The time characteristic consistency check has produced an error DBMAN 62
Hi
We are getting an error while updating to one target as The time characteristic consistency check has produced an error""
* Checked the respective PSA data field which is fine. Dates are in correct format.
* RSRV ran for the particular target. It had error but the jobs were successful till yesterday.
* Data from 01.05.2014 is having the problem ( Which I got from the record number in PSA )
NB: We are running on HANA database but the respective target is not yet HANA Optimised
Details Figures Attached
Any Idea.. What could have gone wrong
Regards
Reshoi R
Hi
Record Number 2995 is shown in the figures attached.
I have already carried out the deletion and automatic repair mentioned in RSCV061 even before posting this question but of no use ( I have shown that also in the figures attached at the posting time.
Reporting is fine. The problem is while loading the data to the cube. The loading is fine till date 30.04.2014 but from the date 01.05.2014. The record is error while updating.
The cube is partitioned from month 01.2008 to 12.2015.
Regards
Reshoi R
Similar Messages
-
Grid Control 11g Agent: The free port availability check has failed.
I tried to use 11g Grid Control agent deployment wizard to install 11g agent to an Oracle Enterprise Linux 5 (64 bit) server, but received following error message:
PROBLEM : The free port availability check has failed.
ERROR : Check complete. The overall result of this check is: Not executed <<<<
RECOMMENDATION : Please free one of the ports in the required range
The port I used is the default one - 3872. I used "netstat -a |grep 3872" to check if this port is in use, the "netstat" command returned nothing, so I think this port is free. I tried to leave the "Port" field empty and let Oracle automatically pick a free port, I still got the same error message.
According to the log file,
more prereq2010-11-22_10-42-27AM.out
Starting execution of Prerequisites...
Total No of checks: 12
Performing check for CheckPortAvailability
Checking for the availability of free ports in the required range.
Loading file /opt/oracle/product/11.2.0/dbhome_1/localhost.localdomain_xxx//sysman/config/emd.properties to get the busy ports: Successful
Loading file /opt/oracle/product/11.2.0/dbhome_1//sysman/config/emd.properties to get the busy ports: Successful
Port specified by user null is not available
Check complete. The overall result of this check is: Not executed <<<<
Check complete: Not executed <<<<
S_UNKNOWN_HOST_EXEPTION_BEFORE_CHECK: An unknown host exception encountered during the Port Pre Req Check.
Recommendation: You must free one of the ports in the required range.
Did someone encounter a similar problem before? Thanks for your help.
Amos814475 wrote:
I tried to use 11g Grid Control agent deployment wizard to install 11g agent to an Oracle Enterprise Linux 5 (64 bit) server, but received following error message:
PROBLEM : The free port availability check has failed.
ERROR : Check complete. The overall result of this check is: Not executed <<<<
RECOMMENDATION : Please free one of the ports in the required range
The port I used is the default one - 3872. I used "netstat -a |grep 3872" to check if this port is in use, the "netstat" command returned nothing, so I think this port is free. I tried to leave the "Port" field empty and let Oracle automatically pick a free port, I still got the same error message.
According to the log file,
more prereq2010-11-22_10-42-27AM.out
Starting execution of Prerequisites...
Total No of checks: 12
Performing check for CheckPortAvailability
Checking for the availability of free ports in the required range.
Loading file /opt/oracle/product/11.2.0/dbhome_1/localhost.localdomain_xxx//sysman/config/emd.properties to get the busy ports: Successful
Loading file /opt/oracle/product/11.2.0/dbhome_1//sysman/config/emd.properties to get the busy ports: Successful
Port specified by user null is not available
Check complete. The overall result of this check is: Not executed <<<<
Check complete: Not executed <<<<
S_UNKNOWN_HOST_EXEPTION_BEFORE_CHECK: An unknown host exception encountered during the Port Pre Req Check.
Recommendation: You must free one of the ports in the required range.
Did someone encounter a similar problem before? Thanks for your help.
AmosYEP, overhere the same problem.
Can't figure out yet what the problem exactly is.
In our case I deinstalled a working 10.2.0.4 agent ( same port same config ) and tried to install 11g Agent.
It fails with the above message. We however are on AIX, and that hasn't a 'netstat -p' option to find occupied ports easily.
Because the database is question needs to be monitored constantly I now reinstalled the 10.2.0.4 agent again and works seemlessly
Still unsolved.....
FJFranken -
Cluvfy : Time zone consistency check failed
Hello All,
Env: 112.0.3 on Linux 5.8
Single node RAC
I 'am trying to add another node to my cluster.
When i run the cluvfy it shows
cluvfy stage -pre nodeadd -n a0002 -fixup -verbose
o/p trimmed
Oracle Cluster Voting Disk configuration check passed
Check: Time zone consistency
Result: Time zone consistency check failed
The `date` on both the servers shows UTC as the timezone and they sync
a0001:oracle(ps1) ~ % ssh a0002 date;date
Thu Oct 3 06:28:13 UTC 2013
Thu Oct 3 06:28:13 UTC 2013
cat /u01/app/11.2.0/grid/crs/install/s_crsconfig_a0001_env.txt
TZ=UTC
NLS_LANG=AMERICAN_AMERICA.AL32UTF8
TNS_ADMIN=
ORACLE_BASE=
Where does the script check for this?
TIA,
JohnThx Anar for stepping by..
rm -rf /tmp/cvutrace
mkdir /tmp/cvutrace
export CV_TRACELOC=/tmp/cvutrace
export SRVM_TRACE=true
export SRVM_TRACE_LEVEL=1
<STAGE_AREA>/runcluvfy.sh stage -pre crsinst -n <node1>,<node2> -verbose
i enabled tracing on cluvfy and found that on Node2's .bash_profile of oracle, i had some interactive session env settings script which required a user input (like, select 1 for ThisDB, select 2 for ThatDB). The cluvfy script internally waited for such input while logging as oracle user to node2 and eventually failed (kind of timeout). I removed that entry and it did good.
and found that on Node2's .bash_profile of oracle, i had some interactive session env settings script which required a user input (like, select 1 for ThisDB, select 2 for ThatDB). The cluvfy script internally waited for such input while logging as oracle user to node2 and eventually failed (kind of timeout). I removed that entry and it did good. -
Note messages at the time of availability check in sales order entry form
Hello Friends,
Im getting the following note messages at the time of availability check in the sales order entry form.
ATP Process resulted in no data
User defined exception in package OE_SCHEDULE_UTIL Procedure Load_Results_from_rec
User defined exception in package OE_SCHEDULE_UTIL Procedure Load_Results_from_tbl
After this when we book the order, the order line status becomes 'Booked' and does not change to 'Awaiting Shipping'
As a result of which im not able to proceed ahead with the rest of the order to cash cycle.
Can somebody please guide me in resolving this error.
We don't intend to use ATP as the client's business process is such that they maintain adequate inventory balances.
Regards
Anil WadhwaHi Anil
Are you using a RAC DB configuration? Please check if this is true, there are special setup steps that are required to be performed in case of RAC DB configuration and this issue usually occurs if such configuration is missing specifically if its happening randomly for some ATP requests.
You can find actual steps to be performed on metalink.
Thanks
Navneet Goel -
I originally put the rental on my ipad. While on vacation I decided to view it on my laptop (with a bigger screen). At the time, I had no internet access. When I attached my ipad to my laptop (wired) I clicked to view on computer and a sign poped up and said I could not connect to the itune store so it could not be transfered. It was then my movie disappeared! I'm back home and have internet connection but there is no record of my rental anywhere I can find. What can I do to retrieve my movie? THe time to view it has not expired yet.
Everything should be on your computer. Sync it back.
You should ahve been syncing contacts and calendars to your computer all along.
Did you fail to make sure that everything was on your computer before updating? -
I have connected my time capsule to motorola SG6580 modem via ethernet. I have a wireless network on the motorola and a wireless network from the time capsule. I get duplicate IPs error messages (no connection) sometimes when trying to connect devices to the wireless network. How do I fix? Sometimes devices cannot connect to the network because of conflicting IPs. I look on the Motorola and every device has a unique IP assigned but occasionally a device has taken the IP of another device. I have been writing down all the devices and the IPs they have been using. It happens more with PCs than Macs, ipads or iPhones.
If the Time Capsule is set up correctly in bridge mode, then it is the responsibility of the Motorola modem/router to provide the correct IP address assignments for all devices on the network.
Check to insure that the Time Capsule is correctly set up to operate in bridge mode as follows:
On your Mac, open AirPort Utility
Finder > Applications > Utilities > AirPort Utility
Click on the Time Capsule icon, then click Edit in the smaller window that appears
Click the Network tab at the top of the next window
Insure that the setting for Router Mode is configured to read "Off (Bridge Mode)"
Once you have confirmed that the Time Capsule is configured correctly, everything else is the responsibility of the Motorola modem/router as far as network routing and IP address assignments for devices.
If you continue to have IP address issues, then you should contact the Internet Service Provider (ISP) that provided the Motorola device to you and ask them to fix the issue. -
My iphone 4 when you upgrade the firmware on ios7.0.2 produced an error 3194
my iphone 4 when you upgrade the firmware on ios7.0.2 produced an error 3194 ... now my phone is not working ... every time an error 3194 ... I can not update ios and drop naturally I do not Pogue. hosts cleaned, cut off the antivirus ... did everything I recommend in this case ((what do I do? (
on other machines the same ...Some additional suggestions here that may help if you haven't tried them:
http://support.apple.com/kb/ts4451
Regards. -
hi..i just bought an iphone 5 yesterday 32GB..and now when i am trying to update the software..it says the following: unable to check for update/an error occurred while cheking for a software update...please help me..is it a problem in my new iphone??or it's just an temporary error in the apple software center???
Lyndsay237 wrote:
This device does not have a sim card in it. Could this be the reason or am I missing something when I am trying to update.
Yes. You can't update or restore any GSM iPhone without a valid sim card installed in the phone. The sim card need not be activated, but it must be valid & present. If you want to update, you need to get a sim card. -
The share operation Blu- ray has failed. quicktime Error: 0
the share operation Blu- ray has failed. quicktime Error: 0 anyone any idea how i overcome this ?
Are you working with native media? If you are, see if Final Cut will let you transcode a clip to Pro Res 422. Do an export test with that single clip. (Write the output to a disk image so you don't waste a disk.)
Russ -
How to fix: the share operation master file has failed quicktime error: -50
So Whenever i export my HD 1080p file in FCPX 10.0.8 i get this error "the share operation master file has failed quicktime error: -50"
Please help!!!!
It happens about 12% of the way in. My movie is only 10 minutes long.Download it. Quit FCPX. select FCPX in this tool and and click on trash. Restart FCPX and try again to export. Empty trash. It will do no harm but you have to set your settings in preferences in FCPX after that. Every application has preferences files and they can become corrupt. FCPX will build new fresh preferences after you open it.
-
I am having problems with my time capsule.
It's not backing up... if I enter the time machine, all I see is a black page, any day I look, since the day I bought it.
Was not like this before Oct 25...
Any ideas on what's going on and what should I do to make it work again?Check the USB cable first to make sure that it is operating correctly on another connection.
You may need to use a powered USB hub with the drive since the USB port on the Time Capsule is not a high powered port like you have on your Mac.
You may need to use the powered hub even if the hard drive has its own external power supply. -
Time Dimension Consistency Check Failed
Dear all,
Got a issue..
A cube which is found to be active in RSA1, but when we do the consistency check for time dimension in the transaction RSRV, we get the following error.
Unknown, profound errors with instance creation in test "CL_RSRV_CHK_TIM_DIM"
Pl help to resolve this issue.
Thanks,
RamyaHi Ramya,
Welcome to SDN...!!
Check with the Correct Error option in RSRV after selecting testing ur cube.
Best Regards,
SG -
Stop processing of billing batch in VF04 at the time of pricing check
Hi,
T-code is: VF04
We are calling external system SABRIX using RFC "RFC_CALCULATE_TAXES_DOC" to get the tax information and once if it returns any error it should not create the billing document for that particular sales document in the batch.
The problem is Billing document is creating though we have the error in Tax info from SABRIX system. All the user exits are calling before this sabrix call and we didn't find any way to stop the billing for that particular sale doc.
Can anyone throw a light that we can place the SABRIX call to any of the user exit at the time of pricing and stop the billing if any error in tax information.
It is mostly appreciated and we got stuck up with a serious issue on this!!!!!!!!!!!!!!!!!!!Hi Ajay
Thanks for the reply.
The COPA Documents Generated 2 Times through settlement.
*When document generated.*
1 After Delivery Sales order is settled
2 After Billing Sales order is settled
*What sort of value*
There i maintain the PA Stracture as same as CCS. But in the COPA report system is updating Material Cost 2 times.
*Record Type*
Record Type for documents is C in both cases
Settlement after Billing & Delivery. -
iPod Touch is showing my mail messages tripled. Incoming messages show up three times instead of as only one message.
I've tried reindexing dozens of times. It never makes a difference. I have another issue today.
I just went through a smart "unread" mailbox of 200 messages. I individually selected all but 4 emails and deleted them all. After they were deleted, I went to my regular inbox to find an old mesage and all the 196 emails I had just deleted were still in there. -
The time on my 5 has been incorrect several times.
Why is this happening?
it means that it is not a hardware issue. Other then that, Im not too sure. Sorry I can't help you any further, but Im sure others members of this forum will read your question and be able to help you. Good luck
Maybe you are looking for
-
Getting Problem in retrieving values from JTable
Hi Guys, Suppose i clicked in cell in a table to edit it and done some entry in it and without leaving that cell ( means focus is on that cell only) i clicked one button. button prints table data on console. now problem is the value in focused cell i
-
I am trying to use Panorama for the first time. I can successfully create a tab group, but Firefox does not remember it. When I view a new web page and try to use "add to group" I am redirected to the app tab I created for Google Calendar. I am using
-
T61s shutting down on their own
I've seen several complaints lately of T61 laptops deciding to shutdown on their own. The user's will be in the middle of working on them and they start to end programs and then logoff and shutdown. They seem to hang at the "saving user's" settings
-
Urgent Help:java.lang.ExceptionInInitializerError in JasperReports
the following is the java code: Map params = new HashMap(); params.put("order_type", "This is Test Print"); JRXmlDataSource ds = new JRXmlDataSource(outXML, "/Order"); InputStream is =Class.forName( "com.w3c.dom.Document").getResou
-
[SOLVED] List of configuration files of a package.
Some files belonging to a package are treated as configuration files (management of *.pacnew and *.pacsave). How can I have the list of files belonging to a package that pacman consider as configuration files? [Edited] @tomk: Thanks, didn't have in m