'There are no events to show' error on the iOS BT ...

Hi all,
Some of you may have seen this error message 'there are no events to show' when using the BT Sport app via an Apple device. If you have, please follow the advice below to fix it.
1)      Go into your device’s settings;
2)      Change the clock time to 24 hours, and the time on your device time zone to “automatic”;
3)      Log out of the app and log back in (note, you do not need to uninstall/re-install the app);
4)      The app will then start to work, provided you have enough WIFI signal.
If you do not have enough WI-FI signal, you can use 3G (which is subject to your network’s charges), but you need to remember to activate the streaming content by choosing “General enable mobile streaming” in the app, otherwise 3G won’t work.
Thanks
Craig
BTCare Community Mod
If we have asked you to email us with your details, please make sure you are logged in to the forum, otherwise you will not be able to see our ‘Contact Us’ link within our profiles.
We are sorry but we are unable to deal with service/account queries via the private message(PM) function so please don't PM your account info, we need to deal with this via our email account :-)”
td-p/30">Ratings star on the left-hand side of the post.
If someone answers your question correctly please let other members know by clicking on ’Mark as Accepted Solution’.

jelect,
What kind of triggering did you want for the mic input on your PDA? did you want to start acquiring when someone starts speaking, or something along those lines? If that's the case, then what you could do is continually call the SI Read.vi and poll to see if the voltage changes by a certain amount. Then, when that happens, do any processing that you need to.
As for the Peak Detector VI, here is the link to a knowledgebase on our website discussing this issue: http://digital.ni.com/public.nsf/websearch/EE144F58DCBE406B86256F1F00669514?OpenDocument
I hope this helps. have a great day!
Tyler S

Similar Messages

There are tabs with bookmarks showing up in the tab bar that won't close. Why do they come up and why can't I close them?

I can't close the bookmark tabs that show up automatically at the tab bar. I don't want them to open or show up. When they show up I can't close them and everything in the tab bar gets frozen. So I'm just stuck. Firefox won't even quit when this happens. How can disable these bookmark tabs from showing up. They are a nuisance.
I also need instruction on eliminating bookmarks that came with Firefox. I deleted them, but they showed up again.

Can you attach a screenshot?
*http://en.wikipedia.org/wiki/Screenshot
*https://support.mozilla.org/kb/how-do-i-create-screenshot-my-problem
Use a compressed image type like PNG or JPG to save the screenshot.
Do you mean the thumbnails in the 3x3 grids on the about:newtab page?
See this article about the New Tab page (about:newtab):
*https://support.mozilla.org/kb/new-tab-page-show-hide-and-customize-top-sites

Abap wp table - there are no items to show in this view

My apologies if I posted this in the wrong section.
I started the system in SAPMMC Console and The ABAP WP Table don´t show any work process list and in Process List section the disp+work.EXE (Dispatcher) IS stopped.
basically the abap WP table says there are no items to show in this view.
as a result, i'm not able to start SAP or log in.

I got the same problem, dispatcher status showing as stopper and remaining two are running in the process list
here is the dev_w0 file. I got dev_w0.old also if you want i will also send. It has been more than a year i started the server. before it used to work.
Thanks in advance
trc file: "dev_w0", trc level: 1, release: "700"
* ACTIVE TRACE LEVEL           1
* ACTIVE TRACE COMPONENTS      all, MJ
B
B Fri Jun 15 19:31:21 2012
B create_con (con_name=R/3)
B Loading DB library 'D:\usr\sap\EC6\DVEBMGS06\exe\dboraslib.dll' ...
B Library 'D:\usr\sap\EC6\DVEBMGS06\exe\dboraslib.dll' loaded
B Version of 'D:\usr\sap\EC6\DVEBMGS06\exe\dboraslib.dll' is "700.08", patchlevel (0.73)
B New connection 0 created
M sysno      06
M sid        EC6
M systemid   560 (PC with Windows NT)
M relno      7000
M patchlevel 0
M patchno    75
M intno      20050900
M make:      multithreaded, Unicode, optimized
M pid        2468
M
M kernel runs with dp version 217000(ext=109000) (@(#) DPLIB-INT-VERSION-217000-UC)
M length of sys_adm_ext is 572 bytes
M ***LOG Q0Q=> tskh_init, WPStart (Workproc 0 2468) [dpxxdisp.c   1299]
I MtxInit: 30000 0 0
M DpSysAdmExtCreate: ABAP is active
M DpSysAdmExtCreate: VMC (JAVA VM in WP) is not active
M DpShMCreate: sizeof(wp_adm)            18304 (1408)
M DpShMCreate: sizeof(tm_adm)            3994272     (19872)
M DpShMCreate: sizeof(wp_ca_adm)         24000 (80)
M DpShMCreate: sizeof(appc_ca_adm) 8000 (80)
M DpCommTableSize: max/headSize/ftSize/tableSize=500/8/528056/528064
M DpShMCreate: sizeof(comm_adm)          528064      (1048)
M DpFileTableSize: max/headSize/ftSize/tableSize=0/0/0/0
M DpShMCreate: sizeof(file_adm)          0     (72)
M DpShMCreate: sizeof(vmc_adm)           0     (1440)
M DpShMCreate: sizeof(wall_adm)          (38456/34360/64/184)
M DpShMCreate: sizeof(gw_adm)      48
M DpShMCreate: SHM_DP_ADM_KEY            (addr: 06640040, size: 4653368)
M DpShMCreate: allocated sys_adm at 06640040
M DpShMCreate: allocated wp_adm at 06641E40
M DpShMCreate: allocated tm_adm_list at 066465C0
M DpShMCreate: allocated tm_adm at 066465F0
M DpShMCreate: allocated wp_ca_adm at 06A15890
M DpShMCreate: allocated appc_ca_adm at 06A1B650
M DpShMCreate: allocated comm_adm at 06A1D590
M DpShMCreate: system runs without file table
M DpShMCreate: allocated vmc_adm_list at 06A9E450
M DpShMCreate: allocated gw_adm at 06A9E490
M DpShMCreate: system runs without vmc_adm
M DpShMCreate: allocated ca_info at 06A9E4C0
M DpShMCreate: allocated wall_adm at 06A9E4C8
X
X Fri Jun 15 19:31:22 2012
X EmInit: MmSetImplementation( 2 ).
X MM global diagnostic options set: 0
X <ES> client 0 initializing ....
X Using implementation flat
M <EsNT> Memory Reset disabled as NT default
X ES initialized.
M
M Fri Jun 15 19:31:23 2012
M ThInit: running on host visuinfoec6
M
M Fri Jun 15 19:31:24 2012
M calling db_connect ...
C Prepending D:\usr\sap\EC6\DVEBMGS06\exe to Path.
C Oracle Client Version: '10.2.0.1.0'
C Client NLS settings: AMERICAN_AMERICA.UTF8
C Logon as OPS$-user to get SAPSR3's password
C Connecting as /@EC6 on connection 0 (nls_hdl 0) ... (dbsl 700 110706)
C Nls CharacterSet                 NationalCharSet              C      EnvHp ErrHp ErrHpBatch
C    0 UTF8 1   06C68BC8   06C6E164 06C6D9EC
C Attaching to DB Server EC6 (con_hdl=0,svchp=06C6D938,svrhp=06C7F204)
C
C Fri Jun 15 19:31:25 2012
C *** ERROR => OCI-call 'OCIServerAttach' failed: rc = 12541
[dboci.c 4172]
C *** ERROR => CONNECT failed with sql error '12541'
[dbsloci.c 10933]
C Try to connect with default password
C Connecting as SAPSR3/<pwd>@EC6 on connection 0 (nls_hdl 0) ... (dbsl 700 110706)
C Nls CharacterSet                 NationalCharSet              C      EnvHp ErrHp ErrHpBatch
C    0 UTF8 1   06C68BC8   06C6E164 06C6D9EC
C Detaching from DB Server (con_hdl=0,svchp=06C6D938,srvhp=06C7F204)
C Attaching to DB Server EC6 (con_hdl=0,svchp=06C6D938,svrhp=06C7F204)
C
C Fri Jun 15 19:31:26 2012
C *** ERROR => OCI-call 'OCIServerAttach' failed: rc = 12541
[dboci.c 4172]
C *** ERROR => CONNECT failed with sql error '12541'
[dbsloci.c    10933]
B ***LOG BY2=> sql error 12541 performing CON [dbsh#2 @ 1204] [dbsh    1204 ]
B ***LOG BY0=> ORA-12541: TNS:no listener [dbsh#2 @ 1204] [dbsh    1204 ]
B ***LOG BY2=> sql error 12541 performing CON [dblink#3 @ 431] [dblink 0431 ]
B ***LOG BY0=> ORA-12541: TNS:no listener [dblink#3 @ 431] [dblink 0431 ]
M ***LOG R19=> ThInit, db_connect ( DB-Connect 000256) [thxxhead.c   1411]
M in_ThErrHandle: 1
M *** ERROR => ThInit: db_connect (step 1, th_errno 13, action 3, level 1) [thxxhead.c 10156]
M
M Info for wp 0
M
M    stat = 4
M    reqtype = 1
M    act_reqtype = -1
M    rq_info = 0
M    tid = -1
M    mode = 255
M    len = -1
M    rq_id = 65535
M    rq_source = 255
M    last_tid = 0
M    last_mode = 0
M    semaphore = 0
M    act_cs_count = 0
M    control_flag = 0
M    int_checked_resource(RFC) = 0
M    ext_checked_resource(RFC) = 0
M    int_checked_resource(HTTP) = 0
M    ext_checked_resource(HTTP) = 0
M    report = >                                        <
M    action = 0
M    tab_name = >                              <
M    vm = V-1
M
M *****************************************************************************
M *
M * LOCATION    SAP-Server visuinfoec6_EC6_06 on host visuinfoec6 (wp 0)
M * ERROR ThInit: db_connect
M *
M * TIME        Fri Jun 15 19:31:26 2012
M * RELEASE     700
M * COMPONENT   Taskhandler
M * VERSION     1
M * RC          13
M * MODULE      thxxhead.c
M * LINE        10354
M * COUNTER     1
M *
M *****************************************************************************
M
M PfStatDisconnect: disconnect statistics
M Entering TH_CALLHOOKS
M ThCallHooks: call hook >ThrSaveSPAFields< for event BEFORE_DUMP
M *** ERROR => ThrSaveSPAFields: no valid thr_wpadm [thxxrun1.c   720]
M *** ERROR => ThCallHooks: event handler ThrSaveSPAFields for event BEFORE_DUMP failed [thxxtool3.c 260]
M Entering ThSetStatError
M ThIErrHandle: do not call ThrCoreInfo (no_core_info=0, in_dynp_env=0)
M Entering ThReadDetachMode
M call ThrShutDown (1)...
M ***LOG Q02=> wp_halt, WPStop (Workproc 0 2468) [dpnttool.c   327]
Thanks
Vijaya

I use Microsoft Outlook for email, and every day, dozens and dozens of times per day, a blank white Firefox window pops up and says "There are no items to show in this view."

That’s all it says in the whole window that opens up. There doesn’t seem to be a specific thing I do that makes it happen and it doesn’t happen every single time I have it open, but pretty close. It seems to happen (most of the time) when I click on the “Today” or “Yesterday” (ect) tabs that organize the emails. But again, it doesn’t happen every time I do this – maybe 8 out of 10 times? It also does it when I just open my Outlook screen to look at it before I even do anything, and sometimes it just does it without even touching it. Also, pretty much every time I send an email it opens a couple pages up. It also doesn’t happen just once, it will open sometimes 5 – 10 of the same screen all at once. My IT person at work suggested deleting Firefox to see if it would stop and it didn't, it would just open up a window saying you have no Firefox so download it. I re-installed Firefox and it still does the same thing – mostly – except now it asks if I want to download the file instead of just opening that white Firefox screen. If I click yes it opens the same screen but it will still open sometimes 5 of those asking if I want to download it.

Microsoft published some articles about this error last year. It might not be the only cause, but can you forward it to your IT for consideration?
[http://support.microsoft.com/kb/2559926 "There are no items to show in this view." error message when you try to view a folder by using Outlook in an Exchange Server 2010 environment] (Group by)
[http://support.microsoft.com/kb/2500648 "There are no items to show in this view." error message when you try to view a folder in Outlook in an Exchange Server 2010 environment] (Sort by Categories)
Edit: As a short-term workaround, what happens if you make IE your default browser? You can still use Firefox as your primary browser, but of course links and shortcuts from other applications or the desktop will open in IE.

I am having multiple issues with syncing my iphone calendar and outlook There are often 1 hour time differences in the entries on the 2 devices and sometimes events that have been amended are not updated on iphone I mostly enter items on my laptop

I am having multiple issues with syncing my iphone calendar and outlook calendar on my laptop
I mostly enter the original items on my laptop
There are often 1 hour time differences in the entries on the 2 devices and sometimes events that have been amended are not updated on iphone

This sounds like an error in Time Zone support. The time zone needs to be the same in Outlook as well as the phone.

How to change the default text "There are no items to show in this view" in the visual webpart

Hi,
I am using a visual webpart and in that if there are no items in the list it is showing the default text "There are no items to show in this view." I want to change this default text.
I checked the forums here there are multiple ways are shown but no one is working for me.
Kindly help me to change this text.
Thanks in advanced.

It seems you're retrieving items inside a specific you.. why not having a <div> inside you're visual web part and check to see if the count of items retrieved is > 0 then insert that in the div, otherwise, insert your custom message and not rendering
the web part itself. What you're describing is the default message from SharePoint which comes from default views, and this can be changed from xslt in SP 2010 or in JSLink in SP 2013, here's a link how to do so in JSLink :
http://www.idubbs.com/blog/2015/jslink-csr-to-override-there-are-no-items-to-show-in-this-view/ .
But as said, since you're doing a visual web part, keep your stuff in the visual web part and check for the count of items before adding the rendered data to your div.
Mohamed Derhalli
SharePoint Consultant
Blog: SharePoint Thoughts
Twitter:
LinkedIn:

All "Site Content and Structure" default views incorrectly showing "There are no items to show in this view"

Hi All,
On my SharePoint Online site (Office 365) all my “Site Content and Structure” default views are showing “There are no items to show in this view”. For example the “Checked out To Me” view shows “There are no items to show in this view” (shown in screenshot
below). I know this is incorrect and should show at least ten items that have been checked out to me for over two months. I am also a member of the Site Collection Administration and Owner groups.
What I am trying to do is view all the "Checked Out items" within a Site Collection including it's sub-sites.
Is there a feature that needs to be activated to get the correct information from the “Site Content and Structure” default views?
I hope you can help
Colin

Hi Colin,
As I understand, all “Site Content and Structure” default views are showing “There are no items to show in this view” in your SharePoint online site.
Check things below:
1. Go to site content and structure logs in site setting to check if there is correct information.
2. Create a new site collection to check if there are items in Site Content and Structure.
3. Switch another computer to check if it can work.
If the issue still exists, I recommend you to post it in the O365 forum.
http://community.office365.com/en-us/f/default.aspx
The reason why we recommend posting appropriately is you will get the most qualified pool of respondents, and other partners who the forums regularly can either share their knowledge or learn from your interaction with us. Thank you for your understanding.
Best regards,
Sara Fan
TechNet Community Support
Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact
[email protected]

Exchange Groups showing "There are no items to show in this view."

We're running a three server Exchange 2013 DAG that we moved to from Exchange 2007.
Distribution groups don't appear to be displaying the membership since we migrated to Exchange 2013. In AD the members are there, and if you log in to ECP the members show when you manage the group, and even in Powershell if you do a Get-DistributionGroup
-id "GroupName" | Get-DistributionGroupMembers the member show. But when you are in OWA, go to the All Group's address list, and click on a group it says "There are no items to show in this view".
I made sure that the Set-DistributionGroup -id "Name" -forceupgrade was done (didn't need to, says it doesn't modify anything).
Not sure why the members are not showing up?

We're running a three server Exchange 2013 DAG that we moved to from Exchange 2007.
Distribution groups don't appear to be displaying the membership since we migrated to Exchange 2013. In AD the members are there, and if you log in to ECP the members show when you manage the group, and even in Powershell if you do a Get-DistributionGroup
-id "GroupName" | Get-DistributionGroupMembers the member show. But when you are in OWA, go to the All Group's address list, and click on a group it says "There are no items to show in this view".
I made sure that the Set-DistributionGroup -id "Name" -forceupgrade was done (didn't need to, says it doesn't modify anything).
Not sure why the members are not showing up?
Hi,
We can use the following command to check ExchangeVersion for all groups:
Get-DistributionGroup | fl name,ExchangeVersion
Additionally, we can also check an attribute called msExchVersion on ADUC: click View > Advanced Features and check group Properties > Attribute Editor > msExchVersion which the value should be:
Exchange 2007 = “4535486012416″
Exchange 2010\2013 = “44220983382016″
Regards,
Winnie Liang
TechNet Community Support

There are a few tv shows that played this week that are not available on itunes from tnt. Why are they not available for download.

There are a few tv shows that played this week that are not available on itunes from tnt. Why are they not available for download. We watch these each week, and I have checked to be sure that there was actually an episode this week, and there was.

Under other "sync-able" players, there's usually the "Sync only checked items" radio button. Not for the 2.0 Apple TV. There's no option, but acts as though that option ("sync only, etc...") has been selected. Figured it out after an hour of walking back and forth from my Mac to the TV. Argh.
Try it. De-select the shows, sync the AppleTV and look under the "TV Shows" and the one's you've unchecked will not be there.
R,
the wedge

Am I billed for periods where there are no events?

Assume I have a dev/test scenario where there are long periods of time when I'm not actively testing my code. If I have running jobs waiting for input and there are no events, am I billed for that time?

There are two meters for which your Stream Analytics gets billed [1]
(1) Data ingressed by your streaming job
(2) CPU memory used by the running job
http://azure.microsoft.com/en-us/pricing/details/stream-analytics/
So if you are not sending any events you will not be billed for (1) but you will still be billed for (2) since you have a streaming job that is allocated and running.
You will have to STOP your job in order to avoid getting billed at all
Thanks
Zafar Abbas

I used Finder to organise my iMovie events into folders. In iMovie I can see the folders but the software says there are no events present. What can i do?

I used Finder to organise my iMovie events into folders. In iMovie I can see the folders but the software says there are no events in the folders. What can I do to rectify?

Very carefully use Finder to move the Events back to the top level of the Movies/iMovie Events folder. iMovie will not see them if they are nested in Folders.
If they are on an external drive, move them to the iMovie Events folder at the top level of the drive.
However, you can put iMovie projects in folders if you want.
It is best to do all moves and renames in iMovie so you do not destroy the links in your Projects. However, you need to move your events back to where they were in the Finder sonce iMovie cannot see them.

While trying to run it show error message : "The application or DLL C:\Program Files\Mozilla Firefox\sqlite3.dll is not a valid Windows image. Please check this against your installation diskette

Just updated firefox. While trying to run it show error message : "The application or DLL C:\Program Files\Mozilla Firefox\sqlite3.dll is not a valid Windows image. Please check this against your installation diskette." Tried to download and install new firefox, but it alway show that the file is corrupt
== Today ==
== User Agent ==
Mozilla/4.0 (compatible; MSIE 7.0; Windows NT 5.1; .NET CLR 1.1.4322; .NET CLR 2.0.50727; .NET CLR 3.0.4506.2152; .NET CLR 3.5.30729; InfoPath.2)

Do a clean reinstall and download a fresh Firefox copy from http://www.mozilla.com/firefox/all.html and save the file to the desktop.
Uninstall your current Firefox version and remove the Firefox program folder before installing that copy of the Firefox installer.
It is important to delete the Firefox program folder to remove all the files and make sure that there are no problems with files that were leftover after uninstalling.
You can skip the step to create a new profile, that is not necessary for this issue.
See http://kb.mozillazine.org/Standard_diagnostic_-_Firefox#Clean_reinstall

There are still no BW systems connected to the Datasource

Hi All,
We are currently implementing BW retail project and trying to retrieve POS data using IDOCs through PIPE but we are facing a problem when we try to process idoc from POS workbench (/POSDW/MON0).We are sending idocs(WBUPON- POS interface: Upload sales docs (receipts) non-aggregated) using transaction we19 and then when we go to the POS workbench and try to process related idocs choosing supply bw immediately ...etc option after this we are getting the following error with a message class RSQU and message no 10.
<b>There are still no BW systems connected to the Datasource</b> I am working on BW side with datasources such as 2LIS_43_poscas and 2LIS_44_posrec.
Our system is SAP BI 7.0 with support package level 12.Can you please suggest something on this problem
Is there anyone who has experienced this kind of problem.Could you please give a look and share your solutions with me OR can somenone show how to transfer pos data into BW system.
Waiting for rewarding points for good answers.
Thanks in Advance,
Regards,
#Bill J.

Satish ,
Thank you very much for the answer but my r3 system is ecc 5.0 so this note is suitable for it ? What else can you suggest related to this problem ?
Thanks & Regards,
#Bill J.

HT4623 I tried to update my ipad air to IOS 7.1 but it shows error that "The software for the iphone was corrupted during download" How can I fix this problem ?

I tried to update my ipad air from IOS 7.0.4 to 7.1 on iTunes. I clicked download and update, it started to download normally but when download finished iTunes shows error that "The software for the iphone was corrupted during download".
How can I fix this error ?

I had the same problem. In the end I downloaded it manually. Here's the steps assuming you are on a Mac and have an iPad Air (Wifi). If not you can find other restore links here.
In the terminal (it kept failing to download in Safari):
curl http://appldnld.apple.com/iOS7.1/031-4521.20140310.D2Ydl/iPad4,1_7.1_11D167_Rest ore.ipsw >>~/Desktop/iPad4,1_7.1_11D167_Restore.ipsw
Once the file has downloaded, move it to ~/Library/iTunes/iPad Software Updates/
Quit and relaunch iTunes.
Should now work for you.

CreatePDF printer File shows ERROR in the status column and will not upload to my account

When printing to the CreatePDF printer. the file shows ERROR in the status column and will not upload to my account

Adobe retired this Feb 17, 2014.
This app sent content to and got content from the web based services of "CreatPDF" and "PDF Pack".
These are subscription services out in "the cloud". When the app was live you had to be online and signed into your account. The user forum for CreatePDF has a DOC that speaks to the app removal.
Be well...

'There are no events to show' error on the iOS BT ...

Similar Messages

Maybe you are looking for