Time and date stamp

Hello. I am trying to add a time/date stamp to my inputs to LV. There are some comments here that I went through but they didn't seem to fit my application. With each tick of the timer I am collecting 5 inputs. Whate I would like is for the final column to have a time/date stamp. I have tried using the Vi's which seem appropriate for this however, they dind't have the affect I had hoped. All I want is for each tick of the clock and a sample is collected, to have he time stamp corresponding to that data.
Thank you

Yes, I've understood what you mean for a bit now and I've been telling you what to use, even linking to VIs.
Here is a step-by-step list of what you need to do to get your data to be in the same format as your timestamp:
Open the Timing palette, click Get Date/Time in Seconds, place it inside your loop.
Open the Timing palette, click Get Date/Time String, place it inside your loop.
Wire the output of Get Date/Time in Seconds to Get Date/Time String.
Concatenate the outputs of Get Date/Time String
Place Number to Fractional String inside your loop.
Wire array of data (capacitance, dissipation factor, voltage) to the Number to Fractional String VI
You now have all of your data and timestamps in the form of strings. Build an array of all of these strings and write to spreadsheet. If you want the timestamp as the last column, then build the array with the timestamp after the data. Surely you can figure that part out now.

Similar Messages

How do I add a time and date stamp onto my pictures?

Can anyone tell me how to place a time and date stamp on all my pictures?

DTRAND wrote:
How do I go about creating a script, how do I run it, and where do I run it
(ie: exactly the steps)... sorry I am new to this.
You don't need to learn scripting. Just ask in the scripting forum if they can help you.
They will point you to an existing one or might even do one for you.
http://forums.adobe.com/community/photoshop/photoshop_scripting

How do I keep the time and date stamp of my photo when exporting from iphoto

Hi,
I notice the time and date stamp changed when I exported the photos from iPhoto 11 to a external HDD.
When I looked at the information about the exported photos on my external HDD the time and date changed to the time and date of when I exported the photos form iPhoto instead of keeping the time and date information of when the photo was taken as it appears in iPhoto.
I thought the time and date stamp is in the meta data of the photo file and can't be changed, am I correct?
Thanks,

Kyzelios,
How can view the meta data from "finder" or do I need a 3rd party app?
"Get info" function only gives me the creation date which is the export date and time.

How do I make the time and date stamp correct for my documents, songs in itunes, etc.

No matter when I add a song or save a document it says it was added/saved on 1/5/2011. It would be great if somehow I could get back the dates and times that things were added, but I know that may be impossible. I just want a way to have the correct time and date stamp from now on. Finally it wasn't always like this, when I first got the computer everything was correct, I just started noticing it. Additionally my clock is correct, so I don't understand why things aren't saved according to the clock. Thanks in advance

Resetting your Mac's PRAM and NVRAM

Time and Date Stamp Format and User name

Hi All,
I am very new to adobe acrobat so forgive my ignorance. I am trying to add a date and time stamp to pdf files using adobe acrobat so that when they are printed using adobe acrobat the print date will be automatically added. First I have found the below script on the forum which is entered as a field, will this work using acrobat version 5 or version 7? Also i believe that the date format is 10/01/2009. How can I change this so that it will be in the 01 October 2009 and 24 hour clock format? Finally how do I also add some descriptive text before the date and time i.e. 'print date' and 'not valid 24 hours after printing'?
var f = this.getField("today");
f.value = util.printd("mm/dd/yyyy
h:MM tt", new Date());
One last question is there a way to add a user stamp to a pdf so that when the document is printed out the user's name is printed i.e. 'printed by J Smyth'.
Many thanks,
John

As noted, you need to change the formatting string to generate the date appearance as you need. You can add additional text to this string using the concatenation string operator, '+'. So you can do:
var f = this.getField("today");
var sDate = util.printd('dd mmm yyyy HH:MM tt", new Date())
f.value = 'Print date: ' + sDate + ' not valid 24 hours after printing';
All of the above information is covered in Adobe's freely down loadable Acrobat JS API and there are additional resources for JavaScript programing at the Acrobat Users Community and Planet PDF.
Accessing the 'identity' object is more complex. First, all users will need to complete the 'Identity" information for the application's preferences, as only the login name is picked up from the OS. Then each user will need to have an application folder level JavaScirpt installed on their computer to capture this information during the application initialization of Acrobat/Reader
// Folder level script to create an application level variables for the "identity" objects properties
var Identity = new Array(); // array for the identity objects elements
Identity.Corporation = identity.corporation;
Identity.Email = identity.email;
Identity.LoginName = identity.loginName;
Identity.Name = identity.name;
// or
var Identity = new Array();
for (i in identity)
Identity.i = identity.i;
You can then access the items in a PDF by adding the array element name to the Identity array:
// set a fied's value to the value of:
this.getField("loginName").value = Identity.LoginName;
this.getField("name").value = Identity.Name;
this.getField("by").value = "By: ";
this.getField("by").value += Identity.Name;
You can find the necessary JavaScript folders for Acrobat using the following code in Acrobat's JavaScript debugging console:
app.getPath("app","javascript");
app.getPath("user","javascript");

Workflow Approval Time and Date Stamp SharePoint 2010

Hello guys,
I hope you can help me. I try to start a parallel workflow with at least two persons. They can approve independently, but I need the approval date and the time from these person, but I only get one approval date. When the workflow is finished. How can I
get the different approval dates from the persons within the workflow?
Best regards
Matthias

If you are using the "Sharepoint Approval process" you can do that.
This is an example but you can do that in a diferent way:
On SPDesigner workflow editor, you need to create one variable for each date you want to save. EX: Date1 and Date2
Then, open the approval process, and go to "Change the behavior of a single task"
Then, on "When a Task Completes" section, add the following:
if CurrentTask:Outcome equals Approved
if Date1 is Empty
Date1 = currentTask:Modified
else
Date2 = currentTask:Modified

Importing video help! Need Time and date to show up on screen...

SOMEBODY HAS TO HAVE AN ANSWER!
Okay, little background... I just got a new Mac book pro lab top. First time apple user. Difficult to learn, but learned fast. I am working with IMovie HD program, got the hang of it. I have a Cannon ZR50 camcorder, mini DVR tape. Camera has DV,S, USB, AV etc.. port outs. Hooked it up to lab top to import video to lab top to edit footage add sound etc... to later burn to DVD via IDVD program
BTW: I used a DV to Firewire cable to load up footage.
PROBLEM I AM HAVING. is when I'm importing my video to the computer, time and date stamp from my camcorder's screen does not show up on Mac screen. It gets lost when importing. How I view it on my camcorder (SHOWING TIME/DATE INFO ON FOOTAGE TAKEN) is how I would like to view it after importing it to lab top to later edit ad sound tracks etc... If I hook up my camcorder to a VHS or TV, to record on tape of footage taken, Time/Date stamp of footage shows up and records on tape with no problem.
I spoke with a lot of people on this issue. Everyone refers me to someone else. I can't get an answer for something in my eyes is so simple. They all said " Why would you want the time and date stamp to show up on your footage anyway" Well I would like it to be that way. Topic got down to three things that might solve problem. 1. Need better video/editing software. 2. Need Digital Analog capture device. 3. Need new camcorder. I've been working on this problem for a day or so. It's getting rough for help. Any information on this problem would be great. If you need any more info on my issue please do not hesitate to Pm me. Thanks

Hi SIZ4SK:
Welcome to discussions!
You can't do that with iMovie but you can with a bit of help from a third party...
What you really need is this free plugin from TriX Software:
DVFileDateCM
http://www.trixsoftware.com/DVFileDateCM.html
Let me know if this helps or not.
Sue

Exporting time and date metadata onscreen in FCP 7

Hi there
Does anyone happen to know if i can display the time and date stamp onscreen when exporting to DVD in Final Cut Pro 7? I know that you can now capture the time/date metadata through log and transfer; i need to be able to show that onscreen the same way that you might use timecode when exporting to DVD.
Additionally does anyone know of a plugin that might give me the same control over this as we already get over timecode?
And finally, is it possible to print out a log inc: clip name, time and date from FCP7?
Thanks
Chris

ProDateDV from Automatic Duck was a unfortunately mistimed one trick pony that did this ... but only for DV format footage unfortunately, and as such it totally missed the DV bus, as it was only released just about a year ago. It seems to have been pulled from their products page already. Shame. The problem is that every different acquisition format records and stores this data differently, and usually proprietarily, so the details of how and where to find it within the auxiliary data stream is not at all straightforward, nor the means to write a plugin that would work regardless of source media type.

DATE and TIME and PATH stamps

I'm a relative newbie still having issues with getting date and time stamps on my printed documents. I use Preview, Pages, Numbers and also tend to print to PDF a lot, which I am opening in Preview.
I have found an "Insert" ability in Pages but for some reason it appears to only give me the date that I inserted the Timestamp and despite thinking that I understood that this would update itself when I re-open the document it does not seem to be doing this.
Can anyone help me figure out what I am doing wrong and/or what my options in Mac for putting the following on a document:
A. DATE and TIME /printed/
B. NAME of document with LOCATION (I assume this is software specific?!)
Thanks for any (further) help with this.
- Jon

menu Insert > Date_time
then apply what was described by Jerrold in his message above
Helpful AnswerRe: DATE and TIME and PATH stamps
22 nov. 2011 18:05 (in response to hotwheels 22)
Or simply double-click the inserted date-time (CAUTION : I don't know if the double click apply with every system or if it's dedicated to Lion).
As far as I know, the inserted date behaves the same in header, footer, text box or main text layer.
Yvan KOENIG (VALLAURIS, France) mardi 22 janvier 2011 20:25:12
iMac 21”5, i7, 2.8 GHz, 4 Gbytes, 1 Tbytes, mac OS X 10.6.8 and 10.7.2
My iDisk is : <http://public.me.com/koenigyvan>
Please : Search for questions similar to your own before submitting them to the community

Seperating time and date from time stamp

Hai,
Can somebody tell me how time and date are seperated from a time stamp with format like 12/01/2006 1:21:36
I want 12/01/2006 in one object and 1:21:36 in another object.
Also as BW takes only format YYYYMMDD, does having 12/01/2006 make any difference? If yes then how can I convert this?
Thank you.

Hi Visu,
For converting date check these:
Re: Date Conversion in Flat File
Bye
Dinesh

Iphoto 08 7.1.1 VS IPHOTO 6 6.0.6 dialog and date stamping photos

Hello again,
I asked how to date stamp and describe each job photo I take on my 08 version of Iphoto since it doesn't have the "YEARBOOK" selection in the BOOK formats. well I just tried something for the he## of it and it worked real well. Don't use BOOKS at all. Put the photos in ALBLUMS, click "select all" in EDIT click "batch change" in PHOTOS, set Title to Date and TIME then when the time and date show under each picture type next to them what you want to describe. Cilck on PRINT and a drop down menue will appear, chose "Proof sheet" and hit print again and off you go. NOTE if the date and time do not appear when you choose "Date and Time go to VIEW and make sure "Titles" is checked. It works for me -Now back to all my other problems --How come MIGRATE ASSISTANT doesn't????

Sorry Larry,
It was late and I was blind so I threw out the question -----The problem is I used the Migration Assistant when I got a new HD installed in my G4 and nothing happened other than the Fire Wire logo just kept running on my screen. I tied my G4 to my Imac with a Fire Wire--followed screen prompt on my G4 to restart my Imac while holding down the "T" key (on the IMAC). I did that and the Fire Wire logo appeared and began running in the faded mode on my IMAC screen. (Normally it should be a bright gray and yellow) I let it run but nothing ever happened and no info showed up on my G4. I tried it several times until the definition of Insanity popped into my head. I have a Rocstor back up HD for storage, tried leaving connected and disconnecting it to no avail. I assume that the Fire Wire logo running in the "ghost" mode is telling me something unfortunately I am just to clueless to know what it is. I am sure that I changed cables (reasonably) as that would be a natural, but nothing changed. I have gone the other way, G4 to IMAC using the same procedures with no problem.
Thanks, Mel

Getting the time and date of when tracks are playing for an honours project

Hi people.
I am in 4th year at Glasgow Caledonian University studying Audio Technology. I am doing an honours project on the classification of contemporary music and what I am looking to do is retrieve information on exactly when tracks are played (time and date) on an iphone using itunes.
I know that last fm time stamps each time a track is played and running this through itunes is an option. Does anyone know of a way to get this information from itunes? I have even tried phoning apple but they say possibly only a third party app which I have had no luck finding.
Thanks for reading.
Gerry Gregory

If I understand you correctly and you want to get this information from tracks being played on an iPhone, one of these might work for you:
http://itunes.apple.com/app/iscrob/id381910892?mt=8
http://itunes.apple.com/us/app/iscrobble-premium/id328295497?mt=8#
Regards.

Can we display Cube update time and date

Hi All,
can we display Cube refresh time and date for user with out going into the Cube properties. Can we use any substitution variable for that?
Another doubt----
Will there be any systen defined default substitution variable in Essbase or anly user defined variables. IF there what are they and purpose of it?
Regards

After the successful cube building, you can capture the time stamp from the system into a variable and you can set the note on database.
suppose below is the maxl script updatetime.mxl
login $1 identified by $2 on $3 ;
spool on to $4 ;
alter database $5.$6 set note $7 ;
logout ;
spool off ;
exit ;
you can call the script like
essmsh updatetime.mxl <<userid>> <<pwd>> <<server>> <<spoolfile>> <<appname>> <<dbname>> <<updatetime>>

How do i reset time and date on my itouch

how do I reset time and date on my itouch?

Go to Settings>General>International and make sure that Calendar is set to Gregorian.
Bext
Try:
- Reset the iOS device. Nothing will be lost
Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Reset all settings
Go to Settings > General > Reset and tap Reset All Settings.
All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
- Restore from backup. See:
iOS: How to back up
- Restore to factory settings/new iOS device.
If still problem, make an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem.
Apple Retail Store - Genius Bar

RE: Time and Date Changed by itself

The date and time will change to the wrong one automatically especially after the batt died. This repeated itself regardless on how many times i readjust the time and date to the right one. Someone please help me.

I had the same problem today. I also have the iPod 4g, no problems up until today. First make sure you calender is set to "Gregorian, you can do this by going to Settings --> General --> International, and you will see the calender options, mark Gregorian. Still didn't work? Try this: I experimented a little, and what i did was: First, I went to Settings --> General --> Date and Time --> Set Date & Time (before doing this make sure you're in the correct time zone) and here you can change the time and date. But, if it changes automatically, go to the date, and you may have the same problem here, but here's what i did. I couldn't change the month, or day, but i could change the year. Change the year to 2011, and then all the other options should come up. Hope this helped!

Time and date stamp

Similar Messages

Maybe you are looking for