There's any way of knowing what Support Package we had implemented?

Hi!
I need to know if exists a kind of "history" of the system. I mean, a trx that shows you when you implemented X support package and when.
My problem is that I need to implement some oss notes to a z program that is a copy of an standard. The z program was created (copied) some years ago.
I need to know the Support Package that we had at that time because I need to check if the prerequisites applies to the Z version.
I you don't understand what I need, please tell me...
Thanks in advance!
Bet

If you got the <b>SNOTE</b> transaction, you don't need to care about support packages -;)
Just pass the OSS note and the system is going to tell you if it can be implemented -:D
Greetings,
Blag.

Similar Messages

Hi is there any way of knowing what location my find my phone was turned off or last known location thnks

hi is there any way of knowing where my find my phone was turned off or its last location thnks

No. Apple can do nothing. For the future there are apps that will periodically email you the device's location (if connected to internet)

Time machine - any way to know what's new?

I started a Time Machine backup recently and saw that it had 250 GB of new content to back up, which didn't seem right to me, so I stopped the back up and have temporarily disabled TM so I can figure out where the additional files are. Is there any way to see what files/folders Time Machine believes to be newly added or moved? Or, is there a way to see what's been added to a backup once is complete?
This happened after I installed Yosemite on a separate boot drive, and some programs along with it, but I've explicitly told TM to ignore that boot volume. It's possible that in the process I accidentally installed or copied some files to a separate HD which contains files used for both my Mountain Lion and Yosemite volumes, and which IS backed up by TM. (This is a Mac Pro tower, I have 4 drives in there with a few boot volumes and a couple volumes for data.)
Any help would be much appreciated.
2008 Mac Pro
OSX 10.8.5 (and OSX 10.10.2)

See 7 and 8.
Time Machine FAQ

Is there any way to know what projects have budget/cost updates certain day

Hi all,
We want to develop a program running everyday to detect all projects that have budget or cost updates that day. As far as I can see, the following tables might be involved: PROJ, PRPS, RPSCO, AUFK, COSS, COSP, BPJA, BPGE. But among the listed tables, only PROJ and PRPS have the timestamp fields. I'm wondering whenever the budget or cost value is updated, will any one of the 2 tmestamp filelds get updated?
Any hint or help is very much appreciated.
Regards,
Michael

Hi Michael
please check this thread!
Budget with modification time (TIMESTMP)
I guess it should be helpful
Regards
Martina

Does anyone know if there's any way to find out what files in my Library

Does anyone know if there's any way to find out what files in my Library I can delete? I just cleaned off my HD onto a media drive as a back up so all my movies documents and photos are gone but my Library seems to be a huge space hog eating sixty gigs of space and I do have alot of apps but they don't take up a third of that space... Any ideas how I can figure out what is wasting all this space? I had Spring Cleaning once but found it to be rather confusing as to what was essential to the OS and what not...
Thanks,
Matt

Get free OmniDisk Sweeper. I can't imagine how you could have sixty GB in that folder. My entire ~Library isn't even 1GB. Are you sure you're not talking about your entire Home folder?
Can you post a screenshot of the contents of that folder.
Check again. Are you sure you moved all the Movies etc. out? Could have left duplicates of everything behind when you did this.
Message was edited by: WZZZ

Is there any way to know when an app is going to be discontinued?

I purchased an app around eight months ago for $13. I forgot about it until I was reloading apps onto my new IPad. When I went to find it, it was no longer in the app store at all. I contacted the support people who told me that since it was "so long ago" there was no recourse. So does that mean that any time you purchase an app it could disappear at any moment? Is there any way to know in advance that this will happen? Never mind that it stinks to spend that amount of money and then have nothing to look back at.
Additionally, I have had trouble reloading apps that I have paid for as an "in app purchase". What is the deal with that? Is that information not stored like buying an app outright?
Thanks
DTC

Apple constantly reminds folks to backup their content. Apple warns folks all of the times that content may not always be available in the iTunes or Mac App Stores and most folks ignore the warnings or cannot be bothered to read them. No, unless the developer warns you that they are with drawing an app from one of the stores, there is no way to know in advance that an app may no longer be available.
http://support.apple.com/kb/ht4009

Is there any way to know that status of DEFINE variable?

Hi,
I have a list of scripts that is executed to create my baseline database. At the beginning of the script execution, we have a SET DEFINE OFF and at the end we put SET DEFINE ON. During one of the scripts, we deliberately SET DEFINE ON and we forgot to SET DEFINE OFF at the end of the script. Consequently, the following scripts started failing without error notification because they contained '&' in the INSERT query. I have the following queries:
1. Is there any way to know the status of the DEFINE variable at the beginning of the script?
2. Since the oracle gives a user interrupted error, the script execution process does not terminate with error. Instead, it continues executing the next scripts. Is there a general way to capture such errors and terminate the script execution. We already have WHENEVER SQLERROR and WHENEVER OSERROR in our script execution process.
Regards
Kunal

Hi, Kunai,
Welcome to the forum!
953495 wrote:
Hi,
I have a list of scripts that is executed to create my baseline database. At the beginning of the script execution, we have a SET DEFINE OFF and at the end we put SET DEFINE ON. During one of the scripts, we deliberately SET DEFINE ON and we forgot to SET DEFINE OFF at the end of the script. Consequently, the following scripts started failing without error notification because they contained '&' in the INSERT query. I have the following queries:
1. Is there any way to know the status of the DEFINE variable at the beginning of the script?Whether it's at the beginning of a script, later in the script, or not in a script at all, the SQL*Plus command
SHOW DEFINEtells you if DEFINE is ON or OFF.
If DEFINE is ON, it will produce something like:
define "&" (hex 26)If DEFINE is OFF, it will produce
define OFF
2. Since the oracle gives a user interrupted error, the script execution process does not terminate with error. Instead, it continues executing the next scripts. Is there a general way to capture such errors and terminate the script execution. We already have WHENEVER SQLERROR and WHENEVER OSERROR in our script execution process.Do you really need to capture those errors? Why not just prevent them? It sounds like you want to make sure DEFINE is OFF at a certain point. To do that, just say
SET DEFINE OFFRegardless of whether DEFINE was ON or OFF before you issue that command, you can be sure it will be OFF after that.
I hope this answers your question.
If not, post a complete test script (or set of scripts) that people can run to re-create the problem and test their ideas.
Point out where the scripts you post are not doing what you want, and describe, with specific examples, what you want it to do in those places.

When I go to restore my phone; is there any way to pick what you want back on your phone or do you have to get everything backed up?

When I go to restore my phone; is there any way to pick what you want back on your phone or do you have to get everything backed up?

Thank you. I was afraid of that. I backed up from iCloud. I looked at the iTunes one - it had four different ones on there; was hoping I could see because my grandson's phone was redone last year (his mom messed it up then) and didn't know anything was backed up to iTunes. He lost a lot of stuff that time. I'm just trying to get his phone back to par after someone changed his passcode on him as a joke and forgot what they changed it to a few days ago. They should change it so one could go in and pick what they want or don't want. Thank you again for your time. I do appreciate it.

If SIRI works on iphone 4? if there is any way for ask using iphone 4 can have this application? just let ask know if will work or not, because if not so we will not think about it. please somebody answer my question

if SIRI application works on iphone 4? if there is any way for ask using iphone 4 can have this application? just let ask know if will work or not, because if not so we will not think about it. please somebody answer my question. my iphone 4 are already update for iOS 5. I'm searching in the internet forum some are saying that it's only work if your iphone are jelbreak, and the problem is i don't want my iphone to be jelbreak. thanks for reading my question. and please send the question on my email many thanks....
<Email Edited by Host>

What else is there? There's Siri, A5 chip, 8MP camera, intelligent switching between antennas. Those are the only new things in the 4S. Like I said, if Siri was on the 4, fewer would buy the 4S. Second, the 4 is discontinued to make room for the 4S, so there will be no updates exclusively for the 4. Third, I never trust any reports on the Internet unless it comes directly from the company (in this case, Apple).

HT4642 Dear Support team, There are any way to open Microsoft Excel - Office by using CSV format

Dear Support team,
There are any way to open Microsoft Excel - Office by using CSV format
best regards

For the record, this is a user-to-user support forum. You aren't actually addressing Apple.
I'm not clear what you are trying to do, but Numbers will open a CVS file adn will export to CVS (as well as Page, Numbers, and PDF) using the document function (looks like a box with an arrow; upper left). If this isn't what you are looking for, perhaps you could provide a bit more detail.

Is there any way to know that the UI has been updated due to a bind change?

Hi
For the given code snippet
var c=Circle{
centerX:10
centerY:10
fill:Color.YELLOW
onMouseClicked:function(event){
      c.fill=Color.RED;
printNodeAsImage(filename) //to a file
}

Oops..Got posted before I could finish the query
Hi
For the given code snippet
var c=Circle{
centerX:10
centerY:10
fill:Color.YELLOW
onMouseClicked:function(event){
      c.fill=Color.RED;
      printNodeAsImage(c, filename) //to a file
}Let us assume that printNodeAsImage(c,filename) saves the circle node with the current color to a file. See http://rakeshmenonp.wordpress.com/2010/04/26/javafx-1-3-save-as-image/ for a implementation of this function
What we notice instead is that printNodeAsImage(c, filename) actually saves the node with the color YELLOW instead of RED. Is there any way to know deterministically when the UI has been updated due to a variable value change (or because of binding). (In this case the transition from Yellow to Red) So that we can perform other operations on the UI state - like saving it to a file
Regards,
Dhruva Ray

Is there any way to know that SOAP Client has closed and broken connection

Hi,
I am exposing a stateless session EJB using Oracle SOAP Webservices...and it is working smoothly.
But when the SOAP client crashes or is closed, is
there anyway that can know this happened on the server side i.e., the SOAP connection is lost.
Thanks,
Prashant

Oops..Got posted before I could finish the query
Hi
For the given code snippet
var c=Circle{
centerX:10
centerY:10
fill:Color.YELLOW
onMouseClicked:function(event){
      c.fill=Color.RED;
      printNodeAsImage(c, filename) //to a file
}Let us assume that printNodeAsImage(c,filename) saves the circle node with the current color to a file. See http://rakeshmenonp.wordpress.com/2010/04/26/javafx-1-3-save-as-image/ for a implementation of this function
What we notice instead is that printNodeAsImage(c, filename) actually saves the node with the color YELLOW instead of RED. Is there any way to know deterministically when the UI has been updated due to a variable value change (or because of binding). (In this case the transition from Yellow to Red) So that we can perform other operations on the UI state - like saving it to a file
Regards,
Dhruva Ray

Is there any way to know the T-code from the screen?

Hi friemds,
it s a general question. but I found relavant for posting here.
I saw our group friens giving some T-codes for spro functions (eg: SNRO, M/06), bbut how to know the transaction from path. i.e. If I go to condition types screen, there I could not see any transaction. is there any way to know the T-code from the screen?

Hi,
Listed here are the various ways you can find the list of transaction codes and their usage:
Use transaction SE11 - ABAP Dictionary:
Fill in the Database table name and click the Display button.
- TSTC table will contain all the Tcodes and
- TSTCT table will contain all the Tcodes with Texts.
Once you entered the screen, click in Top Menu - Utilities - Table contents - Display
If you want to display all the transaction code (total - 57,048) you have to change the Fields: Maximum number of hits to 99999 (default 500).
or
Simply goto transaction SM01, although this tcode is to Lock/Unlock any transaction code, you can also view all the tcode available in the R/3 system from here.
or
Goto transaction SE93
There are two ways where you can find the list of transaction codes in SE93.
Method 1:
You must be familiar with the starting characters strings for each of the R/3 application modules.
Assuming you know that most Materials Management transaction codes start with MM.
In the Fields: Transaction code, type in MM* and press the function key F4
The list of transaction code starting with MM will be displayed.
Method 2:
On the Top Menu, click Utilities - Find - Execute and the first 500 transaction will be display.
If want to display all the tcodes, make sure you remembered to change the Fields: Maximum no. of hits right at the bottom of the screen.
I know a particular T Code and can enter and work on it. How do I know what is the menu path for that T Code?
Enter Search_SAP_Menu in the command box and when the pop box appears enter, the Tcode and it will give the nodes and menu path.
This is helpful only in case of SAP Menu not in case of SPRO - ie IMG.....
Reward if Helpful,
Regards,
Archit.

Is there any way to know data is read from tape and written to disk

is there any way to know data is read from tape and written to disk

784786 wrote:
Just asked because I am doing restoration, I see files read from tape and then restored, but can't find them physically there.
Is there any way I can find it.What kind of restoration? What kind of files?
The usual "no information" question is of the form "My car won't start. Tell me how to fix it"
Yours is a bit different - "I tried to fix my car. Tell me how to know it's fixed".

Is there any way to know execution time of a c program on Xcode

is there any way to know execution time of a c program on Xcode ?

If it is a command line tool and you just what the total time do as tony wrote,
If you need to run it from Xcode or are looking for more detail you can use the Instruments package. Select Product->Profile then select Time Profiler.

There's any way of knowing what Support Package we had implemented?

Similar Messages

Maybe you are looking for