This report cannot be executed because it may take too long to execute

Dear expert,
i am getting below message when user is trying to execute the report. I am new to Basis support, can any one let me know how to resolve this problem. This in R3 4.6 version
"This report cannot be executed because it may take too long to execute"
Thanks in advance for your help.
Regards.
Ameture

Hi Ameture,
This is not permanant solution, for better and running smooth business pls inform to ababper to change bad codding and provide expert coding so that you can run this report at any time. Becuase same problem already done with me. I have checked all the thing even the coding also and inform to abaper to change specific coding and expert coding. I found result immediately, earlier that report took 3-4 hours and now take 15-20 minuts only. Now user and myself both are happy.
Regards,
Anil

Similar Messages

Report Takes Too Long Time

Hi!
I am in troubble
following is the query
SELECT inv_no, inv_name, inv_desc, i.cat_id, cat_name, i.sub_cat_id,
sub_cat_name, asset_cost, del_date, i.bl_id, gen_desc bl_desc, p.prvcode, prvdesc, cur_loc,
pldesc, i.pmempno, pmname, i.empid, empname
FROM inv_reg i,
cat_reg c,
sub_cat_reg s,
gen_desc_reg g,
ploc p,
province r,
pmaster m,
iemp_reg e
WHERE i.sub_cat_id = s.sub_cat_id
AND i.cat_id = s.cat_id
AND s.cat_id = c.cat_id
AND i.bl_id = g.gen_id
AND i.cur_loc = p.plcode
AND p.prvcode = r.prvcode
AND i.pmempno = m.pmempno(+)
AND i.empid = e.empid(+)
&wc
order by prvdesc, pldesc, cat_name, sub_cat_name, inv_no
and this query returns 32000 records
when i run this query on reports 10g
then it takes 10 to 20 minuts to generate report
how can i optimize it...?

Hi Waqas Attari
Pls study & try this ....
When your query takes too long ...
hope it helps....
Regards,
Abdetu...

Query is taking too long to execute - contd

I am unable to post the entire explain plan in one post as it exceeds maximum length.
Please advise on how to post this.
Previous post Link : Link: Query is taking too long to execute
Regards,
Sreekanth Munagala.
Edited by: Sreekanth Munagala on Oct 27, 2009 8:31 AM
Edited by: Sreekanth Munagala on Oct 27, 2009 8:34 AM

Hi Tubby,
Today i executed only the first query in the view and it took almost 2.5 hrs.
Here is the explain plan for this query
SQL> SET SERVEROUTPUT ON
SQL> set linesize 200
SQL> select * from table(dbms_xplan.display);
PLAN_TABLE_OUTPUT
| Id | Operation                                        | Name                         | Rows | Bytes | Cost |
|   0 | SELECT STATEMENT                                 |                               |     1 |   766 | 2448 |
|   1 | TABLE ACCESS BY INDEX ROWID                     | PO_VENDORS                    |     1 |    13 |     3 |
|* 2 |   INDEX UNIQUE SCAN                              | PO_VENDORS_U1                 |     1 |       |     2 |
|   3 | TABLE ACCESS BY INDEX ROWID                     | PO_VENDORS                    |     1 |    29 |     3 |
|* 4 |   INDEX UNIQUE SCAN                              | PO_VENDORS_U1                 |     1 |       |     2 |
|   5 | VIEW                                            | POC_ASN_PICKUP_LOCATIONS_V    |     2 | 2426 |    17 |
|   6 |   UNION-ALL                                      |                               |       |       |       |
|   7 |    NESTED LOOPS                                  |                               |     1 |    85 |     4 |
|   8 |     NESTED LOOPS                                 |                               |     1 |    78 |     4 |
|* 9 |      TABLE ACCESS BY INDEX ROWID                 | PO_VENDOR_SITES_ALL           |     1 |    73 |     3 |
|* 10 |       INDEX UNIQUE SCAN                          | PO_VENDOR_SITES_U2            |     1 |       |     2 |
|* 11 |      INDEX UNIQUE SCAN                           | PO_VENDORS_U1                 |     1 |     5 |     1 |
|* 12 |     INDEX UNIQUE SCAN                            | FND_TERRITORIES_TL_U1         |     1 |     7 |       |
| 13 |    NESTED LOOPS                                  |                               |     1 |    91 |    13 |
| 14 |     NESTED LOOPS                                 |                               |     1 |    84 |    13 |
| 15 |      TABLE ACCESS BY INDEX ROWID                 | PO_VENDORS                    |     1 |    13 |     3 |
|* 16 |       INDEX UNIQUE SCAN                          | PO_VENDORS_U1                 |     1 |       |     2 |
PLAN_TABLE_OUTPUT
|* 17 |      TABLE ACCESS BY INDEX ROWID                 | FND_LOOKUP_VALUES             |     1 |    71 |    10 |
|* 18 |       INDEX RANGE SCAN                           | FND_LOOKUP_VALUES_U2          |    13 |       |     2 |
|* 19 |     INDEX UNIQUE SCAN                            | FND_TERRITORIES_TL_U1         |     1 |     7 |       |
|* 20 | COUNT STOPKEY                                   |                               |       |       |       |
| 21 |   TABLE ACCESS BY INDEX ROWID                    | MTL_SYSTEM_ITEMS_B            |     8 |   136 |    12 |
|* 22 |    INDEX RANGE SCAN                              | MTL_SYSTEM_ITEMS_B_U1         |     8 |       |     3 |
|* 23 | COUNT STOPKEY                                   |                               |       |       |       |
| 24 |   TABLE ACCESS BY INDEX ROWID                    | MTL_SYSTEM_ITEMS_B            |     8 |   288 |    12 |
|* 25 |    INDEX RANGE SCAN                              | MTL_SYSTEM_ITEMS_B_U1         |     8 |       |     3 |
| 26 | TABLE ACCESS BY INDEX ROWID                     | FND_TERRITORIES_TL            |     1 |    24 |     2 |
|* 27 |   INDEX UNIQUE SCAN                              | FND_TERRITORIES_TL_U1         |     1 |       |     1 |
| 28 | NESTED LOOPS                                    |                               |     1 |    40 |     5 |
| 29 |   TABLE ACCESS BY INDEX ROWID                    | HZ_CUST_ACCOUNTS              |     1 |    11 |     3 |
|* 30 |    INDEX UNIQUE SCAN                             | HZ_CUST_ACCOUNTS_U1           |     1 |       |     2 |
| 31 |   TABLE ACCESS BY INDEX ROWID                    | HZ_PARTIES                    |     1 |    29 |     2 |
|* 32 |    INDEX UNIQUE SCAN                             | HZ_PARTIES_U1                 |     1 |       |     1 |
| 33 | TABLE ACCESS BY INDEX ROWID                     | FND_TERRITORIES_TL            |     1 |    24 |     2 |
|* 34 |   INDEX UNIQUE SCAN                              | FND_TERRITORIES_TL_U1         |     1 |       |     1 |
| 35 | TABLE ACCESS BY INDEX ROWID                     | FND_TERRITORIES_TL            |     1 |    24 |     2 |
|* 36 |   INDEX UNIQUE SCAN                              | FND_TERRITORIES_TL_U1         |     1 |       |     1 |
|* 37 | COUNT STOPKEY                                   |                               |       |       |       |
PLAN_TABLE_OUTPUT
|* 38 |   TABLE ACCESS BY INDEX ROWID                    | ONTC_MTC_PROFORMA_HEADERS     |     1 |    21 |     3 |
|* 39 |    INDEX RANGE SCAN                              | ONTC_MTC_PROFORMA_HEADERS_U2 |     1 |       |     2 |
| 40 | TABLE ACCESS BY INDEX ROWID                     | FND_TERRITORIES_TL            |     1 |    24 |     2 |
|* 41 |   INDEX UNIQUE SCAN                              | FND_TERRITORIES_TL_U1         |     1 |       |     1 |
|* 42 | COUNT STOPKEY                                   |                               |       |       |       |
|* 43 |   TABLE ACCESS BY INDEX ROWID                    | ONTC_MTC_PROFORMA_HEADERS     |     1 |    21 |     3 |
|* 44 |    INDEX RANGE SCAN                              | ONTC_MTC_PROFORMA_HEADERS_U2 |     1 |       |     2 |
| 45 | SORT AGGREGATE                                  |                               |     1 |    39 |       |
| 46 |   NESTED LOOPS OUTER                             |                               |     2 |    78 | 1828 |
|* 47 |    TABLE ACCESS FULL                             | ONTC_MTC_PROFORMA_HEADERS     |     1 |    24 | 1825 |
| 48 |    TABLE ACCESS BY INDEX ROWID                   | ONTC_MTC_PROFORMA_LINES       |     5 |    75 |     3 |
|* 49 |     INDEX RANGE SCAN                             | ONTC_MTC_PROFORMA_LINES_PK    |    11 |       |     2 |
| 50 | NESTED LOOPS                                    |                               |     1 |   766 | 2448 |
| 51 |   NESTED LOOPS                                   |                               |     1 |   761 | 2447 |
| 52 |    NESTED LOOPS                                  |                               |     1 |   746 | 2445 |
| 53 |     NESTED LOOPS                                 |                               |     1 |   694 | 2443 |
| 54 |      NESTED LOOPS                                |                               |     1 |   682 | 2441 |
| 55 |       NESTED LOOPS                               |                               |     1 |   671 | 2439 |
| 56 |        NESTED LOOPS                              |                               |     1 |   612 | 2437 |
| 57 |         NESTED LOOPS                             |                               |     1 |   600 | 2435 |
| 58 |          NESTED LOOPS                            |                               |     1 |   575 | 2433 |
PLAN_TABLE_OUTPUT
| 59 |           NESTED LOOPS                           |                               |     1 |   552 | 2431 |
| 60 |            NESTED LOOPS                          |                               |     1 |   533 | 2429 |
| 61 |             NESTED LOOPS                         |                               |     1 |   524 | 2428 |
| 62 |              NESTED LOOPS                        |                               |     1 |   455 | 2427 |
| 63 |               NESTED LOOPS                       |                               |     1 |   429 | 2426 |
| 64 |                NESTED LOOPS                      |                               |     1 |   389 | 2424 |
| 65 |                 NESTED LOOPS                     |                               |     1 |   368 | 2422 |
| 66 |                  NESTED LOOPS                    |                               |     1 |   308 | 2421 |
| 67 |                   NESTED LOOPS                   |                               |     1 |   281 | 2419 |
| 68 |                    NESTED LOOPS                  |                               |     1 |   253 | 2418 |
| 69 |                     NESTED LOOPS                 |                               |     1 |   214 | 2416 |
| 70 |                      NESTED LOOPS                |                               |    39 | 7371 | 2338 |
|* 71 |                       TABLE ACCESS FULL          | RCV_SHIPMENT_HEADERS          |    39 | 5070 | 2221 |
|* 72 |                       TABLE ACCESS BY INDEX ROWID| RCV_SHIPMENT_LINES            |     1 |    59 |     3 |
|* 73 |                        INDEX RANGE SCAN          | RCV_SHIPMENT_LINES_U2         |     1 |       |     2 |
|* 74 |                      TABLE ACCESS BY INDEX ROWID | PO_LINES_ALL                  |     1 |    25 |     2 |
|* 75 |                       INDEX UNIQUE SCAN          | PO_LINES_U1                   |     1 |       |     1 |
|* 76 |                     TABLE ACCESS BY INDEX ROWID | PO_LINE_LOCATIONS_ALL         |     1 |    39 |     2 |
|* 77 |                      INDEX UNIQUE SCAN           | PO_LINE_LOCATIONS_U1          |     1 |       |     1 |
|* 78 |                    TABLE ACCESS BY INDEX ROWID   | PO_HEADERS_ALL                |     1 |    28 |     1 |
|* 79 |                     INDEX UNIQUE SCAN            | PO_HEADERS_U1                 |     1 |       |       |
PLAN_TABLE_OUTPUT
|* 80 |                   TABLE ACCESS BY INDEX ROWID    | OE_ORDER_LINES_ALL            |     1 |    27 |     2 |
|* 81 |                    INDEX UNIQUE SCAN             | OE_ORDER_LINES_U1             |     1 |       |     1 |
| 82 |                  TABLE ACCESS BY INDEX ROWID     | OE_ORDER_HEADERS_ALL          |     1 |    60 |     1 |
|* 83 |                   INDEX UNIQUE SCAN              | OE_ORDER_HEADERS_U1           |     1 |       |       |
|* 84 |                 TABLE ACCESS BY INDEX ROWID      | HZ_CUST_SITE_USES_ALL         |     1 |    21 |     2 |
|* 85 |                  INDEX UNIQUE SCAN               | HZ_CUST_SITE_USES_U1          |     1 |       |     1 |
|* 86 |                TABLE ACCESS BY INDEX ROWID       | HZ_CUST_SITE_USES_ALL         |     1 |    40 |     2 |
|* 87 |                 INDEX UNIQUE SCAN                | HZ_CUST_SITE_USES_U1          |     1 |       |     1 |
| 88 |               TABLE ACCESS BY INDEX ROWID        | WSH_CARRIERS                  |     1 |    26 |     1 |
|* 89 |                INDEX UNIQUE SCAN                 | WSH_CARRIERS_U2               |     1 |       |       |
|* 90 |              TABLE ACCESS BY INDEX ROWID         | WSH_CARRIER_SERVICES          |     1 |    69 |     1 |
|* 91 |               INDEX RANGE SCAN                   | WSH_CARRIER_SERVICES_N1       |     2 |       |       |
|* 92 |             TABLE ACCESS BY INDEX ROWID          | WSH_ORG_CARRIER_SERVICES      |     1 |     9 |     1 |
|* 93 |              INDEX RANGE SCAN                    | WSH_ORG_CARRIER_SERVICES_N1   |     1 |       |       |
| 94 |            TABLE ACCESS BY INDEX ROWID           | HZ_CUST_ACCOUNTS              |     1 |    19 |     2 |
|* 95 |             INDEX UNIQUE SCAN                    | HZ_CUST_ACCOUNTS_U1           |     1 |       |     1 |
|* 96 |           TABLE ACCESS BY INDEX ROWID            | HZ_CUST_ACCT_SITES_ALL        |     1 |    23 |     2 |
|* 97 |            INDEX UNIQUE SCAN                     | HZ_CUST_ACCT_SITES_U1         |     1 |       |     1 |
|* 98 |          TABLE ACCESS BY INDEX ROWID             | HZ_CUST_ACCT_SITES_ALL        |     1 |    25 |     2 |
|* 99 |           INDEX UNIQUE SCAN                      | HZ_CUST_ACCT_SITES_U1         |     1 |       |     1 |
| 100 |         TABLE ACCESS BY INDEX ROWID              | HZ_PARTY_SITES                |     1 |    12 |     2 |
PLAN_TABLE_OUTPUT
|*101 |          INDEX UNIQUE SCAN                       | HZ_PARTY_SITES_U1             |     1 |       |     1 |
| 102 |        TABLE ACCESS BY INDEX ROWID               | HZ_LOCATIONS                  |     1 |    59 |     2 |
|*103 |         INDEX UNIQUE SCAN                        | HZ_LOCATIONS_U1               |     1 |       |     1 |
|*104 |       INDEX RANGE SCAN                           | HZ_LOC_ASSIGNMENTS_N1         |     1 |    11 |     2 |
| 105 |      TABLE ACCESS BY INDEX ROWID                 | HZ_PARTY_SITES                |     1 |    12 |     2 |
|*106 |       INDEX UNIQUE SCAN                          | HZ_PARTY_SITES_U1             |     1 |       |     1 |
| 107 |     TABLE ACCESS BY INDEX ROWID                  | HZ_LOCATIONS                  |     1 |    52 |     2 |
|*108 |      INDEX UNIQUE SCAN                           | HZ_LOCATIONS_U1               |     1 |       |     1 |
|*109 |    INDEX RANGE SCAN                              | HZ_LOC_ASSIGNMENTS_N1         |     1 |    15 |     2 |
|*110 |   INDEX UNIQUE SCAN                              | HZ_PARTIES_U1                 |     1 |     5 |     1 |
I will put the predicate information in another post.
193 rows selected.
SQL> spool offPlease suggest on how can we improve the performance.
Regards,
Sreekanth Munagala.

The item referred to by this shortcut cannot be accessed. You may not have the appropriate permissions

Hi
I originally posted this in the Windows 7 Networking forum and they advised to post it here.
We use Windows 7 SP1 clients with Roaming Profile and Folder Redirection and they are connected to a Windows 2008 SP2 server. We are getting issues when someone tries to open files on their redirected Desktop and they get the message "'The item
referred to by this shortcut cannot be accessed. You may not have the appropriate permissions" if you click browse it then defaults to a different users profile. If you click through the errors the file eventually loads. If you open Word from
the Start menu and then browse to the file it opens fine. We have found that deleteting the Normal.DOTM file sometimes fixes the error, but only seems effective 50% of the time. This doesn't happen for all users, and seems to occur in small
groups and not all the time. We have also had the same message come up with someone trying to open Word files an online learning resource we have created.
There are a couple of events showing for about the time the error occured they are:
Type Error Source Application Error Category Name 100 Event 1000
Faulting application name: WINWORD.EXE, version: 14.0.4762.1000, time stamp: 0x4bae25b7
Faulting module name: wwlib.dll, version: 14.0.4762.1000, time stamp: 0x4bae2623
Exception code: 0xc0000005
Fault offset: 0x00034b81
Faulting process id: 0x1734
Faulting application start time: 0x01d0234ef75c42aa
Faulting application path: C:\Program Files (x86)\Microsoft Office\Office14\WINWORD.EXE
Faulting module path: C:\Program Files (x86)\Microsoft Office\Office14\wwlib.dll
Report Id: 6f74438b-8f42-11e4-9e45-00c2c6506cb5
Type information Source Office Software Protection Platform Service Category Name 0 Event 1003The Software Protection service has completed licensing status check.
Application Id=59a52881-a989-479d-af46-f275c6370663
Licensing Status=
1: 1f76e346-e0be-49bc-9954-70ec53a4fcfe, 1, 1 [(0 [0x00000000, 1, 0], [(?)(?)( 1 0x00000000 30 0 msft:rm/algorithm/hwid/4.0 0x00000000 0)(?)(?)(?)])(1 )(2 )]
2: 9da2a678-fb6b-4e67-ab84-60dd6a9c819a, 1, 0 [(0 [0xC004F014, 0, 0], [(?)(?)(?)(?)(?)(?)])(1 )(2 )]
3: dd457678-5c3e-48e4-bc67-a89b7a3e3b44, 1, 0 [(0 [0xC004F014, 0, 0], [(?)(?)(?)(?)(?)(?)])(1 )(2 )]
The software protection message we get in clusters of about 6 or more multiple times through the day

Hi
An update. We have approx 400 people with roaming profile/folder redirection on Windows 7/2008 and this only seems to have occurred to about 15 people, and then seems to clear up for a period and then happens again. We also have a similar number
of people with roaming profile/folder redirection on Windows 7/2003 system and we haven't had a report of this issue happening on this setup.
So far we haven't been able to replicate the issue using a test account, so are struggling to find out what is causing it and why it is so random.
Regrds
Dave

This ipod cannot be used because the required software is not installed. Run the Itunes installer to remove Itunes, then install the 64-bit version of Itunes.

I'm not sure if the error message is related but smart friend was using my computer started deleting Quicktime & Safari and told me that they shouldn't be on my computer as they are not windows product & I can't use them on my laptop. With trepidation but acknowledging I don't know any of the stuff they were talking about, I allowed them to raid my laptop thinking it could be for the best. Now I'm not sure if it is related or not but depsite me having the most recent Itunes updates on both my Ipod 4TH GT, I am getting the following message everytime I connect my Ipod to the computer...and the timing would be about right too:
this ipod cannot be used because the required software is not installed. Run the Itunes installer to remove Itunes, then install the 64-bit version of Itunes.
If it helps I am running the 10.7.0.21 on the Sony Vaio & remember checking last week I do have the latest update on the Ipod but it is a different version from the Itunes on the laptop (which may be normal, I wouldn't know) but as I am away from home & Wifi I can't tell u the version on that though.
My problem is I cannot find an apple installer on the laptop to uninstall & I have searched Apple & Google for help and have seen others posts with the same issue but alot of the answers unfortunately I can't follow. I would greatly appreciate it if you can you answer any of these questions for me?
*Will add & remove totally uninstall Itunes so that I can reinstall?
*Will I lose my apps, music & data?
*If the apps, music & data is recoverable, how do I do that?
Sadly I can't find the installer & would love to add my new Mumford & Sons cd to my Ipod collection but don't know how to fix this. I love my Ipod & google but I have spent hours tryign updates, downloads, searches & feedback to Apple. A few months ago I had an Itunes billing problem & there was a webpage where you could email an apple support worker & rhe replied to my credit card problem within a day or 2 but I can't find that help for this problem..I couldn't express my graditude enough if you could help me with this, but thank you.

dorygirl2009 wrote:
I'm not sure if the error message is related but smart friend was using my computer started deleting Quicktime & Safari and told me that they shouldn't be on my computer as they are not windows product & I can't use them on my laptop.
This "smart friend" really sounds like a collosal moron.
Follow the instructions here: http://support.apple.com/kb/HT1925 to remove and reinstall all Apple products on your computer.
Once you get everything working, the next time your "smart friend" wants to touch your computer, tell them firmly NOT A CHANCE IN ****!
None of your data (media, podcasts, apps) will be affected by removing and reinstalling iTunes.

APP-FND-01050: This flexfield cannot be opened because it has no displayed

Hi,
I am new to Oracle EBS R12.I created a profile and assiged "Indian HRMS Manager"
when i try to select Respnsibilities->work structure:Grade->Description
I got the Error
APP-FND-01050: This flexfield cannot be opened because it has no displayed segments. Please contact your system administrator.
Modify your flexfield definition to display one or more segments.
This may also be caused by incorrect use of the DISPLAY= token to the flexfield user exits in the form. In that case, please contact your support representative.
APP-FND-00730: This flexfield has an invalid value set. It may use a special value set that uses an Edit event user exit,
and the user exit has failed. If you are using a form on a graphical user interface (GUI) you may have an invalid value set
of a different type, possibly a table-validated value set where the table or view does not exist or
where there is an invalid WHERE clause.
Contact your system administrator or support representative to check and correct the value sets this flexfield uses.
how to solve this error................

Go to system administrator, choose define Key Flex field window. Query for the Grade KFF structure used for your business group. Check how many segments you have defined for it. Also check if at least one of them is enabled and displayed.
This would make it clear why you are getting the error. Correct it by creating/enabling/displaying at least one segment. That's it !!

When starting I get an error: "This operation cannot be completed because of an internal failure. A secure network communication has not been cleaned up correctly. "

Each time I start up Firefox 4.0b6 I am getting the following error message: "This operation cannot be completed because of an internal failure. A secure network communication has not been cleaned up correctly. ". I run Firefox 3.6 as my standard Firefox browser in paralell.

See https://bugzilla.mozilla.org/show_bug.cgi?id=588511
(please do not comment in bug reports)

Publisher - pdf - "This file cannot be opened because it has no pages"

Hi,
I have a Publisher report which works fine as a single page when generated to pdf.
I change the data model to give me multiple pages and insert the entire report content into a repeating frame which correlates with the header data that is definitely present for all records. ceteris parabus.
I preview this in interactive mode - everything works okay.
I preview this in pdf and I get the error; - "This file cannot be opened because it has no pages"
This is on well formed XML with a very modest data set.
Anyone have a fix or a pointer for this please??
thanks,
Robert.

Known bug.
8219848 - PDF TEMPLATE REPORT NOT PERFORMING PAGE BREAK

With my new macbook I attempted to open an older spreadsheet and get the following error message: "This spreadsheet cannot be opened because ti is too old. To open it, save it with numbers '09 first" So how does one do this when I only have ver3.1?

With my new macbook I attempted to open an older spreadsheet and get the following error message: "This spreadsheet cannot be opened because ti is too old. To open it, save it with numbers '09 first" So how does one do this when I only have ver3.1?

Numbers 3.x can only open Numbers '09 and later. You will need Numbers '09 to open Numbers '08 files.
If it is a single file (or only a few) you can email me and I will open and convert then email back. My email address is in the "Biography" of my profile.
You may have Numbers '09 installed. Look in the folder "/Applications/iWork '09" if Numbers is in that folder launch it, open the file you tried to open, and save. Then you should be able to open in Numbers 3.x

HT1386 Why can't I sync my iPad to pc, it says this iPad cannot be used because the apple mobile device service is not started

Why can't I sync my iPad to pc, it says this iPad cannot be used because the Apple mobile device service is not stated, the last time they were synced was December and I had no problem.

Log in as an Admin User on your PC. Type 'Services' in the search area above when you click on start. (or see control panel and select Admistrative Tools.)
Select the Services shortcut. In the window that appears with your listed service, navigate to ipod service, Apple Mobile Device service, and, Bonjour Services. Doubleclick them to get the property page. Change startup to automatic, click apply. Then click start,
There is a known issue that when iTunes updates it incorrectly sets the Service startup type - this is normally due to installations on Vista and win7 services and drivers that run in the Local Sstem requiring Admin account permissions that are not always granted with User Account Elevation, when running installations or updates in User account.
Normally the Local System is set to inherit the User account permission token when being set up - but Apple in their infinite wisdom have a higher token in place for their services. so a standard user cannot derogate the required elevation, even with the UAC to admin prompt, since the local system is owned by the Machine account and only Admin, bBackup, Restore, Machine, operator accounts carry the same descriptor permissions on process ownership to set these services correctly.
Third party security programs, such as Kaspersky can also limit installations by User account installations, which adds to the problem. I have had a few installations fail, even in Admin mode - because Kaspersky sits on par with the Main Machine Administrator account for watching program and installation directories and registry keys - (which have higher privilege levels in some respects than the ordinary Admin account you normally start a new machine in before you add any other user accounts- all very confusing - but that's Microsoft all over for you.
Follow Ralph's advice if you do not have the necessary software already installed. You should install Apple's Application Management Software - which will look after the installation of all required elements for you and notify you of updates pending. In options have it set to Notify only - not all updates may be requred, and this option allows you to see what is being installed. It is good practice to set all updating software to Notify only - especially any thirdparty software - much of which carry all sorts of little 'extra's' you may not need or want.
It is also good practice to keep an eye on your Program and Features option in control panel, just to see what is being installed and when - including Windows updates.
Sorry about the long reply, but with December being your last sync - a lot can change in the meantime. Best be prepared.
Best wishes, Ct

Tough Problem: This action cannot be completed because the other program is busy. Choose 'Switch To' to activate the busy program and correct the problem

Please, please help us!
We have an intermitant problem which is badly affecting a group of our users. Can anyone help identify what SERVER this message is talking about???
Details: CF-19 Panasonic Tough Book, McAfee Enterprise 8.7i, Windows XP 2005 Tablet Ed. SP3.
Problem at login intermittantly we get a unmanagable/unresponsive window stating the following:
Window Name: Server Busy
Text: This action cannot be completed because the other program is busy. Choose ‘Switch To’ to activate the busy program and correct the problem
Buttons: Switch To, Retry, Cancel (Grayed out)
Event Viewer Message:
Source: DCOM, Type Error,
Description: The server
{D6E88812-F325-4DC1-BBC7-23076618E58D} plus others with {6B19643A-0CD7-4563-B710-BDC191FCAD3B} did not register
with DCOM within the required timeout.
I searched the registry for {D63.....} and found keys relating to "TCServer.exe" Little info available. But found
((KB895953 - Memory Leak in Windows XP Tablet PC Edition )) but this seems related to a pre SP3 update.... we have SP3 installed can I still install this patch?
I searched {6B1....} and found keys relating to "TSFManager". Again little information available.
How can I identify the servers with the long {XXXXXXXXX} keys, and what is tcserver.exe?
Please help,
Tony Heslington.

Hi,
If the problematic XP PC is in a domain, please provide us more information on it, such as how many DCs, member servers and the OS versions. Does the error only
occur on one XP PC? Does the issue occur when logging on as some certain users? When did the issue begin to occur? Have you installed software, hardware or updates recently?
Please check whether the error occurs in Clean Boot mode.
1. Click "Start", go to "Run", and type "msconfig" in the open box to start the System Configuration Utility.
2. Click the "Services" tab, check the "Hide All Microsoft Services" box and click Disable All (if it is not gray).
3. Click the "Startup" tab, click "Disable All" and click "OK".
4. Restart your computer. If the "System Configuration Utility" window appears, please check the box and click "OK".
What is the result? For further assistance, please help gather the following information for research:
Event log
=========
1. Click "Start", click “Run”, input "eventvwr" and press Enter.
2. Expand the "Windows Logs" node on the left pane, right-click on "Application" and click "Save All Events As"; in the pop-up window, click to choose the Desktop
icon on the left frame, input "app" in the "File name" blank, and then click save.
3. Right click on "System", with the same method, save it as "sys".
4. Locate the two saved log files on the Desktop and send them to us.
Collect HiJackThis log
==============
1. Please download HijackThis from the following link:
http://www.techspot.com/download317.html
HijackThis is a tool to collect some system settings information which is useful for further troubleshooting.
Please Note: The third-party products discussed here are manufactured by vendors independent of Microsoft. We make no warranty, implied or otherwise, regarding
these products' performance or reliability.
2. Right click the downloaded “HJTInstall.exe” file and choose "Run as administrator".
Provide administrator password or click “Allow” if you are prompted to do so.
3. Click the "Do a system scan and save a logfile" Button.
4. A Notepad window will appear, please click “File”, “Save As...” to save it as HJT.log (or other file name you like) on the Desktop
and sent it to us.
Upload these file to the following workspace.
You can upload the information files to the following link.
(Please choose "Send Files to Microsoft")
Workspace URL: (https://sftus.one.microsoft.com/choosetransfer.aspx?key=900ac54d-301d-42da-876d-4546dc81a342)
Password: Y^dh$J1KR2u%UKL
Note: Due to differences in text formatting with various email clients, the workspace link above may appear to be broken. Please be sure to include all text
between '(' and ')' when typing or copying the workspace link into your browser. Meanwhile, please note that files uploaded for more than 72 hours will be deleted automatically. Please ensure to notify me timely after you have uploaded the files. Thank you
for your understanding.
Thanks.
Nina
This posting is provided "AS IS" with no warranties, and confers no rights.

HELP This iphone cannot be used because the apple moble device service...

This iphone cannot be used because the apple moble device service is not started. This is the error I am now getting. Can anyone tell me why? My phone is working fine. I an very confused. LOL

I assume that you are gettting this error message when you try to connect the iphone to your computer.
To start the service, right click on my computer and choose "Manage"
Then select the services tab. You should see the service listed towards the top of the window. Start the service and see if it works.
If not, you may need to re-install itunes. This will re-download the service for you.
Good luck...

Getting error REP-1352: The fonts specified for this report cannot be found

Dear Friends,
I'm getting the following error when I run my reports on Application Server installed in Solaris 9.
REP-1352: The fonts specified for this report cannot be found for the character set specified by NLS_LANG.
I searched internet and found the reason for the issue i.e., as follows.
REP-1352: The fonts specified for this report cannot be found for the character set specified by NLS_LANG.
Cause: The NLS_LANG environment variable specifies a character set for which no font is available.
Action: You may choose a font that exists in the character set specified by NLS_LANG. Alternatively, you may use the Font Alias file to force an available font to be used instead of the one specified in the report.
I cannot change the font for each & every report as there are more than 100 reports. HOW CAN I USE THE FONT ALIAS FILE? It is very Urgent, please solve my problem.
Please help me ASAP.
Thanking you.
With Kind Regards,
Senthil Alagu .P.

Check this post of Oracle related to font aliasing
http://download-east.oracle.com/docs/cd/B10464_05/bi.904/b13673/pbr_font.htm
Marcos

Have a 3rd gen nano, when I plug in I get "Podcasts on this IPOD cannot be synced because all of the podcasts selected for syncing no longer exist." I have no podcasts in my IPOD or queued in library. Help pls. Thx

Wnen I plug in my IPOD, I gret the error message " Podcasts on this IPOD cannot be synced because all of the podcasts selected for syncing no longer exist. I have no podcasts in my IPOD or queued in I tunes at pfresent. When I did try to sync a current podcast, nothing happened although the podcasts did show in my library. I did play around with podcasts several months ago, but just listened to them on the computer, the IPOD was plugged in at times though, although not set up...thx

Click here and follow the instructions.
(27971)

I am in the middle of a job using CS 6, but at the same time opening the Creative Suite apps. I created an InDesign file in CS 6, saved it, and now I can't open it. I'm getting this message: Cannot open file because it was saved with a newer version of A

I am in the middle of a job using CS 6, but at the same time opening the Creative Suite apps. I created an InDesign file in CS 6, saved it, and now I can't open it. I'm getting this message: Cannot open file because it was saved with a newer version of Adobe InDesign CC (10.1). You must use that version or later to open the file." AARRGGHH! So how do I access the file?

Sounds like you opened and saved it in CC, so now you need to go back to CC and either complete the project there, or export to IDML to take it back into CS6.

This report cannot be executed because it may take too long to execute

Similar Messages

Maybe you are looking for