Time Capsule drops connection with Windows 7 - KNOWN ISSUE

There are several sites posting solutions to this problem (example below).
Solution 1. - revert to older firmware of TC
Solution 2. - change local security policies
ONE PROBLEM THOUGH. I believe ONLY PROFESSIONAL versions of windows have the local policies acceptable. This means all of us using HOME editions are screwed.
*Thread from:*
*http://techsupport.foreverwarm.com/time-capsule-windows*
Windows Vista and Windows 7 cannot see Time Capsule drive
This might be your security settings. Open the Local Security Policy utility:
%windir%\system32\secpol.msc /s
Navigate to Local Policies folder, Security Options view. Find “Network security: LAN Manager authentication level”. If it is set to “Send NTLMv2 response only” change it to “Send LM & NTLM – use NTLMv2 session security if negotiated”.

ONE PROBLEM THOUGH. I believe ONLY PROFESSIONAL versions of windows have the local policies acceptable. This means all of us using HOME editions are screwed.
Home Edition users would have to perform a Registry edit as follows:
1. Open registry editor (ref: Start > Search > Enter: regedit)
2. Browse to HKEYLOCALMACHINE\SYSTEM\CurrentControlSet\Control\Lsa
3. Create a new DWORD value with the following properties: NAME = LmCompatibilityLevel & VALUE = 1
4. Restart your PC and try the connection again...

Similar Messages

  • Can time capsule be used with windows programs

    can time capsule be used with windows as a wi fi router? or dose the disk that came with the time capsule work with windows program?

    The wifi router side will work fine.
    The disk that came with the TC should have windows version of airport utility but you can download it.. that is important if you want to setup the TC or use the shared disk.

  • How to use Time Capsule via INTERNET WITH WINDOWS 7 SMB Cloud

    how to use Time Capsule via INTERNET WITH WINDOWS 7 SMB Cloud

    Get a vpn router.. I have no idea where you are in the world but you can find reasonable stuff for not too much money or even a general router that takes third party firmware like dd-wrt can run openvpn. 
    Set up the vpn router in place of the TC, as the main router in the network. Simply bridge the TC and place it behind the router. It will be accessible as part of the network via the vpn.
    This is the only safe way to do it via windows.
    http://www.dyncommunity.com/questions/18132/accessing-time-capsule-from-windows- 7-over-the-int.html
    If you google around I have seen posts about how to access TC by port forwarding SMB on the TC.. using a different port.. To me this is going to slow down the hackers by a day or two.. then they will discover the open port and access your network.. not just the TC.. they now have SMB access to everything. Don't do it. There is very little security on SMB.

  • Airport Express w/Time Capsule drops connection

    I just integrated my new Time Capsule into our all-Mac network here a couple of days ago and its been fine for the most part but I've noticed that the existing airport express flashes amber for a few seconds every so often (usually once per hour or so) and disconnects everyone sharing files and connections. I have Leopard Server 10.5.2 running as well and this didn't seem to be happening before introducing Server to the mix (it was connected about 48 hours AFTER the time capsule) but the problem seems to lie with the Airport Express. Things are connected as follows:
    Cable modem --> Airport Extreme
    Airport Extreme --> 2 ethernet connections to Macs, 1 ethernet connection to Time Capsule
    Time Capsule --> 1 ethernet connection to Mac Mini running Leopard Server
    I have bridge mode set up and a couple of portables connected to it as well as an Apple TV, all of these seem to be connecting and staying connected just fine - it's the two Mac's connected directly to the Airport Extreme that get hit - the light on the unit (AE) flashes amber for maybe 2-3 seconds and I lose connection to any other macs I was connected to - I can easily re-connect with no problems at all but its obviously kind of a pain when you're working on files from the server, etc. and everything more or less locks up while OS X loses these connections.
    Does anyone have any insight into why this might be happening? I've never had any trouble with this prior to Time Capsule/Leopard Server, both of which I allowed to more or less set their own settings on the Airport Extreme figuring that it isn't too complex a set up or anything, it's not like we're a full on 20 client office here or something, just 5 total macs, no pc's, etc.
    any guidance would be greatly appreciated.

    I'm running into exactly the same problem. Configuration is the same as Jackoschild's. I get about an hour of good connection, then signal drops off and I get a rapid set of connects then disconnects. Very frustrating. I'm considering turning off the Airport on the Time Capsule and going with my 54g wireless built-in to the FIOS router it is attached to. Total of two iMacs running 10.5.2 (one 20" G5, one 24" iMac) and four PCs (Windows XP SP2) demonstrating the problem. I NEVER had a drop issue with the FIOS ActionTek wireless.
    Any solutions?

  • Issues with Time Capsule- Dropping connection daily

    I own a 1TB Time Capsule and use it to store backups and my iTunes library. I have a large library, and I wanted to have a dedicated drive to store all of my songs so they could be accessed by both my PC and MacBook, so I was pointing in this direction at the Apple Store.
    When trying to move files over to the TC from my Macbook, my Macbook will often freeze, and the TC can no longer be found, along with my wireless network. The light remains green, but it is unusable unless it is unplugged from the wall and plugged back in. This has happened daily for the past few weeks, but today has happened 5 times in the past hour.
    It most commonly happens when I am adding songs to my iTunes Library, both from CDs and from files. It should be noted that, when the TC goes down, I also can't access the internet on my PC, which has an ethernet cord from my TC plugged in.
    I'd appreciate any help whatsoever - this is starting to get very irritating.
    Thanks!

    Hi I had similar problems. I moved houses got my own cable modem and tried to use the TC as my wireless, as i had it in my other home. The connection would drop constantly and i was unable to use the TC as a wireless device, it would also freeze my computer (mac book Pro). After asking everyone for help i found that when i moved the TC next to the cable modem in the garage it all worked. Apparently the ethernet cable that ran from the garage to the living room was only using 4 of the 8 pins and thus was dropping the connection. i am now connected directly from the modem to the tc and it has not failed yet (cross my fingers). After all this was suppose to be wireless and thus i don't need to have it right next to my computer. The signal is strong and it has not caused any problems. I didn't mess with the settings after i did a hard reset on the TC. So far so good. hopes this helps.

  • Time Capsule drops connection to iMac

    I've recently got a late 2009 iMac 21.5" and am having issues using it with my Time Capsule. Intermittently the iMac loses connection, it appears to still be connected the the TC but it can't communicate. I've set a ping going to 10.0.1.1 in the Terminal app with no reply and then turn airport off and back on again and hey presto it starts receiving a reply. I've looked at interference, change channel on my TC, no difference. So I ran an ethernet cable into a LAN port on the TC and no it works fine, two days with no drop outs. I don't know what to try next any ideas?

    I think I have the same issue.
    My iMac is connected to the TimeCapsule via ethernet (though I do have wifi running to synch a few apps with iphone).
    My problem is that I have my iPhoto library file on the TimeCapsule so that it can be accessed by other family members.  Almost invariably, when I plug in my iPhone, iPhoto pops up and asks which library to use even though I have indicated that the iphoto library on the TimeCapsule is to be the default. 
    So, in essence, I don't have to log back in, only re-connect almost always which is a pain.
    Any ideas appreciated!

  • Time capsule drops connection

    Mac book has problem with dropping connection to newest Time Calsule.

    NHawk wrote:
    The first problem is that the time capsule quit performing backups for my laptop.
    Welcome to Apple's discussion groups.
    For help with your Time Machine problem, check the FAQ and Troubleshooting items at the top of the Time Machine section for OS X 10.6:
    http://discussions.apple.com/forum.jspa?forumID=1342
    the Time Capsule started blinking yellow and airport utility came up saying there was a problem finding a wireless signal (i think).
    Please describe your local network configuration, including brand(s) and model number(s) of all equipment, as well as how everything is connected. It sounds like your Time Capsule is configured to connect wirelessly to a network created by your cable company's router.

  • Time Capsule not Compatible with Windows 7

    As everyone is aware by now I'm sure, the Time Capsule with firmware 7.4 and up is not compatible with WIndows 7 when trying to access the TC disk through Windows 7. My question is when or is Apple going to update the firmware with a Windows 7 compatible version? I am sure that I am not the only one ready to return my TC.

    Welcome to the discussions!
    +My question is when or is Apple going to update the firmware with a Windows 7 compatible version?+
    We're all end users just like you and have no way of knowing in advance what Apple will do. Even if someone has "heard something", the terms and use agreement for the forum does not allow us to discuss future products or developments.
    Have you contacted Apple directly regarding your concerns? There's no assurance that they even read these boards.
    http://www.apple.com/feedback/timecapsule.html

  • Time capsule wifi connectivity with iPad, iPhone, and other?

    I just purshaced a Time Capsule, and it is up and running. I can connect my Macbook Air wirelessly, but I am not able to connect with my Iphone neither Ipad. What would the problem be?

    Same as what i just posted here. https://discussions.apple.com/thread/4843683?tstart=0
    I would suggest factory reset the TC if the above doesn't work and just try again.. the idevices can be more difficult to get running.

  • Time Capsule Airport Connection with Deutsche Telekom 300HS VDSL Modem

    I just swithched my Deutsche Telekom connection to VDSL 50 but can no longer connect to the internet.  There are a couple of configurations I have tried:
    a.    The Speedport 300 HS modem connected directly to the Time Capsule.
    b.    As above, but with the Speedport W700V router in between the modem and Time Capsule.
    The green light on the modem is illuminated to confirm the VDSL is available.
    Could somebody please advise the correct settings in the Airport Utility to make either configuration above work?
    Thanks,
    Paul

    b.    As above, but with the Speedport W700V router in between the modem and Time Capsule.
    The green light on the modem is illuminated to confirm the VDSL is available.
    Could somebody please advise the correct settings in the Airport Utility to make either configuration above work?
    Thanks,
    Paul
    This is the easiest one.. just use TC in bridge. You go to the airport utility, manual setup, select internet tab and under connection sharing.. off bridge mode.
    a.    The Speedport 300 HS modem connected directly to the Time Capsule.
    This is harder as it depends on the authentication system used by your VDSL..
    The TC has limited options.. either DHCP.. so the vdsl has to pass the public IP as in half bridge type system.. or it has to be PPPoE authentication.. as that is the only other alternative offered.

  • Can I use Time Capsule shared drive with Windows 7?

    I have a MacBook Pro and want to buy/set up Time Capsule and use it as a shared hard drive in my small home office. We have PC's as well with Win7.  WIll this work?

    First find the spec for your AEBS. TC is Gigabit ethernet ie 10/100/1000. The older AEBS were Fast ethernet ie 10/100.
    What would I do? TC set as base and create its own wireless network.. Main computer and cable modem attach to it. AEBS set up as bridge and create its own wireless network.
    With this set up you can configure TC as N only at 5 GHZ if you have Extreme capable wireless Macs. The AEBS set N+(B/G) 2.4 GHZ for older G capable Macs. If you ever purchase Apple TV it can connect to the TC for speed of upload files to itself. The older Macs can still connect to AEBS and be used a Apple TV to stream.

  • Access Time Capsule over internet with Windows??

    Is this possible? I have a MobileMe account, and if required a dynamic dns hostname.
    My Time Capsule is behind a router. What firewall settings do I need to allow?
    Thanks

    I'd suggest going over to http://www.dyndns.org and pick up a dynamic DNS. that will allow you to access your Timecapsule even if your ip address changes.
    typically Windows wont work with afp:// addresses (which is appleshare) Windows natively uses SMB:// (samba/windows filesharing) you should be able to set up the smb sharing using timecapsule.
    Looking at the time capsule setup, it looks like smb:// is automatically supported so you should type
    smb://TCexternal_IPaddress
    instead of afp://

  • WRT54GS drops connection with Windows Vista

    Hello,
    Wireless connection drops constantly between Linksys WRT54GS and Windows Vista laptop. It actually connects, but then drops within a minute. Laptop with Windows XP works fine with the same router.
    I've changed the channels, advanced settings, updated firmware, changed the router itself. Nothing helped.
    Can you advise anything?
    Thank you.

    I already checked everything in Vista, addition to that i took laptop to a different linksys network and connection is stable.  I have a lot of reports from another people i fix computers for and they have same problem with  54GS router. After i replaced linlsys with netgear, problem was resolved. It has to be something with the router.

  • Can I access time capsule files hd with Windows XP or 7?

    I bought the Time Capsue 3TB to make back up for  assist to videos in another  computers with operational system Windows, but with you not to have access the archives of the HD of the Capsule Team, what I can make to be able to assist the videos??
    Thanks.

    Ok, you need to ensure the TC is using SMB (windows share) names..
    All names in the TC are short, no spaces pure alphanumeric.
    Set the windows workgroup in file sharing page.
    Set the guest account to on, read and write.
    On the computer, load bonjour for windows.
    The full airport utility is useful.
    Open the TC in windows explorer..
    \\TCname or \\TCIPaddress
    If this fails.. ping the TC by name and IP address. If this fails change the windows security level and firewall to off.. make sure win7 or vista is set to home, not work or public.
    If the TC does not respond to pings it will not be able to accessed.

  • Time Capsule Lost Connections in Windows Vista

    I recent bought a tm, but i cant maintain my wireless connections when i access the hard drive, please help me.

    What is the format on the external USB drive?
    Have you setup the disk in workgroup correctly to the network workgroup name?
    Turn on guest read and write at least to get things started. If you turn on password or changed the default password you will need to remember that.
    How are you trying to access the disk? It will more than likely not show up in network shares, without deliberately using the tc ip.. so open explorer and type in \\YOUR_TC_IP_ADDRESS\Share_name
    If you have installed the airport utility for windows it should also install the required files to find the disk.

Maybe you are looking for

  • Peoplesoft installation on windows 7 (64bit)

    Hi Gurus, I want to do peoplsoft server installation on windows 7 (64 bit).. First i need to FSCM (financials and supply chain management) , please provide me the part numbers for the same so that i can download from edelivery or raise a SR ... My id

  • Problem in Weblogic 5.1

    When i started my weblogic i got the following error can any one help to resolve this.. C:\weblogic>set PATH=.\bin;C:\PROGRA~1\RATIONAL\RATION~1\NUTCROOT\bin;C:\PROGRA~1\RATIONAL\RATION~1\NUTCROOT\bin\x11;C:\PROGRA~1\RATIONAL\RATION~1\NUTCROOT\mksnt;

  • FLEX 2...  Or Flash Remoting

    Hi, could someone please help me make a decision with which architecture to use to build a flash application? I want a flash front end, i dont care about users who dont have a flash player; this is for a commercial enterprise for a specific user base

  • A Very Big Challenge !!!!!!!!

    hi,all Assume that i have a few tables like: USER : user_id ,user_name, ac_id PROVINCE: pro_id,pro_name CITY : cit_id,cit_name,pro_id BANK :bk_id ,bk_name,cit_id ACCOUNT:ac_id,ac_number,bk_id I want to create a page which is used for users to recharg

  • Cannot start j2ee

    i use win xp pro, j2sdk 1.4.0, beta 2, now installed j2sdkee 1.3.1 under C:\Program Files\, but cannot start all commands like j2ee, i got such error message: "'C:\Program' is not recognized as an internal or external command, operable program or bat