There is still a purchse order commitment for ORD X for CO_ORDER archiving obj

Dear Experts,
I am facing issue for CO_ORDER archiving object. I am getting error saying like
" there is still a purchase order commitment for ORD 200060" and
"order 200060 still has at least one purchase order that you need to do".
screen shot attached for reference
so Please help me to solve this issue.
Thanks in advance,
Ningappa S M

Hello Manju Sir,
Now that issue setting of deletion indicator is got successful. I mean I set residence time 1 as 0 and I tried to archive and I got successful. but I am facing the issue saying " there is still a purchase order commitment" , "there is a still Purchase requisition assigned to order" and
"still has at least one purchase order that you need to delete" etc for all orders when i set residence time 1 as 39 months (even i tried by setting the residence time 1 as zero i am getting the same error messages) and residence time 2 as 0. for these orders deletion flag itself is not getting set. so please help me for this.
Thanks,
Ningappa

Similar Messages

There is still a purchase order commitment for WBS

Hi All,
We need to close whole project while closing I am getting the attached error.
There is still a purchase order commitment for WBS
Additional Information or Comments: = I have checked and closed all purchases order commitment. But still the project shows the below error .
Edited by: nandhasapfi on Sep 22, 2011 10:52 AM

Hello,
This message is being output correctly as the AuC still has
values against it.
These values must be cleared before you can close the WBS element.
Please do a FUL settlement against the WBS element to clear
these values and then try to set the CLSD status again.
There are two ways to 'clean' the AuC, so that you can deactivate it
and close the wbs element:
1. Post a manual retirement of the AuC to clean it.
2. Create a new AuC and use it for all the differences in the final
settlement.
I hope this helps,
regards
Ray

Error-"There is still a purchase requisition commitment for ORD #########."

Hello All,
I am trying to set deletion flag an internal order using transaction KO02 and am receiving an error "There is still a purchase requisition commitment for ORD #########."
1> What does this mean.
2> How can I solve this problem
Moosa

Hello Moosa,
When you want to close an order, the system checks for dependanting data
to alert you that there are open items that have not been received, etc.
You need to close the purchase orders and requisitions so that the order is no longer "expecting" postings from these dependant objects.
Please consider running the following reports which have been known to correct inconsistencies in commitments:
Report RKANBU01 resets commitments on orders and ranges of orders.
(See note 100409) (Note 125266)
Reports ZKAOIDE0 & ZKAOIDE1 removes commitments which refer to purchase orders and purchase requistions which do not exist.
(See ANote 100409)
Report RKACOR04 corrects mistakes between total and line items in
database tables. (See Note 113423)
I would recommend implementing these programs in a test system first.
You may also want to consider Notes 152571 & 157369 if you are receiving error messages KO447 and/or KO448 when attempting to delete/close the order.
Best Regards,
Gladys xing

Purchase Order Commitment Item

Hi,
Could you please help us to solve this issue
When we trying to business completion of Maintenance Order the system is giving the error message "There is still a Purchase Order commitment for Order".
We have seen there is one Purchase order created from the maintenance order and the invoice is created for this PO. After that user set deletion flag for this Purchase Order and PR also. But still the system is giving the commitment item open error message.

Hi
Use T Code SE38 and execute the program RKANBU01 mentioning the Maintenance Order to which assigned in PR/PO.
If still problem persists, then undo the deletion flag & set final invoice indicator for the PO and then check.It must allow then
Thanks,
Manish
Edited by: Manish Chachra on Aug 22, 2008 8:23 AM
Edited by: Manish Chachra on Aug 22, 2008 8:26 AM

PM - MM order can not be completed due to purchase order commitment

Hi
The error "There is still a purchase order commitment for ORD XXXXX" comes up when I try to complete an order in the transaction IW32. I pressed the cancel button then the information box comes up with the text "Order has status "technically completed"". I checked if there is any open PO assigned to this PM order. Yes there is one which was already GRposted and invoiced in 2006. Final invoice indicator has been set too.
I would appreciate a lot if you can help me regarding how to complete this order? Is it a program error.
Regards,
Esra

Hi Thyagarajan
I checked the operations in the PM-order. There are two external processing operations. One has an aggrement which has the validity end 2005-12-31. I don`t see where to see if the other operation is assigned to a purchasing document. In the menu path, extras, cost reports there is a PO which was already invoiced and GR-posted.
I don`t know where to look for more if there are any open purchasing documents?
Thanks.
Esra

After downloading Maverick, my photobooth images were out of chronological order. I've now downloaded Yosemite and they are still out of order. Is there a fix for this?

After I downloaded Maverick, I noticed that my photobooth images were out of chronological order. I've since downloaded OS X Yosemite (10.10) and they are still out of order. My version of Photobooth is 7.0 (719). Is there a fix for this? Many thanks in advance.

8-doing a factory reset, then repeating steps 1 through 6
Do you mean a restore to factory settings?. If so did you set up as new or restore from back up afterwards?

Commited quantity but there are no open sales orders.

Item show as x quantity committed in inventory data tab in Item Master data. There is no open sales orders for specific item though. Client is on SAP 2007 A SP 00 PL42. Anyone had this before..? Solution?

Hi Jerusha,
Sometimes the stock quantities can go out of sync. Not entirely sure why, upgrading to the latest patch may help preventing it in the future.
In order to fix this you can run the 'Restore Item Balances' for that item.
Go to the Help Menu / Support Desk / Restore / Restore Item Balances.
Enter the Item Number in the From and To box to ensure you only run it for the effected item. Run the routine to recalculate the quantities.
Regards,
Adrian

Send Idoc For Purchse Order

Hi Friends,
I have Configure All the things require to send idoc for purchse order..........when i m creating purchase order from source system
it's getting send to traget system....................
but in target system giving error in idoc.that
VKORG, VTWEG, SPART cannot be determined for customer S004 , vendor 0006000023
i m using message type....ORDERS............
can antbody pls tell me how to maintain VKORG, VTWEG, SPART
in oreders message type.......there no fields in this message type.......i have checked it through se19...............

Hi ,
I have same problem ,
How to send IDOC of Purchase Order to URL of our vendor.
The Idoc is created , but how to send it to the web?
Anyone knows?
Thanks
Edited by: Moshe Stein on Feb 28, 2008 11:08 AM

There was no way to order AppleCare for the iPhone 5 using the online AppleStore to have it activated automatically. Am I missing something?

There was no way to order AppleCare for the iPhone 5 using the online AppleStore to have it activated automatically. Am I missing something?

I must have missed the option to add AppleCare+ to my iPhone 5 pre-order, too. Fortunately, I was able to obtain confirmation from an Apple representative that AppleCare+ can still be added to a new iPhone 5 within 30 days of the device's ship date.
My iPhone 5 Ordering Situation:
Successfully submitted pre-order at 2:05am CST
Realized I did not add AppleCare+
Tried to add it as a separate product
Unable to add AppleCare+ after submiting pre-order
This Morning:
I just got off the phone with an Apple representative. He assured me that, once my iPhone 5 arrives on September 21, I will be able to: 1) call 1-800-MY-APPLE and have AppleCare+ added to my iPhone 5; 2) go into an Apple Retail Store and have AppleCare+ added to my iPhone 5. He said I would have thirty days from my device's ship date (September 21) to add AppleCare+ to it. He also recommended that, if I wanted to have AppleCare+ added at an Apple Retail Store, I should make an appointment as soon as possible. Because I was still concerned something might go wrong, the Apple representative emailed me a copy of my case number to use as a reference in case I have any issues obtaining AppleCare+ on September 21.
Caveats & More Information:
I ordered through the Apple Store app on my iPhone 4
I live in the United States
My carrier is AT&T
I have a case number and repeated assurances from an Apple representative
While your situation may differ from mine I do hope you're able to add AppleCare+ to your iPhone 5 once it arrives, either by calling 1-800-MY-APPLE or by making an appointment at your nearest Apple Retail Store.
Best Wishes,
Dylan

My Order Number 2510885387 and i have ordered for developer account but when i am checking the status it is still saying no order done in last 30 days

my Order Number 2510885387 and i have ordered for developer account but when i am checking the status it is still saying no order done in last 30 days

There's a Contact Us button at the bottom of this article > https://developer.apple.com/support/ios/purchase-and-activation.php

There are still batch split items with quantity X for item

Our current system is ECC6. The deletion of item in the delivery (TO
confirmed) is different before ECC6 (4.6C). In 4.6, unless quantity of
batch split items are zeroed out in the delivery, the item cannot be
deleted. Message "There are still batch split items with quantity X for
item" is encountered. In ECC, line item can be deleted even batch split
items are not 0. The message doesn't exist in ECC6.
Please advise how to activate this message.

In ECC6, the logic has been completely changed during item deletion.
Now, there is no way to activate the message VL224 when deleting batch item.
In 46c,
FORM XLIPS_LOESCHEN_PRUEFEN is called with XL_ERROR = 'X'.
Main program     SAPFV50P
Source code of   FV50PFLP_XLIPS_LOESCHEN_RC
FORM XLIPS_LOESCHEN_RC
           IF IF_TABIX IS INITIAL.
             REFRESH LT_REASONS.
             PERFORM XLIPS_LOESCHEN_PRUEFEN TABLES   LT_REASONS      <<<<<<
                                            USING    LF_POSNR
                                                     CHARX        <<<<<<<
                                                     IF_ALL
                                            CHANGING LF_EXIT.
In ECC6,
The FORM is called with XL_ERROR = SPACE. That's why the error is not issued.
Actually, they are called from different place in ECC and 46c. The logic has been completely changed.
Main Program     SAPMV50A
Source code of   MV50AF0D
FORM DELETE_ITEMS_CHECK
           perform xlips_loeschen_pruefen(sapfv50p) tables   ct_reasons   <<<<<
                                                    using    ls_admin-posnr
                                                             space
                                                             space   <<<<
                                                             'GHK' "n_766525
                                                    changing lf_exit.

Is there really still only one range key for partitions?

Hi All,
I had need to look up the manual on partitioning functions.
The manual reads like there is still only one field available to define as the partition key with left and right for placement.
Am I reading this right? That MSFT have not yet enabled multi field partition columns?
I just want confirmation because I can barely believe it.
https://msdn.microsoft.com/en-us/library/ms187802.aspx
Thanks in advance.
Peter Nolan

Hi peternolan9,
Based on my research, the partition function has to be defined on a single column, it doesn’t support multiple columns.
To work around this issue, we can use computed column option that is a combination of the multiple columns we're trying to partition by. If you don’t care a rare incorrect partition, then we can also use Checksum.
The following similar threads are for your references:
http://stackoverflow.com/questions/4671161/table-partitioning-using-2-columns
https://social.msdn.microsoft.com/Forums/sqlserver/en-US/cf652647-a804-48e9-9d41-9cda0a2aff77/sql-2008-support-for-multiple-column-partitioning?forum=sqldatawarehousing
Thanks,
Katherine Xiong
Katherine Xiong
TechNet Community Support

There is still no update for 5530 pc 0589027

Why there is still no update for my Nokia 5530 with product number 0589027. The v10 firmware makes me sick and after 3 and half month there is still no update? are you working on it or do i have to throw my phone trough closed window...

Updates are phased in around the world, so it is normal that not all phones get the update at the same time. Quoting from
http://europe.nokia.com/support/download-software/device-software-update:
"Please note that the latest firmware version may not be compatible with your device, and the benefits listed may not be available to you."
Depending how many floors up you are at present, throwing the phone at a closed window might cause less damage than throwing it through and open one; but both risk leaving you with with a broken phone and no warranty which would be no use when the update does finally get to you...

HT5787 i forgot Icloud password and security question what method i can use to reset it is ther any or what i am still using iphone but my icloud is disabled for to many atempts what now how to rest the password

i forgot Icloud password and security question what method i can use to reset it is ther any or what i am still using iphone but my icloud is disabled for to many atempts what now how to rest the password

Hi bekimlorini,
Thanks for visiting Apple Support Communities.
You may find this article helpful with resetting your security questions:
Rescue email address and how to reset Apple ID security questions
http://support.apple.com/kb/HT5312
If you're not able to receive email to your rescue email address, you may need to contact iTunes Store Support:
You'll need to contact iTunes Store support to have your questions and answers reset.
All the best,
Jeremy

I am wanting to order about 100 individual iphoto cards, is there anyway of doing one order so i am not charged 1.99 delivery for each individual card??

I am wanting to order about 100 individual iphoto cards, is there anyway of placing one order for all these so i dont get charged £1.99 delivery for each individual card?

Afraid not.
Regards
TD

There is still a purchse order commitment for ORD X for CO_ORDER archiving obj

Similar Messages

Maybe you are looking for