The way to report on an error
I see a couple of ways of reporting to a user on an error after data validation.
1. Using errorString property.
2. Popping up an Alert.
What are pros and cons of both?
Thanks
Hey robr72339266,
With a single user license, you can install Acrobat on maximum two computers, say, your laptop at work and desktop at office.
But, you cannot use Acrobat on both the machines simultaneously.
You will first need to deactivate Acrobat from the old machine, then install and activate the software on the new OS with the same serial key.
Please Contact | Adobe to seek help on the same.
Regards,
Anubha
Similar Messages
-
Hey guys. My IPhone 3GS is unlocked and i went to update the software and it said that an unknown error has occurred and said it needed to be restored to connect with Itunes. When i got to restore it, it gets about 3/4 of the way done, says an unknown error has occured(1015). I have no clue what to do and all and any help would be amazing.
See Here
https://discussions.apple.com/message/15290457#15290457
From the More Like This on the right... -
having trouble installing ProIX on new Windows 8 machine after XP crash. Get almost ll of the way through and get an error box ... contact system support. Only way out is to abort and then it un-installs. Wondering if a licensing max issue since we didn't get an opportunity to uninstall off of crashed machine?
Hey robr72339266,
With a single user license, you can install Acrobat on maximum two computers, say, your laptop at work and desktop at office.
But, you cannot use Acrobat on both the machines simultaneously.
You will first need to deactivate Acrobat from the old machine, then install and activate the software on the new OS with the same serial key.
Please Contact | Adobe to seek help on the same.
Regards,
Anubha -
Another thing is that I can't get into my iPhone, as in I can only get to the shiny Apple screen and nothing else.
Read this
Errors 3000-3999 (3004, 3013, 3018, 3164, 3194, and so on): Error codes in the 3000 range generally mean that iTunes cannot contact the update server (gs.apple.com) on ports 80 or 443.
Update to the latest version of iTunes.
Verify the computer's date and time are accurate.
Check that your security or firewall software is not interfering with ports 80 or 443, or with the server gs.apple.com.
Follow Troubleshooting security software. Often, uninstalling third-party security software will resolve these errors.
An entry in your hosts file may be redirecting requests to gs.apple.com (see "Unable to contact the iOS software update server gs.apple.com" above).
Internet proxy settings can cause this issue. If you are using a proxy, try without using one.
Test restoring while connected to a known-good network. -
I have never had this problem with my 4 but i just got the 4s and i purchased a song in the itunes app, it downloaded halfway and then stopped. I got a pop up that says Unable To Download At This Time. I have tried it with and without wifi and it still does it. Nothing in my settings is blocking anything that has to do with itunes or my music. I am very confused and would like to know why its doing this
Nevermind I got it
I went to itunes on my iphone and clicked on purchesed and then went to not on this iphone and downloaded it
Thank you all so much for you time and sorry im new to this -
Why doesn't the Quicktime site have an easy way to report broken links?
Perhaps Apple thinks this site is perfect?
The link to 'The heart is deceitful above all things' has been down for DAYS -- surely something the producers of that movie would not be happy about??
There's no simple way (that I can see) to report such a broken link - just for the heck of it I spent 20 minutes looking for a way to report this minor glitch, and there doesn't seem to be one (or I'm missing the obvious).
Maybe someone who can do something will read this!Thanks very much for the link!
...but where is the "link to the link" on the Quicktime site.... if I didn't know where to look for this, how would I find out about it, or realize that this is the way to report a simple broken link?
Is this bad site design or am I just plain blind!?
I'm just frustrated that the site doesn't have a simple way to report this (I've seen similar broken links before on the Movie site, and they often persist for days). If you hadn't helped me out I don't think I would have figured out how to do this! -
When trying to import music files I get an error message Thea says "importer reported a generic error". Also when editing video, screen views look great but when I transfer to PC or flash drive video quality is very poor. Any suggestions?
chansen232
Premiere Elements 13 on Windows 7 (presumed 64 bit).....
1. Music files and error message...are these music files from iTunes? If so, convert them to .wav in iTunes to convert them to wav version, and then import the .wav version into Premiere Elements 13 project using Premiere Elements 13 Expert workspace's Add Media/Files and Folders/Project Assets from where you drag the wav version to the Soundtrack.
The following are the instructions for the iTunes converting
http://support.apple.com/en-us/HT1550
If any problems with the instructions, please let me know, and I will go through them with you.
2. How you set up the project and the export settings that you select greatly influence your end product result.
a. What are the properties of the source media?
b. What project preset did you (manually) or the project (automatically) set to match the properties of the source media.
(If you do not know, please tell us what you see for the readings of Editing Mode, Timebase, Frame Size, Pixel Aspect Ratio - even
if the fields look grayed out.)
c. For your export...Publish+Share/Computer/and then what? And what preset? Did you use the default settings of the preset or did you
customize the export settings of the preset under the preset's Advanced Button/Video Tab and Audio Tab?
Let us start here and then decide what next.
Thanks.
ATR -
External Hard Drive: Error: The underlying task reported failure on exit
I have a LACIE external drive (120GB/ firewire) which has had no problems. Recently, I reformatted to DOS so I could use with a PC. Now, when I plug into my MACBOOK Pro, the drive is not 'recognized. I've tried to repair with Disc Utility but I get the following messages:
+Error: The underlying task reported failure on exit+
and
+1 volume could not be repaired+
Reading up on the subject, seems I could purchase Disc Warrior but I've also read that there might be a problem with 10.4.10 which potentially could be alleviated by rolling back my OS.
Before I shell out for DW; does anyone have any thoughts on rolling back the OS or perhaps other ways to resolve? What is the correct method for rolling back to a previous OS?
Best,
RodHi guys, I just received the same message on my G5 with a hard drive that I've been using for about two years. Today when I turned on my computer, I saw the icon for my second internal hard drive which is a Western Digital 250 Gb. When I clicked on the icon in finder, it didn't show me any files on my drive and soon after, the icon just vanished. I turned off my computer and made sure that all the connections where in properly and they were. I also tried other hard drive to make sure there was nothing wrong with the connectors, and they worked fine. When I go to disk utility, I see my hard drive but its not bolded, the title of the drive is faded and if I try to verify disk or repair, I get the Error: The underlying task reported failure on exit (-9972) 1 volume checked, 0 HFS volumes verified, 1 volume failed verification.
I've had hard drives die on me before and I know where they are going to go due to the sound that it makes but today my computer was as quiet as can be. What is the problem here and is there something I can do to get the hard drive to work so I can retireve my data?
Thanks -
I used to print all my BioBench data by first exporting them to Excel and then print from there. Recently I need to print some of the screen shots and some data directly from array analysis, but when I click on the "print" buttons, the "Error, the printer is not set up correctly" message occurs. The only thing I can print from BB without this error is the report printing function. I have a postcript printer and I have set the postscript option to be "true"... Thanks !
This problem is a result of a limitation in Windows 9x regarding the size of an image that you can send to the printer. The problem does not occur on Windows 2000/NT. This problem appeared with the increased color options of LabVIEW 6.0 on which the BB1.2 is based.Although it is not immediately obvious, your video driver and settings play a role in printing.
1. Try adjusting the color palette your driver uses (i.e., 256 color, high olor, true color). The error may occur only in one of these modes. Also, change the resolution (number of pixels) to represent the Screen Area; e.g., change from a 1024 x 768 display to an 800 x 600 pixel display.
2.Certain video drivers also support "acceleration" modes. Using a non-accelerated mode often eliminates the error. For
Windows 95/98, right-click on your My Computer icon and select "Properties" from the pop-up
menu. On the Performance tab, click the Graphics button and change the Hardware Acceleration (e.g., if it is set to "Full", lower the setting a notch or two); for Windows 2000/NT, right-click on your Desktop and select "Properties" from the pop-up menu. On the Settings tab, click the Advanced button and go to
Troubleshooting.
3.In Windows, the standard VGA driver provided by the operating system is very stable. Try using this driver in place of the specific one written for your video hardware. If the error is eliminated, there is likely a problem with your vendor-provided video driver.
4.These errors are most often fixed with the latest
video/printer driver. Be sure to contact your hardware manufacturer and install the latest driver. An easy way to determine if your error is "driver-related" is to move your code to another machine (and hopefully a different set of drivers) and see if th
e error persists. If the problem is printer related, try another printer.
5.Make sure there are at least 100M avalible space in your C: drive. If not, set the virtual memory to the other drive which has larger available space. -
Severe Error Ocurred on the Current Command REPORT BUILDER SSRS 2008
Hi,
I have a report with 6 tabs, I am using totally 8 Stored Procedures for it.I am using SQL SERVER 2008 R2 and the same in production also.
Everything works fine when I run the report in my local machine's BIDS, however, when I deploy it into the Production, it occasionally gives an error which reads "An error has occurred during local report processing. (rsProcessingAborted). Query execution
failed for dataset 'DS_xxxx'. (rsErrorExecutingCommand)
A Severe error occurred on the current command. The results, if any, should be discarded. Operation cancelled by user.
When I ran the SPs individually in the SSMS they are executing fine and the report itself works fine always in my local BIDS.
Also, This issue happend several weeks after the report was deployed to the production, i.e. it was working fine but suddenly it started giving this error, so I changed the global temp table I was using to a permanent table and then it worked fine for a
few more weeks, now, again, I am getting the same error occasionally, is there any way to avoid this error completely and can you list all the possible causes for this error, because it happens 2 times out of 5 runs so it is difficult to debug it also.
As for the Report it self, It is a simple report with a few spark line Charts and a mostly data charts. I am not using any CTEs or Global Temp Tables anywhere in the report.
Thanks You.Hi,
I would suggest you increase the time out on the reports to 3600 and how it works.
You can set a default value for all reports in the Site Settings page.
The default timeout in SSRS for reports is 1800 seconds.
If still no progress, please check the RS log.
For more information, see
Set Report Processing Properties.
Thanks.
Tracy Cai
TechNet Community Support -
Changes to „Report Options" don't affect output in the way I expect
Changes in the „Report Options“ Window don’t affect report-files in the way I expect. For Example: when I set “Report Format” to “Web Page” the output is a html-file but changes in the “Report Colors”-dialog don’t affect the output. When “Report Format” is set to “ASCII Text File” I get the same file shown in a texteditor – with html-tags and so on (not what I expected). The “Insert Graph”-option doesn’t work, too.
Has anyone an idea what‘s going wrong with my TestStand-installation?
Thanks!Hi Daniel,
This is most interesting. Something is not working right here. The next thing I would suggest is that you try debugging the model and report generation sequences to see exactly what is going on. Here are some suggestions:
1) Launch the Sequence Editor.
2) Double click on the "Model" text in the status bar, this will open your station model.
3) Place a breakpoint on the "TestReport Callback" step inside of the "Single Pass" sequence.
4) Go to Configure>>Station Options and on the Execution tab select: Trace Into Entry Points option. Close this dialog by clicking OK.
5) Go to Configure>>Report Options and select the Sequence option and modify the other options to what you desire. Be sure to select the HTML report generation however. Close this dialog by clicking OK, not Cancel.
6) Load the sequence file, \Examples\Demo\C\computer.seq.
7) Select Single Pass from the Execute menu.
8) When the execution stops at the breakpoint, select the Context tab and navigate to Locals.ReportOptions. Quickly browse through the properties to make sure they are set to what you changed in the dialog.
9) Swicth back to the Steps tab and click step into.
10) Step over until you get to the "Get Report Body" sequence call, and then click step into.
11) Click on the Context tab and navigate to "RunState.SequenceFile.Path". Check this path. It should be pointing to "\Components\NI\Models\TestStandModels\ReportGen_html.seq".
11) Also check the values inside of Parameters.ReportOptions. These should resemble what you have selected on the Report Options dialog.
12) Continue single stepping, and stepping into subsequence calls, until an error is generated. Once the error occurs, select Break on the error dialog, and then examine the step that failed. Check to make sure that all the preconditions are correct and that any properties stated do actually exist.
13) If the step is configured to call a DLL make sure that the DLL it is calling is from the NI directory under \Components. You can do this by bringing up the specify module dialog for the DLL and checking the path.
By the way, the files I sent you are for TestStand 2.0.1f1. Is this your correct version? Please let me know if any of the above steps fail, and exactly what you are seeing. Thanks! -
When the system status says icloud is OK but logon reports "encountered an error when connecting to the server", where do you report the problem, or how do you connect?
Yes i am hoping staff here will look into things, even if i can not get the speeds back what i previously had for near 6 months it would be nice to know why i can not and why the download has dropped by around 10Mb and why my upload is now inconsistant.
Ironically the post concerned got edited because i actually posted the full rather silly reply the Indian call centre made babbling on about down rates rather than the uprate i queried with them.
Bit of a shambles really no real way on BTs web site to contact anyone with regards to broadband issues.
The form which you kindly suggested and i appreciated your help ended up in the hands of someone who either did not bother to read the query or just had such a poor grasp of English they did not understand the query.
Pretty pathetic really when BT are the largest telco in the UK. I think ill be taking my broadband business elsewhere regardless at the end of my 18 month contract, while im sure staff here are wonderful and may even yet help me, i do not particularly want to go through the almost like pulling teeth pain of getting any future issue looked at.
They are great at quickly fixing voice line problems and have a great test on their site. Broadband side of things and support for that though seems a shambles. -
MacBook won't boot - Error: The underlying task reported failure on exit
My wife's new MacBook won't start up. It crashed earlier today and when she tried to restart it, it got as far as the gray Apple logo and the spinning gear and then it reboots again. I booted it with the Leopard install disc and two strange things happened.
1. When the installer first opens, it gives me an error that says I cannot install Mac OS X on this computer. This is a 3 month old MacBook that shipped with Leopard, but it's telling me that OS X can't be installed.
2. When I run verify or repair permissions with Disk Utility from the Leopard disc, I almost immediately get an error stating "The underlying task reported failure on exit". When I try to verify or repair the disk, it says everything is fine.
The HD appears to be fine. I can access it from Firewire Target Disk Mode and everything is still there. I can also boot into Single User Mode, but not Safe Mode.
The night before the crash I made a change to the HD permissions via "Get Info". I copied the "Read/Write" settings to all enclosed folders because it was telling me that it couldn't install Flashplayer because I didn't have sufficient permission, even though she has an Admin account. After the change, Flashplayer installed just fine and everything was OK until this afternoon when she had a kernel panic while iChatting. iChat was the only program open at the time. She rebooted and hasn't gotten past the gray Apple logo since. I read in some other threads about people having the same issue after accidently setting HD permissions to "none". One suggestion was to use Firewire Target Disk Mode to open the drive with another computer and change the permissions back. I tried that, and the drive opened just fine, as I mentioned, but the permissions didn't appear to be set in a way that would cause problems. I set all of them to read/write and applied them to all enclosed folders just to be sure, but nothing changed when I rebooted.
Any other suggestions will be much appreciated. Thanks!ndelc wrote:
When I looked at the permissions for the HD in FW Target Disk mode, it was set to:
System: Read/Write
Admin: Read/Write
Everyone: Read Only
This is not your problem unless you have changed the r/w for special accounts elsewhere.
I have the same on my HD. But it's the individual files that are important.
Nothing there indicates that it should be locking her account out.
How do you create a new admin account from the Leopard DVD? It wouldn't allow me to do much of anything except Disk Utility.
I have not done it so I don't know, but there is a way to create a new administrator account using the DVD. Search these forums because I know others have done it.
Would it be possible to attempt to change things back by booting into single user mode? If so, what do I need to do?
I am not sure you can even boot into the Single User mode, or do you mean the Super User mode?
You have taken write privs away from everyone so I believe only a Super User can fix it. I am not even sure the Sudo will work in your case.
Thanks for your help!
If you find out how to access your drive from the Leopard DVD, you need to invoke SU privileges and undo whatever it was you did.
Were you using Time Machine? That would make fixing it a piece of cake. Just revert to the last backup before you made these changes.
Message was edited by: nerowolfe -
Can't boot up and error "The underlying task reported failure on exit"
I've spent some time searching the forums and internet for my problem to no avail, so hopefully this isn't something that was posted before.
I recently upgraded my internal drive on my Macbook. Everything has been fine for a week or so, and Leopard ran smoothly. Yesterday, the machine got hung up on backing up to Time Machine. For whatever reason, it got hung up and now all I get when I try to reboot is a gray screen, the Apple logo, and a spinning progress disc.
I can boot from another external drive just fine, and the data on the disk is all there. I just cannot boot from my master internal drive.
I ran Disk Utility from the other external drive (also runs Leopard), and when I try to repair the disk, Mac OS X says everything is fine.
However, when I try to repair permissions, I get the following error:
Verify permissions for “John HD”
Error: The underlying task reported failure on exit.
Permissions verification complete
That's it...nothing else to it. I cannot seem to get over this error no matter what.
Also, I'm a bit nervous because my Time Machine folder has a folder labeled "Update in Progress" that is all white. Will I be able to backup from Time Macine, or is that data now corrupted?
Thanks, and any help will do!
John
Macbook Core 2 Duo 2.0 Ghz
2 Gig of RAM
Note...I have the same thread in the Time Machine section, since I didn't know where to post this.By the way, this is the information that Disk Utility gives me when I try to repair the disk and then repair the permissions:
Verify and Repair volume “John HD”
Checking Journaled HFS Plus volume.
Checking Extents Overflow file.
Checking Catalog file.
Checking multi-linked files.
Checking Catalog hierarchy.
Checking Extended Attributes file.
Checking volume bitmap.
Checking volume information.
The volume John HD appears to be OK.
Repairing permissions for “John HD”
Error: The underlying task reported failure on exit.
Permissions repair complete
Like I said, the drive seems healthy enough. I just cannot get it to boot.
John -
Disk Utility Error: The underlying task reported failure on exit 1
#!/bin/bash
# Author : Bill Hernandez
# Location : Plano, Texas
# Updated : Saturday, June 6, 2009 (1:48 PM)
# script name : setdisk_ownerenabled
# make sure to set permissions to execute
<hr>
# Description :
<hr>
# I've noticed that sometimes when using disk utility I cannot repair permissions, or I might get :
# ERROR: The underlying task reported failure on exit 1
# This shell script seems to have solved the problem.
# It worked very well for me,
# IF YOU USE THIS SCRIPT, IT IS AT YOUR OWN RISK...
# DO NOT USE IT UNLESS YOU UNDERSTAND WHAT IT DOES
# After running it, it is best to restart before using Disk Utility again
<hr>
# Details :
<hr>
# After partitioning a disk using "Disk Utility", and then begin using it, at some point I would get
# an arror message when trying to save to one of the partitions, yet when I looked at the permissions
# everything looked fine. I would then try to use Disk Utility to repair permissions and end up with a
# cryptic error that pretty much told me nothing.
# I noticed that while in Disk Utility, if I selected a partition the lower LH corner of the dialog
# showed : Owners Enabled : No
# I tried selecting the partitions at the Desktop and doing a (CMD-I) and at the very bottom of each
# info dialog there was a checkbox :
# [ ] ignore ownership of this volume
# which I would check, even after logging in as root, and I couldn't seem to get a consistent way
# to get rid of the permissions dialog failure, so I found the vsdbutil command which can be used
# as follows to get partition, or disk info :
# $ vsdbutil -c /Volumes/driveor_partitionname
# ----> Permissions on '/Volumes/driveor_partitionname' are enabled.
# if it is not enabled you can enable the disk or partition using :
# $ vsdbutil -a /Volumes/driveor_partitionname
# It will set "Owners Enabled : Yes"
# This below script loops through the mounted disks, partitions, etc. and gives you information.
# You can leave the three flags below all set to TRUE, or selectively use what you want and change
# the rest to false...
<hr>
# CHOOSE {"TRUE", "FALSE"}
<hr>
getvolumestatus="TRUE" # get "Owners Enabled : (Yes|No)" status
setvolumestatus="TRUE" # set "Owners Enabled : Yes"
list_volumes="TRUE" # show volume names
<hr>
# DO NOT CHANGE ANYTHING BELOW HERE
<hr>
if [ $getvolumestatus == "TRUE" ]; then
echo '============================='
echo '$getvolumestatus'
echo '============================='
# get "Owners Enabled : (Yes|No)" status
for i in $( df -l | sort -u | awk '{print $6}' | grep '/' ); do
vsdbutil -c $i
done
fi
<hr>
if [ $setvolumestatus == "TRUE" ]; then
echo '============================='
echo '$setvolumestatus'
echo '============================='
sudo echo -n
# set "Owners Enabled : Yes"
for i in $( df -l | sort -u | awk '{print $6}' | grep '/' ); do
sudo vsdbutil -a "$i"
echo "setting Owners Enabled : Yes for ---> $i"
done
fi
<hr>
if [ $list_volumes == "TRUE" ]; then
echo '============================='
echo '$list_volumes'
echo '============================='
for i in $( df -l | sort -u | awk '{print $6}' | grep '/' ); do
echo $i
done
fi
<hr>
As it turns out, this didn't completely solve the problem, it solved part of the problem.
Here is a summary to the root cause of the problem.
SUCCESS...
Problem Summary : The system crashed and would hangup during boot, tried many things, until I eventually erased the disk and started over again.
iMacG5 24 GHZ Intel with One internal disk partitioned into 3 logical drives
Cub_1 OS X 10.5.7
Cub_2 OS X 10.5.7 (Carbon Copy Cloner backup of Cub_1)
Cub_3 OS X Server 10.5.7 (standard os x server setup)
At some point after setting up standard preferences, OS X Server crashed.
When I tried to restart, the machine would hang up during boot.
Finally after several attempts, ran Disk Utility from install dvd and repaired Cub_3
When I tried to run "Repair Permissions" on Cub_3 from install dvd, I got an error
Disk Utility Error: The underlying task reported failure on exit 1.
Rebooted, and started in single user mode (CMD-S) during boot until I saw the unix commands on the screen
RAN : root # fsck -fy
Then I began seeing the same command filling the screen :
posix_spawnp("/usr/sbin/mDNSResponder") could not find file or directory
Called Enterprise Support and spoke to Frank Alcorn, he said this was most likely a permissions problem and asked me to try repairing permissions from the install dvd. I told him about the error, but nevertheless I tried it again and got the same Disk Utility Error: The underlying task reported failure on exit 1..
He asked me to try booting into single user mode again, and to try
root # chmod 775 /
root # reboot
During the reboot process the machine got hung up again, and could not get the single user mode to work at all.
Frank said the command needed to be :
root # chmod 1775 /
Frank asked me if I had changed anything in file sharing, and I told him I had. He asked me what I had shared, and I said the entire drive Cub_3. He asked me what I had done for permissions, if I had denied permissions to anyone. I told him that I had set myself up as the only user that could have access to it, and when he said that's where the problem was the lightbulb went off, and it made sense.
Shortly after I set the sharing preferences is when the server crashed. It all makes sense now...
Frank said not to share the entire disk, only portions (share points) of it. I had done this in Panther Server, and Tiger Server and it worked fine, but apparently Leopard Server works a little differently, maybe more secure.
It seems to me that if sharing the entire disk, which is what I needed would cause such a problem there should have been some sort of warning from the operating system, but there wasn't. I had run into this problem several times over the past three weeks since I had started working with Leopard Server, but in each case I ended up re-installing OS X Server and starting over again.
I told him I would try to reboot from the OS X partition (Cub_1) and try it from there.
He asked me to let him know if it worked, and I said I would...
Problem FIX :
I booted back into the partition containing OS X (Cub_1) and did the following via the Terminal.
$ su - root
$ chmod 1775 /
$ reboot
During the reboot process I held down the (OPTION) key, and selected Cub_3 (the os x server partition) and sure enough after a few minutes of holding my breath the login window magically appeared. So I logged in, and did not have to re-install the server. Hallellujah....
This solved the boot hang problem. It is great to finally have an answer. In retrospect it makes sense, but that's why its hindsight...
The reason for sharing the entire disk in my mind was that since I was the only user on the system, it was easier to have one disk mounted on my workstation rather than several folders. It made sense to me, it still does. I don't need a bunch of folders, just one disk is easier...
Maybe you are looking for
-
I have created an temp.xml file from a couple other source xml's. I am using this temp.xml and an xslt I created to output text in a csv format. Unfortunately I am seeing the data in the text file incorrectly and I am not sure why. I see somethign li
-
I upgraded My PC HP D530 mtc To 4GB Corsair Memory Ram & also upgraded from Win Xp Pro To Win 7 Ultimate And Last Of All I Upgraded My Graphic's Card To 512mb Nvidia Geforce 6200. I Have Defraged My Pc Etc,But My Pc Seems To Take Ages To Open Next Pa
-
Hi all I am planning to Modify some JSPs present in the CRM Internet Sales Application(b2b) using NWDS. But i am really unawared of steps to be follwoed to import, modify and deploy the application. Could anybody help me out in this ??? Please no
-
Help with SD_SALESDOCUMENT_CHANGE
Good day, I am trying to use SD_SALESDOCUMENT_CHANGE to update a schedule agreement that was created in VA31. Advice I current have been given is that only the data that needs changed has to be entered. At a bare minimum I use document number in th
-
To DaveyB re: variable data might not have been initialised
I tried to reply to your thread but got a server error. It's not happening for other threads, and I don't know if others are experiencing the same problem. If you don't get a response within the next hour, try posting again, or just reply here. In th