The way to fill data in test

Hey friends
Can anyone say me ,what is best way to fill data in test from Development .I want to take data from production to test every day .Every day many transaction occurs here and i want to modify all that happened to production.
Thanks in Advance
Tinku

The problem, I'm assuming, with that is that there is presumably data in the dev/test environments that is not in prod that needs to be in dev/test. There will almost certainly be new and modified database objects and new or modified procedures in dev/test that ought not be overwritten.
You could work around that issue by creating every table in dev/test as an updatable materialized view. The problem there is that will set up a situation where production performance is potentially affected by issues on dev/test and that the objects you're working with in dev/test aren't the same as they are in prod (MVs rather than tables), which generally goes against the point of dev/test.
That leaves you creating a staging schema of materialized views and creating a custom ETL routine to extract data from those MVs (or from prod directly, but that puts a bigger burden on prod) and add it to your tables (noting that the ETL routines need to change whenever changes are made to the structure of your database and that calculated fields sometimes need to be recalcualated with the updated logic in dev/test). 99% of the time someone thinks they want what you're asking for, they realize that they don't want daily refreshes that badly when they start looking into the complexity of implementing it.
The vast majority of applications have no problem running with data that is a few months out of date, so you can recover prod to test after, say, a regularly scheduled build.
Justin
Distributed Database Consulting, Inc.
http://www.ddbcinc.com/askDDBC

Similar Messages

What are the ways to download data from ods?

Hi all,
what are the ways to download data from ods?
1. se11/se12
2. listcube
3. infospokes.
Apart from the above 3 is there any other way to download data from my ods.
I need to download around 90 fields from my ods to a flat file. But listcube doesnt allow me to select all the fields. So i used se11 to download the data from my ods. bUt still se12 doesnt allow me to download all the 90 fields it downloads only 40 fields.
Can anyone suggest me how to select all the 90 fields and download it to an excel sheet.
thanxs
haritha

Hi Haritha,
Go to Tcode SE16, give your ODS active Table name and give width of output list as 1023.
Now run transaction to see your data and then click Settings --> User parameters and Select ALV Grid Display.
Now you should see and Excel Icon on top, click on it then select Table , then
Microsoft Excel and it will open your data with all columns you want.
I just tried for 213 columns
Hope this helps.
Thanks
CK

The way to synchronize data between different locations

Hi all,
Pls to guide for me the way to synchronize data between difference locations with SQL server 2000, SBO 2005A. Thanks !!!

Hi Andy,
As Ibai already replied in the SAP Business One Forum there are several options.
If you want to use "SAP Business One Integration..." you may have to do quite some work to connect two SAP Business One systems ASFAIK.
This hasn't been in focus for the first release of this integration platform (which is currently in Ramp-Up), but Integration to SAP R/3 / mySAP...
Maybe some colleague - or partner developer who eventually already worked on that knows better?
Regards,
Frank

The ways to return data from a stored procedure.

Hi, I know there are three ways to pass out a value from a Microsoft SQL stored procedure, but I have no clear idea what Oracle SP can do, I know Oracle doesn't support multi-recordset(v8), can not return a recordset by a inner select query, but I do know there is a cursor object, which doesn't like its counterpart in Microsoft SQL server, is a choice under most situation. Here I wonder anyone who is good at Oracle can give a list of all ways to return data from a SP, including example is more better, thanks.

Here is a way to get return a record from a function and a procedure. You need to be familiar with Oracle packages as well as stored procedures and functions:
CREATE OR REPLACE PACKAGE EmpPkg AS
cursor cEmp(pEmpno in number) is
select empno, ename, job, hiredate, sal
from emp
where empno = pEmpno;
FUNCTION GetEmployee(pnEmpNo in number) RETURN cEmp%rowtype;
PROCEDURE GetEmployee(pnEmpNo in number, prEmp out cEmp%rowtype);
END;
CREATE OR REPLACE PACKAGE BODY EmpPkg AS
FUNCTION GetEmployee(pnEmpNo in number) RETURN cEmp%rowtype IS
rEmp cEmp%rowtype;
BEGIN
open cEmp(pnEmpNo);
fetch cEmp into rEmp;
close cEmp;
return rEmp;
END;
PROCEDURE GetEmployee(pnEmpNo in number, prEmp out cEmp%rowtype) IS
BEGIN
open cEmp(pnEmpNo);
fetch cEmp into prEmp;
close cEmp;
END;
END;
Here's how you use the package:
DECLARE
rEmp EmpPkg.cEmp%rowtype;
BEGIN
rEmp := EmpPkg.GetEmployee(7782);
dbms_output.put_line(rEmp.ename);
EmpPkg.GetEmployee(7902, rEmp);
dbms_output.put_line(rEmp.ename);
END;
Note that you can return any Oracle data type from a function. Likewise, you can specify any Oracle data type as an out parameter in a procedure. Also, you can make a parameter both an in and an out datatype like this:
PROCEDURE GetEmployee(pnEmpNo in out number);
I hope this puts you in the right direction.
null

I am not able to save the pdf with filled data or related to reader extension

Hi,
I have designed a pdf with some text field controls. But i am not able to save the document when i fill some data into the pdf.
or whenever i save data it says that the pdf will be saved blank.
I know that this is the reader extension issue. How to i add this reader extension feature into it.
I know that reader extension can be
1. cached
2. A document can be made reader extended using adobe live cycle process.
3. also it can be embedded while designing the pdf.
Can any body let me know how do i incorporate reader extension feature while designing and at runtime too.
I know we have taken reader extension license but dont know how to use this reader extension feature.
Regards
Sunil

Hi Sunil,
You indicate that you have a Reader Extensions license, did you also purchase Adobe LiveCycle Reader Extensions ES2? You would apply the license to your form using this server product.
You can also apply reader rights using Acrobat Standard v9 (or Acrobat Professional v8), but this has license restrictions - see EULA. Also the rights that are enabled using this route will not be as many when compared to LC Reader Extensions ES2.
I have a summary here:
http://assurehsc.ie/blog/index.php/2010/05/using-livecycle-forms-in-acrobat-and-reader/
Also have a look at the Adobe page:
http://www.adobe.com/products/livecycle/readerextensions/
Maybe talk to the Adobe sales in your region.
Good luck,
Niall

What are the ways in data transfer

Hi Experts,
What are the ways to transfer data from SAP R/3 to SAP BW and SAP BW to SAP APO DP?
Can anyone help me please.
Regards
Suvi

Hello,
I can only help on part of your questions, since I'm not familar with R/3 data uploading ...
If you want to download data from BW infocube to APO DP:
1)For CVCs, you can just use /sapapo/mc62, input POS name, click 'Create Characteristic Combinations'.
   Then select an option except 'Create manually'.
   In the 'Data Source' area, select load data from 'InfoProvider'.
   Then you can load CVCs from infocube to APO system for generation.
2)For transactional data (key figure values), you can use /sapapo/tscube.
   Just fill in the source cube's name, version, and tagert planning area's name, version.
   Key figure assignment and characteristic assignment are also necessary.
   Specify other options as to your requirement, and you can download transactional data from BW to DP.
Best Regards,
Ada

Network based and a-gps, data use tests

i was trying to find this kind of info, but only found others asking.
i hope this is useful info for others, especially while roaming.
skip to the bottom for conclusion,
this is the process i took:
i called nokia tech support,
their phone support his horrible,
the people on the phone don't actually know anything, and have to look up everything you ask them.
they were the worst.
i emailed nokia tech support.
my message was:
"i would like to know the difference between assisted gps positioning, and network based positioning. these are 2 of the 4 options on my nokia e66 for positioning methods. i would like to know if network based positioning uses internet data from my service provider to obtain my gps position. i am especially concerned with this function while i'm roaming internationally, as i do not want to be charged for roaming data use."
in about half hour they responded w/ an answer, and then 45 min after that someone else responded w/ an answer.
the first response, minus the hello's etc. was:
"In response to your email, Assisted GPS and Network Based positioning methods generate costs related to data traffic so you will be charged for data use. Only "normal" GPS and Bluetooth GPS do not generate additional costs related to data traffic.
Normal GPS is quite slow and does not work indoors. Therefore, it is recommended to enable at least A-GPS to get a faster position outdoors.
Network based and Wi-Fi positioning also allow you to update your position inside buildings, but they cannot be used for navigation."
the 2nd response was:
"In response to your inquiry, the difference between Assisted GPS positioning (A-GPS) and Network based positioning is that, A-GPS uses satellites while Network based positioning is based on information of your cellular network environment. It allows you to update your position inside buildings, but they cannot be used for navigation. Both positioning methods generate costs related to data traffic (unless you have configured the device to use Wi-Fi connection to make the internet connection). The cost may vary while you are on roaming. Kindly contact the service provider for information about data transmission costs."
i can also respond w/ more questions, but instead did some tests, starting with sitting home, indoors, and eventualy moving to a window w/ lots of sky.
test 1:
i enabled:
integrated gps
network based
assisted gps
opened maps,
set maps to be offline,
set default internet access point to my home wlan network,
closed maps,
cleared all counters and the log on the phone's communication log.
opened maps
there is a pink circle around the area i may be in,
the icon that would show gps satellite strength, changes to show the cell phone antenna icon.
but the packet data counter is sending/receiving a total of around 3-8kb immediately, and over the course of time, it keeps adding up, every 1-2 minutes, and it is shown as packet data to/from the access point "at&t internet"
over the course of ten minutes, it's been about 43kb.
and i can tell on the phone's home screen that the packet data connection becomes active when it does.
the maps kb indicator still says 0.0kb, with a line through the double arrow packet data symbol.
test 2:
now i exited maps,
cleared the counters and logs
i turned off a-gps.
enabled only integrated gps and network based.
i open maps,
the same thing is happening as with the assisted gps on, except i connected to my home wlan once, in the middle of connecting to at&t internet 10 or so times.
everything else is happening the same.
test 3:
i exited maps,
cleared the counters and logs.
enabled only integrated gps.
i open maps, and there is no evidence of packet data connection, or wlan connection.
nothing is showing up in the logs or packet counters, and there is no pink circle around where i may be.
if i set maps to go online, w/ my wlan as the access point, or at&t internet, their respective icons show up on maps, as well as the phone's home screen.
the phone's log show respective connections are made but w/ 0.0kb, and the phone's packet counter, as well as the maps kb usage, say 0.0kb.
test 4:
set maps to offline, w/ my wlan as access point.
exited maps,
turned phone off for a bit to test gps from cold start.
turned on phone,
cleared counters/logs,
enabled only assisted gps and integrated gps.
open maps, there's no pink circle around where i may be, just the red dot of where it thought i last was.
there's about 4-5kb of data transfer,
then i bring the phone to the window where there's a lot of clear sky, and my location is found pretty fast.
i know that w/o assisted gps, w/ only integrated gps, it takes a while to get the gps signals.
i went back and forth to/from the window, and there was packet data use again only once more, not continuously like w/ network based positioning.
so to conclude my tests,
setting the maps to be offline, still uses a-gps and network based positioning.
network based uses a more data, continuously,
which is the opposite of what i thought, i thought a-gps would use more, so i was using network based on and a-gps off while in canada. whoops.
using assisted gps uses about 5-10kb, which, when roaming, according to at&t, they charge 1.95cents/kb.
might be worthwhile for getting a quick gps signal, nothing worse than waiting forever for it to connect.
the only way to be completely clear of data use is disable network based and assisted gps, or set the phone to offline mode.

A-GPS: This uses information from cell network to get a rough idea of where you are. It then uses this information to figure out which satellites to look for. Result is a faster satellite lock. So A-GPS uses a few kB of data to get an initial position, but navigation is done using GPS satellites, which does not require ANY data connection.
Network based: This uses information from the cell network to plot the current position when GPS satellite signal is not available, ie indoors, in a tunnel, etc. Position info derived from the cell network is not as accurate as that from GPS satellites, but serves as a stopgap until GPS signal can be re-acquired. Network based positioning used your data connection EACH TIME the satellite lock is lost. So the amount of data used is dependent on the quality of access you have to the GPS satellites. If you don't lose the connection to the GPS satellites, then you won't use any data.
The ‘offline’ option within the Nokia Maps app only refers to street, POI, etc searches, NOT to A-GPS, Network based positioning or to connecting with the GPS satellites.
If you want to navigate without using ANY data connection, set A-GPS off AND set Network based positioning off AND set the Internet option in Nokia Maps to Offline. Do this and you will not use any of your data connection allowance when navigating. There is no need to put the phone into flight mode.
If I've helped you, you can thank me by clicking the green 'kudos' star on my post. Cheers.

[svn] 4607: Change the way we handle setItemAt in DataGroup.. we now do it synchronously again.

Revision: 4607
Author: [email protected]
Date: 2009-01-21 10:45:20 -0800 (Wed, 21 Jan 2009)
Log Message:
Change the way we handle setItemAt in DataGroup..we now do it synchronously again. However, this has the consequence that, even temporarily, you are not allowed to have the save visual element listed twice in the data collection.
Get parity with Halo behavior and Flash behavior by allowing addElement()/addElementAt() to be called on an element already in the list. When this happens just shift the indices around.
Small ASDoc fix in GroupBase. Also, change the way we handle data being set int he default complex item renderer...this way we're not using binding, and the code is also easier to understand.
QE Notes: Write tests for addElement/addElementAt on items already in the group.
Doc Notes: None
Bugs: SDK-17909, SDK-18189
Reviewer: Hans
tests: checkintests, mustella DataGroup, List, Group, FxContainer, FxDataContainer
Ticket Links:
http://bugs.adobe.com/jira/browse/SDK-17909
http://bugs.adobe.com/jira/browse/SDK-18189
Modified Paths:
flex/sdk/trunk/frameworks/projects/flex4/src/mx/components/DataGroup.as
flex/sdk/trunk/frameworks/projects/flex4/src/mx/components/Group.as
flex/sdk/trunk/frameworks/projects/flex4/src/mx/components/baseClasses/GroupBase.as
flex/sdk/trunk/frameworks/projects/flex4/src/mx/skins/spark/FxDefaultComplexItemRenderer. mxml
flex/sdk/trunk/frameworks/projects/wireframe/src/wireframe/FxDefaultComplexItemRenderer.m xml

Hi blabla12345,
(untested and without warranty)
replace this line:
const sSaveCUBE = "CUBE";
with this:
const sSaveCUBE = "cube";
Have fun

Different ways to Transfer data from one database to another database

Hi all,
What are the ways to transfer data from one database to another database. With the following options, i Can transfer data as far as i know. Please
correct me if i am wrong or tell me if there is any other options are available.
1) Create database link/connection string and using this string and COPY command, we can transfer data.
2) By using Export and Import utilities.
I told first one to my interviewer, he told, its strange, by using, COPY command also can we transfer data ? As far as i know, we can transfer data. Am i right ?
Thanks in advance,
Pal

transfer data from one database to another database.You mean store the data of one to another?
1) Create database link/connection string and using this string and COPY command, we can transfer data.every SELECT on a DB-link is transfering data. And you can have all kind of transfers and store on the e.g CTAS of materialized views or.... the SQL*PLUS COPY :
The COPY command is not being enhanced to handle datatypes or features introduced with, or after Oracle8i. The COPY command is likely to be made obsolete in a future release.
But there are many others. Check for ORACLE Streams, and the "COPY" your interviewer was mentioning is about the operating file system COPY right? That's transportable tablespaces.
http://download.oracle.com/docs/cd/E11882_01/server.112/e17120/tspaces013.htm#ADMIN11403
-- andy

What r the ways to reduce the load time of master data

Hi
The full load of the master data load IP is taking 18hr to 2 days loading on average 2516360 Records
Is their any option to reduce load time as its causing data base lock and impacting transports(other than data selection)
Thanks in advance
Anuj

You will have to do some research. What MD extractor are you talking about?
Test on R/3 system: First try to extract a considerable amount of records via transaction RSA3 in R/3 (10.000 or 100.000). Keep the time that it takes.
Extract the same into BW but only into PSA. Again measure the time.
Load data from PSA into datatarget and see how long this takes. You should now have a picture on where the performance problems are located.
Is the performance also bad for small loads or is there a boundary before which performance is ok. (in other words, is loading 200.000 records ten times longer then loading 20.000 records?)
Suspect the following in R/3:
- datasource enhancements in R/3. A redesign may improve your extraction in a big way.
- missing indexes. If you are extracting data from tables without proper indexes the extraction performance can be dramatic.
Suspect the following if loading to PSA is bad:
- Datapackage reads data in small chunks (much smaller than 50000 records). Overhead causes more time than the actual data transport.
- Network problems. Maybe the network is congested by other servers?
If loading from PSA to datatarget is slow:
- Check start routines for performance.
- Are enough batch partitions available? Sometimes activation of ODS can be improved by more parallel processes.
- Are you using a lot masterdata-lookups when filling the datatargets?
When you report you findings in this forum we may be able to help you further.

Fill data into a form programmatically and print the form afterwards

Folks,
until recently a lab assistant took measurements and filled the data into a paper form (see attached pdf). Now we are building a test stand that does the measurement semiautomatically. The software of the test stand will be programmed in LabVIEW, of course. The test stand shall generate a printed protocol very similar to the attached pdf in future as well.
What's the best way to fill the acquired data into the form and to print the form afterwards? The form can be read by our code in either pdf or html. There is no Microsoft Office installed on the computer.
Modifying the html code? Converting the pdf to a picture and fill the data into the picture? Any hint will be highly appreciated.
Thanks,
Peter
Attachments:
Form.pdf ‏121 KB

Hmmm... must have misunderstood what you were saying.
XSL is a language that allows you to generate an HTML document. The XSL basically defines the style, and the XML specifies the data. HTML is the combination. You can find out more here.
Unfortunately, since you don't have Office, you won't be able to use the ActiveX interface to control Word, so that's out.
With the template in HTML format you could use the DOM for an HTML file to set the value of the HTML elements. The easiest way to do this is to use IE (I'm assuming you're on Windows here) to open the HTML template and then you can use the DOM from there. As for how feasible this is, it would depend on your HTML format. Can you post the template in HTML format?
With the template in PDF format I know that some PDF files that are forms can be generated in such a way that they still act like forms when you open them in, say, Acrobat Reader. Acrobat has an ActiveX interface so you should be able to programmatically do this, but I can't say for sure. You can check the Adobe site for more info. You just need to make sure it doesn't require the full version of Acrobat.

FillBy always fills in the same row in data grid view. How to make it fill in a new row for each click of the Fillby Button? VB 2010 EXPRESS?

Hi there,
I am a beginner in Visual Basic Express 2010. I have a Point of Sale program that uses DataGridView to display records from an external microsoft access
database using the fillby query.
It works, but it repopulates the same row each time, but i want to be able to display multiple records at the same time, a new row should be filled for
each click of the fillby button.
also I want to be able to delete any records if the customer suddenly decides to not buy an item after it has already been entered.
so actually 2 questions here:
1. how to populate a new row for each click of the fillby button
2. how to delete records from data grid view after an item has been entered
Thanks
Vishwas

Hello,
The FillBy method loads data according to what the results are from the SELECT statement, so if there is one row then you get one row in the DataGridView, have two rows then two rows show up.
Some examples
Form load populates our dataset with all data as it was defined with a plain SELECT statement. Button1 loads via a query I created after the fact to filter on a column, the next button adds a new row to the existing data. When adding a new row it is appended
to the current data displayed and the primary key is a negative value but the new key is shown after pressing the save button on the BindingNavigator or there are other ways to get the new key by manually adding the row to the backend table bypassing the Adapter.
The following article with code shows this but does not address adapters.
Conceptually speaking the code in the second code block shows how to get the new key
Public Class Form1
Private Sub StudentsBindingNavigatorSaveItem_Click(
sender As Object, e As EventArgs) Handles StudentsBindingNavigatorSaveItem.Click
Me.Validate()
Me.StudentsBindingSource.EndEdit()
Me.TableAdapterManager.UpdateAll(Me.MyDataSet)
End Sub
Private Sub Form1_Load(sender As Object, e As EventArgs) Handles MyBase.Load
'TODO: This line of code loads data into the 'MyDataSet.Students' table. You can move, or remove it, as needed.
Me.StudentsTableAdapter.Fill(Me.MyDataSet.Students)
End Sub
Private Sub Button1_Click(sender As Object, e As EventArgs) Handles Button1.Click
Me.StudentsTableAdapter.FillBy(Me.MyDataSet.Students, ComboBox1.Text)
End Sub
Private Sub Button2_Click(sender As Object, e As EventArgs) Handles Button2.Click
Me.MyDataSet.Students.AddStudentsRow("Jane", "Adams", "Female")
End Sub
End Class
Get new key taken from
this article.
Public Function AddNewRow(ByVal sender As Customer, ByRef Identfier As Integer) As Boolean
Dim Success As Boolean = True
Try
Using cn As New OleDb.OleDbConnection With {.ConnectionString = Builder.ConnectionString}
Using cmd As New OleDb.OleDbCommand With {.Connection = cn}
cmd.CommandText = InsertStatement
cmd.Parameters.AddWithValue("@CompanyName", sender.CompanyName)
cmd.Parameters.AddWithValue("@ContactName", sender.ContactName)
cmd.Parameters.AddWithValue("@ContactTitle", sender.ContactTitle)
cn.Open()
cmd.ExecuteNonQuery()
cmd.CommandText = "Select @@Identity"
Identfier = CInt(cmd.ExecuteScalar)
End Using
End Using
Catch ex As Exception
Success = False
End Try
Return Success
End Function
In closing I have not given you a solution but hopefully given you some stuff/logic to assist with this issue, if not perhaps I missed what you want conceptually speaking.
Additional resources
http://msdn.microsoft.com/en-us/library/fxsa23t6.aspx
Please remember to mark the replies as answers if they help and unmark them if they provide no help, this will help others who are looking for solutions to the same or similar problem.

How do I set up a .pdf form to save filled data without having to print the form?

How do I set up a .pdf form to save filled data without having to print the form? I have provided my clients a lifecycle .pdf form they can use to record data for unique client meetings. They want the ability to save their completed data whenever they use the form under a unique file name. I've told them the only way I know how to do this is to print the completed form as a .pdf document and then save it.
Is their a way to save the data to a unique file name without printing the filled form?
Is there a way to reset the form with blank fields after saving? or to add a clear fields button?
Thanks.

If you reader extend a pdf using livecycle reader extensions then you can save the filled in data - this is true if you are using Adobe reader to view the PDF's. If you open it in Acrobat then the functionality is already there.

Verizon is using the Elipsis tablets to steal data from their customers. The only way to stop data from registering as cellular data is to pull the SIM card. This occurs with wifi enabled and cellular,dara disabled. If,you take your tablet to a Verizon

Verizon is using the Elipsis tablets to steal data from their customers. The only way to stop data from registering as cellular data is to pull the SIM card. This occurs with wifi enabled and cellular,dara disabled. If,you take your tablet to a Verizonstore they will upgrade your data plan to cover the overage and credit the upgrade. You will then have to remember to downgrade your plan or continue to pay for more data. Verizon, how would you feel if I walked into one of your stores and started filling my pockets with merchandise? If cought can I just give the product back and say "oops, sorry"

Today, my FCC complaint hit the same person working on the BBB complaint. Jimmie has been very nice and seems willing to work with this problem. We have been able to come to an agreement. I paid the purchase price for the phone and he returned my upgrade and unlimited data plan. This is what would have occurred if Verizon had given me correct information to begin with. I am happy with this result. He also brought quite a few instances concerning the handling of my transfer and upgrade that did not follow proper procedure. I am also confident that I would not have resolved this without complaining to BBB and or FCC. Verizon had no interest in solving the problem nor did they show any propensity to keeping a 20 year client. Even though this last CSR was very polite and helpful, his sole job is to respond to formal Federal and State complaints. He is required by law to address every complaint and report the reporting agency the agreed upon results - good or bad. Again, I suggest - If you are not getting the proper customer service, complain to someone outside of Verizon. Jimmie had not received any complaints registered with Verizon directly and I still have not had any contact with any other management representative that I was told would call.

Best way to fill a datagird with A LOT of data?

What's the best way to fill a datagrid with A LOT of data.
I'm talking about something like 10,000 rows. Can the datagrid
handle it? No screen is large enough to show 10,000 records..... is
there a way to load 50, and then when a user scrolls down it loads
the next 50 etc...?

Right. It's not recommended that you load 10,000 rows into
the datagrid at once. Using the data management service with paging
enabled is a much better solution. See the Configuring the Data
Management Service chapter in the Flex2 Developer's Guide for more
info.

The way to fill data in test

Similar Messages

Maybe you are looking for