Ticking the 'portal vendor' in SRM not triggering the XML message in SRM?
Dear experts,
I have ticked the 'portal vendor' in the supplier master data in SRM.
I have maintained the output medium as 'XML\XI'.
The 'permit surrogate bidding' button is unticked.
Then, I have saved the supplier master data successfully.
Still no XML message is generated for the supplier transfer to PI in the transaction SXMB_MONI.
Could you please comment what things I should look for?
Thanks and regards,
Ranjan
Dear Nikhil/Soumyaprakash,
The XML message was not generated from the SRM system due to missing config details in the 'define system landscape directory' in the SRM system.
Now, The SRM system is generating the XML message for supplier transfer. The PI system is successfully processing the messages. On the receiver side, the SUS system is also successfully processing the message.
However, no supplier is created under the root vendor organization in SUS system. No mail is also triggered. I have also maintained the vendor and porg details in the table 'BBP_MARKETP_INFO'.
Could you please check if anything is needed to trigger the creation of vendor record in SUS?
Thanks in advance,
Ranjan
Ranjan Sutradhar
Similar Messages
-
Motion sensor not triggering the alarm
hi mbeijen, I just noticed that I had an email from you on the Xfinity site. I got the code, tried it and it worked. Thank you so much! As a matter of fact, the technician already set the frontdoor motion sensor to 24-Hour Inform mode, just i didn't know about it. The next thing I need to do is confirming the frontdoor motion sensor would not trigger the alarm.
Just go to the settings, type in the installer code, then enter your initials, and voila When you enter the installer code instead of your main code it will open up the settings with different options. Just remember, if you break it, you own both pieces
-
The Favorite Content Portlet could not be populated.Error Message
Hi all,
I am new in PORTAL, I made an Instant portlet which was working fine. But then started an error occuring when I view the Portal Page: "The Favorite Content Portlet could not be populated.Error Message." This error is show in a dialog box when ever I view page or navigate to other tabs(subpages) of portal.
When I diagnose I got that this error is in "Main Navigator". If I delete the Main Navigator from Portal this error does not occur. But without Navigator subpages(tabs) cannot be visible.
This is the case when I make new INSTANT PORTAL. Please Help urgent!!!!!!!!!!!!
Thanks,
FahimI strongly recommend upgrading to the 3.0.9 release (iAS
1.0.2.2) with the 3.0.9.8.2 patch (this patch should be
available for NT/2000 this week). Also, the database should be
running 8.1.7.1 (or later), as explained in the iAS release
notes.
Regards,
Jerry -
I need to convert PDF file to Word Document, so it can be edited. But the recognizing text options do not have the language that I need. How I can convert the file in the desired of me language?
The application Acrobat provides no language translation capability.
If you localize the language for OS, MS Office applications, Acrobat, etc to the desired language try again.
Alternative: transfer a copy of content into a web based translation service (Bing or Google provides a free service).
Transfer the output into a word processing program that is localized to the appropriate language.
Do cleanup.
Be well... -
Hi
I have an uploading problem to the server. The problem is when I try to upload a file it goes through the correct proceedure,
but does not change the remote file i.e.Index.htm, or three stages1.htm.
My Localroot folder is C:\Gods Plan Web\
The site map layout is C:\Gods Plan Web\Index.htm
The folder for the remote site is /public_html/
Should the local root folder mirror the remote site, i.e./public_html/
if this is so, what should I put into the
(a) Local Root Folder box?
(b) site map layout box?
The FTP is performing well other than changing the intended file.You should be uploading only the contents of your local root to the public_html folder (remote root).
The index.html you use as your site's home page needs to be in your site root. If you look at your Files window in DW, you should have something like the following...
Site - Whatever you named your site
index.html
images
pages
page1.html
page2.html
If you have any folder between Site - and the index.html page, like...
Site - Whatever you named your site
mywebsite
index.html
It will upload to the public_html while still in that folder, so to find your page online, you would need to type something like...
www.mydomain.com/mywebsite
public_html should NOT appear within your local files and if it existed there, would cause a redundancy if uploaded. You would need to type www.yourdomain.com/public_html to see the uploaded pages.
If you could post a screen shot of your expanded Files window while connected to the server (just connect and click the Expand button in Files, don't drill down into any of the directories), we may be able to see the issue. -
I have installed iOS7 on my iPhone4. I am able to add/edit contacts by clicking the "contact" icon. But when I am trying to do the same after clicking the "phone" icon, it is not displaying the keypad. I believe it is a bug in iOS7.
Please confirm.
iPhone 4, iOS 7Hello jayanand,
You may need to force close all open apps, then restart the phone. If necessary, you may need to reset the phone after that.
iOS: Force an app to close
http://support.apple.com/kb/HT5137
iPhone, iPad, iPod touch: Turning off and on (restarting) and resetting
http://support.apple.com/kb/HT1430
Cheers,
Allen -
hi... can someone please help me.. i want to download the latest ios, but do not have the software update option in the general settings....
Connect it to iTunes on a computer and update it from there.
(73609) -
was making the update for my iphone 4s . then he stops. My phone in this time is in the recovery mode and do not take the firmware to open my phone, please can u help me to recover my phone. My current ios 6.0.1. plese send me some thing that is useful
Thanks for that 'sberman' - because my iPhone is backed-up to my work computer (only at this stage) I have had to call our IT Department in Adleaide. (4 times this morning). The last guy managed to get the phone into 'DFU Mode' - no more recovery mode screen - (kind of 'asleep' perhaps) from my understanding of same. I am awaiting a call again from IT so they can get my computer to actually recognise my iPhone on the C Drive. This also happened to one of my colleagues in Newman (WA). She got so frustrated with the whole process that she bought another phone the next time she was in 'civilisation.' She hasn't had any problems since. (Cross fingers).
Thanks again, Sandra2474. -
I have another apple ID but I forgot the password and apple does not send the link to reset it to my email. What do I do to have it back? It is really important.
If you know the answers to your security question for the ID you can use that method to reset the password rather than email (by going to https://iforgot.apple.com/password/verify/appleid).
If you don't, you'll have to contact iTunes Store support for assistance: http://www.apple.com/emea/support/itunes/contact.html. They frequently deal with Apple ID issues. -
When I have video clips on my timeline, they do not play in the monitor screen. I hear the sound track but can not see the image. To test if my new files are somehow the problem, I went back and used video files that I used successfully a year ago, and they no longer play in the monitor window. I hear the sound track, but do not see any video. Have I changed some setting that controls video playback in the monitor window?
Randy Ruttger
Thanks for the follow up.
Missing in this equation were the version of Premiere Elements that you were using and the computer operating system on which it was running. But...
The deed is done. But.....Until now and after you went ahead and moved to version 12, we now learn what version of Premiere Elements you were using. We still do not know the computer operating system involved.
You just said Premiere Elements 10. Premiere Elements 10 is hit by a serious known display issue if the computer uses a NVIDIA GeForce video card/graphics card. In this issue, the only remedy is to roll back the driver version to about May 2013. The description of the problem and how to do the roll back are described in one of the Announcements at the top of this forum. What video card/graphics card does your computer use?
On another front, Adobe will be releasing a new version of Premiere Elements any day now. No one but Adobe knows the feature set for the new version. That type of information is announced at the moment of release of the new version.
So the remedy to the problem that you presented in this thread could have been...
1. Rolling back the NVIDIA GeForce driver version to about May 2013 if possible (Windows 8 or 8.1 64 bit, may not be possible)
2. Move to another version of Premiere Elements (which you did)
I offer the above for consideration so that you can review your decisions. We are pleased to learn that Premiere Elements 12/12.1 works for you.
Please do not hesitate to ask questions and ask for clarifications, but remember that the answers are in the details.
Best wishes,
ATR -
itunes 11.1.3.8 shows a speaker icon in front of the seclection but it is not playing. the progress bar does not move. there are speakers attached to the system and all other programs do profuce an audio output.
Go to the Edit -> Preferences-> Playback
In The bottom section of the page click the drop down menu by Play Audio Using and select Windows Audio Session or something other than "Direct sound" or whatever it displays. Click Okay. This worked for me! I hope it works for you too!
Thanks,
John -
Since updating OS to Mountain Lion from leopard, I get the following error message when trying to backup with time machine on external drive. "Could not complete backup to media share. The network backup disk does not support the required AFP features." What are AFP features and how do I get Time Machine to backup to my current external backup?
This means that your NAS does not support the required encryption. Update your NAS to the latest firmware or ditch it and buy a Time Capsule (they are the most reliable when using TM).
-
How do I back up the calendar and contacts from my iPhone5 to my new macbook pro(10.8.3)? I have backed up the phone, but it does not transfer the calendar or the contacts. If I check them in the sync area and then back up the phone again will they transfer or be erased? I am a bit gun shy since my previous macbook pro committed suicide and I lost a ton of info there.
Copy everything from your backup copy of your old computer.
-
I have an iMac that I am running OSX 10.8.3 on. I keep trying to install 10.8.4 but it will not install. I tried updating and installing several times and it restarts the computer but it will not install the software. My machine is about 8 months old so, it's in the newish range. HELP!
Sometimes the App Store version doesn't work correctly. In this case, install 10.8.4 with the Combo version > http://support.apple.com/kb/DL1659?viewlocale=en_US&locale=en_US
The Combo installer is the safest way to update OS X, and it allows you to update more than one computer with a single download -
While trying to setup a time capsule backup to my MyBookLive external drive, I got the following error message: The network backup disk does not support the required AFP features. What's up with this?
This means that your NAS does not support the required encryption. Update your NAS to the latest firmware or ditch it and buy a Time Capsule (they are the most reliable when using TM).
Maybe you are looking for
-
I have selected my website as safe. While on the site I fill out a form, then when going to the next page to view results, Firefox says I've been logged out. I hit the back button and go back to the form fill in page. It will not take me to the page
-
IPhone 3GS - Seriously - How Good?
Ok, had a Nokia N97, and if I had any hair, it would have been all pulled out at this stage. Terrible terrible handset, no support from the retailer ( here in Saudi ) and jaw droppingly shocking Customer care from Nokia. Please don't be offended when
-
Signature text not picked up in standard correspondence SAP10
Hello FI experts There is a requirement in my project to send standard letters to vendors and cutomers. I have doen all the settings, correspondence type, form etc.has been done; but the signature text is not picked up in the form. I have dfefined th
-
Why does my I phone 5s freeze downloading
About 3/4 times a day my phone just stops downloading. Until I restart it, I can't Facebook, tweet or use safari. Any ideas? Please?
-
Transport/Export/Import Role Assignments
Hi all, it´s possible to transport, export or import role assignments from one portal to another? we implement a testsystem for our customer and want to copy all role assignments from all users from productive to testsystem. best regards Christian