Third party mod sandboxing...

I am wanting to be able to allow third party mods to be pluged into my game however since i cannot garentee that the mods will not access the local disk or do other bad stuff, is it possible to 'sandbox' the code of the mod?
Basically i would want to allow the mod code the same functionality as would an applet.

It would throw an exception if they attempt to call any method that calls checkPermission(...), (File, Socket, ClassLoader, etc).
I'm not sure why you think I/O should not be sandboxed, but you can check the type of Permssion and if the permission asks to read a file from a certain location then you can decide not to throw an exception. You can basically tailor it to the level of detail required by your application.
There is a lot of potential for Java. For example, if every application was written in Java then for each application you could assign a list of permissions. Then if any application tried to access a protected resource then the user could be made aware of this. This would get rid of the spyware problem and probably some other problems that will continue to cause problems for users.

Similar Messages

Change item category Display mode in sales order (Third Party )

Hi all,
I am creating sales order with reference to sales contract but at the time of sales order we don't have enoff stock to deliver to customer , so we have deiced to Third party sales process
But the problem is while creating a sales order with reference to Sales contract the line item of the sales order in grad Mode ( Not changeable mode )
Can any one guide me how sales order line item should be in active mode so i can change the Item category as a TAS third party item category
Help me regards this
Thanks
Rajesh

Hi all.
Thanks for response
I maintain all configuration, But the problem is while creating Sales Order with reference to Contract
the Sales Order line item in grad Mode i am unable to change item category as TAS
i mean TAN is on Display Mode
and we are using Varient config for that material
Please guide me where i need to Configure so system should allow me change item category in sales order please guide me
Thanks
Rajesh
Edited by: RAJESH KUMAR on Jun 16, 2009 10:23 PM

Third Party X-Fi Mode Switching Softw

I recently ran across an issue which is documented in this thread:
http://forums.creative.com/creativelabs/board/message?board.id=soundblaster&message.id=53809
What I found out raised an interesting possibility: it should fairly easy to make software to switch modes with X-Fi sound cards. The community only needs to work together to make some third party software to get the job done.
When modes are switched for the X-Fi, the following folder is utilized (on XP, at any rate):
C:\Documents and Settings\All Users\Application Data\Creative\Spi\
{00000005-00000000-00000007-000002-00000005-00202}\Modes
The files which are involved are named as such:
CTXFICMu.ini
CTXFICMu.rfx
CTXFIEMu.ini
CTXFIEMu.rfx
CTXFIGMu.ini
CTXFIGMu.rfx
The two 'CTXFICMu' files correspond to Audio Creation Mode, while the 'CTXFIEMu' files match Entertainment Mode and the 'CTXFIGMu' files match Game Mode.
The *.ini files are text files containing mixer information for each mode, and the *.rfx files are binary files. I suspect the *.rfx files may be related to the programmable nature of the audio chip, but I haven't messed around with them too much since it is outside the scope of my abilities.
The CTXFISPI.EXE process is making the reads and writes to these files, which seems to indicate that it does the dirty work when it comes to changing the modes of the card.
If the community can determine how to encourage CTXFISPI.EXE to switch modes (or if Creative decides to be forthcoming with the details), then third party apps can be developed to make the switch easier (tray app menu), faster (no animations), more efficient, and seamless (a scriptable method for changing modes would be great!).
Additionally, it shouldn't be too hard to make software which allows for per user mixer settings with the X-Fi. It is only a matter of switching in a particular user's *.ini and *.rfx files to the Modes directory before CTXFISPI.EXE loads them at log in, and then saving the same files again at log off.
So, I have a request for Creative: would you please release some documentation about how to switch modes programmatically or even from the command line?
I'm also throwing out this challenge to the community: if Creative is unable or unwilling to release the information needed, then let's get under the hood of the X-Fi and decode mode switching ourselves. If someone can expose how mode switching works, then I would be more than happy to whip up an interface for it.
Drailex_Mauder

I have created a quick fix for the lack of mode switching options currently available. I would like to program something more feature rich in C, but for now VBScript is better than nothing. If we don't get a leg up from Creative, it may be a while as I will have to look into reverse engineering the software. This would require learning some new skills on my part.
These scripts work by loading the Creative Audio Console and pushing the appropriate keystrokes to change the mode. It is a dirty way to get the job done, but until more is known about how to change modes through CTXFISPI.EXE these scripts will have to do.
I am releasing these scripts under a BSD licence, which appears at the end of this message. Kinda silly for such small blocks of code, but it's there more to cover my assets with the legal disclaimer than anything else.
Copy each block of code into a separate text file and make sure that the file name ends in a VBS extension. Any up to date 2000 or XP machine should run these scripts no problem. I have placed shortcuts to the scripts in my Quick Launch Toolbar so that I can quickly change modes.
You could also add them to a script which switches to game mode, runs your game, and then switches back to entertainment mode.
VERY IMPORTANT: The Creative Audio Console must not be running when you run one of these scripts, otherwise the script will randomly change your settings.
And once again, if anyone can assist in determining how to coax CTXFISPI.EXE into switching modes, this will take things a long way to creating 3rd party mode switching software which meets the goals of my original post in this thread.
----- Start Of "Entertainment Mode.vbs" -----
Option Explicit
Dim WshShell
Set WshShell = CreateObject("WScript.Shell" )
' Start up the Audio Console
WshShell.CurrentDirectory = "C:\Program Files\Creative\AudioCS"
WshShell.Run("CTAudCS.exe" )
' On slower machines the Sleep value may need to be increased.
WScript.Sleep(500)
' Send the keystrokes to change the mode
WshShell.SendKeys("{TAB}" )
WshShell.SendKeys("{TAB}" )
WshShell.SendKeys("{RIGHT}" )
WshShell.SendKeys("{TAB}" )
WshShell.SendKeys("{TAB}" )
WshShell.SendKeys("{UP}" )
WshShell.SendKeys("{UP}" )
WshShell.SendKeys("{TAB}" )
WshShell.SendKeys("{ENTER}" )
WScript.Quit(0)
----- End Of "Entertainment Mode.vbs" -----
----- Start Of "Game Mode.vbs" -----
Option Explicit
Dim WshShell
Set WshShell = CreateObject("WScript.Shell" )
' Start up the Audio Console
WshShell.CurrentDirectory = "C:\Program Files\Creative\AudioCS"
WshShell.Run("CTAudCS.exe" )
' On slower machines the Sleep value may need to be increased.
WScript.Sleep(500)
' Send the keystrokes to change the mode
WshShell.SendKeys("{TAB}" )
WshShell.SendKeys("{TAB}" )
WshShell.SendKeys("{RIGHT}" )
WshShell.SendKeys("{TAB}" )
WshShell.SendKeys("{TAB}" )
WshShell.SendKeys("{UP}" )
WshShell.SendKeys("{UP}" )
WshShell.SendKeys("{DOWN}" )
WshShell.SendKeys("{TAB}" )
WshShell.SendKeys("{ENTER}" )
WScript.Quit(0)
----- End Of "Game Mode.vbs" -----
----- Start Of "Audio Creation Mode.vbs" -----
Option Explicit
Dim WshShell
Set WshShell = CreateObject("WScript.Shell" )
' Start up the Audio Console
WshShell.CurrentDirectory = "C:\Program Files\Creative\AudioCS"
WshShell.Run("CTAudCS.exe" )
' On slower machines the Sleep value may need to be increased.
WScript.Sleep(500)
' Send the keystrokes to change the mode
WshShell.SendKeys("{TAB}" )
WshShell.SendKeys("{TAB}" )
WshShell.SendKeys("{RIGHT}" )
WshShell.SendKeys("{TAB}" )
WshShell.SendKeys("{TAB}" )
WshShell.SendKeys("{UP}" )
WshShell.SendKeys("{UP}" )
WshShell.SendKeys("{DOWN}" )
WshShell.SendKeys("{DOWN}" )
WshShell.SendKeys("{TAB}" )
WshShell.SendKeys("{ENTER}" )
WScript.Quit(0)
----- End Of "Audio Creation Mode.vbs" -----
* Copyright (c) 2006 Breen Ouellette
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions are met:
* . Redistributions of source code must retain the above copyright notice,
* this list of conditions, and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright notice,
* this list of conditions, and the following disclaimer in the documentation
* and/or other materials provided with the distribution.
* THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR
* IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
* OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
* IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
* NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF
* USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
* ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
* THIS SOFTWARE, EVEN IF IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.Message Edited by Drailex_Mauder on 03-4-20060:35 PM
Message Edited by Drailex_Mauder on 03-4-20060:56 PM

I Have Iphone 4... I had purchased from any store in second hand... and the third party whose this iphone not in contact with me and my phone goes to lose mode.. how can I activate my iphone

I Have Iphone 4...
I had purchased from any store in second hand...
and the third party whose this iphone not in contact with me and my iphone in lose mode..
how can I activate my iphone?????Plz help me...
<Email Edited By Host>

Digant Mevada wrote:
can possible to contact apple server manager tu know my id or anythig do..??
There is nothing you can do except return iPhone & get your money back.
You will not be able to use the iPhone.
Apple will not help you.
-> Find My iPhone Activation Lock: Removing a device from a previous owner’s account

Why am I getting redirected to the MSN homepage (when logging out of hotmail) with third party cookies not enabled? And why are exceptions to cookies being cleared in private browsing mode?

I have the latest version of Firefox, I use Private browsing with Allow cookies but not third party cookies. Recently I have begun to be redirected to the MSN homepage after logging out of hotmail and whenever I add MSN cookies to the exceptions in cookies the list gets deleted. Can anyone tell me why, when blocking third party cookies should prevent that?

Two initial thoughts:
(1) If you look at the cookie names and content in the View Cookies dialog, are they the ordinary scramble of different names and values, or do they look like "opt-out" cookies? Some security software or add-ons may restore opt-out cookies after you clear them.
(2) If you have any extensions that make requests to those sites, it's possible they are bypassing private browsing mode, although I would hope not. Hmmm.
Unfortunately, unlike history where you can see the time that an entry was added, it is difficult to figure out when a cookie was set. But there are many cookie add-ons that might provide insight.
Alternately, you could go directly to the cookies.sqlite database using the SQLite Manager extension. This is on the nerdy side, but manageable.
(1) Install SQLite Manager from: https://addons.mozilla.org/firefox/addon/sqlite-manager/
(2) The extension adds an item to the Tools menu. If you do not normally use the classic menu bar, tap the Alt key to display it temporarily or press Alt+t to pull down the Tools menu.
SQLite Manager may suggest a particular database, particularly on your second and later uses. You can skip that and it will open a new window.
(3) On the toolbar (first screen shot), choose the cookies.sqlite database and click Go. This should display the database entries for all your cookies (second screen shot).
(4) Select the following SQL query text:
SELECT host AS Site, datetime(creationTime/1000000,'unixepoch') AS Created, datetime(expiry,'unixepoch') AS Expires
FROM moz_cookies
ORDER BY creationTime, host
(5) Click the Execute SQL tab, paste the query, then click Run SQL. You should get a list of sites in order by the date their cookies were set (third screen shot).
Are the dates all fresh? If they are older, something may be rolling back your cookie clearing.

Free of charge third party process.

Dear Gurus,
I want to create a sales order with a third party material with zero price, create a PO and invoice the PO with zero value.
Could you please tell me how this can be achieved and what are the necessary settings in config to be changed?
Thank You
Kumar

Hi Kumar,
the third party process is as follows:
1.Customer will order the material from the Company X.
2.Company X will not have stock of the material.
3.Company will raise a PO for the material to the Vendor & asks the Vendor to deliver the material to the customer.
4.Vendor will directly deliver the material to the customer & will send the invoice to the Company X.
5. Company X will then raise a invoice to the Customer wrt on the Sales order.
Create a Sales order with item category TAS, Schedule line category CS(standard).Once the SO is saved, go to the change mode of the SO, go to Schedule lines tab, & note down the PR number.
With reference to the PR, create the PO & then MIGO and MIRO.
Then create the invoice wrt the SO.
Let me know if you hav any problems.
Regards,
MP

Error on load: System.IO.IOException: The process cannot access the file : error in event viewer when users want to view documents from this third party deployed scan solution

Error on load: System.IO.IOException: The process cannot access the file
'\\server1\SCANSHARED\.pdf' because it is being used by another process.
   at System.IO.__Error.WinIOError(Int32 errorCode, String maybeFullPath)
   at System.IO.FileStream.Init(String path, FileMode mode, FileAccess access, Int32 rights, Boolean useRights, FileShare share, Int32 bufferSize, FileOptions options, SECURITY_ATTRIBUTES secAttrs, String msgPath, Boolean bFromProxy)
   at System.IO.FileStream..ctor(String path, FileMode mode, FileAccess access, FileShare share, Int32 bufferSize, FileOptions options, String msgPath, Boolean bFromProxy)
   at System.IO.FileStream..ctor(String path, FileMode mode, FileAccess access, FileShare share)
   at System.IO.File.WriteAllBytes(String path, Byte[] bytes)
   at abc.Scan.Layouts.ICC.Scan.View.Page_Load(Object sender, EventArgs e)
I faced this error in event viewer when users want to view documents from this third party deployed scan solution
here I have two WFS servers and they configured with load balancing in F5 .
when I enable both servers in F5 I receive this error messages in 2nd server,
when users want to view documents
adil

Do you have antiVirus installed on the sharepoint servers?
These folders may have to be excluded from antivirus scanning when you use file-level antivirus software in SharePoint. If these folders are not excluded, you may see unexpected behavior. For example, you may receive "access denied" error messages when files
are uploaded.
Please follow this KB and exclude the folders from Scanning.
http://support.microsoft.com/kb/952167
Please remember to mark your question as answered &Vote helpful,if this solves/helps your problem. ****************************************************************************************** Thanks -WS MCITP(SharePoint 2010, 2013) Blog: http://wscheema.com/blog

Credit check issue in third party order

Dear all,
We are facing some issues related to credit management data for one of our customer. I need your valuable inputs for below mentioned queries-
1. As a genaral question- When we releases a SO through VKM* How the system calculated the " Released Credit Value of the document".
2- For one of the customers, the FD33 shows a Sales value X USD. As i see the split of this sales value , this X USD amounts to OPEN DELIVERIES. Both Open So and Open billing are zero. We tried to check with no. of tcodes to find out the open values but no such Open delv document is appeared.
In VC/2, it only shows Open SO, no open deliveries are there.
So i tried with simulation program RVKRED88, and found 5 third party Sales documents , against which some value is coming under the Open delivery value and it sums up to the value as coming in FD33.
I have a few questions on this-
> All the SO in output are Third party SO, against which PO has been created, ( Third party So> PR> PO> MIRO--> billing) and all are in status OPEN, so how come they are showing value in OPEN DELIVERY ?
--> The value appearing against these third party SO is Not equal to items value/net value, it is a complete different value than appearing in SO. But in SO changes history , the same value is coming AS RELEASED CREDIT VALUE. How is it being calculated?
For eg- for one of the Third party SO , the value coming in RVKRED88 is 29573.53 USD,
                                                            net value in So= 24,120.00 USD, Qty = 6000 PC , Credit price= 4.02 USD
                                                            Credit value of So in VBAk= 29573.53 USD
                                                           SO created , released on 08.July.2011, confirmed schedule line =08.Oct.2011
Credit settings- Static check + Credit active Item cat and SO , Open So and open delv are ticked in credit settings.
Kindly help in the analysis.
many thanks in advance for the inputs.

Hi Dharmendra,
1. When we release a sales order using VKM* transaction S066 information structure and OEIKW field is updated which increases open order value.
2. If there is mismatch in the values of credit related fields run RVKRED77 (Re-organisation of credit in case of update errors) this will update all the credit data for a Payer customer in real time. RVKRED88 is simulation mode.
3. Updating of values related to credit is controlled by the update group assigned to credit control area. If system is not able to update using the assigned update group it will automatically try updating using the next update group. Below is the text of SAP Help.
If a document cannot be processed with the update group you specify, the system determines the next possible update it can carry out. For example, you select Update group 000012 which, at delivery, reduces the open order value and increases the open delivery value. Assume that one item in the order is not relevant for delivery. In this case, the system automatically determines Update group 000018 for this item. Update group 000018 increases the open delivery value for the order item. The system uses the confirmed quantity of delivery-relevant schedule lines to update the order value
As you know in OVA8 transaction credit control area, Risk category, credit group and currency are assigned to update group.

How to send job postings to multiple third party sites using the XML output

Dear Friends,
We are Implementing Irecruitment for our client, Client requirement is how can we send job postings to multiple third party sites using the XML output from i-Recruitment
With regards
Surya
.

Can you be more specific about your Requirement. In General, Please navigate to iRecruitment Recruiter Responisbility.
Then Select, Setup > Recruiting Sites. Here, you can configure your Third Party Websites information and attach stylesheets. The default mode oracle sends the vacancy information is HR-XML Format.
If you would like to select more sites information select "Add Another Row".
Then, you can see this information while "New Vacancy Creation Process".
iRecruiter.
Edited by: iRecruiter on Oct 18, 2009 7:43 AM

How to extend a wifi network of third party router with TC 4th generation?

After searching the communities for a while, I did not find a definitive answer on the following question:
- I recently bought a 4th generation Time Capsule 2TB (MD0322/A), that I also want to use as an extension for our existing wifi network.
- This wifi network is maintained by a Sitecom Wireless 300N XR Gigabit Router. Router is set to work over 2.4 GHz (B+G+N) because of several non-N-wifi devices in the network. The channel in use is currently 11.
- This router provides so called WDS functionality, i.e. the ability for other wifi access points to act as a seamless extension of the basic wifi network (using the same SSID).
- The security settings in the router are WPA2 Mixed, with a password in plain ASCII.
- There seems to be no way to set different security levels for WDS-connections versus normal AP (access point) connections. If WDS is enabled, the security settings of the AP-mode are extended to the WDS connection.
I have set the Sitecom router to enable WDS, and added the MAC-address of the TC in the configuration of this router.
When configuring the Time Capsule, with Airport Utility 5.5.3, I can select the option to use TC to extend an existing network, and I can select the network of choice using the WPA personal or WPA/WPA personal security. However, the TC does not succeed in extending the network, and reports this back. If I manually configure the TC and select the network of choice, Airport Utility reports back that the selected network cannot be extended.
I have read several times in other posts that Time Capsule can only connect to third party routers via WDS using WEP-authentication, but these posts were quite old. I was wondering if this is still the case, or that Apple has updated this functionality in newer versions of TC, and thus there could exist a trick to connect to a WDS using WPA.
I really would appreciate suggestions
Bram Bos

gilles13 wrote:
I have a mac and pc (win7) both are connected thru a network with wifi and allready two access pt.
Airport can not be used to extend a WiFi created by a non-Apple box.
You need to turn off the radio in the router (shut down the existing WiFi). Purchase TWO Airport Express units. Connect one to the router with an Ethernet cable. Configure that one as your primary WiFi network and then use the second Express as the extender.
You need to locate the second Express where it receives a decent WiFi signal. Too far away and it has nothing to extend. Too close and it doesn't buy you anything. Before you plug in the second Express, check to see where the primary WiFi disappears completely. My personal WAG is that you want to locate the second Express 2/3 the distance to that point.
If you use Airport Utility to configure the units, it's a snap. In fact, if you configure the primary first and the extender second, AU will default to exactly the settings that you want.
By the way, I refereed to the Express because it's less expensive than the Extreme and you didn't indicate any need for the Extreme features.

Is there a way to have MSOffice-Mac on my MacBook Air sync wirelessly (and non-manually) with iWork on my iPhone without a third-party app?

I purchased a MacBook Air after hearing that it can sync wirelessly with all iOS devices. I then purchased the iWork office for my college courses and found out that the school requires online students like me to use Microsoft Office for Mac. An Apple phone rep explained that this software syncs in read-only mode with the iPhone. Is there really no way - besides third party software like Dropbox, Windows Live SkyDrive, or Docs To Go - for me to sync my homework between iWork on my iPhone and MS Office my new MacBook?

Go through this article: How to back up your data and set up as a new device or do this:
Disable autosync in iTunes, connect your phone to your new computer and right click on it in the device list and choose backup. iTunes will backup your phone without syncing.
Transfer your purchases the same way, choosing "transfer purchases" this time.
When you connect your phone for the first time, all media content will be erased. But you can restore your settings and app data from your manual backup afterwards.
Don't forget to set up at least one contact and event on your new computer to be able to merge calendars and contacts when you sync the phone for the first time.
About backups and what's saved:http://support.apple.com/kb/HT1766
How to back up and restore:http://support.apple.com/kb/HT1414
How to download apps for free again:http://support.apple.com/kb/HT2519

Adobe After Effects CS4 Third Party Content only installed on one of two computers

Hello,
I installed Adobe Creative Suite CS4 MC on two systems. One system lists "Adobe After Effects CS4 Third Party Content" in Add/Remove Programs. This left me a bit baffled as to what this content is and why it only installed on one machine (i.e., assuming I did not erroneously selected or deselected it during the default install). I thought it would be reasonable to install the missing content on the second machine but I cannot find an installer listing "Adobe After Effects CS4 Third Party Content" in the CS4 default or custom installer.
Could someone please tell me what this content is used for and how I can install it on the second machine?
Thank you...

> It should by no means be shown separately in the install database
That's not true for one case.
If you install After Effects in trial mode, the third party content won't be installed. But it leaves the third party content installer on your machine so that when you add a serial number the plug-ins can be added. This causes a new installer to run, so it will be registered (and need to be uninstalled) separately from the main installer.
Frederick- Verify that both machines have the third party plug-ins that Mylenium listed. If it's not on the second machine you probably have it in trial mode and need to serialize. (If not, try uninstalling and reinstalling After Effects from the Master Collection package.)

Third party GR

Dear all
When i enter GR for third party order the system displays PO 45XXXXX- has no items.
But PO exists. there is no confirmation control.
What may be the problem?
Coul you pls share your knowledge?
Regards
Krupa

Dear sai
Thanks for the help. I set the GR indicator in PO.
But i receive another error that 'PO belongs to different Business Area' while posting GR. And this G/L acc., business area and profit center values are in display mode..
Please suggest.!
Regards
Krupa

Unable to enter SC vendor as Delivery address in Third party procurement

Hi all,
Im creating a Third party Purchase order against sales order i.e. Account assignemnt cat as E and Item cat as S.
But my delivery address is my subcontractor. In item details Delivery Address tab if I enter the Vendor number and Put a tick mark on SC vendor, when I do GR against this order Stock will will be posted to Subcontracting vendor stock.
But in Third party PO tht tick mark is in display mode.
If I create Purchase Order without account assignment and Item cat Im able to select the SC vendor field.
I checked the screen lay out Account assignment E tht field is optional entry.
regards
Durga Ram
can any one tell me wht configs I missed ?

Hi
do this.
First enter your vendor,PO,PG,CC and then dont directly enter item category and account assgt category.
first enter material,qty,price ,plant etc.
then go to item detail screen for del. addresss and enter vendor and tick SC.
after that enter item category and acct assgt category.
reward if it helps
rb

WIndows 8.1 64bit, Windows Installers stalls with any install, updates or third party programs.

WIndows 8.1 64bit, Windows Installers stalls with any install, updates or third party programs. Third party program installations work if I restart in safe mode. Updates don't as they cannot be installed in safe mode and require normal mode.
Been happening for months now. Some installations after a long time finally proceed, others dont.
Already trying uninstalling antivirus (Bitdefender) with no result.
Thanks

Hi，
Could you check this issue under clean boot?
Also try this fix tool it repair corrupted registry keys.
https://support.microsoft.com/en-us/mats/program_install_and_uninstall
Regards,
D. Wu
Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact [email protected]

Third party mod sandboxing...

Similar Messages

Maybe you are looking for