Thumbnail titles and search options help

Is the following possible? On the thumbnail sections, we have small thumbnail and thumbnail title. Is there a way for the title to display in full rather than only when we hover over. Right now I can only see one line of the title. When we hover over, we see the rest of the title.
Also is there a way to change how the search works. By default, it searches everything inside the powerpoint. Any way to have it just search a particular section like title or notes. I know I can edit the XML manually but that would tedious to edit all the content.
If its not possible yet, then I hope Adobe can come out with a patch. The first one should be easy to implement as it already practically done. The only difference now is I have to hover over to see the title in full. Why can't it just show the full title by default or at least show as much of title possible based on the space that the thumbnail creates. That's the biggest user complaint is they have to hover over to read the full title to determine if they want to look at that slide
thanks

I will be out of the office starting 01/04/2010 and will not return until
12/04/2010.
If your matter is urgent, then please contact Emma Dawson on ext. 15832.

Similar Messages

Webinar: Understanding TREX Indexing and Search Options

SAP NetWeaver Know-How Network Webinar:
Understanding TREX Indexing and Search Options
Wednesday 25 August 2004
11 a.m. EDT
On Wednesday 25 August, Larry Brambrut, an EP RIG Consultant, hosts the webinar titled Understanding TREX Indexing and Search Options as part of the ongoing SAP NetWeaver Know-How Network Webinar Series.
Heres how Larry describes his webinar presentation:
This session will describe the enhancements to "Search and Classification"(TREX) in NetWeaver '04 and EP 6.0 SP2 Patch 6. The session will include a discussion of the CM enhancements such as new crawlers, new search UI options and plug-ins, and TREX enhancements such as the new TREX architecture, delta indexing, and new TREX Admin Tool.
SDN invites you to post your questions to the presenter prior to the webinar and continue the online discussion afterward.
How to Participate
(Please go to the SDN webinar schedule page to find more information)
Dial-in Information:
Date: Wednesday 25 August 2004
Time: 11 a.m. EDT
Within the U.S., call: +1.888.428.4473
Outside the U.S., call: +1.651.291.0618
Password: NetWeaver04
WebEx Information:
Topic: SAP NetWeaver Know-How Network
Date: Wednesday 25 August 2004
Time: 11 a.m. EDT
Meeting Number: 742391500
Meeting Password: netweaver04 (lowercase)
WebEx Link: sap.webex.com
Replay Information:
A recorded replay of this call will be available for approximately three months after the webinar. Access this recording by dialing the appropriate number and using the replay access code 720155.
Toll-free: +1.800.475.6701
International: +1.320.365.3844

About the SAP NetWeaver Know-How Webinar Series
The SAP NetWeaver Know-How Webinar Series is driven by the SAP NetWeaver Regional Implementation Group (RIG), part of the SAP Development organization. The mission of the SAP NetWeaver RIG is to enable customers, employees, and partners to successfully implement the SAP NetWeaver solution. This SAP RIG has expertise in BI, EP, XI, and WebAS. They contribute their implementation expertise to the SDN implementation forums as well as to the SAP NetWeaver Know-How Webinar Series.
Disclaimer
SDN is not responsible for any changes to the webinar schedule. The webinar schedule may be changed or cancelled without prior notice.

Hi there,
I just read this thread, and maybe someone here can answer my current trex question:
I have created an ordinary CM repository, and created an index with this repository as source. Now the problem: I would like to exclude files in the repository with specific mimetypes from the TREX indexing process.
I have verified that the TrexValidMimetypes.ini does not contain any reference to the Mimetypes I'm creating, but never the less, the document titles are searchable and are returned when searching.
How do I get around this issue?
Is it possible in NW04 or EP6.0 SP3 PXXX??
Regards,
Hco

How to use auto-increment and search option for MS Access DB

Dear All,
I have configured our invoice in Adobe Livecycle and connected it to MS Acess 2007 as per http://forms.stefcameron.com/2006/09/18/connecting-a-form-to-a-database/.
All is working fine, I can insert, retrieve data from DB to invoice and vice versa.
Now I want few things to be implemented on our invoice.
When ever I open our invoice, it populate the first entry from DB, Is it possible to populate the last entry ?
Auto increment invoice number from MS Access DB every time we open our invoice after save.
How to implement search option from DB for invoice number ?
Please let me know if someone can provide me help on my scenario, so that I can share more stuff related to invoice and DB.
Look forward to hearing soon from experts and other team members.
Thanks & Regards
Riyad...

As far as I know there is not any auto increment data type in Oracle. Instead of this you should create a sequence and get the next value of the sequence while creating a row in your table.
CREATE SEQUENCE Test_Sequence ;
CREATE TABLE Test_Table ( Id NUMBER , Foo VARCHAR2(4) ) ;
ALTER TABLE Test_Table ADD CONSTRAINT Test_Table_PK_Id PRIMARY KEY ( Id ) ;
INSERT INTO Test_Table ( Id , Information ) VALUES ( Test_Sequence.NEXTVAL , 'FOO' ) ;

Ibooks author inspection widget: grayed-out title and caption options when object is selected

I'm trying to add titles or captions to photos in an iBooks Author project. I select the photo, click on Inspector and Widget, then Layout. The only active option on Layout is the Accessibility Notes. Is this a bug? What am I missing?

Right.
You can create text boxes next to an image for title and caption, but otherwise, those are attributes for a widget with media.

PLAYLIST order and SEARCH option

how do i get the playlist to play songs in a specific order
i have renamed all filenames and idtags and still they come in chaos
and another thing: SEARCH option
newer ipods come with the search option (as i read at apple site). i updated my 30G 5th generation ipod to the newest software and didnt get that option. is it possible to get that?
thanks
oh by the way, im new here and this is my first post!

how do i get the playlist to play songs in a specific order
i have renamed all filenames and idtags and still they come in chaos
If you are really referring to a "Playlist" then simply physically move the music into the order your want it played. If you are really referring to a "Album" here, then assign a "Track" order in which you want them played.
and another thing: SEARCH option
newer ipods come with the search option (as i read at apple site). i updated my 30G 5th generation ipod to the newest software and didnt get that option. is it possible to get that?
Sure, buy one of the new iPods. This is a new hardware featue -- not a software feature.
oh by the way, im new here and this is my first post!
Welcome to the discussions forum.

Editing tools and search option stopped working after IOS Update

Hi All,
Since the last IOS & Adobe Reader Update I have been unable to edit or search within existing PDF using the Adobe Reader iPad App. I have noticed the document now shows as protected on the Iphone Adobe Reader App but does not give me any option to unprotect it. Please bear in mind I have been editing this document for over 6 months now and the document shows my previous annotations.
Any ideas on how to resolve this issue?
Many thanks
S

Hi Sue,
Yes, we received your PDF document via email. Thank you!
I can confirm the following:
Your PDF document is not encrypted or locked by password.
This is a defect in Adobe Reader for iOS version 11.6.4 (or possibly all 11.6.x versions) for the particular type of PDF documents like yours. (The problem does not happen with all PDF documents.) The tools/areas that are affected by the defect: Search, text selection, text markup annotations (highlight, strikeout, and underline). However, you can still add other types of annotations, namely sticky notes, free text, and freehand drawing, to the PDF document.
The defect has already been fixed in our internal build for a future release. (I was able to add highlight/strikeout/underline and search text in your PDF document.) Unfortunately, I am not able to speculate on the next release date.
Sorry for the inconvenience. We hope that you switch back to Adobe Reader for iOS once the defect is fixed.
Thank you for reporting the problem!

Titles and Photo Quality - help please

I have created a movie for work in iMovie.
Exported to .DV [full quality] (i tried other formats but .DV gave me the best viewing quality - nearly perfect when viewing with QT Player).
I take this .DV file and load it into iDVD with another movie and form a menu with them. The DVD menu looks great (sharp). However when you play the 2 movies the quality of the video has degraded. How did i lose this quality going to iDVD?
Mostly, it is just my sub-titles that appear more fuzzy. I would like to be able to keep them as sharp and clean as possible for viewing on TV.
Does anyone know and can explain how to keep my sub-titles to as best quality as possible?
The movies are 3 minutes and 5 minutes. I used Professional Quality on iDVD.
Thanks for any help.

Yes
There seems to be a problem when going from iM08 to iDVD. Work around is described as:
(not tested full out)
One must open the iMovie movie project with QuickTime (probably -pro)
Not really sure how - most probably exporting as full quality or if using
iMovie 1 - 6 open the project (ctrl-click and Show content of package)
Then when it is opened in QT show info and select the small box "full/high quality"
Next save and close.
Not tested this though I still stay in iM6 or FCE/P.
But this behaviour (or very similar) is described in this forum.
AND - try to do a DiskImage instead of burning away DVD discs. Cheaper.
(Down in the File menu)
Yours Bengt W

PDF Imbedded Title and Search Results

I am in the process of developing a intranet search and have come up against a problem with PDF files. The embedded title is delivered up as the link in the search results. Most of the PDFs we link to are created outside our department, so the embedded title is meaningless to our users.
Any ideas about how we can change the title? Thanks.

I have never seen anyone request this so no information from there. Also I cannot think of any way of doing it. The only solution might be to prefix topic titles or put the information on the first line of the content. However, that is going to take up space better used letting the user see the initial topic content.
See www.grainge.org for RoboHelp and Authoring tips
@petergrainge

ITunes 9 Mini-Player and search option

Before I downloaded iTunes 9 and was running all my music through iTunes 8, I was able to search for keywords and that became the playlist. I switched to Mini-Player and it continued endlessly through this selected search. I am not able to do that with iTunes 9, I search for songs, switch to Mini-Player and the search somehow escapes itself and starts playing my whole Music listing of songs.
Is anyone else having this problem?

I have this issue, both on my computer, and on my girlfriend's Macbook Pro. Prior versions of iTunes would constrain its Shuffle to within my search results when using the Search function in the upper right corner of iTunes. 9.x basically ignores the search results, and shuffles within my entire library. There doesn't seem to be any way to fix it, as there are very limited "shuffle" options in the Controls menu.

Problems with titles and backgrounds PLEASE HELP

At the beginning of my movie, I have inserted a title (pixie dust) which prompts me to include a background. I have done so. However, when i play the movie in full screen sometimes the title doesn't even show up at other times the title shows but without the pixie dust feature. I have tried to rectify this using precision editor but it doesn't work. When I play the video in the project library the pixie dust feature shows up. Please help. What am I doing wrong?

This seemed to be a bug in iMovie v.8.0.6. I have the same problem independently of the font and the background but only at the beginning of the project.
To avoid this problem make a short transition before the title clip and the text will appear in fullscreen mode too.
Good luck.

How to enable categories in iCloud Outlook contacts and search option to include contacts notes?

So, I've seen various threads about iCloud not supporting categories as we know them in Outlook. Categories are kept in iCloud contacts (in Outlook) but they just don't work as they did when contacts where in Outlook's PST folder. I haven't seen that someone has found a solution to work this out without having to create groups one by one. The other problem though is that when I search iCloud contacts in Outlook, I type in a keyword and the contact with the supposed keyword in its categories does not display if the contact has more than one categories linked to it. Prior to iCloud I was able to pull up contacts by typing in a word in the search bar. For instance, I'd type in a keyword of one my categories and Outlook would display all contacts that contained the word I searched (be it if the contact contained the keyword in its contact fields, categories, or notes). Now, when I search a keyword, iCloud does not pull up the contact(s) with the specific word if the contact has more than one categories linked to it. It also appears that iCloud contacts in Outlook does not search keywords that are in the contacts' notes. Does anyone know how to get these features to work? I basically need iCloud contacts to be able to search contacts along with their categories and their notes and display all contacts that contain the word I typed in the search bar.

Hi there,
I would recommend taking a look at some of the troubleshooting steps found in the article below.
iPhone, iPad, iPod touch: Troubleshooting contact and calendar syncing via USB on Windows
http://support.apple.com/kb/HT1692
-Griff W.

Edit standard search options properties on km search iview

Hello,
i've created a custom km search iview.
For that i've created a custom Search component Set and Search Options Set. I've enabled the Standard Properties on the Search Options Set. Is it possible to edit the layout for the Standard Properties.
Best regards,
TomSd

Hi TomSd,
what do you mean by 'change the layout of the standard properties'?
What you can do is change the properties that are displayed. Have a look at this: http://help.sap.com/saphelp_nw04/helpdata/en/cc/f4e77ddef1244380b06fee5f8b892a/frameset.htm and the description for 'predefined properties'
Kind reagrds
Karin

I am trying to remove the older version of iTunes but an error message appears saying that it cannot find the path to 'iTunes64.msi", and I tried the search option to find it on my computer but no such luck. Please help me

I am trying to remove the older version of iTunes but an error message appears saying that it cannot find the path to 'iTunes64.msi", and I tried the search option to find it on my computer but no such luck. Please help me

Go to Microsoft website to fix install and Unistall problems. Click "Run now" from Fix it to remove all iTunes & related installer files:
http://support.microsoft.com/mats/Program_Install_and_Uninstall
Be aware that Windows Installer CleanUp Utility will not remove the actual program from your computer. However, it will remove the installation files so that you can start the installation, upgrade, or uninstall over.

I'm not able to do the DELETE and the SEARCH options on my list ( HELP!! )

import java.io.*;
public class StudentContactManager
public static void main(String[] args) throws IOException
char userSelection;
final int maxStudents = 10;
String [] Lname = new String [maxStudents];//LName= Last Name
String [] FName= new String [maxStudents];//FName=First Name
String [] En= new String [maxStudents];//En = Enrolment Number
String [] PhoneNo= new String [maxStudents];
int activeEntries = 0;
boolean found = false;
//================================
System.out.println ( "1 - Initialise contact detail list" );
System.out.println ( "2 - Display contact details list" );
System.out.println ( "3 - Insert new entry into cotact detail list" );
System.out.println ( "4 - Delete entry from contact detail list" );
System.out.println ( "5 - Search cotact detail list" );
System.out.println ( "Q - Quit" );
System.out.print ( "Option : " );
userSelection = Text.readChar ( "Enter option" );
while ( userSelection != 'Q' & userSelection != 'q' )
switch ( userSelection )
case '1': activeEntries=0 ;
break;
case '2': if (activeEntries > 0)//IF contact detail list contains entries
System.out.println("\tEnrolment Number\tFirst Name\tSecond Name\tTelephone Number");
for (int i = 0; i<activeEntries; i ++)//FOR each stored contact
{//DO
System.out.println();
System.out.println("\t"+En[i]+"\t"+"\t"+FName[i]+ Lname[i]+"\t"+"\t"+PhoneNo);//Display one/current contact detail
}//END-FOR
else
{// ELSE
System.out.println("Contact detail list empty");//Display �Contact detail list empty� message
}//END-IF
break;
case '3': if(activeEntries<maxStudents)
En[activeEntries]= Text.readString("Enter enrolment number");
found = false;
int i = 0;
while ( !found && i < activeEntries)
if (En[i].equals(En[activeEntries]) )
found = true;
else
i++;
}//end-if
}//end-while
if (found == false)
FName[activeEntries]=Text.readString("Enter first name");
Lname[activeEntries]=Text.readString("Enter last name");
PhoneNo[activeEntries]=Text.readString("Enter telephone number");
// Insert new contact details into contact detail list
activeEntries++;
else
System.out.println("Enrolment number already exists");
else
System.out.println("Contact detail list full");
break;
case '4': Text.showMessage("Selected Option 4");
break;
case '5':Text.showMessage("Selected option 5");
default: Text.showMessage("invalid selection, Please input a valid option");
break;
}//switch
userSelection = Text.readChar ( "Enter option" );
}//while
System.exit(0);
}//main
}//StudentContactManager
//===============================================================================
I need help with case 4 and case 5...the search option should include while statement. and the 5th case is the delete option
Thanks guys =).

Please use the code tags when posting code (there is a button on the posting page for them). It would also help if you told us what you are trying to do, what error you are getting, and what you expect to get.
If you are just asking us to write the code for you, then you are in the wrong place.

Help with Title and Author Displaying on the iBooks Bookshelf.

I have created a book using iBooks Author and connected my iPad to my iMac to Preview my book, the book previews correctly the information I have entered into iBooks Author, however when you look on the iBooks Bookshelf it says UNKNOWN TITLE and UNKNOWN ARTIST even though I have entered this on my title page in iBooks Author, however the icon of my book on the iBooks Bookshelf is showing correctly the photo on the cover and the title and author, can any one help with this please?
Also no Category is showing against my book onthe iBooks Bookshelf how do I add one please?

To be honest, you should really put this under a seperate post of your own, but I'm not here to whine...
It sounds that you haven't defined the book title yet.
Open your book in iBooks Author and go to the panel on the left-hand side of your screen that shows your page thumbnails. Scroll to the top of this box, and find the panel that has the:
Book Title
Intro media
Table of contents
Glossary.
If your Book Title here says simply 'Book Title', then define it by double-clicking on the 'Book Title' text in the thumnails panel, and type in your book's title.
HTH.

Thumbnail titles and search options help

Similar Messages

Maybe you are looking for