The touchpad scroll doesn't work in visual studio?
Hello,
As I mentioned in the title, the touchpad scroll doesn't work or affect visual studio community. The scrolling works very well with other software but it doesn't with visual studio community. This same button worked with VS 2010, VS 2012 (It stopped sometimes
but still functioning correctly most of the time), and stopped with 2013 versions. Why?
Take a look at the video to see the problem in action: http://youtu.be/Qt20pM6ZQAo
Thank you for your comments!
Scroll button on what? Are you using a mouse with a scroll wheel, or is this a laptop touch pad?
If the latter, please read here:
https://social.msdn.microsoft.com/Forums/vstudio/en-US/295553a2-80c0-4608-8b57-32c0422de3d4/visual-studio-2013-community-touchpad-scroll-doesnt-work?forum=visualstudiogeneral
Similar Messages
-
Generated WSDL doesn't work in Visual Studio
After an update of SAP we have some problems with our web service (WSDL).
First of all we created a webservice using SE80. The generated WSDL url mentioned in SE80 doesn't work in visual studio which is in our opinion weird. When we use the url from the SOAMANAGER "Open WSDL document for selected binding" in visual studio we get a little bit further but it still doesn't work. The problem seems to be the "parameter(s)" with or without "s". Does anyone know how we can generated a WSDL with only "parameters"?
ExampleWSDL:
<wsdl:message name="ZPIQ_GET_LEERWEGResponse">
<wsdl:part name="parameter" element="tns:ZPIQ_GET_LEERWEGResponse"/>
</wsdl:message>
u2212
<wsdl:message name="ZPIQ_GET_NATIO">
<wsdl:part name="parameters" element="tns:ZPIQ_GET_NATIO"/>
</wsdl:message>
SAP ECC 6.0
SAPKA70014
SAPKB70014
SAPKW70015Hi Ralph,
In order to consume SAP services in Microsoft Visual Studio .NET, you need to convert WSDL from SAP (Document style) to Microsoft (RPC style) standard. This conversion is transparent to you, if you use [ES Explorer for .NET|https://www.sdn.sap.com/irj/sdn/dotnet?rid=/library/uuid/c0319dc4-d76d-2a10-d19f-e4f4ff315bde].
Best Regards,
Rima. -
Two finger touchpad scrolling doesn't work
two finger touchpad scrolling doesn't work
Okay, I made a file called wifi.conf in /etc/modules-load.d with the only content being
ath9k
and I still have no wireless device. -
When my page is minimized to half my screen, the horizontal scrolling doesn't work.
It had been working previously, but it just stopped. If I'm on a webpage and trying to scroll sideways with two fingers, it doesn't work. Vertical scrolling works fine.
I'm on a Dell Inspiron, running Windows 7.Start Firefox in Safe Mode to check if one of the extensions (Firefox/Tools > Add-ons > Extensions) or if hardware acceleration is causing the problem (switch to the DEFAULT theme: Firefox/Tools > Add-ons > Appearance).
<b> To Enable SafeMode </b>
*You can open Firefox 4.0+ in Safe Mode by holding the '''Shift''' key when you open the Firefox desktop or Start menu shortcut.
* Or open the Help menu and click on the '''Restart with Add-ons Disabled...''' menu item while Firefox is running.
*''Once you get the pop-up, just select "'Start in Safe Mode"''
If it works in Safe Mode and in normal mode with all extensions (Tools > Add-ons > Extensions) disabled then try to find which extension is causing it by enabling one extension at a time until the problem reappears.
Close and restart Firefox after each change via "Firefox > Exit" (Windows: Firefox/File > Exit; Mac: "Firefox > Quit Firefox"; Linux: "Firefox/File > Quit")
* https://support.mozilla.org/en-US/kb/troubleshoot-firefox-issues-using-safe-mode
*https://support.mozilla.org/kb/Safe+Mode
*https://support.mozilla.org/kb/Troubleshooting+extensions+and+themes -
I had a magic mouse for my Imac and, as I got some problems, i Decide to buy a new one.
Among other problems, the vertcal scroling didn't work and I thought it was a mouse problem.
So, I'm very surprised to notice that this function doesn't work on my new mouse.
Searching in the help, I only find a reserve when using BootCamp for Windows, what I don't use.
Can anybody tell me how I can solve this problem ?
Thank you in advanceSorry, I'm not sure why Firefox 6 is no longer remembering your zoom settings, but installing the '''[https://addons.mozilla.org/en-US/firefox/addon/nosquint/ No Squint add-on]''' might help. No Squint provides options to remember zoom settings for specific web pages, or for all pages.
-
ODT 11.1.0.6.20 doesn't work under Visual Studio 2005 server explorer
I tried to connect to an Oracle Server by Server Explorer of Visual Studio 2005:
1) In Server Explorer I click with right mouse button on Data Connections and choose Add Connection...
2) I click on Change...
3) I choose Oracle Database in the left list
4) I choose Oracle Data Provider for .NET under the bottom left drop down list called Data provider (I see .NET Framework Data Provider for Oracle and .NET Framework Data Provider for OLE DB too)
5) Instead of the dialog window shown at this link [http://www.oracle.com/technology/obe/net11gobe/building.net/images/addconn04.gif] I see the dialog window shown at this other link [http://img231.imageshack.us/img231/8212/wrongvisualstudio2005se.png]
6) If I try to insert a right connection string or simply click on OK I receive this message box: "An unexpected error occurred in the .NET Framework Data Provider for Oracle. Please contact the provider vendor to resolve this problem."
If I try to redo all the operations I cannot see anymore the Oracle Data Provider for .NET under the bottom left drop down list called Data provider.
My system configuration is:
- Windows XP SP2 32Bit
- Oracle 11g ODAC 11.1.0.6.21 with Oracle Developer Tools for Visual Studio (I installed all the packages with Instant Client too, the client works I tried with SqlPlus and Sql Navigator 6.1)
- Visual Studio 2005 Version 8.0.50727.762 (SP.050727-7600)
- .NET Framework 2.0.50727
I can use .NET Framework Data Provider without any problems, but I need the new ODT 11.1.0.6.20 because I can insert stored procedures into .NET dataset visual designer and call from a TableAdapter.
I hope someone can help me.
Edited by: user5476796 on 8-mar-2009 12.30I downloaded ODAC 11.1.0.6.21 recently (two weeks ago).
I forgot to tell you that I have Visual Studio 2003 Enterprise Architect (Italian language) installed too and I installed ODAC for this version too.
In Visual Studio 2003 under Provider Tab of the Database connection I don't see any Oracle Data Provider, the only one I see is Microsoft OLE DB Provider for Oracle.
These are the whole info on my Visual Studio 2005 (English language) installation:
Microsoft Visual Studio 2005
Version 8.0.50727.762 (SP.050727-7600)
Microsoft .NET Framework
Version 2.0.50727
Installed Edition: Professional
Microsoft Visual Basic 2005 77626-009-0000007-41514
Microsoft Visual Basic 2005
Microsoft Visual C# 2005 77626-009-0000007-41514
Microsoft Visual C# 2005
Microsoft Visual C++ 2005 77626-009-0000007-41514
Microsoft Visual C++ 2005
Microsoft Visual J# 2005 77626-009-0000007-41514
Microsoft Visual J# 2005
Microsoft Visual Web Developer 2005 77626-009-0000007-41514
Microsoft Visual Web Developer 2005
Microsoft Web Application Projects 2005 77626-009-0000007-41514
Microsoft Web Application Projects 2005
Version 8.0.50727.762
Crystal Reports AAC60-G0CSA4B-V7000AY
Crystal Reports for Visual Studio 2005
Microsoft Visual Studio 2005 Professional Edition - ENU Service Pack 1 (KB926601)
This service pack is for Microsoft Visual Studio 2005 Professional Edition - ENU.
If you later install a more recent service pack, this service pack will be uninstalled automatically.
For more information, visit http://support.microsoft.com/kb/926601
Oracle Developer Tools for Visual Studio 11.1.0.6.20
Oracle Developer Tools for Visual Studio Copyright (c) 2005, 2007
SQL Server Analysis Services
Microsoft SQL Server Analysis Services Designer
Version 9.00.3042.00
SQL Server Integration Services
Microsoft SQL Server Integration Services Designer
Version 9.00.3042.00
SQL Server Reporting Services
Microsoft SQL Server Reporting Services Designers
Version 9.00.3042.00
Update for Microsoft Visual Studio 2005 Professional Edition - ENU (KB954961)
This Update is for Microsoft Visual Studio 2005 Professional Edition - ENU.
If you later install a more recent service pack, this Update will be uninstalled automatically.
For more information, visit http://support.microsoft.com/kb/954961
AnkhSVN
Please visit http://ankhsvn.tigris.org for more information
Below is the version information for the various AnkhSVN components
AnkhSVN 1.0.1.2734
OpenSSL 0.9.8a
Neon 0.25.5
ZLib 1.2.3
Berkeley DB 4.4.20
Subversion 1.4.2
Ankh 1.0.1Final
apr-iconv 0.9.7
apr-util 0.9.12
apr 0.9.12
VMDebugger
For more information about VMware Inc, see their website at
http://www.vmware.com
For customer support, call 1-800-xxx-xxxx.
Copyright (c) 2006 VMware Inc Inc.
And these ones are the info of Visual Studio 2003 Enterprise Architect ITA:
Microsoft Development Environment 2003 Version 7.1.3088
Microsoft .NET Framewrok 1.1 Version 1.1.4322
Microsoft Visual Basic .NET 69529-112-0307713-18498
Microsoft Visual C# .NET 69529-112-0307713-18498
Microsoft Visual C++ .NET 69529-112-0307713-18498
Microsoft Visual J# .NET 69529-112-0307713-18498
Crystal Reports per Visual Studio .NET AAP50GS0000GTU000ME
Microsoft Application Center Test
Oracle Developer Tools for Visual Studio .NET 11.1.0.6.20
Visual Studio Analyzer
AnkhSVN
Edited by: fradelpo on 11-mar-2009 4.16 -
Touchpad Scrolling doesn't work with Google Chrome
Hi,
I notice in Google Chrome that you cannot scroll or touch interact. Please advice.
Thanks in advance!
EchonoonGoogle Chrome is not touch friendly...But this Chome Extension takes care of it ...https://chrome.google.com/extensions/detail/ncegfehgjifmmpnjaihnjpbpddjjebme
Although I am an HP employee, I am speaking for myself and not for HP.
Make it easier for other people to find solutions, by marking my answer with 'Accept as Solution', if it solves your problem.
Click on the BLUE KUDOS button on the left to say "Thanks" -
My laptop touchpad scrolling is not working
Hi,
i am pritam,I am using hp15d017tu laptop,which came with free dos .I installed it to windows 8 pro but now the touchpad scrolling is not working.
these have not fixed my scroll at all.No other gesture are working either.The only I can do is point and click on by touchpad.
So,please help me.Hi can u help me out with the serial and product number of the unit please
-
Cant get the laptop touchpad scroll feature to work in latest Firefox version
Since installing version 4 of Firefox the touchpad scroll function has stopped working. All other programs continue to scroll correctly and the touchpad driver is uptodate (Lenovo UltraNav).
Try this: <br />
Type about:config into address bar, hit enter, Firefox would ask if you want to access the settings, say yes you know the risk.
When the list of configurations come up, type '''trackpoint''' into the filter area, you will see a '''ui.trackpoint_hack.enabled''' setting, change that from -1 to 1. Now you should be able to scroll using trackpoint and middle mouse button on the trackpad again. -
Hello!
I need help.
2 days ago the mouse worked fine. Yesterday I noticed that the mouse scroll does not work in the "Book Bazaar Reader". Now I found that the right mouse button and left mouse button does not work in some applications, but scrolling work in these applications.
In mail application clicks work in some panels, scrolling doesn't work.
In desktop mode, the mouse works perfectly.
Please help!Hi
Since at desktop mode everything fine, i suspected some application or 3rd party SW change your mouse setting
Go to run, msconfig, run as administrator, within the System Configuration dialogue box find startup tab, find KHALMNPR (if you using logitec mouse) and uncheck it
click ok and restart
or try to do clean boot to eliminate 3rd party SW issue -
Return the User to the Calling Page - doesn't work
Hello All,
I set up the "Issue tracker" tutorial to get in tuch with the apex (htmldb vers. 2.0)
All is working well but: Return the User to the Calling Page -> doesn't work. I performed all steps as descriped in the tutorial (iclusive the '.' on the &P7_PREV_PAGE ;-) ).
I use my own aplication at home and followed all the instruction steps few times but it does not work. Can you help me please?
Do I have to install something more?
In the Branch section: * 1: Go To Page &P7_PREV_PAGE. (Unconditional)
In the Item section: 90: P7_PREV_PAGE Hidden
In the Button section for cancel Button: &P7_PREV_PAGE.
Here is the description of the function in the tutorial:
Because this Create/Edit page will be called from several places, when users finish with the display they should return to the calling page. To accomplish this, you create an item and change the branch on this page. Every time this page is called, the item must be set with the number of the calling page.
To create a hidden item:
1. Under Items, click the Create icon.
2. For Select Item Type, select Hidden and click Next.
3. For Display Position and Name:
1. For Item Name, enter:
P7_PREV_PAGE
2. For Region, select Issue Identification.
3. Click Next.
4.
Click Create Item.
Next, edit the Cancel button.
5. Under Buttons, select Cancel.
6. Scroll down to Optional URL Redirect.
7. In Page, enter:
&P7_PREV_PAGE.
Note the period at the end.
8. Click Apply Changes.
Next, edit the branch.
9. Under Action, enter the following in Page:
&P7_PREV_PAGE.
10. Click Apply Changes.
All steps are done but I still got the message: Error ERR-1016 Application "106" Page "0" not found (requested language="de")
OK
I move the mousepointer over the cancel button: javascript:redirect('f?p=106:0:5265993428922076876::NO:::')
Thank you for helping me!
best regards ThorstenAll,
I haven't looked at that tutorial for quite a while but just gave it a quick look.
Further down in the tutorial, it directs you to set the value of P7_PREV_PAGE, under Add Functionality to Support Adding Multiple Issues Sequentially - have you done that? There is also a mention that there is more branching to be done - "The branch you just created is looking for a value in P7_PREV_PAGE. Since the page was not called from another page, the value has not been set. You need to fix that next." It goes on to have you define that value from other places.
Can you describe what you are doing when you get the error? There could be something missing from the tutorial. A way around it would be to create a default value for P7_PREV_PAGE so that if it is not set, a default page will be used.
-- Sharon -
Horizontal scrolling doesn't work with ItemsStackPanel in ListView(GridView)
Hi,
In Win 8.1 App Store Project I have a ListView with fixed width and listen for ContainerContentChanging event because of performance issues.
When ListView width is less than content width, horizontal scrolling doesn't work. If we change ItemsStackPanel to VirtualizingStackPanel, horizontal scrolling works fine. But ContainerContentChanging doesn't work with VirtualizingStackPanel.
Is it possible to make horizontal scrolling work with ItemsStackPanel?
Here simple example to reproduce this problem:
<Page
x:Class="App8.MainPage"
xmlns="http://schemas.microsoft.com/winfx/2006/xaml/presentation"
xmlns:x="http://schemas.microsoft.com/winfx/2006/xaml"
xmlns:local="using:App8"
xmlns:d="http://schemas.microsoft.com/expression/blend/2008"
xmlns:mc="http://schemas.openxmlformats.org/markup-compatibility/2006"
mc:Ignorable="d">
<Page.Resources>
<DataTemplate x:Key="ContinuousViewItemTemplate">
<Border Width="800"
Background="Green"
Margin="10"
Padding="5">
<Border x:Name="root" Height="800" Background="{Binding}"/>
</Border>
</DataTemplate>
<Style x:Key="ListViewStyle1" TargetType="ListView">
<Setter Property="ScrollViewer.HorizontalScrollBarVisibility" Value="Visible"/>
<Setter Property="ScrollViewer.HorizontalScrollMode" Value="Enabled"/>
<Setter Property="ItemTemplate" Value="{StaticResource ContinuousViewItemTemplate}"/>
</Style>
</Page.Resources>
<Grid>
<Grid.ColumnDefinitions>
<ColumnDefinition Width="100"/>
<ColumnDefinition Width="500"/>
<ColumnDefinition/>
<ColumnDefinition Width="500"/>
<ColumnDefinition Width="100"/>
</Grid.ColumnDefinitions>
<ListView Style="{StaticResource ListViewStyle1}" Grid.Column="1">
<SolidColorBrush Color="Red"/>
<SolidColorBrush Color="Cyan"/>
</ListView>
<ListView Style="{StaticResource ListViewStyle1}" Grid.Column="3">
<ListView.ItemsPanel>
<ItemsPanelTemplate>
<VirtualizingStackPanel/>
</ItemsPanelTemplate>
</ListView.ItemsPanel>
<SolidColorBrush Color="Red"/>
<SolidColorBrush Color="Cyan"/>
</ListView>
</Grid>
</Page>Hi Mikhail Maksyuta,
Welcome back!
Yes, you are right! I have reproduced it on VS 2013 professional.
I will report it as bug, Thanks for your valuable suggestions!
If you have any other questions about this, please feel free let me know!
Thanks again!
Regards!
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey. -
Horizontal scroll doesn't work.
I have recently updated to the Firefox 5. After update my A4Tech X6 mouse horizontal scroll doesn't work in Firefox, but at the same time it works fine in other applications. I had no such problems with scrolling in Firefox 3.6.*. Please help me.
sticksen,
I'm glad that it is user specific. Now I only know of one file you are going to need to remove to fix this problem, but keep in mind some basic setting in other programs are going to be rest by the removal of this file, you will just have to change them back when you run across them. Example in My Mail program I had to turn of the show thread feature again.
Ok here is what you have to due in order to delete the file. First off close all running programs including (System Preferences) but excluding (Safari). you will be perfectly fine having it running. The file is a hidden file so you need to show the hidden files on your computer to do so open (Terminal) and type in exactly as follows:
defaults write com.apple.finder AppleShowAllFiles TRUE
Hit return and then follow it by typing:
killall Finder
Hit return finder will reset and all you hidden files with show, after which Open finder and go into (Your User Name)/(Library)/(Preferences) and find the file named (.GlobalPreferenes.plist) and Delete it. Don't do anything after you delete this file just log out. Now log back in open Terminal and type exactly as follows:
defaults write com.apple.finder AppleShowAllFiles FALSE
killall Finder
Now test to see if you can scroll horizontally. And just for your comfort I did this myself after disabling the Horizontal scroll and it toggles it back on. (I have a white macbook not the new unibody macbook).
Do note that Mac keeps all settings files in (.plist)s and by removing them in your user folder will not harm your computer or the stability of your mac. These files are there just to hold settings files so that your experience can be the most pleasing for you.
Hope that helps. -
Scrolling Header works in Visual Studio but not on Report Server 2008
2008 R2 Reporting Services. My scrolling header works in Visual Studio but not when deployed to the Report Server and viewed in IE 9. I have read most every post on this issue and can't find a solution. I have the fixed data properties
set correctly. Any suggestions?
Help appreciated!
LindaHi Linda,
As a suggestion, I would try to delete the deployed version and instead of deploying ther RDL file, i would try to upload the file and test it.
If the issue exisit, then I would download the exisiting version from the reportserver and compare the xml versions of the two reports and check if the propoerty is getting over written while deploying.
HTH,
Ram
Please vote as helpful or mark as answer, if it helps -
My ipod nano 4th gen. scroll doesn't work at all. how do i fix it? do i have to send it in? and how much would it cost?
So it connected wirelessly at the Apple store where you took it for service? What kind of wireless router are you using and have you updated the firmware for it?
Maybe you are looking for
-
Whenever I try to download or update an app, whether the app is free or not, a message saying that my Billing Information is incorrect pops up. I go to it and the credit card information is under a nonworking credit card. I do not have the option "N
-
I bought my daughter an iPod touch for Christmas. I orginally set up her iPod with my Apple ID but I realized that she needed her own apple ID in order to use iMessage and Facetime with me. So if I create an Apple ID for her, can I link it to my em
-
Microphone not working correctly / Working out of nowhere / Driver issues
Yeah I have the T61p-A24. The microphone isn't working for me. I am trying to use skype and talk to my family. I tried a few different drivers and rolling back a few times. All of a sudden yesterday I could hear myself through my speakers. I didn't h
-
Apple Remote Desktop, 2010 Mac Pro, and six displays
Under 10.8, we were able to operate a 2010 Mac Pro (MacPro5,1) with 2 x HD5770 video cards and 6 x LED Cinema Displays (the mini DisplayPort models, two of them via IUSB-powered Atlona DVI Dual-Link-to-mDP adapters, via Apple Remote Desktop. Under 10
-
With MacBook pro and airport extreme router, how can I print wirelessly to an old HP wireless photosmart all in one printer? What is needed or what process?