Think my drive is failing............

I have two internal drives but I think my system drive is failing as my ppc g5 tower is going to the grey restart screen at times. So I want to put a new drive in maybe 1tb. I've never done this before but I guess I will take out my second drive, put in it's place the new drive, Carbon Clone the old system drive onto the new drive and the system will then be on that. Like I say I've never cloned a system so very cautious not to get it wrong......
Any tips please......

I mentioned using a fast boot drive? well, I would not use the original at all except as a new backup and for emergency - something to use to run Disk Warrior.
The Samsung F3 is fast, no doubt about it, and $9/100GB is a "steal." Get two.
But the system boot drive has enough to do on its own and your music and audio really likes to be on their own drives.
Any drive, other than "green" (variable and slower rpm) today is fine. Personally, I'd use just 10K VelociRaptors even if it means adding FirmTek SATA controller and have 4-5 internal drives. The cost more but really, even my 1TB WD Black Caviar is shamed into admitting it isn't as fast or as responsive.
Upgrading your OEM 230, and look at your "B" drive, too while at it, use those as backups.

Similar Messages

  • How to backup data when hard drive is failing.

    I think my hard drive is failing..
    I booted using Install DVD, and got message in Disc Utility that "this drive has a hardware problem that can't be repaired." It mentioned I should backup data and consult apple representative..
    I clicked on Macintosh HD under the red physical drive (500.11 GB Hitachi HTS) and did disc repair.
    Strangely, the message went away on the physical drive when I finished.  It turned back to black wording and gave green "verified/repaired" messages in the log.
    I am still able to boot my macbook, although everything is running slowly... Desktop excel files take 15 mins to open.
    Does this still sound like a failing hard drive?
    I am trying to act fast and borrowed my sister's external harddrive/ "passport for mac", and it slowly prompted a time machine backup. It is slowly working through "8.34GB of 200.33GB"
    I do not really understand what I am doing, but hoping this is the right move. Could someone explain what time machine will do or how it will help?
    Is there any chance I will harm her external hd?
    I am mostly worried about iPhoto and itunes library, iMovie projects,and important excel spreadsheets on my desktop. Is time machine looking after these concerns?
    Any help greatly appreciated.

    Where is you TM backup?
    Where are your external data redundancies?
    Now you will need to use very expensive data recovery experts to recover data when you could have had it safely on a $100 worth of 2 external HD.  
    Mechanical HD failure circumvents using recovery software.......so,  now you backed yourself into a corner and needed expensive data expert recovery.
    You took a wrong turn a long while back before reaching this cliff edge.
    that wrong term was not having (preferably 2) external HD as a redundant data archive.

  • Error message: "Webcam driver open fail" for Satellite L305-S5875

    Problem: Webcam is not working and when Camera Assistant Software is started up, the Error message, "Webcam driver open fail" pops up.
    Computer: Notebook Satellite L305-S5875
    OS: Windows Vista
    In troubleshooting, I have unsuccessfully tried the following: Changed the webcam driver several times, rolled back driver, updated driver, and tried Chicony 2.0 USB driver, and a few other webcam drivers. The webcam initially worked fine, but about a month after installing and using Skype video, the webcam suddenly stopped working and on reboot I got the error message.
    I've stopped Skype and Camera Assistant Software at startup and manually start them, as someone suggested this as a solution. I've uninstalled both and reinstalled several times.  I've tried one software without the other installed... trying every possible arrangement for a solution, to no avail.
    I called Customer Support and John, although very nice and patient, was not helpful.  He said he'd research and call back.  Didn't.
    I've gone to Chicony website to try to find an more current driver than January 07.  When I let Windows install the latest from the web, it installs a Microsoft 2006 driver.  I don't think it's a hardware issue, as it started acting up after Skype installed.  I also tried System Restore, but that didn't work either.
    Suggestions?
    Thanks,
    SteveCo

    Thanks Jerry.  I spent hours going through the links you provided and tried some of the suggestions looking for a solution.  Nothing worked.
    I tried uninstalling Toshiba's Camera Assist software and Skype (Skype initially seemed to be the instigator of the problem), completely removing both from the registry, and removing the webcam with Device Manager.  Then I made sure Vista was up to date, and then installed the latest Toshiba Camera Assist software from the Toshiba download page.  After installation and rebooting, I'm getting the same error message: "Webcam driver open fail."
    The webcam used to work, before we installed Skype and used it a few times.  From the other posts I've read, it does seem to be a common problem... usually after Skype or another webcam-using software is installed and run.
    We have another Toshiba laptop: A215-S4757, that has the same OS and webcam-using programs, and it does not have an issue.  Apparently though , after going through all the links on the European message board, you provided, the L305 model is having a problem.
    Open for suggestions.
    SteveCo

  • Re: Satellite A300 PSAGCA -02Y010 - Error: Webcam driver open failed

    Problem:
    Recieve error every time I try to use Camera Assistance Software for Toshiba: Webcam driver open failed. Please restart camera or computer. Web cam also does not work in Skype. It seems that this is a very common problem with the A300s series, yet there is no clear solution out there.
    Hardware
    Series: A300
    Model: PSAGCA -02Y010
    Software
    Operating System: Windows 7 64-bit
    Camera Assistant Software for Toshiba: 1.7.175.0123
    Details
    I recently did a clean install of Windows 7, updating from Windows Vista. I never used the web cam on Windows Vista, so I can't testify as to whether the web camera was workin correctly or not. However, when I tried to use it with Skype, it did not work. I reinstalled the driver that I backed up before I installed the new operating system, but it did not work. The web cam doesn't show up at all in Device Manager - even when set to display hidden devices. Trying to add new hardware through the control panel fails to detect the web camera at all. I have restarted after every install/repair of the driver.
    Steps Taken
    Reinstalled backuped drivers
    I used third party software (Double Driver) to back up and reinstall the drivers for the web camera after I installed Windows 7. Double Driver claimed there was no device to install the driver for. I manually copied the files into the Camera Assistance folder and overwrote the existing ones. The files I copied were:
    casflr.cat
    oem34.inf
    restore.ini
    UVCFTR_S.SYS
    Reinstalled Drivers from Toshiba Website
    Extensive goolging has only turned up recommendations to uninstall and reinstall drivers. I was unable to find any drivers specifically for windows 7 64-bit, but I did try those for my model of laptop for Windows Vista 64-bit - no luck. I tried installing Camera Assistance Software for Toshiba, which as far as I can tell, includes the driver - it only gives me the error described above.
    I also tried locating a generic Windows 7 driver for the web camera - I was unable to find one.
    Check Registry Value Is Correct
    I have also tried checked the registry value at HKEY_LOCAL_MACHINE/System/ControlSet001/Enum/USB/SN001/ClassUID matches the value in C:\Program Files (x86)\Camera Assistant Software for Toshiba\driver\64bit\casflr.inf as and C:\Program Files (x86)\Camera Assistant Software for Toshiba\driver\32bit\casflr.inf recommended by some article recommend.
    Please, I would really appreciate it if anyone could help me out here. I have exhausted all the options I can think of.
    Likely Solution:
    I encountered a thread post that suggested a loose wire was responsible and that the camera would work when the lid was almost closed. I tried this and the camera suddenly appeared in device manager. However, I still can't get it to work with Camera Assistant Software or Skype.
    Message was edited by: A300Owner

    Hi - I'm a newbie to this forum.
    I have an A300 Satellite Pro - not even 2 years old.
    In the last 2 days I have 2 problems that I think are possibly related.
    1. Like others on here I now cannot get my internal webcam to work. I get the 'webcam driver open failed' message. I have read some forums etc and today I have:
    a) loaded most recent BIOS,
    b) reloaded the webcam software drivers (the most recent seems to be from 2008!)
    c) restarted my laptop about 20 times
    Nothing works
    2. In the last 2 days for the first time I keep getting the 'USB device not recognised' message that annoyingly crops up about every 10 seconds. I am assuming that the webcam is connected to a USB port (internal) and is no longer being recognised. Based on Google advice in various forums I have also:
    1) Turned off the AC power supply
    2.) Taken out the laptop battery and waited 5 mins - this apparently resets the BIOS
    3) tried using device manager in various ways
    Nothing bloody works!!
    Maybe the hardware is damaged but I doubt it - I have not dropped the laptop, I always pack it carefully in a padded rucksack. It has always worked fine until 2 days ago.
    Ashbo (very fed up)

  • My Fantom backup drive is failing. I want to copy the time machine contents to a new backup drive and continue on as if nothing has happened.  Can I do this and if so how?  I have intel iMac running Mountain Lion.  Fantom Drive via Firewire 800.

    My Fantom backup drive is failing and I have to send it in for warranty repair.  Before I do that I want to copy the time machine contents to a new drive and then use it for the backup, continuing on as if nothing had gone wrong with the first drive.  Can I do this?  Is it as simple as duplicating the first drive and replacing it with the second? New drive arrives Tuesday PM and both drives have dual firewire 800 ports.  

    I have used the Disk Utility to verify the contents of the backup drive so I don't think I have any corrupt files.  The drive just takes a minute or so to spin up to speed.  If I turn it off and then back on, it beeps at me for a few seconds and then starts it's slow process of trying to spin.  I think it's a power problem not a data problem.  I have my fingers crossed that it holds on until Tuesday PM when the new drive arrives.  I'm thinking that my two options are to duplicate the bad drive or partition the new drive and put the old backups on one partition and start afresh on the second partition.  Any input?
    And thanks to both of you for the valuable information so far!

  • Trying to fix my ENVY-7227cl where the hard drive is failing

    So my refurbished ENVY-7227cl hard drive is failing after a whopping 4 months and I can barely get it to boot to windows 8 and within minutes it freezes and crashes. I ran the hard drive check on the boot menu and it gave a failure code. I'd like to install a new hard drive as cheaply as possible, but I'm new to this and HP is no help whatsoever.
    What would be my best options as I didn't save the recovery CDs?
    Is it possible to install a second hard drive on my machine and attempt to copy the first hard drive onto the second? I don't really NEED any of the files on the first hard drive, so I could just install the new one but then there's the issue of installing windows without a key. 
     Any help would be greatly appreciated. 
    This question was solved.
    View Solution.

    mrryanconnors wrote:
    Interesting Erico. I think I may go the route of trying to install the second hard drive in the optical drive, copying the files from the bad hard drive if possible and then even swapping the old hard drive with the new and reinstalling the optical drive.  A failing hard drive is a failing hard drive. The data on it is unreliable.
    If I installed a new hard drive in the opitical drive, I could then install a free os like ubuntu via USB stick, and then use a transfer program to attempt to copy the old hard drive onto the new?  No. You can use Ubuntu to attempt to copy important files, but that and testing your notebook's hardware will be the extent of it unless you intend to switch to Ubuntu on the new hard disk.  A failing hard drive is unreliable so a cloning program would produce an unreliable operating system on the new hard disk.
    Or for simplicity, could i install the new hard drive with a free os and then contact windows about verifying my computer and getting a copy of windows 8 from them? A hard drive is not installed by an operatng system. You must physically install the hard disk and conect it to a SATA port.  You will need to use the recovery media that you created to install the operating system to your new hard disk.
    ****Please click on Accept As Solution if a suggestion solves your problem. It helps others facing the same problem to find a solution easily****
    2015 Microsoft MVP - Windows Experience Consumer

  • I used time machine, now my drive has failed and all my files are lost.

    i used time machine, now my drive has failed and all my files are lost. any one know how to get the max osx to see the drive again so i can retrive my files

    kabb30 wrote:
    i used time machine,
    Ok, check
    now my drive has failed
    Which one, the TM drive or the internal boot drive?
    all my files are lost.
    Where? on both drives or just TM or the internal drive?
    any one know how to get the max osx
    yea, if we knew more details of your machine and what you had before and later
    to see the drive again so i can retrive my files
    I don't know what drive failed.
    I'm thinking here your internal drive failed? Was it replaced?
    You have a blank internal drive and a TimeMachine drive and your asking how to reinstall OS X so you can restore from the TimeMachine drive?
    How are you getting here? Another machine or device and what is it?
    We need more details of your situation please.

  • SoundBlaster X-Fi Driver Installation Fails After Moving Soundcard to New Slot

    NSoundBlaster X-Fi Driver Installation Fails After Moving Soundcard to New Slot4 I recently moved my X-Fi Elite Pro soundcard to a different PCI slot to accommodate my new large PCIE graphics card.
    Prior to moving the card, my?original SoundBlaster install went fine without any trouble. When I booted up after relocating the card,?it was not detected at all. So I uninstalled my SoundBlaster driver software and?rebooted the computer?thinking that was necessary to clear any hardware configuration settings from the old install. This made no difference. I then discovered my card was not seated properly and corrected it.
    Next I installed the SoundBlaster driver software. The installation proceeded and finished with a request to restart the computer. Once I did, the computer detects my card and starts the hardware installation wizard asking if I want Windows to search online for driver software. It does not recognize the just installed SoundBlaster driver installation. I have a dual boot setup and this happens in both WinXP Pro and Vista 32 Home Premium.
    What's wrong here?

    Forget it folks...couldn't wait for any suggestions so I just cleaned off my hard dri've and reinstalled everything. Works fine.

  • Optical Drive Has Failed - Can I disable it, what's next?

    My 2 year old Mac Mini's optical drive has failed.
    I had finished importing a CD and went to eject it and all I heard was grinding and the CD would not come out. I tired everything under the sun to get the disk to eject with nothing working, so I took it to my local Apple Care Center.
    Their diagnosis is the optical drive has failed. So now what?
    1. They removed the CD, but my Optical Drive is still grinding and it is driving me crazy (the grinding is not continuous, but happens every 8 seconds to 10 seconds)! What can I do, can I somehow disable the Optical Drive so it won't continue grinding? I have reboot several times and nothing seems to satisfy/stop this grinding Optical Drive!
    2. I guess I am going to have to buy an external Optical Drive (oh joy, more cash), can anyone tell me about life w/o an internal Optical Drive and using an external optical drive? Any suggestions on which model/features I should look for? ...besides one that uses FireWire, which is a must for me.
    3. I have an external hard drive which I use to backup my Mac Mini. Now that I don't have an internal Optical Drive, are there any other safety issues I should be thinking about? How about booting the Mac Mini from a disk when it crashes without an internal Optical Drive?
    I am totally frustrated at this point!
    Cheers, Paul

    Welcome to Apple Discussions!
    With no disk in the optical drive, it should be almost entirely inactive (it would be expected to make some noise initially at bootup, but should not be active after that). It makes me wonder if the disk was removed correctly, or whether the drive is still 'latched' and thus 'thinks' a disk is in place. In this situation, I'd return the unit to the Apple Store and ask them to resolve the problem, since a failed drive should not create these symptoms.
    For external drives, there are a number of good solutions - see http://eshop.macsales.com/shop/firewire/optical-drives/ for some examples, starting at around $72. There should be no issue with using an external, and indeed, you are likely to find that even the cheapest of those listed provide you with rather faster performance with rather less fussiness about media brands. You are right to want a FW drive, for best performance.
    As long as the external optical is connected and powered, and a valid MacOS install disk inserted, there should be no problems booting to it if required - though you may have to hold the Option key down (Alt if you are using a PC keyboard) to get to the boot loader screen, rather than C to boot directly to the optical drive.

  • Satellite A300 - Constant "Webcam Driver Open Fail" Error

    I have searched and searched for solutions to this problem and feel like I have tried everything. Whenever I turn my laptop on or attempt to start my webcam I get the error "Webcam driver open fail. Please restart camera or computer."
    I used to be able to use the webcam with no problems but it just stopped working one day. I've recently reformatted my operating drive to the out-of-the-box state, but it is still showing an error whenever I try to use my webcam. I'm running Windows Vista Home Premium on an A300 Model: PSA-GCA. I have also tried updating the webcam driver (and the latest BIOS update) from Toshiba's support section, but with no luck. I've also tried using the XP webcam driver, but still, no luck.
    Any idea on how to fix this problem?
    Message was edited by: Replicant
    I also forgot to mention that in my Device Manager, I cannot see my Chicony Webcam at all. There is no section for imaging devices present at all.

    Hi
    If you search here in the forum you will find enough threads about this issue but I have founded an interesting thread with a good posting from the user Akuma and mayb its useful for you:
    http://forums.computers.toshiba-europe.com/forums/thread.jspa?messageID=136549
    If it doesnt work I think you need help from an authorized service provider. The technicians can check your notebook and repair it ifs necessary.
    Good luck!

  • Satellite A300-1G5: webcam stopped working - Webcam driver open fail

    Hi
    my laptop specifcation here : ( [A300 - 1G5|http://eu.computers.toshiba-europe.com/innovation/jsp/SUPPORTSECTION/discontinuedProductPage.do?service=EU&com.broadvis ion.session.new=Yes&PRODUCT_ID=1055589] ) for any needed details ..
    The problem simply is, the webcam stopped working for some reason, an error messeage says "Webcam driver open fail. Please restart camera or computer".
    I noticed that whenever I put the computer in sleep mode I was getting on the icon tray a notification says "USB device unrecognized"... I wasnt aware what it was - thought it becasue of the USB mouse being plugged... but I think its related to the camera...
    software is installed but camera is not working and cant enable it .. I did download the latest driver from toshiba site , but still not working ...
    Currently my laptop runs Vista HP SP2 32-bit, Windows defender enabled, Windows Firewall Enabled, Windows UAC enabled, Kaspersky Ani-Virus 2009 Enabled. I only use Windows Live Messenger (which up to date I think , version : 14.0.8089.726) which i used camera with, I quite using face recognition long time ago and rarely use the webcam ... I didnt install or update any drivers and used to have the laptop running perfectly..
    So what happened now ?!

    Hi
    I have had a similar error message and could solve this by disabling the webcam software from startup.
    In msconfig -> Start Up tab I have unchecked the Chicony webcam software.
    This prevents it from automatic loading.
    I dont use MSN but Skype and the Chicony webcam software is always disabled (not executed) if Skype is running.
    Maybe you should try this too.
    Furthermore you could try this:
    Go to device manager, mark the webcam (imaging devices USB video device) and deleted it from the device list.
    Then reboot the notebook and wait until the webcam has been recognized again.
    Then test it.

  • Hard Drive continuously fails after performing clean installs.

    Recently I've been having the issue of my Macbook running incredibly slow, when I reform Disk Utility, I get errors such as "invalid record count" and "invalid node structure. I have never allowed these repairs to finish as I've only read that these errors are rarely fixed by disk utility. So I've erased the hard drive and performed clean installs several times. Each time I start up OSX after an install, it will run smoothly for a period of time (it is never the same), the computer will start to slow down again, to the point where I cannot even operate it, and Disk Utility starts finding the same errors.
    I have run the Apple Hardware Test, and no problems have been found. So I'm at a loss.
    Right now I've just erased the hard drive again, and I'm not going any farther until I see if I can get any help.
    I'm starting to think it's just a lost cause.

    You might give this a try:
    Drive Preparation
    1.  Boot from your OS X Installer Disc. After the installer loads select your language and click on the Continue button.  When the menu bar appears select Disk Utility from the Utilities menu.
    If you are preparing an external or a non-startup drive, then open Disk Utility in your Utilities folder.
    2. After DU loads select your hard drive (this is the entry with the mfgr.'s ID and size) from the left side list. Note the SMART status of the drive in DU's status area.  If it does not say "Verified" then the drive is failing or has failed and will need replacing.  SMART info will not be reported  on external drives. Otherwise, click on the Partition tab in the DU main window.
    3. Under the Volume Scheme heading set the number of partitions from the drop down menu to one. Set the format type to Mac OS Extended (Journaled.) Click on the Options button, set the partition scheme to GUID (for Intel Macs) or APM (for PPC Macs) then click on the OK button. Click on the Partition button and wait until the process has completed.
    4. Select the volume you just created (this is the sub-entry under the drive entry) from the left side list. Click on the Erase tab in the DU main window.
    5. Set the format type to Mac OS Extended (Journaled.) Click on the Options button, check the button for Zero Data and click on OK to return to the Erase window.
    6. Click on the Erase button. The format process can take up to several hours depending upon the drive size.
    However, do not overlook the possibility you have a bad hard drive that needs to be replaced. If the above doesn't prove helpful, then I would consider replacing the hard drive.

  • Re: Satellite P100-160 - Display driver installation failed

    Satellite P100-160, PSPAAE, vista 32 bit,
    Today Aero wasn't working and not available in graphics properties. Installed latest display driver from Toshiba UK site, Intel 15.0.1.1114. This version was actually older than my current driver but I thought that maybe as it was the only one availabel that it must be correct.
    The driver install failed with an error (no details just 'an error has occurred'). Now I have no aero and my display resolution cant be set above 1280x800 - should be 1440x900
    To say I am pisseed would be an understatement. Can anyone help? thanks

    Hey,
    If Aero is not available I dont think its display driver problem
    Anyway, have you removed the old display driver before you installed the new one? Go to device manager > right click on graphic card > uninstall. After reboot the display driver should be uninstalled and you can start with display driver installation.
    If you install drivers make sure you are logged in as Administrator and antivirus/firewall is disabled. Restart once again and you should be able to choose the native screen resolution now.
    Check this!!!

  • Unmounting ASMlib driver filesystems failed

    Hi,
    I have tried to stop ASMlib and unload module oracleasm
    #oracleasm exit
    However I am receiving the error:
    Unmounting ASMlib driver filesystem: failed
    Unable to unmount ASMlib driver filesystem
    I have running ASM instance.
    My main question is:
    I have read that you do not need ASMlib for ASM (it is just an optional support), so why when I want to stop it it is not possible?
    Note: I have tried to do so on the system without ASM instance running - actually no grid, no DB is installed, just ASMlib, and it was ok - I could do exit without any problems (sure, ).
    If someone could give me an explanation what is going on, or what am I missing in ASMlib and ASM instance relationship I appreciate it so much.
    #fuser -m /dev/oracleasm  --> there are many processes using it (e.g. asm_dbw0_+ASM ...), which is all right I just do not understand why it is blocking ASMlib
    xxx:/home/storage # rpm -qa| grep oracl
    oracle-instantclient11.2-sqlplus-11.2.0.4.0-1
    oracleasm-support-2.1.8-1.SLE11
    oracleasmlib-2.0.4-1.SLE11
    oracleasm-kmp-default-2.0.5_3.0.82_0.7-7.39.1
    oracle-instantclient11.2-basic-11.2.0.4.0-1
    oracleasm-2.0.5-7.39.1
    Oracle 11g
    SLE 11 SP3

    Hi Dude,
    Thanks.
    And how it is connected with the ASM instance - I mean ASMlib, why it cannot be unmounted while ASM instance is running?
    I thought that ASMlib is used for device management - labeling, connecting to /dev/oracleasm so it has not 'real' efect on ASM itself. I think it is just preparing devices for AMS so this is why I do not understand why it cannot be umnounted. Like separate process helping to user/admin deal with the devices, not helping ASM itself.
    I am not against ASMlib (I will try udev, but ASMlib is simplifying things - at least for me )  - I saw there are many discussion, it is not my case, just wish to understand clearly.

  • Satellite A300-1FP - Chicony webcam Win 7 64bit - driver open failed

    Greetings
    I recently did a clean install of Windows 7 64 bit on my Toshiba Satellite A300-1FP. I was surprised at how smoothly it went. The only thing that was missing was a Windows 7 driver for the Chicony Webcam. A number of people on these forums have suggested using the Vista 64 bit driver. I tried numerous times to make this work. I deleted the startup entry, deleted and resinstalled the driver from device manager, etc. Everything I have found on these forums I've tried.
    None of it works. I continue to get the error message "Webcam driver open failed. Please restart camera or computer."
    Even with the "camera assistant" the Chicony camera is really awful. Had I know before I bought the machine I would have chosen otherwise. Too late now. Without the assitant you have only the driver that comes with Windows 7 which allows you to use the camera but unless you have Hollywood quality lighting the video is so dark that it is nearly unusable. The "camera assistant" at least had a booster for darker rooms.
    I don't know why Toshiba ever used this camera in the first place.
    There are many people with this same exact problem who are looking for help in the various forums for their system.
    If anyone knows how to handle this I would really appreciate hearing from you. Toshiba, if you're listening, what were you thinking?
    Dave

    Hello
    Just a little question: Have you tried this?
    [Why an error message displayed "Webcam driver open fail. Restart camera or computer"?|http://forums.computers.toshiba-europe.com/forums/ann.jspa?annID=18]
    Furthermore it would be interesting to know if the same happens with factory settings. Can you check this please?
    Greets

Maybe you are looking for