Thread won't run in release mode

My application runs fine in Debug mode. I have several threads. A couple just blink some LEDS. In release mode they don't blink and my main function that is triggered by a button which runs a callback function that launches another thread doesn't work.

Hello,
it's difficult to try guessing what's happening with no informations available. Apparently ther's something that's causing a program crash in release mode and you suppose it relates to some problem in memory allocation. Additionally, it seems your program is consuming system resources until it fills up all available memory.
Are you freeing the dynamic memory when no longer needed? Are you sure you don't have any memory leak that can cause this increment in memory occupation? You must double check that every dynamic array allocated is freed when no longer used; you may want to swap part of the dynamic memory to disk if you are not using it constantly.
Additionally, have you a consistent and robust error checking method that logs all errors found to the user interface or to disk?
Another hint if you have CVI2009+ can be to activate extended debugging level in Build Options, next run the program some time in debug mode and close it: if some resources are not properly freed the Resource tracking window should appear with all allocated resources listed that are not correctly freed by the code.
Proud to use LW/CVI from 3.1 on.
My contributions to the Developer Zone Community
If I have helped you, why not giving me a kudos?

Similar Messages

My PlextorPX-708A won't run in DMA mode

My PlextorPX-708A won't run in DMA mode I've tried reinstalling it and this was also a fresh install of winXP with Service Pack1a, my other dvd dive which is made by shuttle and is older will run in DMA mode and PIO mode but the plextor DVd writer won't and when I use it in PIO mode music and videos play slow in it what is the problem, I have a MSI K7N2 Delta mobo and the two drives are hooked on the secondary IDE channel and I tried swapping both drives to slave or master What is the problem
Any help would be appreciated

Hi,
Bobby: When you are booting and the machine detects your HD's and CD-ROM's sometimes the firmware version is shown along with the drive's ID details, press "Pause" on the keyboard if you don't get time to read it!
Another way is to go Start>Settings>Control Panel> Double-click "System" then "Hardware" tab - then click "Device Manager" look for "DVD/CD-ROM Drives" in the list of hardware and then click on "+" on the left hand side - your CD-ROM drives should now be listed - right-click on the drive you want the info on, then down the menu to "Properties" then click on the "Details" tab - this should show you the "Device ID" and hopefully the firmware version. (my apologies for writing this step-by-step guide but I though I'd include it just in case)
Or another way is explained on Plextor's site here:
http://plextor.com/english/support/faqs/FW00006.htm
Axel

Thread (won't run on multiple CPUs)

I have read articles that claim java's threads will only run on one CPU no matter how many CPUs your system has. But most of those articles were of old versions of java, but I have mostly dual and some quad CPU machines running Linux and I tested out the latest version of the jdk (1.5) and have soem disappointing results. When I look at the CPU usage while I run multithreaded apps it seems there is always one that is over worked, and I think the other CPUs are just doing OS stuff not java stuff. I then did some tests looking at run times which should be almost linear as I increase my thread count (as long as I keep it under the number of CPUs), so on my quad CPU machines I should 2 threads better than one and 3 threads better than 2 and 4 threads should be my peek performance. The machines I tested were completly idle, and I had the exact same run times for all the runs even a little worse as the numbe of threads was increased. So it looks at though the threads aren't utilizing the multiple CPUs. I then made my program run in seperate threads and there was a linear increase, so there is definatly something wrong with the jdk and threading (on SMP machines) as far as I can tell... Anyone else have input?

I ran your code on a linux box running debian 3.0 with FOUR 750MHz processors:
Runtime 771 ms, rate=2594033 rand()/sec
Runtime 1445 ms, rate=2768166 rand()/sec
Runtime 1546 ms, rate=5174644 rand()/sec
$ uname -a
Linux shell 2.4.27-undaero #3 SMP Fri Sep 3 17:35:56 CDT 2004 i686 unknown
$ java -version
java version "1.4.2_01"
Java(TM) 2 Runtime Environment, Standard Edition (build 1.4.2_01-b06)
Java HotSpot(TM) Client VM (build 1.4.2_01-b06, mixed mode)
$
I ran your code on a Sun sparc with FOUR 450MHz processors:
Solaris 9 12/02 s9s_u2wos_10 SPARC
Copyright 2002 Sun Microsystems, Inc. All Rights Reserved.
Use is subject to license terms.
Assembled 05 November 2002
Runtime 1252 ms, rate=1597444 rand()/sec
Runtime 2545 ms, rate=1571709 rand()/sec
Runtime 1843 ms, rate=4340748 rand()/sec
agassiz% uname -a
SunOS agassiz 5.9 Generic_117171-11 sun4u sparc SUNW,Ultra-4
agassiz% java -version
java version "1.4.0_03"
Java(TM) 2 Runtime Environment, Standard Edition (build 1.4.0_03-b04)
Java HotSpot(TM) Client VM (build 1.4.0_03-b04, mixed mode)
agassiz%
I ran your code on a Red Hat Linux release 8.0 (Psyche) wit DUAL Pentium Xeon 2.4 GHz
Runtime 476 ms, rate=4201680 rand()/sec
Runtime 742 ms, rate=5390835 rand()/sec
Runtime 758 ms, rate=10554089 rand()/sec
podollb@Node5 ~>uname -a
Linux Node5 2.4.18-14smp #1 SMP Wed Sep 4 12:34:47 EDT 2002 i686 i686 i386 GNU/Linux
podollb@Node5 ~>java -version
java version "1.5.0-rc"
Java(TM) 2 Runtime Environment, Standard Edition (build 1.5.0-rc-b63)
Java HotSpot(TM) Client VM (build 1.5.0-rc-b63, mixed mode)
I ran your code on a SINGLE cpu Linux box running Slackware 9.1.0 with 333MHz Pentium II
Runtime 1018 ms, rate=1964636 rand()/sec
Runtime 2009 ms, rate=1991040 rand()/sec
Runtime 4010 ms, rate=1995012 rand()/sec
podollb@vectra ~>uname -a
Linux vectra 2.4.22 #6 Tue Sep 2 17:43:01 PDT 2003 i686 unknown unknown GNU/Linux
podollb@vectra ~>java -version
java version "1.5.0-rc"
Java(TM) 2 Runtime Environment, Standard Edition (build 1.5.0-rc-b63)
Java HotSpot(TM) Client VM (build 1.5.0-rc-b63, mixed mode)
I ran your code on a SINGLE CPU machine running Red Hat Linux release 9 (Shrike) 1.69GHz
Runtime 714 ms, rate=2801120 rand()/sec
Runtime 1416 ms, rate=2824858 rand()/sec
Runtime 2823 ms, rate=2833864 rand()/sec
podollb@equus ~>uname -a
Linux equus 2.4.20-8 #1 Thu Mar 13 17:54:28 EST 2003 i686 i686 i386 GNU/Linux
podollb@equus ~>java -version
java version "1.4.2_01"
Java(TM) 2 Runtime Environment, Standard Edition (build 1.4.2_01-b06)
Java HotSpot(TM) Client VM (build 1.4.2_01-b06, mixed mode)
I ran your code on a Fedora Core release 1 (Yarrow) with DUAL 1.66 AMD Athlon
Runtime 298 ms, rate=6711409 rand()/sec
Runtime 837 ms, rate=4778972 rand()/sec
Runtime 815 ms, rate=9815950 rand()/sec
podollb@zeus_master ~>uname -a
Linux zeus_master 2.4.22-1.2199.nptlsmp #1 SMP Wed Aug 4 11:49:01 EDT 2004 i686 athlon i386 GNU/Linux
podollb@zeus_master ~>java -version
java version "1.4.2_02"
Java(TM) 2 Runtime Environment, Standard Edition (build 1.4.2_02-b03)
Java HotSpot(TM) Client VM (build 1.4.2_02-b03, mixed mode)
I ran your code on a DUAL 2.8GHz Pentium Xeon running Red Hat Enterprise Linux AS release 3 (Taroon Update 2)
Runtime 485 ms, rate=4123711 rand()/sec
Runtime 451 ms, rate=8869179 rand()/sec
Runtime 484 ms, rate=16528925 rand()/sec
podollb@crayowulf ~>uname -a
Linux crayowulf 2.4.21-15.ELsmp #1 SMP Thu Apr 22 00:18:24 EDT 2004 i686 i686 i386 GNU/Linux
podollb@crayowulf ~>java -version
java version "1.5.0-rc"
Java(TM) 2 Runtime Environment, Standard Edition (build 1.5.0-rc-b63)
Java HotSpot(TM) Server VM (build 1.5.0-rc-b63, mixed mode)
I ran your code on a DUAL pentium xeon 1.69GHz
Runtime 678 ms, rate=2949852 rand()/sec
Runtime 1197 ms, rate=3341687 rand()/sec
Runtime 1773 ms, rate=4512126 rand()/sec
podollb@tycho ~>uname -a
Linux tycho.rwic.und.edu 2.4.18-24.7.xsmp #1 SMP Fri Jan 31 06:10:55 EST 2003 i686 unknown
podollb@tycho ~>java -version
java version "1.4.1"
Java(TM) 2 Runtime Environment, Standard Edition (build Blackdown-1.4.1-beta)
Java HotSpot(TM) Client VM (build Blackdown-1.4.1-beta, mixed mode)

Database control won't run in secure mode

I'm following the instructions displayed by the database configuration manager after creating a database. These instructions configure the database control to run in secure mode using https. I get an error with the following command run from the OS command line while in the ORACLE_HOME/bin directory:
emctl.bat secure dbconsole -sysman_pwd password
I get the error message "Failed to create EM root key."
The emdctl.trc file has the following entry: "No connection could be made because the target machine actively refused it."
The ORACLE_SID has already been set. The database control is down. The "emctl config emkey -repos" command completed successfully.
I'm using Oracle 10.2.0.4 on Windows 2003 server. I'm running this command on the database server. The database control was selected in the database configuration manager. This database control does run successfully in http mode, but I can't configure it for https.
Does anyone know why the target machine would actively refuse this connection?

Have you tried it without the -sysman_pwd flag ?
MOS Doc 276950.1 - How to setup Enterprise Manager Database Control for SSL (HTTPS) secure connection
HTH
Srini

Thread won't run

in my program i want a thread name getdata to start, but it does not. if it did a statement in system would say so. Any help in getting the thread to run would be great thanks. Here is the code:
public void listenSocket() {
     if ( connected==("2") ) {
//Create socket connection
     try{
       socket = new Socket(ipaddress, 4444);
       out = new PrintWriter(socket.getOutputStream(), true);
       in = new BufferedReader(new InputStreamReader(socket.getInputStream()));
     } catch (UnknownHostException e) {
       System.out.println("Unknown host: host your connecting to");
       System.exit(1);
     } catch (IOException e) {
       System.out.println("No I/O");
       System.exit(1);
               connected = "1";
               Thread getdata = new Thread();
               getdata.start();
     else {
          try{
                socket = new Socket(ipaddress, 4444);
       out = new PrintWriter(socket.getOutputStream(), true);
       in = new BufferedReader(new InputStreamReader(socket.getInputStream()));
     } catch (UnknownHostException e) {
       System.out.println("Unknown host: host your connecting to");
       System.exit(1);
     } catch (IOException e) {
       System.out.println("No I/O");
       System.exit(1);
     senddata();
public void run()
          if( getdata == Thread.currentThread() )
               System.out.println("running getdata thread");
               friendtypingLabel.setText("running get data");
               getdatamethod();
}

I believe you really have to read the API about Thread this is not the way at all how you can create a new Thread.
Thread getdata = new Thread();
getdata.start();Create a new Thread object with itself as its underlying Runnable. Therefore when you start it, it process the run() method of Thread class which is empty. You must create a class which extends Thread and overload its run method instead or create a class that implements Runnable and create the new Thread with:
Thread t = new Thread(myRunnable);
t.start();

Flash Player won't Run in Unsafe Mode anymore

Hi everyone,
Yesterday I installed this new version of Safari (6.2), but it ended up breaking Flash Player and the ability to run Flash in Unsafe Mode. "Why would I want to run it in unsafe mode?" you might ask. I use Hear an EQ to improve the audio quality, and the only way to make it work with Safari and Flash Player is by using it in Unsafe Mode. And that's another reason why I still use ML, because Mavericks is so sandboxed that Hear won't even work on the system sounds, like Alerts and Quick Look.
If anyone have a solution to this, I more then appreciate your help. If there is no solution, could you send me the link to the old version of Safari and how to downgrade? I think the old version is the 6.1.2, not sure.
Thank You,
Jake.

It's installing correctly if it's in your Add-ons manager. The "plugin" is 6mb. The rest is WAY bigger.
See:
The rest of the problem ISN'T with Flash Player. It's with IE11.
This is a known problem with Internet Explorer 11, which Microsoft has been aware of since October 18 when they released their latest "untested" browser. The pages can't recognize the browser, so they don't recognize any of the plugins, like Flash Player. So far, Microsoft has made NO indication that they have any plan to fix it soon.
Microsoft's recommendation is to use Compatibility View for affected pages, and "pretend" you're using an different browser. Trouble with that is it has seen limited success at best, and you have to individually enable it for EVERY page that has problems.
I'm not big on "pretending" so I recommend actually using another browser.
Firefox (from Mozilla)
Opera (from Opera)
Safari (from Apple)
Chrome (from Google)
ANY of those will work where IE11 won't, with the Flash Player Plug-in (For all other browsers), and Chrome doesn't even need that because it has its own Flash Player plugin built in.

Since updating to XI 11.0.10.32 Reader won't run in Protected Mode. How do I fix this?

The "tell me more" was no help at all. I'm running Windows 7 Home Premium SP1 up to date with patches, and AVG Ultimate 2015 with ZEN for internet security, and configuration optimisation.

Most likely it will work if you select 'Always open with Protected Mode disabled'.

Thread won't run a second time

Using JDK 1.4.1 on a Windows 2000 box
After a thread is created, started and completes, it is not possible to start the same thread object a second time.
I'm not sure what's going on here. It seems that a thread pool implementation could never work if what I've found is true. This seems unlikely, but my test program is very simple. If you run it you will notice that run() is called after the first start(), but not after the second. The isAlive() state returns false as expected after the join(), so it appears the thread has finished executing. I've tried sleeping in various ways waiting for the thread to start the second time, but it never starts.
public class ThreadTest
    private static class MyThread extends Thread
        final public void run()
            System.out.println( "run() called" );
    private static void testThreadRestart()
        for ( int i = 0; i < 10; i++ )
            System.out.println( i );
            try
                MyThread thread = new MyThread();
                System.out.println( "start() called 1" );
                thread.start();
                thread.join();
                System.out.println( "thread.isAlive() = " + thread.isAlive());
                //Thread.sleep( 60000 );
                System.out.println( "start() called 2" );
                thread.start();
                thread.join();
                System.out.println( "thread.isAlive() = " + thread.isAlive());
                // Try a sleep loop to wait for the thread to start.
                for ( int j = 0; j < 1000; j++ )
                    Thread.sleep( 1 );
                //Thread.sleep( 60000 );
            catch ( InterruptedException e )
                // do nothing
    public static void main( String[] args )
        testThreadRestart();
}

I found the following information in "Concurrent Programming in Java" 2nd Edition, by Doug Lea.
"Threads are not restartable, even after they terminate. Invoking start more than once results in an InvalidThreadStateException."
The first part seems to be true, but the second part is only true if the thread is still alive. Once the thread completes, calling start() a second time results in no exception and no action.
I did not find any such information in Sun's documentation.
Apparently a thread pool implementation relies on threads that never "finish". That is the thread object never exits the run() method, but employs a mechanism by which it accepts new tasks, executes them. When the task completes, the thread's run() method loops and waits for a new task. run() is never exited.

Call labview dlls in release mode

Hi all,
I built a LabVIEW dll for the bluetooth connection, at the beginning I called this dll in the VS C++ in the debug mode, it worked very well.
but due to the application, all the code should run in release mode. Unfortunately error occured, " Runtime error, R6030 CRT not initialized".
I googled, but i did not get something useful.
I appreciate any comments and information, and apologize for my poor english.
ps. I tried to use different runtime library, and finially I got only multi-thread DLL was suitable.

the attachments are the VC code and the dll files,
I really appreciate any comments about thie problem.
Attachments:
bluetooth test.zip ‏869 KB
lib.zip ‏340 KB

I am trying to run my registered CS6 Design Standard programs for the first time after install. InDesign runs OK, but Illustrator and Photoshop will only run in trail mode. How do I activate those two?

I can't get my registered versions of CS6 Photoshop and Illustrator to run in full mode. I installed CS6 Design Standard online end of June (an upgrade from CS5.5), on my old MacBook Pro. I didn't run the programs then as I was waiting on arrival of new MacBook Pro. I migrated the programs from my old MacBook to the new, and today tried to run those programs for the first time. InDesign work OK (after an initial hiccup) but Illustrator and Photoshop will only run in trial mode, and won't let me save files. My CS6 Design Standard shows with it's registration in my Adobe Account. All seems in order, but Illustrator and Photoshop won't run in registered mode. Can you please help?

Demons1 in the future please only migrate your documents and settings.
Please use the uninstallers to remove your current installation. They are located in the Applications/Utilities/Adobe Installers folder. Once the uninstall is complete you will also want to run the CC Cleaner Tool. You can find more details at Use the CC Cleaner Tool to solve installation problems | CC, CS3-CS6 - http://helpx.adobe.com/creative-suite/kb/cs5-cleaner-tool-installation-problems.html.
If you need to download a fresh copy of the installation files for Creative Suite 6 you can do so at Download CS6 products.

Firefox 24 and 25 won't run on server identities?

I downloaded the last update, 24, which worked fine on local identities. When I try to open it in a server/network identity, it never opens, just hangs - I tried opening in safe mode (opt key + open, choose safe mode) and it acts like it will open, but never loads, and I can't click any buttons on the toolbar (or I can click one, but nothing ever loads). Resetting doesn't work either. It does the same thing on all computers, only server identities.
I've tried creating a new profile, deleting old profiles, changing places suffixes to ".old", deleting prefs file - nothing worked. Firefox never opens, so I can't do any of the support related to the toolbar.
I think it's related to an add-on, because it first crashed when trying to find compatibility with add-ons. It won't run in safe mode, though, so I can't tell.
My next step is going to be trying to find where all the add-ons are located, and delete them manually, but I'm not sure where to start.
If anyone has any other advice, that would be great!

Hi,
Thanks, but it didn't work~~
I tried to delete the extensions from the folder first, but when I tried to open firefox, it had the same problem.
I actually removed both the Mozilla folder and the Firefox folder as a last resort, and it's still not working.
The window pops up, with the "bookmarks and history system will not be functional... Some security software can cause this problem" error message. The "Learn More" button is not clickable.
I've disabled all security software and even my firewall, and it's still happening. My extensions/addons are deleted.

Code runs fine in debug mode but hangs when compiled in release mode

I am struggling with the following problem. I have code which runs fine when it is executed in debug mode. However, when I compile it in release mode and run the executable, the code freezes and does not work. The code acquires images from a Hamamatsu camera. In the debug mode I am able to continuously acquire images. However, in the release version, the code hangs after acquiring the first image.
I am using LabWindows/CVI version 7.
I would greatly appreciate if I can get any help/suggestions in resolving this problem?
Thanks!
Regards,
Sripad
Solved!
Go to Solution.

Sripad:
If you search this forum for "debug release crash" or "release version crash" or similar phrases, you'll find that this is a pretty common question. Look through the other posts you find here to see if anything is applicable to you.
The debug version does some things like padding variables so you can sometimes overrun your declared variable space without overwriting the next variable. In the release, the variables are packed, so if you overrun one, you are overwriting another. Just one possible difference.
You can do some things in your release code to see where things get lost, like (temporarily using printf statements after multiple statements at the start and end of your loop to try to identify that failing line of code.
Look through other threads to find other ideas.

Project runs Ok in debug mode but not in release mode

I have an application developed with VC++ 6.0 and measurement studio. The application controls SCXI-1161/1166 relay boards to connect the UUT. The application runs ok in debug mode, but in release mode the application can't drive the relay boards. I have tried to change optimizations mode, it didn't work. Who can tell me how to solve the problem? Thanks!

It sounds like you have an older version of our SWITCH driver which relies on our DAQ driver. I would recommend uninstalling the Traditional DAQ, DAQmx, and SWITCH drivers and then installing the newest version. At this point you have 2 options:
1) You can download Traditional DAQ 7.4, DAQmx 7.4, and NI-SWITCH 2.4 drivers bundled together here: ftp://ftp.ni.com/support/daq/pc/ni-daq/7.4/
2) You can install the latest version: NI-DAQmx 7.5 here: http://digital.ni.com/softlib.nsf/websearch/CF7ECCEA4C4CC7DE86257038004D88AE?opendocument&node=13206... This has support for all of our USB DAQ devices (if you're not using them then you may not want to worry about installing this now) and then install Traditional DAQ 7.4 here: http://digital.ni.com/softlib.nsf/websearch/C36A54ADDA3DC33D86257038004E55E6?opendocument&node=13206... and NI-SWITCH 2.4 here: http://digital.ni.com/softlib.nsf/websearch/9D6B8C7FD41BF3D08625702E0072E294?opendocument&node=13206...
This should solve your problem.

PT880-Neo, Won't run in Dual, only Single mode

I have two 512 pairs of RAM (DDRAM 512M|PC-3200 991093 MUSHKIN R) that won't show up in CPU-Z or the POST message as running in Dual mode. It'll only show in single mode. I've tried every combination of slots (i.e. 1 & 3, 2 & 4, etc, etc) to no avail. I've also tried adjusting the BIOS to specify dual channel as well as letting it "auto" adjust. I've tried changing the RAM ratio's 1:1, 5:4, etc with all of the above combinations. Any suggestions would be appreciated....
PS. Bought the board two weeks ago. Haven't checked to see if there is a BIOS update. Don't see that as a reason it won't work since it ships as a Dual DDR 3200 compatible board.
My rig:
PT880-Neo LSR
Intel 2.4A Prescott (stock fan/heatsink)
2 Mushkin 512 DDR PC3200
ATI Radeon 9800 Pro
WD 74G 10k Raptor SATA 8mb
Hitachi 160GB SATA 8mb
Creative Audigy 2 ZS
Antec True430 430W PSU (+5V@36A, +3.3V@28A, +12V@20A, [email protected], -12V@1A, +5VSB@2A)
Large Server Case (6 fans)
18.1" Gateway LCD
Logitech Z-680, 500W 5.1

During bootup, did you see "Dual Channel Liner Mode" or "Single Channel Virtual Mode" on the bootup screen?

Hp g62 freezes and won't run except in safe mode

My hp g62 won't run except in safe mode and when I run normally it freezes. I been reading in the post of the same existing problems and tried the start up test and it failed the short Dsp. What should I do

Hi @Daver1976 ,
Thank you for visiting the HP Support Forums and Welcome. I have looked into your issue about your HP G62 Notebook and Short DST failing. Here is a link to restore the BIOS.
You could try safe mode disk defragmenter it will scan your computer. Just click on start and type disk. Select C: and select defragmenter.
Please note remove any and all USB devices, and remove memory cards from the card reader slot. Disconnect all non-essential devices.
Here is a link to do a hardware test. It can let you know if something is failing and the code it gives you would be helpful.
Hope this helps you, please let me know if you receive any errors.
Thanks.
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the bottom to say “Thanks” for helping!

Thread won't run in release mode

Similar Messages

Maybe you are looking for