Third party prod in R3 system needed?

Hi Friends,
I have to do Communication between R/3 and Third party Legacy system. I will create the technical system for R/3 by executing RZ70 transaction which will create Technical system in SLD of XI.
While creating the Third party system first I need to create the product. Suppose I create product by Name "PR_TEST"., then I create Third party technical system and assign the Product to this System.
   I have doubt do I need to assign the same product to R/3 technical system also.
Please revert back if u have any queries on my question.
Thanks
Prem

Hi,
>>I have doubt do I need to assign the same product to R/3 technical system also.
No Need,
You have to Assign the PRD While creating the  the third party TS only.
In case of R/3 TS Creation, we have the standard SWCV & PRD's inbuilt itself
No need to create them.
& the Product(third-party) which u have created is use for only third Party TS Creation.
Regards
Seshagiri

Similar Messages

  • Is there any dependency between third-party adapter and XI system service?

    Hi Friends,
    I'm developing a thrid-party JCA adapter(deployed under sap.com) on SAP XI? In the adapter, it will use "ModuleProcessor" EJB system service.
    I found sometimes if the JCA adapter cannot be started correctly, the other system service also not started. And checking the log, I found the reason the JCA adapter not started, is because the "ModuleProcessor" EJB system service is not started.
    so just want to know is there any dependency between third-party adapter and XI system service?
    Thanks & Regards,
    Jason

    Hi soo.richard,
    You say it could be intruders cutting in - same problem/solution as for any network I think. Access can be password protected or access limited via MAC address filtering. I'm not sure how Apple Tv works with a hidden SSID but that would be another option.
    Airplay itself can be password protected through the airplay settings.
    I'm not sure if Apple TV works with other authentication such as a password but maybe the manual will assist with this?
    Hope this helps.

  • Third party in my problem system launch daemons

    I read in another post that if I had third party links in my problem system launch daemons section, then I had a problem.  I have ftp-proxy.plist listed under that section.  This is my etrecheck report.
    Hardware Information:
              iMac (27-inch, Mid 2011)
              iMac - model: iMac12,2
              1 2.7 GHz Intel Core i5 CPU: 4 cores
              4 GB RAM
    Video Information:
              AMD Radeon HD 6770M - VRAM: 512 MB
    System Software:
              Mac OS X 10.7.5 (11G63) - Uptime: 2 days 1:48:13
    Disk Information:
              ST31000528AS disk0 : (1 TB)
                        disk0s1 (disk0s1) <not mounted>: 209.7 MB
                        Macintosh HD (disk0s2) /: 999.35 GB (459.17 GB free)
                        Recovery HD (disk0s3) <not mounted>: 650 MB
              OPTIARC DVD RW AD-5680H 
    USB Information:
              Apple Inc. BRCM2046 Hub
                        Apple Inc. Bluetooth USB Host Controller
              Apple Inc. FaceTime HD Camera (Built-in)
              Apple Internal Memory Card Reader
              Apple Computer, Inc. IR Receiver
    FireWire Information:
    Thunderbolt Information:
              Apple, Inc. iMac
    Kernel Extensions:
    Startup Items:
              ChmodBPF: Path: /Library/StartupItems/ChmodBPF
    Problem System Launch Daemons:
              [System] ftp-proxy.plist 3rd-Party support link
    Problem System Launch Agents:
    Launch Daemons:
              [System] com.adobe.fpsaud.plist 3rd-Party support link
              [System] com.carbonite.launchd.carbonitedaemon.plist 3rd-Party support link
              [System] com.microsoft.office.licensing.helper.plist 3rd-Party support link
              [System] com.oracle.java.Helper-Tool.plist 3rd-Party support link
    Launch Agents:
              [System] com.carbonite.launchd.carbonitealerts.plist 3rd-Party support link
              [System] com.carbonite.launchd.carbonitestatus.plist 3rd-Party support link
              [System] com.oracle.java.Java-Updater.plist 3rd-Party support link
    User Launch Agents:
              [not loaded] com.apple.CSConfigDotMacCert-[...]@me.com-SharedServices.Agent.plist
              [not loaded] com.google.keystone.agent.plist 3rd-Party support link
              [not loaded] com.spotify.webhelper.plist 3rd-Party support link
    User Login Items:
              iTunesHelper
              Dropbox
              Spotify
              NETGEARGenie
    Internet Plug-ins:
              JavaAppletPlugin: Version: Java 7 Update 51 3rd-Party support link
              FlashPlayer-10.6: Version: 12.0.0.44 - SDK 10.6 3rd-Party support link
              QuickTime Plugin: Version: 7.7.1
              Flash Player: Version: 12.0.0.44 - SDK 10.6 3rd-Party support link
              SharePointBrowserPlugin: Version: 14.3.9 - SDK 10.6 3rd-Party support link
              GarminGpsControl: Version: 4.0.4.0 Release - SDK 10.6 3rd-Party support link
              iPhotoPhotocast: Version: 7.0 - SDK 10.8
    Audio Plug-ins:
              iSightAudio: Version: 7.7.1 - SDK 10.7
    User Internet Plug-ins:
              CitrixOnlineWebDeploymentPlugin: Version: 1.0.105 3rd-Party support link
    3rd Party Preference Panes:
              Carbonite  3rd-Party support link
              Flash Player  3rd-Party support link
              Java  3rd-Party support link
    Bad Fonts:
              None
    Old Applications:
              None
    Time Machine:
              Time Machine not configured!
    Top Processes by CPU:
                   1%          WindowServer
                   1%          EtreCheck
                   1%          NETGEARGenie
                   1%          Finder
                   1%          NETGEARGenieDaemon
    Top Processes by Memory:
              254 MB          WebProcess
              225 MB          Safari
              197 MB          Deskjet_3050A_J611_series__144729_
              147 MB          PhotoStreamAgent
              139 MB          mds
    Virtual Memory Information:
              348 MB          Free RAM
              1.87 GB          Active RAM
              586 MB          Inactive RAM
              1.21 GB          Wired RAM
              2.56 GB          Page-ins
              1.59 GB          Page-outs
    Any Input?  Thanks.

    Symptom:  You have a very large number of pageouts for having been up for only 2 days since your last boot.  that averages out to 2 pageouts per minute, and since you most likely are not using your Mac 24/7, you most likely had some very high pageout rates while you were using your Mac.
    A high pageout rate generally results in slow performance.
    Why you have a high pageout rate is unknown, but you should look for memory hungry apps.  Activity Monitor can help there.
    Carbonite can add to your disk contention if it is doing backups while you are using your system.  If it is doing backup during the middle of the night while you are sleeping, that is not an issue.
    You could consider either running fewer memory hungry apps concurrently, or adding more RAM to your system (Crucial.com and MacSales.com are highly respected RAM vendors by this and other Mac related forums).
    If you suspect 3rd party additions affecting your performance, you could boot in "Safe Mode" which will not load 3rd party stuff during boot and login.  Boot holding the "Shift" key to enter Safe Mode.
    You could also run 'sar -g' to monitor your pageout activity over time both in "Safe Mode" and booted normally
    Applications -> Utilities -> Terminal
    sar -g 60 100
    which will report your pageouts once a minute for 100 minutes (adjust the numbers to suit your tastes).  Now use your system as you normally would, and go back and review the sar output when you notice you are experiencing performance issues.  What you really want to see is mostly zeros, with an occasional blip of a few pageouts.  Sustained pageouts or huge runs of high pageout numbers is an indication that you are using more RAM than you have available and should look for why, and if the app you are running really does need lots of RAM, then think about buying more.

  • Third party dropshipment process and system setup

    Hi gentlemen,
    I have a few question to check with you.
    1 - What is the difference between Third Party Shipment, and Third Party Drop Shipment in term of process?
    2 - What is the system setup requirement for Third Party Drop shipment (I know TAS is require for 3rd party, but what about 3rd party drop shipment)?
    thanks
    tuff

    Hi Tuffy,
    I did'nt quite get the context of what you mean by third party in this case. Is it a third party delivery which uses TAS item cat on the sales order.
    Or we have scenarios where order is done by for example my company but there is an external ware house which receives my dleivery number probably through EDI who does the shipment and confirms back to SAP to trigger PGI.
    Drop shipment in general business terms is used reduce the cost of inventory stocking. Like I just take orders and book it to a company, they do the shipment to the address I mention ( this goes as part of ship to party address ). Since the company does not from who all I can book orders they just maintain a drop ship customer.
    You might find the below blog useful:
    [One Time Ship To Party|/people/sadhu.kishore2/blog/2008/12/12/working-with-one-time-ship-to-party]
    Regards
    Sadhu Kishore

  • How SAP handles AFS Third Party Orders in ECC system?

    Hi All,
    There is a user exit EXIT_SAPLJ3AM_003 which exist in 4.6C version of SAP for AFS.
    This user exit is for Third Party order processes. This is called within the include LJ3AMFD1 of the main program SAPLJ3AM.
    But this User exit is missing in ECC version of SAP for AFS.
    Basically when the Dierct ship Sales Order is created, corresponding PR is created for it and using this User exit certain fields in this corresponding Purchase Requisition is filled from Sales Order but this user exit is missing in ECC system.
    Could anyone please let me know how SAP handles the Third party Orders in ECC AFS system?
    Thanks,
    Ameesha

    Hi Ameesha,
    Did u find out any solution for it? bcoz, am also hving the same issue!!
    thanq

  • Use of Third Party while creating Technical System

    When I am creating new technical system it asks to enter the technical system type. I want to when to use Third Party. Can u all throw some light on Third Party.......??

    hi
    refer this help on thirdparty system
    http://help.sap.com/saphelp_nw04/helpdata/en/fa/0aad3efa11b300e10000000a114084/content.htm
    http://help.sap.com/saphelp_nw2004s/helpdata/en/24/8fa93e08503614e10000000a114084/frameset.htm

  • How to remove a third party item added to System Preferences

    I downloaded and installed a third party program which placed and icon for it on System Preferences.  I would like to remove the program from my MBPro and remove the icon for it from System Preferences.
    I would appreciate your help and suggestions to do it.
    Thank you for your help.
    Vernon Snider

    Yes, Yes, Yes.  I know that Launchpad is part of Mac OS X.  It is my error in describing by problem which is now resolved!:
    I installed a program called "Launchpad-Control" to more easily arrange and/or delete icons/apps.  In doing so, the installation placed an icon in System Preferences under "Other" which replicated the Launchpad icon of Mac OS X. That icon then loaded its program "Launchpad - Control" which is what I wanted removed.  I used MacGunt's reply and removed the icon for "Launchpad - Control" and it also moved Launchpad - Control to trash.  After restarting my MBPro, everything was/is back to normal!
    Thanks to all who replied and my apologgy for taking your time and trouble.
    Vernon Snider

  • Integration of SAP Cloud for Customer with third party / legacy / non-sap system using SAP Netweaver PI

    Hello,
    has anyone experience with the Integration of a 3rd Party System with SAP C4C using SAP Netweaver Process Integration?
    Is this a process of days, weeks or months?
    Any documentation on this?
    I am thankful for every Input!
    BR, Roman

    Roman,
    Please read through the integration guides available on the SAP service marketplace as they address this specific topic in great detail.
    http://service.sap.com/cloud4customer
    The time duration of the project depends on the business process complexity being resolved and the level of integration desired between the different enterprise solutions in the landscape.
    Thank you.

  • How do you remove a third party item from the system preference

    I am running Mt Lion 10.8.5 and need to remove the Norton Antivirus that is in the system preference. 
    What is the trick on getting it out of there?

    Hi,
    Read All on this one.
    The Disk or the Installer .dmg that you got for this should have an Uninstaller included.
    On a  Disk it may be a separate item.
    However sometimes it is an option choice during the Install screens.
    The web site for the app should also have instructions (in rare cases the Uninstaller is on the web site)
    Common "all user"  add-on Preferences Pane are stored in Had Drive Name/Library/PreferencesPanes
    The ones that come in the OS are in Hard Drive Name/System/Library/PreferencePanes
    Note the Path Bar displayed across both pics.  (Finder > View Menu > Show Path Bar).
    You also have a User Folder version Hard Drive Name/Users/(your account name)/Library/PreferencePanes (~/Library/PreferencePanes)
    You have to use the Finder > Go Menu > Go to Folder and type (Copy from here and Paste there) in the Dialogue box that appears  (use the ~/Library/PreferencePanes option)
    There is a good chance this one is empty.
    Broadly speaking though the more complicated the processes behind a Preference Pane or app the easier and better it is to remove it with the correct Uninstaller.
    Norton is Invasive !!
    USE THE UNINSTALLER Method
    9:43 pm      Friday; January 31, 2014
      iMac 2.5Ghz 5i 2011 (Mavericks 10.9)
     G4/1GhzDual MDD (Leopard 10.5.8)
     MacBookPro 2Gb (Snow Leopard 10.6.8)
     Mac OS X (10.6.8),
     Couple of iPhones and an iPad

  • How to use same credentials in third party web page/app/system as in Office 365 and Share Point?

    I want my users to be able to login with same username/password in my reporting system as in they use for their email, office 365 and share point.
    Since the web is in PHP i found some ideas that use CURL to get the cookie but i['m wondering if there is another way to do that?
    All API show cases and docs that i looked are so confusing that i can't even figure out if it is possible at all and how. It would be great to be able to reset passwords through my system and also to create new users. So that i have all centralized in one
    place.

    Hi,
    Here is an article which describes how to create and configure a single tenant PHP application that uses the single sign-on capabilities of Azure Active Directory.
    http://azure.microsoft.com/en-us/documentation/articles/active-directory-php-web-single-sign-on/
    A sample that shows how to use Azure Active Directory and single sign-on for PHP web sites is available at
    https://github.com/WindowsAzure/azure-sdk-for-php-samples/tree/master/WAAD.WebSSO.PHP 
    Regards,
    Rebecca Tu
    TechNet Community Support

  • Third party Swing components and ADF need tips

    Need some tips how to
    1 - create databindings for them
    2 - automatically bind component when drag&drop from component palette
    Message was edited by:
    matal

    Matal,
    we don't yet have documentation for creating custom Swing bindings to ADF. Automating the binding with drag and drop would be the logical follow up. Note that if your custom component shares the same model with another existing components, you can first drag and drop the existing component to then change it to an instance of your custom component.
    Frank

  • Communicating with Third Party System

    Dear All
    I have a scenario where I want to send Idoc PEXR2002 to a bank.
    SAP 4.6C --> PI -
    > Bank
    I have made all the configurations to send the idoc to PI and I am sending the Idoc to PI using partner type Bank SAPPI successfully but in PI I am getting the error that receiver agreement not found.
    I have created the Bank as a Third Party System in SLD but  I am not sure how to link this third party system in ID (Integration Directory) .
    My questions are
    How to link the third party system created in SLD  with ID to send the IDOC using a HTTP Adapter i.e should I create the third party as a Business System or Business Service in ID.
    Second Question is while sending the IDOC from 4.6C to PI what kind of partner type I will use LS or Bank.

    Hi Adnan,
    Its complaining about the receiver agreement. So you need to make the receiver agreement. You can have a 3rd party business system for the bank and create teh receiver agreement between your sap business system and for this one. Add your bank receiver communication channel in this receiver agreement. Then it should work. Since you are using  PEXR2002  idoc then you dont need to create sender communication channel and sender agreement.
    In Sap while you create partner profile you can use bank as partner type.
    Regards,
    ---Satish

  • Migrating Third Party Document Management System into SAP EP KM

    Hello Everyone,
    We are having a requirement to Migrate the documents from Third Party (Intraspect) Document Management System into SAP Enterprise Portal KM.
    Documents in Intraspect are storing in Oracle Database. Our requirement is to Mirgrate the documents from Intraspect database to Portal KM Database.
    Please suggest that how we need to approach in Migrating the documents and permissions from Intraspect to KM.
    Thanks in Advance.
    Regards,
    Sridhar.

    Hi,
    Our requirement is to migrate the documents from intraspect oracle database to KM database.
    Please suggest how the migration happens from database to database. And also suggest whether this will effect the performance of portal as the intraspect database having very high volume of documents.
    If you have any links or any documents on this, please provide me.
    Thank You.
    Regards,
    Sridhar.
    Edited by: SridarReddy on Jun 4, 2009 1:36 PM

  • 7900 series IP Phone with third party Gateway/PBX system expansion

    Hello,
    I have a question about 7942G phone and 7937G phone.
    A customer wants to add 4x7942G and 1x7937G phone to their existing system.
    They currently have third party IP Gateway/PBX system with POE and having Cisco 3x7911G IP phones. Their current install/config is fully operational.
    I have few doubts to ask:
    Just by adding/connecting/configuring  7942G, 7937G  to the existing system will work?
    7942G has option for Channels ( CP-7942G-CH1 ----  According to 7942G data sheet) Do customer have to use this model?
    Thank you

    1. Really should ask PBX system vendor
    2. These all are the same exact identical device.

  • Can't update Adobe AIR after Yosemite update and need it for a third-party app.

    I updated to Yosemite and had some issues. After receiving help from Apple, I could not open a third-party app; it said I needed to update Adobe AIR. When I tried to do that, I got the same message saying I needed to update AIR again. I tried uninstalling and installing AIR but without success. What steps do I need to take?

    I had a similar problem when trying to install Zinio.air. I have made it all work out. What i did was remove Adobe Air 15 entirely from the Utiliites and Library/ accounts and preferences. I then downloaded Adobe Air 13 and installed and then clicked on Zinio .air and it all installed ok. I also had to temporarily change security settings from Apple approved to Anywhere. All functioning now.

Maybe you are looking for