116570 UNIQUE 1 12 3779 1 1 3734 3779
METER_CONFIG_ITEM SYS_C00116592 UNIQUE 1 107 33720 1 1 33459 33720
NMI IDX_NMI_ID NONUNIQUE 2 6319 683370 1 2 1970460 1971313
NMI IDX_NMI_ID_NK NONUNIQUE 2 6597 1971293 1 1 1970771 1971313
NMI IDX_NMI_STATS NONUNIQUE 1 98 48 2 4 196 196
REGISTER REG_EFFECTIVE_DTM NONUNIQUE 2 15615 1273 12 2109 2685924 5886582
REGISTER SYS_C00116748 UNIQUE 2 19533 5886582 1 1 5845565 5886582
SDP_LOGICAL_ASSET IDX_SLA_SAPINTLOGDEV_SK NONUNIQUE 2 4111 1795084 1 1 1758441 1795130
SDP_LOGICAL_ASSET IDX_SLA_SDP_SK NONUNIQUE 2 4003 674249 1 2 1787987 1795130
SDP_LOGICAL_ASSET SYS_C004520 UNIQUE 2 5864 1795130 1 1 1782147 1795130
SDP_LOGICAL_REGISTER SYS_C004539 UNIQUE 2 20413 6152850 1 1 6073059 6152850
SERVICE_DELIVERY_POINT IDX_SDP_NMI_SK NONUNIQUE 2 3227 660649 1 2 1422572 1447803
SERVICE_DELIVERY_POINT IDX_SDP_SAP_INT_NMI_SK NONUNIQUE 2 6399 646257 1 2 1346948 1349993
SERVICE_DELIVERY_POINT SYS_C00128706 UNIQUE 2 4643 1447946 1 1 1442796 1447946
TEST ITEM 3 COMPARE PLANS
ENVIRONMENT A
Plan hash value: 4109575732
| Id | Operation | Name | Rows | Bytes |TempSpc| Cost (%CPU)| Time |
| 0 | SELECT STATEMENT | | 13 | 2067 | | 135K (2)| 00:27:05 |
| 1 | HASH UNIQUE | | 13 | 2067 | | 135K (2)| 00:27:05 |
|* 2 | HASH JOIN | | 13 | 2067 | | 135K (2)| 00:27:05 |
|* 3 | HASH JOIN | | 6 | 900 | | 135K (2)| 00:27:04 |
|* 4 | HASH JOIN ANTI | | 1 | 137 | | 135K (2)| 00:27:03 |
|* 5 | TABLE ACCESS BY INDEX ROWID| NMI | 1 | 22 | | 5 (0)| 00:00:01 |
| 6 | NESTED LOOPS | | 1 | 131 | | 95137 (2)| 00:19:02 |
|* 7 | HASH JOIN | | 1 | 109 | | 95132 (2)| 00:19:02 |
|* 8 | TABLE ACCESS FULL | ASSET | 36074 | 1021K| | 38553 (2)| 00:07:43 |
|* 9 | HASH JOIN | | 90361 | 7059K| 4040K| 56578 (2)| 00:11:19 |
|* 10 | HASH JOIN | | 52977 | 3414K| 2248K| 50654 (2)| 00:10:08 |
|* 11 | HASH JOIN | | 39674 | 1782K| | 40101 (2)| 00:08:02 |
|* 12 | TABLE ACCESS FULL | REGISTER | 39439 | 1232K| | 22584 (2)| 00:04:32 |
|* 13 | TABLE ACCESS FULL | SDP_LOGICAL_REGISTER | 4206K| 56M| | 17490 (2)| 00:03:30 |
|* 14 | TABLE ACCESS FULL | SERVICE_DELIVERY_POINT | 675K| 12M| | 9412 (2)| 00:01:53 |
|* 15 | TABLE ACCESS FULL | SDP_LOGICAL_ASSET | 1178K| 15M| | 4262 (2)| 00:00:52 |
|* 16 | INDEX RANGE SCAN | IDX_NMI_ID_NK | 2 | | | 2 (0)| 00:00:01 |
| 17 | VIEW | | 39674 | 232K| | 40101 (2)| 00:08:02 |
|* 18 | HASH JOIN | | 39674 | 1046K| | 40101 (2)| 00:08:02 |
|* 19 | TABLE ACCESS FULL | REGISTER | 39439 | 500K| | 22584 (2)| 00:04:32 |
|* 20 | TABLE ACCESS FULL | SDP_LOGICAL_REGISTER | 4206K| 56M| | 17490 (2)| 00:03:30 |
|* 21 | TABLE ACCESS FULL | METER_CONFIG_HEADER | 3658 | 47554 | | 19 (0)| 00:00:01 |
|* 22 | TABLE ACCESS FULL | METER_CONFIG_ITEM | 7590 | 68310 | | 112 (2)| 00:00:02 |
Predicate Information (identified by operation id):
2 - access("METER_CONFIG_HEADER_SK"="METER_CONFIG_HEADER_SK")
3 - access("NETWORK_TARIFF_CD"="NETWORK_TARIFF_CD")
4 - access("SERVICE_DELIVERY_POINT_SK"="TMP"."SERVICE_DELIVERY_POINT_SK")
5 - filter("ROW_CURRENT_IND"='Y' AND ("NMI_STATUS_CD"='A' OR "NMI_STATUS_CD"='D'))
7 - access("ASSET_CD"="EQUIP_CD" AND "SAP_INT_LOG_DEVICE_SK"="SAP_INT_LOG_DEVICE_SK")
8 - filter("ROW_CURRENT_IND"='Y')
9 - access("SERVICE_DELIVERY_POINT_SK"="SERVICE_DELIVERY_POINT_SK")
10 - access("SERVICE_DELIVERY_POINT_SK"="SERVICE_DELIVERY_POINT_SK")
11 - access("SAP_INT_LOGICAL_REGISTER_SK"="SAP_INT_LOGICAL_REGISTER_SK")
12 - filter("REGISTER_TYPE_CD"='C' AND (SUBSTR("REGISTER_ID_CD",1,1)='4' OR
SUBSTR("REGISTER_ID_CD",1,1)='5' OR SUBSTR("REGISTER_ID_CD",1,1)='6') AND "ROW_CURRENT_IND"='Y')
13 - filter("ROW_CURRENT_IND"='Y')
14 - filter("ROW_CURRENT_IND"='Y')
15 - filter("ROW_CURRENT_IND"='Y')
16 - access("NMI_SK"="NMI_SK")
18 - access("SAP_INT_LOGICAL_REGISTER_SK"="SAP_INT_LOGICAL_REGISTER_SK")
19 - filter("REGISTER_TYPE_CD"='C' AND (SUBSTR("REGISTER_ID_CD",1,1)='1' OR
SUBSTR("REGISTER_ID_CD",1,1)='2' OR SUBSTR("REGISTER_ID_CD",1,1)='3') AND "ROW_CURRENT_IND"='Y')
20 - filter("ROW_CURRENT_IND"='Y')
21 - filter("ROW_CURRENT_IND"='Y')
22 - filter("ROW_CURRENT_IND"='Y' AND "CONROL_REGISTER"='X')
ENVIRONMENT B
Plan hash value: 2826260434
| Id | Operation | Name | Rows | Bytes | Cost (%CPU)| Time |
| 0 | SELECT STATEMENT | | 1 | 181 | 103K (2)| 00:20:47 |
| 1 | HASH UNIQUE | | 1 | 181 | 103K (2)| 00:20:47 |
|* 2 | HASH JOIN ANTI | | 1 | 181 | 103K (2)| 00:20:47 |
|* 3 | HASH JOIN | | 1 | 176 | 56855 (2)| 00:11:23 |
|* 4 | HASH JOIN | | 1 | 163 | 36577 (2)| 00:07:19 |
|* 5 | TABLE ACCESS BY INDEX ROWID | ASSET | 1 | 44 | 4 (0)| 00:00:01 |
| 6 | NESTED LOOPS | | 1 | 131 | 9834 (2)| 00:01:59 |
| 7 | NESTED LOOPS | | 1 | 87 | 9830 (2)| 00:01:58 |
| 8 | NESTED LOOPS | | 1 | 74 | 9825 (2)| 00:01:58 |
|* 9 | HASH JOIN | | 1 | 52 | 9820 (2)| 00:01:58 |
|* 10 | TABLE ACCESS BY INDEX ROWID| METER_CONFIG_HEADER | 1 | 14 | 1 (0)| 00:00:01 |
| 11 | NESTED LOOPS | | 1 | 33 | 116 (2)| 00:00:02 |
|* 12 | TABLE ACCESS FULL | METER_CONFIG_ITEM | 1 | 19 | 115 (2)| 00:00:02 |
|* 13 | INDEX RANGE SCAN | SYS_C00116570 | 1 | | 1 (0)| 00:00:01 |
|* 14 | TABLE ACCESS FULL | SERVICE_DELIVERY_POINT | 723K| 13M| 9699 (2)| 00:01:57 |
|* 15 | TABLE ACCESS BY INDEX ROWID | NMI | 1 | 22 | 5 (0)| 00:00:01 |
|* 16 | INDEX RANGE SCAN | IDX_NMI_ID_NK | 2 | | 2 (0)| 00:00:01 |
|* 17 | TABLE ACCESS BY INDEX ROWID | SDP_LOGICAL_ASSET | 1 | 13 | 5 (0)| 00:00:01 |
|* 18 | INDEX RANGE SCAN | IDX_SLA_SDP_SK | 2 | | 2 (0)| 00:00:01 |
|* 19 | INDEX RANGE SCAN | IDX_A_SAPINTLOGDEV_SK | 2 | | 2 (0)| 00:00:01 |
|* 20 | TABLE ACCESS FULL | REGISTER | 76113 | 2378K| 26743 (2)| 00:05:21 |
|* 21 | TABLE ACCESS FULL | SDP_LOGICAL_REGISTER | 5095K| 63M| 20245 (2)| 00:04:03 |
| 22 | VIEW | | 90889 | 443K| 47021 (2)| 00:09:25 |
|* 23 | HASH JOIN | | 90889 | 2307K| 47021 (2)| 00:09:25 |
|* 24 | TABLE ACCESS FULL | REGISTER | 76113 | 966K| 26743 (2)| 00:05:21 |
|* 25 | TABLE ACCESS FULL | SDP_LOGICAL_REGISTER | 5095K| 63M| 20245 (2)| 00:04:03 |
Predicate Information (identified by operation id):
2 - access("SERVICE_DELIVERY_POINT_SK"="TMP"."SERVICE_DELIVERY_POINT_SK")
3 - access("SERVICE_DELIVERY_POINT_SK"="SERVICE_DELIVERY_POINT_SK" AND
"SAP_INT_LOGICAL_REGISTER_SK"="SAP_INT_LOGICAL_REGISTER_SK")
4 - access("ASSET_CD"="EQUIP_CD")
5 - filter("ROW_CURRENT_IND"='Y')
9 - access("NETWORK_TARIFF_CD"="NETWORK_TARIFF_CD")
10 - filter("ROW_CURRENT_IND"='Y')
12 - filter("ROW_CURRENT_IND"='Y' AND "CONROL_REGISTER"='X')
13 - access("METER_CONFIG_HEADER_SK"="METER_CONFIG_HEADER_SK")
14 - filter("ROW_CURRENT_IND"='Y')
15 - filter("ROW_CURRENT_IND"='Y' AND ("NMI_STATUS_CD"='A' OR "NMI_STATUS_CD"='D'))
16 - access("NMI_SK"="NMI_SK")
17 - filter("ROW_CURRENT_IND"='Y')
18 - access("SERVICE_DELIVERY_POINT_SK"="SERVICE_DELIVERY_POINT_SK")
19 - access("SAP_INT_LOG_DEVICE_SK"="SAP_INT_LOG_DEVICE_SK")
20 - filter((SUBSTR("REGISTER_ID_CD",1,1)='4' OR SUBSTR("REGISTER_ID_CD",1,1)='5' OR
SUBSTR("REGISTER_ID_CD",1,1)='6') AND "REGISTER_TYPE_CD"='C' AND "ROW_CURRENT_IND"='Y')
21 - filter("ROW_CURRENT_IND"='Y')
23 - access("SAP_INT_LOGICAL_REGISTER_SK"="SAP_INT_LOGICAL_REGISTER_SK")
24 - filter((SUBSTR("REGISTER_ID_CD",1,1)='1' OR SUBSTR("REGISTER_ID_CD",1,1)='2' OR
SUBSTR("REGISTER_ID_CD",1,1)='3') AND "REGISTER_TYPE_CD"='C' AND "ROW_CURRENT_IND"='Y')
25 - filter("ROW_CURRENT_IND"='Y')Edited by: abhilash173 on Feb 24, 2013 9:16 PM
Edited by: abhilash173 on Feb 24, 2013 9:18 PMHi Paul,
I misread your question initially .The system stats are outdated in both ( same result as seen from aux_stats) .I am not a DBA and do not have access to gather system stats fresh.
select * from sys.aux_stats$
SNAME PNAME PVAL1 PVAL2
SYSSTATS_INFO STATUS NULL COMPLETED
SYSSTATS_INFO DSTART NULL 02-16-2011 15:24
SYSSTATS_INFO DSTOP NULL 02-16-2011 15:24
SYSSTATS_INFO FLAGS 1 NULL
SYSSTATS_MAIN CPUSPEEDNW 1321.20523 NULL
SYSSTATS_MAIN IOSEEKTIM 10 NULL
SYSSTATS_MAIN IOTFRSPEED 4096 NULL
SYSSTATS_MAIN SREADTIM NULL NULL
SYSSTATS_MAIN MREADTIM NULL NULL
SYSSTATS_MAIN CPUSPEED NULL NULL
SYSSTATS_MAIN MBRC NULL NULL
SYSSTATS_MAIN MAXTHR NULL NULL
SYSSTATS_MAIN SLAVETHR NULL NULL -
Multiple MM schedule lines for the same date
Hello All Gurus,
I am facing a problem where the MM schedule lines are divided into various quantites for the same date. For example on 02/11/2010 the total quantity is 120, it is appearing in the below form in ME38:
02/11/2010 - 40
02/11/2010 - 40
02/11/2010 - 40
Although this is not an error, but my client is not happy with this. Can someone tell me why I am getting this error? Is it because of the rounding value that we maintain in MRP 1 view of material master record? Or is there any other setting that I am missing?
Please let me know. I would be very much thankful to you.
Thanks and Regards,
UmakanthHi,
Before changing the setup, note that sometimes it is beneficial to split one demand into multiple delivery schedules. Especially if the demand is bigger than equipment type (container/truck etc.). If you want to manage inbound transportation for such delivery schedules, it is much simpler to do this when each delivery schedule is not bigger than one equipment.
Regards,
Dominik Modrzejewski -
Multiple repeating SubForms binding to the same data node
Having multiple repeating SubForms binding to the same data node : In our documents, many times we need to display information from same table in multiple locations. For example, if document displays information of Insureds on one page and information of drivers on another page, we need to create a LiveCycle document with two SubForms. Each SubForm needs to have a repeating binding to CommonInsured element in XSD. LiveCycle Designer is not able to handle such case. We cannot have two subforms bound to the same node, ONLY in a case where repeating option is selected for data binding.
The only way I have found out is the following Javascript
//Get the data node from XML. You will find the code for this function in //JavaHelperFunctions library.
// InsuredDataRepeatingSubForm is a second subform.
//You need to manually add instances to this subform at the
//runtime and Insured data to each instance.
var insuArray = JavaHelperFunctions.getInsureds();
var i=0;
for( i=0; i<insuArray.length; i++)
if (i>0)
var thesubform = this.InsuredDataRepeatingSubForm.instanceManager.addInstance(i);
thesubform.InsuredName.rawValue = insuArray[i].fullName.value;
else
this.InsuredDataRepeatingSubForm.InsuredName.rawValue = insuArray[i].fullName.value;
Is there any way I can achieve directly using bindings since we are trying to minimize javascript that changes the layout of the form?
Thanks in advance!Unfortunately not. I've spent countless hours/days trying to do the same thing. You have to use code. The form consumes all the data it can into the repeating elements until there is none left and it is not reused.
Here's a function I wrote just for that purpose. Feel free to use it:
function loadData(source,target){
target.setInstances(source.count);//set the target's subform instances to match the source's
for (var a=0;a<source.count;a++){//loop through each subform instance
var sourceSubform=source.resolveNode(source.name.substr(1)).all.item(a);
var targetSubform=target.resolveNode(target.name.substr(1)).all.item(a);
for (var b=0;b<sourceSubform.nodes.length;b++){//loop through the children of each
if (sourceSubform.nodes.item(b).className=="field" && targetSubform.resolveNode(sourceSubform.nodes.item(b).name)!=null)//check for matching fields
if (typeof(targetSubform.resolveNode(sourceSubform.nodes.item(b).name).value.exData)=="undefined" ||
typeof(targetSubform.resolveNode(sourceSubform.nodes.item(b).name).value.exData.body)=="undefined")
targetSubform.resolveNode(sourceSubform.nodes.item(b).name).rawValue=sourceSubform.nodes.item(b).rawValue;
else
targetSubform.resolveNode(sourceSubform.nodes.item(b).name).value.exData.loadXML(sourceSubform.nodes.item(b).value.exData.saveXML(),1,1);
if (sourceSubform.nodes.item(b).className=="instanceManager" && targetSubform.resolveNode(sourceSubform.nodes.item(b).name)!=null)//check for matching subforms
loadData(sourceSubform.nodes.item(b),targetSubform.resolveNode(sourceSubform.nodes.item(b).name));
Just make sure the source and target subform hierarchies are identifal, same name and all. It will recurse down the tree and transfer source fields (rich text and plain) to their sister targets.
Kyle -
How to prevent multiple users from updating the same data in coherence
Hi,
I have a Java Web Application and for data cache am using coherence 3.5. The same data maybe shared by multiple users which maybe in hundreds. Now how do I prevent multiple users from updating the same data in coherence i.e. is there something in coherence that will only allow one user a time to update. If one user is in a process of updating a data in coherence and some other user also tries to update then the second user should get an error.
ThanksI have a question on the same line. How can I restrict someone from updating a cache value when I a process is already working on it. I tried locking the cache key but it does not stop other process to update it , it only does not allow other process to get lock on it.
-
can we with ligthroom have the sofware set up on multiples computer mac and mc and share the same dat base library?
No, a Lightroom catalog cannot be on a networked drive, and can only be accessed by a single user at a time.
-
Sharing the same data on two macs
Hello, I have two Macs and would like to keep the same data on each laptop. I don't think iSync is the tool for the job. Can anybody out there advise of an easy affordable method of ensuring both my machines are sharing the same data; itunes, photo's, files, etc.
Many thanks.Get FoldersSynchronizer You can set up a selection of folders and sync them between two Macs.
-
Multiple reads of the same data from Multiprovider by Query (Bex)
Hello, guys!
We're having issue with performance of a query built on Multiprivider. During our investigation, we've found out that within one run of a Query, it several times refers to InfoProvider for the same data (see image attached).
Do you have ideas what can be a reason for multiply reads of the same data from Multipvovider?Hello Nikita,
By "copy of a query" i meant something like this as shown below :
*Kindly click on the screenshot for a better view.
1) See the highlighted portions below in the screenshot . See Query 2 highlighted and name of the BEx query highlighted.
2) See the highlighted portions . See Query 3 highlighted and name of the BEx query highlighted.
As you can see from the above screenshots i have used the same BEx query 2 times by the name of Query 2 & Query 3 . Infact i have not attached the complete screenhsot . In that i have used it 6 times.
I have to analyze this a bit in detail but what i am guessing is that when this WEBi is called the single BEx is also called multiple times. And hence it hits the Info Provider multiple times resulting in a decreased performance.
But this does not mean that this is wrong approach. There are various areas where you can improve for example :
1) Either improve your BEx query if possible or use aggregates or something like that .
2) Use the Query stripping setting in WEBi so that unused dimensions and measures are not pulled resulting in an improved performance. It's switched on by default.
Thanks!!
Regards,
Ashutosh Singh -
The system I am trying to create calculates a number of values based on an input. I need to make the calculations and display the values for an entire production run and for each hour. The only way I know to do this is to create two while loops, one looking at all the values that are received and one looking only at the values for hour long periods.
Any help would be great.
Thanks
RossHWhy do you think that you have to have two loops to accomplish this task? Why not use one loop and accumulate the same data into two data sets based on the two sets of criteria?
-
How do I sync 2 devices to the same data?
I have a life drive and my wife has a treo 650. We both wish to synchronize with the same data on our pc.How do we do that?
Post relates to: LifeDrive
Message Edited by thetreoguy on 04-09-2009 05:54 PMLook for a program called "SyncUs". That's what it's designed to do - sync two calendars, etc. with two devices.
WyreNut
I am a Volunteer here, not employed by HP.
You too can become an HP Expert! Details HERE!
If my post has helped you, click the Kudos Thumbs up!
If it solved your issue, Click the "Accept as Solution" button so others can benefit from the question you asked!
Maybe you are looking for
-
Correction feature from keyboard no longer working
After installing the last iPhone software update 1.0.2, I noticed that the correction feature from the keyboard is no longer working, does not pop-up to suggest corrections or words. Even if I prefer this feature off since it let me type faster, I am
-
Very frustrating...under the Windows "Programs/Uninstall a program" list, Mozilla Thunderbird is still listed AFTER I have removed it completely (I thought) from my computer. I have clicked on "uninstall" several times and nothing happens. I resent t
-
IdeaCentre K230 w/ Vista & Geforce 2 MX400 PCI
I have an issue adding a Geforce 2 MX400 PCI to my IdeaCentre K230. No matter what I choose in the BIOS for the video option, the PC will only recognize one video output at a time. If I set the BIOS to load the onboard primary, the device manager o
-
Hi, Previously I installed the BI statistics manually (not over SPRO). During the activation the system created datasources in all conected systems like R/3 dev. system. Also the activated process chains include the delta loads from these R/3 based d
-
Where is the authorize computer on itunes?
i went to itunes store but dont see any where where it says authorize computer