TS4532 My iPhone V will not connect to a Microsoft Exchange server. It says that the User Name or Password are incorrect even though they're not and I can log on directly to Exchange using the web browser. The connection worked until IOS 6.1.2 was Install

My iPhone V will not connect to a Microsoft Exchange server. It says that the User Name or Password are incorrect even though they're not and I can log on directly to Exchange with the same parameters using the web browser.
I bought the phone when it came out last October. The connection did not work at first, then started without warning in December. It worked perfectly for 2 months then stopped again when IOS 6.1.2 was Installed.
Help please!

I have forwarded these questions about the version of Exchange server that is being used and whether Microsoft host the mai themselves to the IT Dept but I will not get a reply from them until tomorrow.
In the meantime I have also tried:
Deleting and re-creating the account AGAIN!
And re-setting the phone (recommended as a solution to a similar problem with an iPad in another forum.
But please remember that:
The phone would not connect for 2 months after I bought it
Then started working unexpectedly in December
Then stopped working again when IOS 6.1.2. was installed
Also why am I the only person affected by this when colleagues with iPhone 3s and 4s who use the same mail system are not (I am still trying to find one with an iPhone V to see if their's works).
Like I said I think that there must be a fault, either with my own phone or with iPhone Vs in general.

Similar Messages

  • I have a first generation iPad and macbook air and iPad is saying that my username or password are incorrect even though they are working on the Air and my iPhone.

    I have a first generation iPad and it is saying it can't get mail as the user name or password are incorrect even though the same details are working perfectly on my Macbook Air and iPhone.

    Hi Go to settings On iPad Email Accounts Delete Email Account then Re Add Account Do this for each Account you are having problems with. Cheers Brian

  • Keep getting message on iphone 6  that the user name or password in incorrect for aol

    I keep getting the message for AOL mail on iphone 6+ that the user name or password is incorrect even though they are correct.  This occurred suddenly for no reason.

    skater1000 wrote:
    I keep getting the message for AOL mail on iphone 6+ that the user name or password is incorrect even though they are correct.  This occurred suddenly for no reason.
    Try deleting and reinstalling the email account.
    Try contacting aol

  • I can not sign in to both face time and messages, each time I try I receive a msg stating that my user name or password r incorrect, i try with others friends pass word and we have the same msg, I bought my iPad from USA, and I visit the agent at Egypt,

    Each time I try to sign in to face time I receive a msg stating that the user name or password are incorrect, I visit the local agent and the told me we can not do help you , they think there's an problem with the iPad as I bought it from USA

    Using FaceTime http://support.apple.com/kb/ht4319
    Troubleshooting FaceTime http://support.apple.com/kb/TS3367
    The Complete Guide to FaceTime + iMessage: Setup, Use, and Troubleshooting
    http://tinyurl.com/a7odey8
    Troubleshooting FaceTime and iMessage activation
    http://support.apple.com/kb/TS4268
    Using FaceTime and iMessage behind a firewall
    http://support.apple.com/kb/HT4245
    iOS: About Messages
    http://support.apple.com/kb/HT3529
    Set up iMessage
    http://www.apple.com/ca/ios/messages/
    Troubleshooting Messages
    http://support.apple.com/kb/TS2755
    Setting Up Multiple iOS Devices for iMessage and Facetime
    http://macmost.com/setting-up-multiple-ios-devices-for-messages-and-facetime.htm l
    FaceTime and iMessage not accepting Apple ID password
    http://www.ilounge.com/index.php/articles/comments/facetime-and-imessage-not-acc epting-apple-id-password/
    Unable to use FaceTime and iMessage with my apple ID
    https://discussions.apple.com/thread/4649373?tstart=90
    For non-Apple devices, check out the TextFree app https://itunes.apple.com/us/app/text-free-textfree-sms-real/id399355755?mt=8
     Cheers, Tom

  • The report server has encountered a configuration error. Logon failed for the unattended execution account. (rsServerConfigurationError) Log on failed. Ensure the user name and password are correct. (rsLogonFailed) The user name or password is incorrect

    I am able to run the report fine in BIDS in the preview window, and it deployes fine.  When it goes to view the report in the browser, I get the following error.  There is no domain, I am using a standalone computer with SQL Server and SSRS on
    this one machine.
    Can anyone point to where I might configure the permission it is looking for?  thanks!  Steven
    The report server has encountered a configuration error. Logon failed for the unattended execution account. (rsServerConfigurationError)
    Log on failed. Ensure the user name and password are correct. (rsLogonFailed)
    The user name or password is incorrect
    Steven DeSalvo

    Hi StevenDE2012,
    Based on the error message "The report server has encountered a configuration error. Logon failed for the unattended execution account. (rsServerConfigurationError)", it seems that the Unattended Execution Account settings in Reporting Services
    Configuration is not correct.
    Reporting Services provides a special account that is used for unattended report processing and for sending connection requests across the network. Unattended report processing refers to any report execution process that is triggered by an event rather than
    a user request. The report server uses the unattended report processing account to log on to the computer that hosts the external data source. This account is necessary because the credentials of the Report Server service account are never used to connect
    to other computers. To configure the account, please refer to the following steps:
    Start the Reporting Services Configuration tool and connect to the report server instance you want to configure.
    On the Execution Account page, select Specify an execution account.
    Type the account and password, retype the password, and then click Apply.
    In addition, please verify you have access to the Report Server database by following steps:
    Go to SQL Server Reporting Services Configuration Manager, make sure the configuration is correct.
    Go to Database, Verify that you can connect to the database.
    Make sure you are granted public and RSExecRole roles.
    Reference:
    Configure the Unattended Execution Account
    Configure a Report Server Database Connection
    If the problem is unresolved, i would appreciate it if you could give us detailed error log, it will help us move more quickly toward a solution.
    Thanks,
    Wendy Fu

  • "The user name or password is incorrect" on email at Lunarpages

    I am trying to connect to my email account hosted at Lunarpages but I get the meassage "The user name or password is incorrect". The account works fine connectiing through Mail on my PB Pro2 and I am using the same settings. Any Ideas?

    > I changed something at users account
    And how to help? Who knows what you have done there.
    I can tell you that this is really bad situation now. Without right password you will not be able to start clean OS installation using HDD recovery procedure.

  • Sat T135D: "The user name or password is incorrect" error message at logon

    Hello!
    I bought a Toshiba T 135D laptop, and after a few days I worked with it, I changed something at users account and now it gives me this error "the user name or password is incorrect" at logon. I mention that I didn't introduced any password before.
    Can you help me?

    > I changed something at users account
    And how to help? Who knows what you have done there.
    I can tell you that this is really bad situation now. Without right password you will not be able to start clean OS installation using HDD recovery procedure.

  • SCOM Linux discovery failed with "The user name or password is incorrect" error

    Hi every one .
    In our test environment when I want to discover a new linux computer system , discovery process fails with this error message :
    Unexpected DiscoveryResult.ErrorData type.  Please file bug report.
    ErrorData: Microsoft.SystemCenter.CrossPlatform.ClientLibrary.Common.SDKAbstraction.TaskInvocationException
    Task invocation failed with error code 1326. Error message was: The user name or password is incorrect.
       at System.Activities.WorkflowApplication.Invoke(Activity activity, IDictionary`2 inputs, WorkflowInstanceExtensionManager extensions, TimeSpan timeout)
       at System.Activities.WorkflowInvoker.Invoke(Activity workflow, IDictionary`2 inputs, TimeSpan timeout, WorkflowInstanceExtensionManager extensions)
       at Microsoft.SystemCenter.CrossPlatform.ClientActions.DefaultDiscovery.InvokeWorkflow(IManagedObject managementActionPoint, DiscoveryTargetEndpoint criteria, IInstallableAgents installableAgents)
    But I m sure that this username and password is correct and I can logon to this computer with this credential.
    how do I find root cause of this issue ?

    I have been enabled logging before doscovery process .
    in temp directory :
    0: 02/10/15 20:03:22 : Enter SCXNameResolverProbe constructor
    0: 02/10/15 20:03:22 : Leave SCXNameResolverProbe constructor
    1: 02/10/15 20:03:22 : Enter SCXNameResolverProbe::DoInit
    1: 02/10/15 20:03:22 : XML_INIT_CALL
    1: 02/10/15 20:03:22 : Check WSAStartup
    1: 02/10/15 20:03:22 : Exit SCXNameResolverProbe::DoInit
    2: 02/10/15 20:03:22 : Enter SCXNameResolverProbe::DoProcess()
    2: 02/10/15 20:03:22 : SCXNameResolverProbe::DoProcess passed initial arguments checking
    2: 02/10/15 20:03:22 : SCXNameResolverProbe::DoProcess input: 192.168.7.62
    2: 02/10/15 20:03:22 : SCXNameResolverProbe::DoProcess - Input is an IP-address
    3: 02/10/15 20:03:22 : Enter SCXNameResolverProbe::GetName(): 192.168.7.62
    3: 02/10/15 20:03:22 : Resolve IPv4 address to host name
    3: 02/10/15 20:03:22 : Leave SCXNameResolverProbe::GetName(): SUSE11
    2: 02/10/15 20:03:22 : SCXNameResolverProbe::DoProcess returns name: SUSE11
    2: 02/10/15 20:03:22 : SCXNameResolverProbe::DoProcess returns ip: 192.168.7.62
    2: 02/10/15 20:03:22 : SCXNameResolverProbe::DoProcess returns errorcode: 0
    2: 02/10/15 20:03:22 : SCXNameResolverProbe::DoProcess returns errortext: 
    2: 02/10/15 20:03:22 : SCXNameResolverProbe::DoProcess returns xml: <NetworkName>SUSE11</NetworkName><IPAddress>192.168.7.62</IPAddress><StatusCode>0</StatusCode><StatusMessage></StatusMessage>
    2: 02/10/15 20:03:22 :  Enter initDataHolder
    2: 02/10/15 20:03:22 : Enter initDataType
    2: 02/10/15 20:03:22 : initDataType initializing output datatype
    2: 02/10/15 20:03:22 : Leave initDataType
    2: 02/10/15 20:03:22 : Leave initDataHolder
    2: 02/10/15 20:03:22 : Leave SCXNameResolverProbe::DoProcess
    4: 02/10/15 20:03:22 : Enter SCXNameResolverProbe destructor
    4: 02/10/15 20:03:22 : SCXNameResolverProbe destructor - FreeLibrary failed: 0
    4: 02/10/15 20:03:22 : Leave SCXNameResolverProbe destructor
    with debug viewer I have this message after discovery :
    [7448] A management object with display name SUSE11 could not be found.

  • Keep showing "the user name or password is incorrect after changing pwd

    after i changed my gmail password, i change it correspondingly on my ipad.
    however it keeps showing "the user name or password is incorrect.
    i even deleted the account and create again but not work.
    it worked perfectly good before i changed my gmail password.
    please help.

    additional information:
    my another gmail account on ipad mail app work fine
    checked google imap setting and caps log.

  • HT203261 When i open my email it comes up with The user name or password is incorrect. This has only come up in the last day. As far as I am aware the user name and password is correct. Can you please advise.

    My email has been working fin. however In the last day or so when  i open my email or send an email it comes up with,
    The user name or password is incorrect. As far as I am aware the user name and password is correct. Can you please advise.
    Declan Jackson

    Try going into Settings > Mail, Contacts, Calendars and select that email account and try re-typing in the account's username and password

  • When I try to look at my mail, it says the user name or password is incorrect

    When I try to look at my mail, it says the user name or password is incorrect. How can I fix this?

    Reset network settings. ( Settings > General > Reset > Reset network settings )
    Retest
    Remove account
    Re-add.

  • I get an intermittent " Cannot Get Mail. The user name or Password is incorrect" I haven,t touch any settings. Any ideas?

    I get an intermittent " Cannot Get Mail. The user name or Password is incorrect" I haven,t touch any settings. Any ideas?

    That usually means that the mail server is busy and rejects the Mail App's request for a mail update.

  • "The user name or password is incorrect" error on FaceTime

    I reset my new iPad but I can no longer access FaceTime. I get the error : the user name or password for (my apple ID) was incorrect. Try again
    Anyone out there can help?

    I am also experincing the same problem when trying to log in from my new iPad. I didn't have problems before updating to iOS6.
    I tried changing DNS to 8.8.8.8. , hard restart, restart, closed all apps, via settings, and I even created a new apple ID, but still can't log in.
    My friends don't have any problems.
    Would appreciate any help.
    Thanks

  • HT1222 Can not get mail . The user name or passwords is incorrect

    Can not get e-mail . It states that the user name is incorrect and pass-word is incorrect

    Did you check your settings and make sure that the information is correct?

  • Browse cube - Change User: The following system error occurred: The user name or password is incorrect.

    Environment: Windows Server 2012, SSAS 2012 (11.0.5058)
    I have two identical SSAS Servers in the same domain. The SSAS project on machine B is a copy from machine A.
    On machine A I can browse the cube using a different user using the Change User button. But this doesn't work on machine B. Any suggestions where to look?
    Please mark the post as answered if it answers your question | My SSIS Blog:
    http://microsoft-ssis.blogspot.com |
    Twitter

    Hi SSISJoost,
    According to your description, you can browse the SQL Server Analysis Services cube in MachineA using the user IZP\bis2, the problem is that you cannot browse the same cube on MachineB using the same user, the error message is that "the username
    or password is incorrect", right?
    In a SSAS project, the Browser button is used to browse the deployed cube. So in your scenario, the issue can be caused by that you have only copy the project from machineA to machineB without deploy it. To avoid this issue, you can deploy this project to
    ServerB. Or create an Analysis Services Project based on an existing cube on ServerA. Please refer to the link below to see the details.
    https://technet.microsoft.com/en-us/library/ms365361%28v=sql.105%29.aspx?f=255&MSPPError=-2147217396
    Regards,
    Charlie Liao
    If you have any feedback on our support, please click
    here.
    Charlie Liao
    TechNet Community Support

Maybe you are looking for

  • Extract PSA Data to a Flat File

    Hello, I would like to download PSA data into a flat file, so I can load it into SQL Server and run SQL statements on it for analysis purposes.  I have tried creating a PSA export datasource; however, I can find way to cleanly get the data into a fla

  • Make a field required on record creation, read only after that

    Hello, Does anyone know of a way to make a pick-list field required on record creation, but read-only after that? The other twist to this is that we need to allow this field to also be read-write for all the integration edits, since this field's valu

  • I want to create ipple id but there is no option in my phone of none in pay

    i want to create ipple id but there is no option in my phone of none in pay

  • Presentation only on one Monitor?

    I am preparing a Presentation for 2 Beamers (Left & Right). But also the new Keynote Provides only one Monitor Output 8(. I cant present my Stage 1600x600 on my two Monitor Outputs (Left 800x600, Right 800x600 ). I have tryed the Matrox TripleHead2Go

  • Calendar events disappear

    I've just got back from my physio who is ready to dump Calendar on iCloud because it has suddenly become unreliable.  She is normally in week view and increasingly sees blanks, books people in - only to find that the next time she looks, there are tw