Third party components when distributing own software..

Hi,
If i develop any software by using third party components, i need their *jar files, am i right? So when i want to distribute it do i also need to distribute those jar files?
In addition, i wrote some classes and each time i do not want to include *java source file in every project , i just want to import packaged version and use it like a library (just see methods and functions but not source), to sum up if i write components how can i distribute them without source code?
Thanks...

Onur.Aktas wrote:
If i develop any software by using third party components, i need their *jar files, am i right? So when i want to distribute it do i also need to distribute those jar files?Hello! Yes you have to distribute thos jar, i use to put them into the "lib" folder of my project folder. I think this is the way that most of the IDE's do that but i'm not sure.
>
In addition, i wrote some classes and each time i do not want to include *java source file in every project , i just want to import packaged version and use it like a library (just see methods and functions but not source), to sum up if i write components how can i distribute them without source code?So, if i get you right, what you need is only the .class files and for the documentation you should use javadoc i think.
Take a look here http://java.sun.com/j2se/javadoc/
Hope that helps, good luck!

Similar Messages

  • Third party components

    Hi!
    Is there any 3rd party components (grid,scrollbar,button,toolbar...) for Forms6i/9i?
    Thank You

    Onur.Aktas wrote:
    If i develop any software by using third party components, i need their *jar files, am i right? So when i want to distribute it do i also need to distribute those jar files?Hello! Yes you have to distribute thos jar, i use to put them into the "lib" folder of my project folder. I think this is the way that most of the IDE's do that but i'm not sure.
    >
    In addition, i wrote some classes and each time i do not want to include *java source file in every project , i just want to import packaged version and use it like a library (just see methods and functions but not source), to sum up if i write components how can i distribute them without source code?So, if i get you right, what you need is only the .class files and for the documentation you should use javadoc i think.
    Take a look here http://java.sun.com/j2se/javadoc/
    Hope that helps, good luck!

  • Error message: The preset used by one or more sequences in this project requires third-party components that could not be located. These sequences will be modified to use a custom sequence setting instead. To continue editing using the original preset, qu

    Hello all,
    I can't open a PP project without this error message appearing:
    "The preset used by one or more sequences in this project requires third-party components that could not be located. These sequences will be modified to use a custom sequence setting instead. To continue editing using the original preset, quit the application without saving the project, reinstall any third-party components that are required and reopen the project".
    What I had been doing before this occurred was editing a PP project using ProRes sequences and multi-camera editing. Multi-camera was not working very well and after a few attempts to fix that I gave up and finished the job cutting 3 layers of video instead. AME refused to render the three finished sequences of over 1hr duration so rendered final videos from the PP sequences.
    I tried deleting plists for AME, PP and QT, repairing disc permissions and rebooting but there was no improvement.
    Client is satisfied for now but will want to come back to this job at a later date so decided to uninstall and re-install AME and PP in the hope both would be ready to work properly when needed again. AME works fine in conjunction with a different PP project but now I can't open the PP project in question without the above error message appearing.
    Having searched the net it would seem that the problem may be caused by ProRes but I haven't been able to find a definitive solution for the problem. Does anyone know either:
    1. How to fix this?
    2. If I chose the "modified using a custom sequence setting", can I be sure that my sequences will look the same even if they don't use ProRes? The final deliverable format will be mp4 so as long as the overall look doesn't change then I can  afford a change in the edit codec. It's just that with three sequences over an hour long, I don't want days of work to be ruined.
    Other older PP projects of mine open and work fine.
    Premiere Pro CC 8.2.0
    Media Encoder CC 8.2.0.54
    OSX 10.10.2
    Any help would be greatly appreciated.
    Duncan.

    Adobe web chat come up with a solution.
    Open the PP project.
    Export your sequence or project as a Final Cut Pro XML file.
    Set up a new PP project.
    Import the Final Cut Pro XML file.
    This will get you back up an running.
    Since getting back to editing this project I have found that some things will be lost or change in using XML:
    You will lose position key framing, black video clips, dissolve fx, audio levels, audio dynamic fx, the ability to open a multi camera clip and change the camera view.
    You will keep cut points, crop fx.
    Not perfect but only took a couple of hours to save 3 days work.

  • Anybody have a recommendation on a third party disk utility, performance enhancing software?

    Anybody have a recommendation on a third party disk utility, performance enhancing software?

    What performance are you wanting to enhance on your MacBook Air?
    OSX does its own routine maintenance, usually at night. You can run those scripts during the day using Onyx, Cocktail or similar utilities.
    The best performance procedure is to keep your software updated, repair permissions using Disk Utility, and not fill your hard drive to capacity (keep about 15% free).

  • Integrating third party components in java

    Hi All,
    I have a doubt, as in .net u can add third party components in ur application and use the functionality of that e.g u can add third party datagrid in .net,
    In similar way are there any third party components in java, if yes how do we integrate in our application
    Please reply.
    Thanks,
    Mahesh.

    There are lots and lots of 3rd party components and libraries in Java. All you have to do to use 3rd party components is to add jars to the classpath and write some code which uses the classes.
    Kaj

  • About third party components

    hi,
    where can i find components like tabbedpane , messagepane , menus to include in the pages . As i like to add as third party . It does not avail in standard jsf components yet.

    Hi,
    You could try to see if the components you require are available in MyFaces, OurFaces or Galileo third party components.
    Cheers :-)
    Creator Team

  • How to Launch a downloaded third party app from my own app on the iPad using objective c

      How to Launch a downloaded third party app from my own app on the iPad using objective c

      How to identify whether the third party app has registered URL scheme or not. I also send a request mail to the third party app developers regarding URL scheme, but there is no reply from them.

  • Premiere Pro CS6 saying need 3rd party components when opening CS5.5 project

    I am trying to open my current Premiere Pro CS 5.5 project within Premiere Pro CS6, but am getting the following error message:
    The preset used by one or more sequences requires third party components that could not be located.
    This was a project that was imported from Final Cut Pro 7 originally, but the only 3rd party stuff used in it are Magic Bullet Suite plug ins and I have already installed them all.
    I can't even see if this project has CUDA acceleration anymore, as it is set to Custom Sequence and greyed out.
    Any ideas what I can do?

    Let it create the custom sequence and see how things are.  This might not be a problem.

  • Why do i have a dictionary on a Macbook and do not have it on the iPhone?(I do not wish to purchase a third party app when it is coded in OS/iOS)

    Why do i have a dictionary on a Macbook and do not have it on the iPhone?(I do not wish to purchase a
    third party app when it is coded in OS)

    You do use Siri. Hold the home button until Siri responds and say "Define bottle". Same thing, no?
    Hope that helps

  • Cannot find embedded third-party .class in my own signed .cab

    Hello,
    This is complicated.
    I'm building an applet that operates a piece of hardware on a PC (think Win32-only.) A third-party provider (henceforth referred to as TPP) provides software drivers that will be installed on client machines.
    ORIGINALLY the TPP provided a <client>.dll and a C/C++ SDK. To make the project work, I followed the article http://www.javaworld.com/javaworld/jw-10-1998/jw-10-apptowin32.html.
    I built <homegrown>.DLL using JNI, made a signed <homegrown>.cab, and the applet works just great on IE. However, I have to ditch the entire thing (see below.)
    Now the TPP is providing a Java SDK in a <client>.JAR. The SDK interfaces with a <client_jni>.dll.
    I can expect that the client machine will have <client>.dll and <client_jni>.dll installed in the \winnt\system32 (or whichever %SYSTEMROOT% directory.)
    So, I ditched the <homegrown>.dll, and built a new .cab. Now, to build the .cab, I took the contents of <client>.jar and dumped them into the same directory structure as the one I use to build <homegrown>.cab. Note that <client>.jar is not signed.
    So in other words, if you look at the exception below, I, in fact, do have a directory structure that contains: "com/IridianTech/PIDresult.class" and "com/panasonic/authenticam/LoginApplet.class"
    When I run the applet, it asks me if I want to run the signed applet. I click Yes. The Java Console responds with the following:
    Error loading class: com.IridianTech.PIDresult
    java.lang.NoClassDefFoundError
    java.lang.ClassNotFoundException: com.IridianTech.PIDresult
         at com/ms/vm/loader/URLClassLoader.loadClass (URLClassLoader.java)
         at java/lang/ClassLoader.loadClassInternal (ClassLoader.java)
         at com/panasonic/authenticam/PIDInterface.<init> (PIDInterface.java:12)
         at com/panasonic/authenticam/LoginApplet.init (LoginApplet.java:52)
         at com/ms/applet/AppletPanel.securedCall0 (AppletPanel.java)
         at com/ms/applet/AppletPanel.securedCall (AppletPanel.java)
         at com/ms/applet/AppletPanel.processSentEvent (AppletPanel.java)
         at com/ms/applet/AppletPanel.processSentEvent (AppletPanel.java)
         at com/ms/applet/AppletPanel.run (AppletPanel.java)
         at java/lang/Thread.run (Thread.java)
    I have looked at the contents of <homegrown>.cab with WinZip, and I can see PIDresult.class in the right place.
    HOW I AM TESTING: I have IBM Websphere running directly on my PC.
    TWO QUESTIONS:
    1. Do I need to sign the applet anymore, just to use a pre-installed client_jni.dll? (Probably)
    2. WHAT DO I DO??

    This is some code i'm using:
    <applet code="upload.class" archive="upload.jar" codebase="." width="500" height="200">
    <!--<param name="codebase" value="."> -->
    <param name="cabbase" value="upload.cab">
    <param name="button_text" value="Upload via HTTP">
    <param name="file_varname" value="filename_value"><!-- where is this for? -->
    <param name="upload_url" value="http://10.2.1.133/upload/recieve.php">
    </applet>

  • Integration with Third Party EAM (Enterprise Asset Mgmt) Software

    Dear PM Experts,
    I have roughly listed interfaces between SAP & Third Party software -EAM .Kindly add to it
    Outbound to SAP
    - Producrment Proposal for Spare parts( Sparepart No, Qty, Date needed)
    - Asset Calenders( Workcenter, Downtime Start time, Downtime End time)
    - Preventive Manitenance Orders( Order no, Workcenter, Activities/Duration, Spreparts no, Qty of spare part, Date needed)
    - Breakdown Maintenance Requests( Req no, Date/time Requested,
    - Breakdown maintenace Orders(Order no, Workcenter, Activities/Duration, Spreparts no, Qty of spare part, Date needed)
    - Service Personnel request ( Skill type, Hrs, No of personnel)
    Thank you much in advance,
    Regards,
    Jatin

    Hi,
    Inbound interface to SAP PM:
    1. Running hours update from DCS/ RTDB
    2. Create notification from third party S/W
    Outbound interface from SAP PM:
    1. Equipment synchronization to third party S/W
    2. Maintenance order details
    3. Maintenance order status update
    4. Notification details
    5. Notification status update
    6. Breakdown details
    7. Time confirmation details
    8. MTTR/ MTBF update
    Regards,
    Raj

  • Does Resetting Internet Explorer Maintenance settings from GPO will also remove the proxy set in IE by a third party tool when the GPO refreshes for the first time

    Hi,
    We have two GPO's with IE maintenance (Preference Mode Configured)
    The settings it has are
    1. Automatically detect configuration settings - Set to Enabled.
    2. Automatic Browser configuration - Not configured.
    We do not have proxy value set in IE through this GPO.
    We have proxy set in IE through a third party tool (TPT) which updates the proxy at logon event 5 and 10.
    Does Resetting Internet Explorer Maintenance settings from these GPO's also clear proxy set in IE by third party tool after the first GPO refresh. 
    I am sure the second time when the GP refreshes, the client won't find any IEM settings and hence there is no question of the proxy set in IE by TPT to erase. It is only the first time of the GPO refresh that I am concerned about.
    Can someone please guide as I am planning to do the same in our production and concerned about the downtime caused due to the proxy being removed if at all for the first time.

    It will disable the proxy server option in Internet Options (untick the box), but will still store your proxy details.
    Thanks
    Ryan

  • Enabling Third-party Components in Creator 2

    Probably not for the general Creator user, but for third-party component developers who want to get their components to work in Creator, I just finished a draft that I've posted to http://wiki.java.net/bin/view/Javatools/CustomComponentLibraries. Please let me know if you have any comments or questions. Also, see my blog entry on the subject: http://blogs.sun.com/roller/page/edwingo?entry=enabling_third_party_components_in
    -Edwin
    http://blogs.sun.com/edwingo/

    -

  • How do i use Third Party certificates when setting up Lync 2013

    Hi,
    I'm currently installing a trial of Lync 2013 for my company and it has got to the stage of adding in certificates. My company have no wish to add in a Certificate Authority unless its vital, they have asked if its possible to use a third party certificate
    provider. I have no idea how to go about this and would appreciate any help on where to get a certificates from as well as how to import these into Lync.
    Many thanks
    John 

    Yes it is possible. Thankfully Lync makes it very easy. When you deploy Lync one of the steps in the Lync Deployment Tool is to Request and Assign Certificates.
    It's a wizard that will create the CSR for you and basically include all the required names.
    You will however need UCC certificates for most things  (that support multiple Subject Alternate Names) so it may get a little expensive.
    The CA you choose is really up to you, but GoDaddy do some pretty reasonably priced UCC certificates. Digicert is also another commonly used CA
    If this helped you please click "Vote As Helpful" if it answered your question please click "Mark As Answer" | Blog
    www.lynced.com.au | Twitter
    @imlynced

  • Support for Third Party Apps when they take your money and don't respond

    Does Blackberry App do anything about third party apps that take your money and then don't give you what you paid for or respond?  I paid $4.99 for Jeweled game from getempower, it downloaded and worked a bit, then it said I needed to Register.  When I clicked Register, nothing happened, it just said "checking registriation" forever.  I clicked on the Support Email provided and it returned an error saying "We get too much spam so you can't email us anymore, so please go to our website for support."  So I went to the website www.getempower.com, and got to the Support form and filled it out, and it said "you cannot submit form until you choose the app" but when I tried to choose the app it wouldn't let me.  I can't see anywhere else on the web page to contact them. So I paid for the game but it won't let me get to it.  I looked at the reviews and it looks like several other people have had this same problem.  I guess I thought buying something through App World would be trustworthy - App World, do you stand behind the vendors you allow to sell on your site?

    Hi and Welcome to the Community!
    Firstly, as a user-to-user community, no one here can answer your question with any level of authority whatsoever. This site is not a channel for any formal communications with RIM. All support starts with the carriers, authorized resellers, and authorized service centers, all who can escalate cases into RIM at no charge to the end user...and that is the required path for formal support for issues such as yours (including requests for refund, if you choose to go that route). So, your escalation path is not here, in these forums. 
    But, have you tried removing and resinstalling the app? And/or clearing the AppWorld cache?
    Good luck!
    Occam's Razor nearly always applies when troubleshooting technology issues!
    If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
    Join our BBM Channels
    BSCF General Channel
    PIN: C0001B7B4   Display/Scan Bar Code
    Knowledge Base Updates
    PIN: C0005A9AA   Display/Scan Bar Code

Maybe you are looking for