Tiger 10.4.8 running one computer very slow...
I have 2 main computers in my photography studio. Running all with Tiger
10.4.8.
One is a powerbook G4 with 17" screen. This one seems to be running OK.
The other is a G4 tower (733 processor - memory 1GB) and this computer seems to be running all apps very slow (Photoshop, Appleworks, printing, saving files ect.). I have begun have begun having problems on 'start-up' of a 'gray screen' saying I have to restart the computer (not exact on what it says but sure you all have seen it before...).
I run 'cocktail', 'disk warrior', 'techtool deluxe' and the 'disk utility' on a regular basis (at least once a week) and they don't seem to help.
I have 2 firewire external HD's hooked up to it (got alot of photos to work with).
Am wondering if anyone else is having a problem since updating to 10.4.8 or if the HD is just getting ready to end it's life?
Any help is appreciated!!!
1. You wrote: "I have been running cocktail, disk warrior, disk utility and techtool deluxe everyday and have not had the kernal panic issue in the last few days. So I think that issue has been cleared up."Hard to say without seeing the panic logs as to what may have caused the panic. If they return, follow the troubleshooting road map in my "Resolving Kernel Panics" FAQ.
2. You wrote: "Photoshop CS2, Bridge and even Appleworks (which I don't use all that often) is still running very, very slow. "Some additional suggestions:• See the "Troubleshooting performance problems" section of my "Tuning Mac OS X Performance" FAQ.
• An errant Startup or Login Item maybe the cause on the affected computer. My "Troubleshooting Startup and Login Items" FAQ can help you pin that down if such an item is causing the problem.
• Try troubleshooting the FireWire drives by process of elimination: try running without them, then one of them, then the other. If the problem occurs when one of the FireWire drives is connected, it could be a problem with the FireWire drive, the cable, or the FireWire port.
• To rule out broader hardware problems with the Mac itself, run the Apple Hardware Test (AHT) that came the affected computer. See my "Apple Hardware Test" FAQ for comprehensive advice on using the AHT in troubleshooting.3. You wrote: "Do you think that my HD (running the operating system) is just slowly beginning to die??? "You can rule that out by checking its SMART status. See Step 1 of the Procedure in my "Resolving Disk, Permission, and Cache Corruption" FAQ if you need step-by-step instructions.
Good luck!
Dr. Smoke
Author: Troubleshooting Mac® OS X
Note: The information provided in the link(s) above is freely available. However, because I own The X Lab™, a commercial Web site to which some of these links point, the Apple Discussions Terms of Use require I include the following disclosure statement with this post:
I may receive some form of compensation, financial or otherwise, from my recommendation or link.
Similar Messages
-
Problem description:
Computer very slow….and unresponsive
EtreCheck version: 2.1.8 (121)
Report generated April 16, 2015 at 10:19:42 AM EDT
Download EtreCheck from http://etresoft.com/etrecheck
Click the [Click for support] links for help with non-Apple products.
Click the [Click for details] links for more information about that line.
Hardware Information: ℹ️
MacBook Pro (15-inch, Mid 2012) (Technical Specifications)
MacBook Pro - model: MacBookPro9,1
1 2.3 GHz Intel Core i7 CPU: 4-core
4 GB RAM Upgradeable
BANK 0/DIMM0
2 GB DDR3 1600 MHz ok
BANK 1/DIMM0
2 GB DDR3 1600 MHz ok
Bluetooth: Good - Handoff/Airdrop2 supported
Wireless: en1: 802.11 a/b/g/n
Battery Health: Normal - Cycle count 412
Video Information: ℹ️
Intel HD Graphics 4000
NVIDIA GeForce GT 650M - VRAM: 512 MB
Color LCD 1440 x 900
System Software: ℹ️
OS X 10.10.2 (14C1514) - Time since boot: 7 days 18:4:45
Disk Information: ℹ️
APPLE HDD HTS547550A9E384 disk0 : (500.11 GB)
EFI (disk0s1) <not mounted> : 210 MB
Recovery HD (disk0s3) <not mounted> [Recovery]: 650 MB
Macintosh HD (disk1) / : 498.88 GB (299.54 GB free)
Core Storage: disk0s2 499.25 GB Online
MATSHITADVD-R UJ-8A8
USB Information: ℹ️
Western Digital My Passport 0748 500.07 GB
EFI (disk3s1) <not mounted> : 210 MB
My Passport (disk3s2) /Volumes/My Passport : 499.73 GB (126.16 GB free)
Apple Inc. FaceTime HD Camera (Built-in)
Apple Inc. BRCM20702 Hub
Apple Inc. Bluetooth USB Host Controller
Apple Inc. Apple Internal Keyboard / Trackpad
Apple Computer, Inc. IR Receiver
Thunderbolt Information: ℹ️
Apple Inc. thunderbolt_bus
Gatekeeper: ℹ️
Mac App Store and identified developers
Kernel Extensions: ℹ️
/System/Library/Extensions
[not loaded] com.quark.driver.Tether (1.1.0d4 - SDK 10.4) [Click for support]
[loaded] com.quark.driver.Tether64 (1.1.0d3 - SDK 10.6) [Click for support]
[not loaded] com.wdc.driver.1394HP (1.0.11 - SDK 10.4) [Click for support]
[not loaded] com.wdc.driver.1394_64HP (1.0.1 - SDK 10.6) [Click for support]
[not loaded] com.wdc.driver.USBHP (1.0.11) [Click for support]
[loaded] com.wdc.driver.USB_64HP (1.0.0 - SDK 10.6) [Click for support]
Problem System Launch Agents: ℹ️
[killed] com.apple.CallHistoryPluginHelper.plist
[killed] com.apple.CallHistorySyncHelper.plist
[killed] com.apple.gamed.plist
[killed] com.apple.Maps.pushdaemon.plist
[killed] com.apple.printtool.agent.plist
[killed] com.apple.telephonyutilities.callservicesd.plist
6 processes killed due to memory pressure
Problem System Launch Daemons: ℹ️
[killed] com.apple.awdd.plist
[killed] com.apple.ctkd.plist
[killed] com.apple.emond.aslmanager.plist
[killed] com.apple.nehelper.plist
[killed] com.apple.wdhelper.plist
[killed] com.apple.xpc.smd.plist
6 processes killed due to memory pressure
Launch Agents: ℹ️
[not loaded] com.adobe.AAM.Updater-1.0.plist [Click for support]
[loaded] com.coupons.coupond.plist [Click for support]
[running] com.mcafee.menulet.plist [Click for support]
[running] com.mcafee.reporter.plist [Click for support]
[running] com.oracle.java.Java-Updater.plist [Click for support]
[loaded] org.macosforge.xquartz.startx.plist [Click for support]
Launch Daemons: ℹ️
[failed] com.adobe.fpsaud.plist [Click for support]
[loaded] com.adobe.SwitchBoard.plist [Click for support]
[loaded] com.macpaw.CleanMyMac2.Agent.plist [Click for support]
[unknown] com.mcafee.ssm.ScanFactory.plist [Click for support]
[unknown] com.mcafee.ssm.ScanManager.plist [Click for support]
[running] com.mcafee.virusscan.fmpd.plist [Click for support]
[loaded] com.microsoft.office.licensing.helper.plist [Click for support]
[loaded] com.oracle.java.Helper-Tool.plist [Click for support]
[loaded] com.oracle.java.JavaUpdateHelper.plist [Click for support]
[loaded] org.macosforge.xquartz.privileged_startx.plist [Click for support]
User Launch Agents: ℹ️
[loaded] com.adobe.AAM.Updater-1.0.plist [Click for support]
[loaded] com.facebook.videochat.[redacted].plist [Click for support]
[failed] com.facebook.videochat.[redacted].plist [Click for support]
[loaded] com.google.keystone.agent.plist [Click for support]
[loaded] com.macpaw.CleanMyMac2Helper.diskSpaceWatcher.plist [Click for support]
[loaded] com.macpaw.CleanMyMac2Helper.scheduledScan.plist [Click for support]
[loaded] com.macpaw.CleanMyMac2Helper.trashWatcher.plist [Click for support]
User Login Items: ℹ️
iTunesHelper Application (/Applications/iTunes.app/Contents/MacOS/iTunesHelper.app)
WDSecurityHelper UNKNOWN (missing value)
WDSecurityHelper Application (/Applications/WD Security.app/Contents/WDSecurityHelper.app)
WDDriveUtilityHelper UNKNOWN (missing value)
WDDriveUtilityHelper Application (/Applications/WD Drive Utilities.app/Contents/WDDriveUtilityHelper.app)
Internet Plug-ins: ℹ️
SiteAdvisor: Version: 2.0 - SDK 10.1 [Click for support]
FlashPlayer-10.6: Version: 17.0.0.169 - SDK 10.6 [Click for support]
QuickTime Plugin: Version: 7.7.3
Flash Player: Version: 17.0.0.169 - SDK 10.6 [Click for support]
CouponPrinter-FireFox_v2: Version: 5.0.3 - SDK 10.6 [Click for support]
Default Browser: Version: 600 - SDK 10.10
SharePointBrowserPlugin: Version: 14.4.8 - SDK 10.6 [Click for support]
Silverlight: Version: 5.1.30514.0 - SDK 10.6 [Click for support]
JavaAppletPlugin: Version: Java 8 Update 31 Check version
User internet Plug-ins: ℹ️
Google Earth Web Plug-in: Version: 7.1 [Click for support]
Stamps.com: Version: 1.1.13 [Click for support]
DISH Anywhere Player: Version: 2.7.2.0 [Click for support]
Safari Extensions: ℹ️
SiteAdvisor
3rd Party Preference Panes: ℹ️
Flash Player [Click for support]
Java [Click for support]
Time Machine: ℹ️
Skip System Files: NO
Mobile backups: ON
Auto backup: YES
Volumes being backed up:
Macintosh HD: Disk size: 498.88 GB Disk used: 199.33 GB
Destinations:
My Passport [Local]
Total size: 499.73 GB
Total number of backups: 29
Oldest backup: 2013-05-17 22:06:43 +0000
Last backup: 2015-03-27 16:16:56 +0000
Size of backup disk: Too small
Backup size 499.73 GB < (Disk used 199.33 GB X 3)
Top Processes by CPU: ℹ️
6% backupd
5% WindowServer
1% Google Chrome
1% loginwindow
1% mtmd
Top Processes by Memory: ℹ️
289 MB Google Chrome Helper
189 MB Google Chrome
84 MB backupd
78 MB Mail
77 MB Finder
Virtual Memory Information: ℹ️
17 MB Free RAM
1.22 GB Active RAM
1.22 GB Inactive RAM
996 MB Wired RAM
54.55 GB Page-ins
1.93 GB Page-outs
Diagnostics Information: ℹ️
Apr 14, 2015, 03:11:54 PM /Library/Logs/DiagnosticReports/softwareupdated_2015-04-14-151154_[redacted].cp u_resource.diag [Click for details]When you see a beachball cursor or the slowness is especially bad, note the exact time: hour, minute, second.
These instructions must be carried out as an administrator. If you have only one user account, you are the administrator.
Launch the Console application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad and start typing the name.
The title of the Console window should be All Messages. If it isn't, select
SYSTEM LOG QUERIES ▹ All Messages
from the log list on the left. If you don't see that list, select
View ▹ Show Log List
from the menu bar at the top of the screen.
Each message in the log begins with the date and time when it was entered. Scroll back to the time you noted above.
Select the messages entered from then until the end of the episode, or until they start to repeat, whichever comes first.
Copy the messages to the Clipboard by pressing the key combination command-C. Paste into a reply to this message by pressing command-V.
The log contains a vast amount of information, almost all of it useless for solving any particular problem. When posting a log extract, be selective. A few dozen lines are almost always more than enough.
Please don't indiscriminately dump thousands of lines from the log into this discussion.
Please don't post screenshots of log messages—post the text.
Some private information, such as your name, may appear in the log. Anonymize before posting.
When you post the log extract, you might see an error message on the web page: "You have included content in your post that is not permitted," or "The message contains invalid characters." That's a bug in the forum software. Please post the text on Pastebin, then post a link here to the page you created. -
Hi every one.
I have 2.4 GHz Intel Core 2 Duo makbook. I upgraded to os x yersme. Now I am stuck and wondering why i did this as it made my computer very slow. stating time increased, some feature disappeared and I cannot save document In my hard drive using office. I do not want this any more. but the problem is i forgot my old software name. is any one know which would be that preinstalled software name. B. how can i go back to it with less hassle as I am not much of computer person.
thanksActivity Monitor - Mavericks also Yosemite
Activity Monitor in Mavericks has significant changes
Performance Guide
Why is my computer slow
Why your Mac runs slower than it should
Slow Mac After Mavericks
Things you can do to resolve slowdowns see post by Kappy
6 Easy Tips to Speed Up OS X Yosemite on Your Mac
Do a backup, preferably 2 separate ones on 2 separate drives.
Revert to a Previous OS X - Yosemite
Revert Yosemite to Mavericks
If you do revert, I'd use Setup Assistant to restore your data. This process takes a while, so do it when you won't need the computer for several hours, based on my experience. -
Adobe CC Lightroom en Photoshop installed, only now computer very slow in comparance to Lightroom 5.7, how can i get it faster....? I work on Win 7 Ultimate.
Try to follow below steps
Click on Finder and then hold Command + Shift + G keys on your keypad
It will open Go to folder window, type exactly ~/Library and click on Go
Then open Application Support > Adobe folders
Trash AAMUpdater and OOBE folders.
Now click on finder and hold Command + Shift + G keys on your keypad.
This time type /Library and click on Go.
Make sure to remove ~ symbol.
Then open Application Support > Adobe folders.
Trash AAMUpdater, Adobe Application manager, OOBE folders.
Now Click on Finder and then hold Command + Shift + U keys on your keypad.
It will open utilities folder.
Trash Adobe Creative Cloud and Adobe Application Manager folders
Download and Run CC cleaner tool from below link
http://helpx.adobe.com/creative-suite/kb/cs5-cleaner-tool-installation-problems/_jcr_conte nt/main-pars/accordion_container_1/accordion-par/accordion-item-1/accordion-item-par/proc e dure/proc_par/step_3/step_par/download/file.res/AdobeCreativeCloudCleanerTool.zip
Accept the license agreement and click on Adobe Application Manager
Then click on clean up selected
Close the window
Download and install Creative Cloud App from below link
Free Creative Cloud | Download Adobe Creative Cloud free trial -
After 10.5.2 update, computer very slow
Downloaded/installed update without incident. Microsoft Office programs are now very slow to open and very slow to perform certain tasks, like trashing an email. Emptying trash in the Finder sometimes works/sometimes doesn't. When it doesn't, I get a dialog box saying "You can't open Trash because Trash is being emptyed" or words to that effect. Force quitting hung aps usually does not work. It is sometimes possible to shut down or restart using the commands in the Apple menu but I've had to just power cycle the computer twice today when the commands didn't work. I tried verifying permissions but even that seemed to hang. Verifying the disk worked and it says the disk is ok. Any ideas on how to solve this? It almost feels like I've run out of memory but Activity Monitor says otherwise. Stumped.
I had some of the exact same issues. After I installed the 10.5.2 update and noticed these issues, I ran Software Update again and found a "Leopard Graphics Update 1.0".
http://www.apple.com/support/downloads/leopardgraphicsupdate10.html
Once I installed this graphics update, my computer was back to normal. -
Maverick is making my computer very slow
Can anyone please help me? Since upgrading from Snow Lepard to Maverick everything is very slow. Below is the EtreCheck report.
Thank you in advance.
Hardware Information:
MacBook (13-inch, Mid 2009)
MacBook - model: MacBook5,2
1 2.13 GHz Intel Core 2 Duo CPU: 2 cores
2 GB RAM
Video Information:
NVIDIA GeForce 9400M - VRAM: 256 MB
System Software:
OS X 10.9.2 (13C64) - Uptime: 0 days 0:58:40
Disk Information:
FUJITSU MHZ2160BH FFS G1 disk0 : (160.04 GB)
EFI (disk0s1) <not mounted>: 209.7 MB
Macintosh HD (disk0s2) / [Startup]: 159.18 GB (99.61 GB free)
Recovery HD (disk0s3) <not mounted>: 650 MB
HL-DT-ST DVDRW GS22N
USB Information:
Micron Built-in iSight
Apple Inc. Apple Internal Keyboard / Trackpad
Apple Computer, Inc. IR Receiver
Apple Inc. BRCM2046 Hub
Apple Inc. Bluetooth USB Host Controller
FireWire Information:
Thunderbolt Information:
Startup Items:
PenTabletDriver: Path: /Library/StartupItems/PenTabletDriver
Launch Daemons:
[System] com.google.keystone.daemon.plist 3rd-Party support link
[System] com.trusteer.rooks.rooksd.plist 3rd-Party support link
Launch Agents:
[System] com.google.keystone.agent.plist 3rd-Party support link
[System] com.trusteer.rapport.rapportd.plist 3rd-Party support link
User Launch Agents:
[not loaded] [email protected]
[not loaded] com.spotify.webhelper.plist 3rd-Party support link
User Login Items:
iTunesHelper
Skype
Android File Transfer Agent
Dropbox
PenTabletDriver
Internet Plug-ins:
Default Browser: Version: 537 - SDK 10.9
NP_2020Player_IKEA: Version: 5.0.94.0 - SDK 10.6 3rd-Party support link
QuickTime Plugin: Version: 7.7.3
DivXBrowserPlugin: Version: 2.0 3rd-Party support link
o1dbrowserplugin: Version: 5.2.4.18058 3rd-Party support link
CitrixICAClientPlugIn: Version: 11.2.0 3rd-Party support link
googletalkbrowserplugin: Version: 5.2.4.18058 3rd-Party support link
Silverlight: Version: 5.1.20513.0 - SDK 10.6 3rd-Party support link
iPhotoPhotocast: Version: 7.0
Audio Plug-ins:
BluetoothAudioPlugIn: Version: 1.0 - SDK 10.9
AirPlay: Version: 2.0 - SDK 10.9
AppleAVBAudio: Version: 203.2 - SDK 10.9
iSightAudio: Version: 7.7.3 - SDK 10.9
iTunes Plug-ins:
Quartz Composer Visualizer: Version: 1.4 - SDK 10.9
3rd Party Preference Panes:
Citrix Online Plug-in 3rd-Party support link
DivX 3rd-Party support link
Growl 3rd-Party support link
Rapport 3rd-Party support link
Old Applications:
Microsoft AutoUpdate: Version: 2.3.6 - SDK 10.4 3rd-Party support link
/Library/Application Support/Microsoft/MAU2.0/Microsoft AutoUpdate.app
SLLauncher: Version: 1.0 - SDK 10.5 3rd-Party support link
/Library/Application Support/Microsoft/Silverlight/OutOfBrowser/SLLauncher.app
iSkysoft Video Converter: Version: 2.5.2 - SDK 10.5 3rd-Party support link
FaceboxPro: Version: 2.1 - SDK 10.0 3rd-Party support link
Spotify: Version: 0.8.4.124.ga3559d86 - SDK 10.5 3rd-Party support link
/Users/[redacted]/Downloads
Install Spotify: Version: 1.0 - SDK 10.5 3rd-Party support link
Xtorrent: Version: 2.1 - SDK 10.5 3rd-Party support link
Time Machine:
Time Machine not configured!
Top Processes by CPU:
14% WindowServer
2% Google Chrome
1% EtreCheck
0% ps
0% Dropbox
Top Processes by Memory:
221 MB helpd
92 MB Google Chrome Helper
72 MB Google Chrome
37 MB mds_stores
29 MB Finder
Virtual Memory Information:
16 MB Free RAM
575 MB Active RAM
568 MB Inactive RAM
298 MB Wired RAM
1.50 GB Page-ins
406 MB Page-outsUn-install Trusteer. It doesn't play nicely on Macs.
Trusteer Rapport Uninstall
Activity Monitor - Mavericks
Activity Monitor in Mavericks has significant changes
Performance Guide
Why is my computer slow
Why your Mac runs slower than it should
Slow Mac After Mavericks
Things you can do to resolve slowdowns see post by Kappy
The 2 places I’ve seen recommended most to buy reliable RAM are below. I have purchased RAM several times from Other World Computing and have always been very satisfied with the product and service.
Crucial
Other World Computing -
Doubts about going back to Leopard because lion made the computer very slow
hi i bought a macbook pro on 2009 it came with leopard operating system. When lion came into the market i installed it but since then the computer is very slow.
I took it to an apple sotre and they told me that the memory was almost full so i bought an external hard drive where i have now all my music, photos and documents. But the computers is still very slow.
So im thinking about going back to leopard but i have some questions. i hope someone here help me
1. will i experience any problem synchronizing my iphone 5 or my ipad4?
2. will i be able to update itunes to the last version?
3. how shall make a backup of my computer
4. What do i have to do to restore leopard into my computer
thanks!How much RAM does it have..?
To find out, go up on your menu bar to: Apple > About This Mac
If you have no other problems and plenty of free HDD space? Then 2GB of RAM will feel real slow running multiple Apps in Lion or Mountian Lion and you should try upgrading the RAM 4GB or more before moving back to Snow Leopard.
see > MacBook, MacBook Pro ‘Unibody’ DDR3 Memory + Free Installation Videos -
Joomla website running from Azure very slow
I have migrated a Joomla website to windows Azure and it is running really slow (despite being a temp URL with only me connecting to it) compared to the previous hosting. The site is scaled up to standard with 2 CPUs and runs from a free cleardb
MySQL database (as created by the Azure Joomla wizard). I have tried everything (following guides on speeding up Joomla) to speed it up but nothing works. I am suspicious of the free cleardb database connection and raised a support question with them but they
were useless.
Is Microsoft's flagship Azure hosting really this bad? Has anyone else had problems with speed (particularly if connecting to a cleardb SQL database)?
My test URL is: http://rmjoomla.azurewebsites.netThanks Brenton,
That's interesting that it is responsive on the US. Apparently the website and database are hosted in Northern Europe (Dublin for Azure and not sure where database is exactly) and I am based in UK. I have checked it across different connections but
it just seems slow (sometimes 10s plus to load a page). The only thing I haven't tried is upgrading the database but since I am the only connection I am not convinced this will help.
There may be another option you need to check... Make sure the Website is AlwaysOn.. and Azure doesn't tear down the website due to inactivity.
https://social.msdn.microsoft.com/Forums/azure/en-US/5c822101-98ab-460d-94c9-d1ebb555d549/azure-website-very-slow-performance-nz?forum=windowsazurewebsitespreview
Entrepreneur, Strategic Technical Advisor, and Sr. Consulting Engineer - Strategic Services and Solutions Check out my book - Powershell 3.0 - WMI: http://amzn.to/1BnjOmo | Mastering PowerShell Coming in April 2015! -
Computer very slow and programs crash....
My Dual 2.5 has been doing very wierd things lately. First off, the processors and fans work very hard to do simple things like Safari. Second, programs for example Photoshop crash when I try to open them, but work the second time. Thirdly, sometimes when I turn on my computer it stays on a black screen and the fans rev to full speed.
I have updated to 10.4.4, repaired permissions, etc. etc. but nothing seems to help. Do I need to reinstall a fresh copy of Tiger, and if so what is the easiest way to save all my programs, pictures, music, files, etc.?
Thanks guys.Do a fresh install if your machine is having problems by the time you futz around you can be up and running again.
What you can do is this, get a external hard drive and clone your screwed up OS to it.
Then erase the internal and reinstall Tiger fresh using your same name, drive name and password, update and install apps from original sources, then simply replace folders like iTunes from the clone, contents of users folders, Safari bookmarks and email (in user Library), iPhoto folder and the like.
You can trim out the garbage you've installed over time, get a optimized OS and all the benifits.
Later when your done leaching off the clone, erase it and clone your new boot config to it for safekeeping, any trouble, boot off the clone.
I have some pretty good details and information, take the time to download and read the text files.
http://homepage.mac.com/hogfish
My Mac was refusing to allow a software intiated restart yesterday, so I simply transfered essential folders to my clone, booted off of it, updated the OS, erased my internal hard drive and reverse cloned. My OS is nicely optimized now and I got a bunch of free space.
It's zipping along nice and fast again. -
Mac running Yosemite now very slow with crashes
Can anyone help?
I'm running Yosemite 10.10.2 on a MacBook Air (Late 2010) and it's got progressively worse since upgrading from Mavericks.
I'm seeing unbelievably slow and sluggish behaviour across the system.
A reboot helps initially, but then it gets progressively worse again.
Lots of apps crashing too - most notably, Safari.
Mavericks ran like a dream, but Yosemite is awful. It makes me think I've got something installed somewhere that is incompatible and dragging the whole OS down.
Thought it might be useful to post an EtreCheck ( http://etresoft.com/etrecheck). Can anyone help diagnose the problem?
Thanks in advance!
(See report below):
EtreCheck version: 2.1.8 (121)
Report generated 16 March 2015 14:25:20 GMT
Download EtreCheck from http://etresoft.com/etrecheck
Click the [Click for support] links for help with non-Apple products.
Click the [Click for details] links for more information about that line.
Hardware Information: ℹ️
MacBook Air (13-inch, Late 2010) (Technical Specifications)
MacBook Air - model: MacBookAir3,2
1 1.86 GHz Intel Core 2 Duo CPU: 2-core
2 GB RAM Not upgradeable
BANK 0/DIMM0
1 GB DDR3 1067 MHz ok
BANK 1/DIMM0
1 GB DDR3 1067 MHz ok
Bluetooth: Old - Handoff/Airdrop2 not supported
Wireless: en0: 802.11 a/b/g/n
Battery Health: Normal - Cycle count 554
Video Information: ℹ️
NVIDIA GeForce 320M - VRAM: 256 MB
Color LCD 1440 x 900
System Software: ℹ️
OS X 10.10.2 (14C109) - Time since boot: 10 days 5:35:16
Disk Information: ℹ️
APPLE SSD TS128C disk0 : (121.33 GB)
EFI (disk0s1) <not mounted> : 210 MB
Macintosh HD (disk0s2) / : 120.47 GB (24.01 GB free)
Recovery HD (disk0s3) <not mounted> [Recovery]: 650 MB
USB Information: ℹ️
Apple Inc. FaceTime Camera (Built-in)
Apple Inc. iPhone
Apple Internal Memory Card Reader
Apple Inc. Apple Internal Keyboard / Trackpad
Apple Inc. BRCM2070 Hub
Apple Inc. Bluetooth USB Host Controller
Gatekeeper: ℹ️
Mac App Store and identified developers
Kernel Extensions: ℹ️
/Applications/Transmit.app
[not loaded] com.panic.TransmitDisk.transmitdiskfs (4.0.0 - SDK 10.5) [Click for support]
/System/Library/Extensions
[not loaded] com.marvell.kext.USBGenericPrinterClass (1.0.0) [Click for support]
Problem System Launch Agents: ℹ️
[killed] com.apple.AirPlayUIAgent.plist
[killed] com.apple.CallHistoryPluginHelper.plist
[killed] com.apple.CallHistorySyncHelper.plist
[killed] com.apple.cmfsyncagent.plist
[killed] com.apple.coreservices.appleid.authentication.plist
[killed] com.apple.coreservices.uiagent.plist
[killed] com.apple.EscrowSecurityAlert.plist
[killed] com.apple.lookupd.plist
[killed] com.apple.Maps.pushdaemon.plist
[killed] com.apple.pluginkit.pkd.plist
[killed] com.apple.printtool.agent.plist
[killed] com.apple.recentsd.plist
[killed] com.apple.SafariNotificationAgent.plist
[killed] com.apple.sbd.plist
[killed] com.apple.scopedbookmarkagent.xpc.plist
[killed] com.apple.security.cloudkeychainproxy.plist
[killed] com.apple.syncdefaultsd.plist
[killed] com.apple.telephonyutilities.callservicesd.plist
18 processes killed due to memory pressure
Problem System Launch Daemons: ℹ️
[killed] com.apple.AssetCacheLocatorService.plist
[killed] com.apple.awdd.plist
[killed] com.apple.ctkd.plist
[killed] com.apple.diagnosticd.plist
[killed] com.apple.emond.aslmanager.plist
[killed] com.apple.GSSCred.plist
[killed] com.apple.icloud.findmydeviced.plist
[killed] com.apple.ifdreader.plist
[killed] com.apple.nehelper.plist
[killed] com.apple.periodic-daily.plist
[killed] com.apple.periodic-weekly.plist
[killed] com.apple.sandboxd.plist
[killed] com.apple.softwareupdate_download_service.plist
[killed] com.apple.tccd.system.plist
[killed] com.apple.wdhelper.plist
[killed] com.apple.xpc.smd.plist
[killed] org.cups.cupsd.plist
17 processes killed due to memory pressure
Launch Agents: ℹ️
[running] com.amazon.sendtokindle.launcher.plist [Click for support]
Launch Daemons: ℹ️
[loaded] com.adobe.fpsaud.plist [Click for support]
User Launch Agents: ℹ️
[failed] com.apple.SafariBookmarksSyncer.plist
[loaded] com.google.keystone.agent.plist [Click for support]
[running] com.hp.printerAgent.plist [Click for support]
User Login Items: ℹ️
Dropbox Application (/Applications/Dropbox.app)
Internet Plug-ins: ℹ️
JavaAppletPlugin: Version: 15.0.0 - SDK 10.10 Check version
FlashPlayer-10.6: Version: 16.0.0.305 - SDK 10.6 [Click for support]
QuickTime Plugin: Version: 7.7.3
Flash Player: Version: 16.0.0.305 - SDK 10.6 Outdated! Update
Default Browser: Version: 600 - SDK 10.10
OfficeLiveBrowserPlugin: Version: 12.3.6 [Click for support]
Silverlight: Version: 5.1.20125.0 - SDK 10.6 [Click for support]
iPhotoPhotocast: Version: 7.0 - SDK 10.7
User internet Plug-ins: ℹ️
RealPlayer Plugin: Version: Unknown [Click for support]
Safari Extensions: ℹ️
AllMyTube
Make It Short
3rd Party Preference Panes: ℹ️
Flash Player [Click for support]
Perian [Click for support]
Time Machine: ℹ️
Skip System Files: NO
Mobile backups: ON
Auto backup: YES
Volumes being backed up:
Macintosh HD: Disk size: 120.47 GB Disk used: 96.47 GB
Destinations:
Ben's Data [Network]
Total size: 997.71 GB
Total number of backups: 11
Oldest backup: 2015-01-24 23:52:11 +0000
Last backup: 2015-03-14 15:50:23 +0000
Size of backup disk: Excellent
Backup size 997.71 GB > (Disk size 120.47 GB X 3)
Top Processes by CPU: ℹ️
16% WindowServer
8% Mail
7% Activity Monitor
3% sysmond
1% launchservicesd
Top Processes by Memory: ℹ️
247 MB Mail
45 MB WindowServer
30 MB com.apple.WebKit.WebContent
24 MB Activity Monitor
15 MB CalNCService
Virtual Memory Information: ℹ️
201 MB Free RAM
375 MB Active RAM
334 MB Inactive RAM
681 MB Wired RAM
52.65 GB Page-ins
832 MB Page-outs
Diagnostics Information: ℹ️
Mar 16, 2015, 02:23:35 PM /Library/Logs/DiagnosticReports/com.apple.WebKit.WebContent_2015-03-16-142335_[ redacted].cpu_resource.diag [Click for details]
Mar 16, 2015, 10:58:37 AM /Library/Logs/DiagnosticReports/com.apple.WebKit.WebContent_2015-03-16-105837_[ redacted].cpu_resource.diag [Click for details]
Mar 14, 2015, 01:34:36 PM /Library/Logs/DiagnosticReports/installd_2015-03-14-133436_[redacted].cpu_resou rce.diag [Click for details]Launch the Console application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad and start typing the name.
Step 1
For this step, the title of the Console window should be All Messages. If it isn't, select
SYSTEM LOG QUERIES ▹ All Messages
from the log list on the left. If you don't see that list, select
View ▹ Show Log List
from the menu bar at the top of the screen.
In the top right corner of the Console window, there's a search box labeled Filter. Initially the words "String Matching" are shown in that box. Enter the name of the crashed application or process. For example, if Safari crashed, you would enter "Safari" (without the quotes.)
Each message in the log begins with the date and time when it was entered. Select the messages from the time of the last crash, if any. Copy them to the Clipboard by pressing the key combination command-C. Paste into a reply to this message by pressing command-V.
☞ The log contains a vast amount of information, almost all of which is irrelevant to solving any particular problem. When posting a log extract, be selective. A few dozen lines are almost always more than enough.
Please don't indiscriminately dump thousands of lines from the log into this discussion.
Please don't post screenshots of log messages—post the text.
☞ Some private information, such as your name, may appear in the log. Anonymize before posting.
Step 2
In the Console window, select
DIAGNOSTIC AND USAGE INFORMATION ▹ User Diagnostic Reports
(not Diagnostic and Usage Messages) from the log list on the left. There is a disclosure triangle to the left of the list item. If the triangle is pointing to the right, click it so that it points down. You'll see a list of crash reports. The name of each report starts with the name of the process, and ends with ".crash". Select the most recent report related to the process in question. The contents of the report will appear on the right. Use copy and paste to post the entire contents—the text, not a screenshot.
I know the report is long, maybe several hundred lines. Please post all of it anyway.
If you don't see any reports listed, but you know there was a crash, you may have chosen Diagnostic and Usage Messages from the log list. Choose DIAGNOSTIC AND USAGE INFORMATION instead.
In the interest of privacy, I suggest that, before posting, you edit out the “Anonymous UUID,” a long string of letters, numbers, and dashes in the header of the report, if it’s present (it may not be.)
Please don’t post other kinds of diagnostic report—they're very long and rarely helpful. -
RemoteFX configured and running - but still very slow
Hello!
The goal:
To install and test RemoteFX performance before purchase expensive server/vga.
The success so far:
installed and configured Windows 2008 R2 SP1 with Hyper-V
installed and configured Windows 7 Enterprice SP1 virtual machine with RemoteFX video adapter enabled
running Windows 7 SP1 client with the supported version (7.1) RDP
successful RDP connection and confirmed RemoteFX running (the shut down button + event with ID:2 on the VM and so on)
no errors/warnings in the event viewer, RDP client is 10mbit or more etc.. all settings seems to be perfect.
The hardware used (I know it's not a real server, but the idea is to "feel" the RemoteFX performance before purchase and for a single VM it's quite enough):
AMD 6800k (SLAT enabled) cpu
nVidia GTX560 1G GDDR5 (also tested with ATI R7 240 2G)
8g DDR3 2400mhz memory
The problem:
The performance is.. let say the same as with the normal RDP connection. Pretty much no difference.
I checked almost every problem on the internet related to the RemoteFX, but without a single log/message I just can't do more.
The VGA is not Quadro/FirePro.. but from what I saw, the people are just using normal cards without any problems and for test purposes should be fine.
I also tried to install the cap driver (dism / ...), without any difference (actually I'm not 100% sure that this is needed, can someone explain?).
I'll be happy if someone can point me the way I can "debug" it.
Best!So I was typing out a long detailed reply indicating how I was seeing exactly the same issues, and why I was pretty sure it was happening for all of us.
However, it now appears that I've been able to get it up and running pretty well. Like the OP, I am simply using desktop hardware at first to test it out but here's what I'm working with:
Windows Server 2012R2 with 8.1 Enterprise VM connecting using an 8.1 Pro machine.
AMD FX-8150
16GB DDR3
120GB SSD
Radeon HD6950 - 1GB
Asus M5A99X EVO R2.0 Motherboard
When I was seeing the issues you all are seeing, it was when RemoteFX was working fine. This was verified by dxdiag and openhardwaremonitor on the server itself watching the GPU utilization rise while rendering the fishbowl.
However, another thing I noticed was that due to the AMD software of desktops (what I have installed on the windows server itself), the CPU and GPU both clock down to conserve power. Because of this, the one VM wasn't enough to raise them both to max. Once
I forced the CPU and GPU to both stay at max frequency, everything runs pretty amazingly. VM is using 4 cores, No limit on RAM (hits about 4GB max), vGPU is set to 3 monitors at 1920x1080, and a 35GB chunk of the SSD. Here's what I see now:
HTML5 Fishbowl - Fullscreen at 1680x1050 on Auto makes it to 250 fish at 60FPS
HTML5 Fishbowl - Windowed at about 1/3rd size Auto makes it to 850 fish at 60FPS
Borderlands 2 - Able to install, use XBOX controller with USB Passthrough at about 25FPS at 1280x1024.
I would also like to point out that the biggest bottleneck it seems is actually the VM's ability to encode the data stream sending to the client at the far end. Evidence of this is shown by just taking a window and placing it over the fishbowl (I used the
task manager). Once you cover some of the fish, you'll see the framerate go up fairly significantly. (since not as many pixels are changing, and so there's less traffic to send).
Anyway, just thought I'd share! Hope you're all doing better on this! -
Problem with Java cache which makes the computer very slow.
Hello!
I think that Java has installed som code that creats problems to my processor when I am working with the computer.
I have got the following wrong code: 0x805 8023 and the containerfile & file below:
1) Containerfile C:\Users\Oskar\AppData\LocalLow\Sun\Java\Deployment\cache\6.0\11\37a4040b-62415be5
2) File C:\Users\Oskar\AppData\LocalLow\Sun\Java\Deployment\cache\6.0\11\37a4040b-62415be5->cuumfrsmeyghklbvetb/bljwt
hwbhkkbsywmtwjeqk.class
Could you please help me to get rid of the problem?
You can do it directly or give me the instructions by e-mail : [email protected]
Thank you in advance
Best regardsCheck for malware infection. The names of these files really indicate the system is infected.
Which version of Java client is installed? Especially older versions are very vulnerable against website or email based attacks.
Since malware infections are very different, detailed support can hardly be given via forums.
Best greetings from Germany
Olaf -
Computer very slow to do anything. Takes minutes to even move to trash.
How can I speed up computer? It takes a long time for anything to happen. It even takes minutes to move items to trash!
Hi Henry,
How old is it?
How much RAM is installed?
Exactly which model is it?
How much free space is available on the HD?
Have you tried anything, like repairing permission or verifying/repairing disk? -
Ordered 2 new iMacs, got 2 different DVD players, one is very slow
I just helped my sister and my girlfriend buy new iMacs, both 24" 2.4GHz. with 500 GB drives. Ordered a week apart. Interestingly they came with two different drives: A Pioneer for my sister and a Matshita for my wife. Both ordered online from Apple. Why the two different drives is my first question?
But I can tell you the Pioneer is slow as molasses. Its read speeds seem pathetic. As a test I tried copying a Stargate DVD on each iMac using Mac The Ripper 3.0. The Matshita copied it in just over 9 minutes. The Pioneer took 44 minutes! - what is up with that? Even our 2 year-old iMac copies faster!
Something seems very wrong ... and my sister is mad at me for convincing her to get a Mac.there might have been an update of drivers used in that week apart?
Very unlikely though :l
I would call AppleCare, since they are recently bought, there should be a warranty still valid.
-Connor -
I have had FIOS for at least 6 years, with the same router.
I did a speakeasy speed test and 5 mg's upload, 7 mgs download.
I have a icon on my laptop that shows internet speed and its never full bars (it is bars, no I'm not talking verizon wireless) is it possible I need a new router. I do use my laptop wirelessly. I'm thinking I might need a new router. Anybody agree?
Solved!
Go to Solution.Just for comparison try this speed test also http://my.verizon.com/services/speedtest/. The experts above have covered the issue well!
If a forum member gives an answer you like, please give them the Kudos they deserve. If a member gives you the answer to your question, mark the answer as Accepted Solution so others can see the solution to the problem. Thanks !!!
http://forums.verizon.com/t5/Verizon-net-Email/Fix-for-Missing-Inbox-sent-folders-etc-with-Internet-Explorer-11/m-p/647399
Maybe you are looking for
-
I can't remove an icon from dock
I installed some Canon software with a CD, then found that the software wouldn't work on the OS (10.9.1), but that iPhoto worked fine. So I dragged all the useless software in applications to trash and deleted trash. The icons for the various useless
-
Hi I have a question. If I open a connection and call an sql function n number of times in a loop and then commit and close the connection, does it involve n number of database hits? is it very expensive in terms of time taken?(But, functions are pre
-
Hi Friends, I have copied account statement F140_ACC_STAT_01(SAP Script) into Custom form and added a logo in it. And moved it to PRD system. In DEV system i'm getting everything perfect. But in PRD, i'm not getting the table heading in the table hea
-
ok so I can print out the date and time when i run the program. How would I write a method that updated the clock every second, kinda like a digital watch. would I just use a while loop? or does java have an actual running clock? Here is the code I h
-
Downloaded Nineteen Minutes by Jodi Picoult as the first book for my wife. It appears to be missing the last line, or several lines on the pages. I can use portrait or landscape mode but miss lines in either. Am I missing something?