Time constraint 1 to be deleted ?

How can a record be deleted from IT0006 which is Time constraint 1. I have to delete it somehow.

Hi All,
I think I have got a better solution.
PA30 --> Utilities --> Delete Pernr --> Delete only that Infotype
Cheers
Vijay

Similar Messages

Time Constraints - Hr ABAP

Hi Everyone
Can anybody throw some light on the various time constraints used in the HR-ABAP and their relation to the infotypes.
Also specify if their some Transaction code from where we can get to know about the value's of the time constraints.
And also if their's any Table associated with them.
<REMOVED BY MODERATOR>
Thanks & Regards
Gaurav
Edited by: Alvaro Tejada Galindo on Feb 22, 2008 10:24 AM

Hi,
Please refer to the document below:
When you update an infotype, old data is not lost but archived for historical evaluation. The system records a specific period of validity for each infotype, This enables the system to store more than one infotype record at the same time, even if their validity periods overlap. This means that the time relationships between infotype records must be defined. The concept of time constraints enables you to do this.
HR master data uses the following three time constraints:
Time Constraint 1
For the entire time that the employee works at the enterprise, exactly one valid infotype record must exist. The validity periods of the individual records must not overlap. If a new record is created, the system automatically uses the start date of the new record as the delimitation date of the old record. Gaps are only allowed between the employees entry date and the start date of the first record.
Time constraint 1 must be used for all of the infotypes containing information that must be available at all times. This is particularly true of personal and organizational assignment data.
If a record is delimited because of time constraint 1, the system displays an appropriate message.
Time Constraint 2
No more than one valid record can exist at any one time. Records with constraint 2 must not overlap. Their existence is not obligatory. If a new record is created, the system automatically delimits the previous record, if one exists.
If a record is delimited because of time constraint 2, the system displays an appropriate message.
Time Constraint 3
Any number of valid records can exist at any one time. The individual records do not conflict with each other.
The system also contains the following time constraint indicators:
Time Constraint A
Infotypes with time constraint A must have no more than one record. The system automatically assigns the record a validity period from January 01, 1800 through December 31, 9999. This validity period cannot be subdivided.
Infotype records with time constraint A cannot be deleted.
Time Constraint B
Infotypes with time constraint B must have no more than one record. The system automatically assigns the record a validity period from January 01, 1800 through December 31, 9999. This validity period cannot be subdivided.
Infotype records with time constraint B can be deleted.
Time Constraint T
Infotype records with time constraint T depend on the subtype.
The principles of data entry and time constraints that apply to infotypes ensure that data is consistent and accurate. They also constitute the basis of time recording, payroll accounting, and reporting.
Thanks,
Sriram Ponna.

Time Constraint Classes.

Hi All,
Pls let me know the concepts for Time Constraints classes.
Regards
Rajesh

A time constraint indicates whether more than one infotype record may be
available at one time. The following time constraint indicators are
permissible:
     -   1: An infotype record must be available at all times. This
         record may have no time gaps. You may not delete the record last
         stored on the database because all records of this infotype
         would otherwise be deleted.
     -   2: Only one record may be available at one time, but time gaps
         are permitted.
     -   3: Any number of records may be valid at one time, and time gaps
         are permitted.
Other possible time constraint indicators are as follows:
     -   A: Only one record may ever exist for this infotype. It is valid
         from 01/01/1800 to 12/31/9999. Splitting is not permissible.
         View V_T582B Infotypes Which are Created Automically controls
         whether the system automatically creates the infotype record for
         an employee hiring or an applicant data entry action.
         Infotypes with time constraint A may not be deleted.
     -   B: Only one record may ever exist for this infotype. It is valid
         from 01/01/1800 to 12/31/9999. Splitting is not permissible.
         Infotypes with time constraint B may be deleted.
     -   T: The time constraint varies depending on the subtype.
     -   Z: Refers to time management infotypes. The time constraint for
         these infotypes depends on the time constraint class defined in
         view V_T554S_I Absence: General Control. Collision checks are
         defined in view V_T554Y Time Constraint Reaction.
Regards
...Sadhu

Time Constraint Class

What is the number (0 to 7) stands for time constraint class in absence for the screen number 2001. I have a leave type CL (causual leave). What time constraint class shall i assign to it.
Regards,
Chinmay

for ur info alreadt raghu has given the answer any way check this tooo
A: Only one record may ever exist for the infotype (from 01/01/1800 - to 31/12/9999). Infotypes with time constraint A may not be deleted.
B: Only one record may ever exist for the infotype (from 01/01/1800 - to 31/12/9999). Infotypes with time constraint B may be deleted.
T: Time constraint varies depending on subtype.
Z : Refers to time management infotypes.Time constraint for these ITs depend on time constraint class in table V_T554S_I. Collision checks : V_T554Y
Apart from 1, 2, 3 there are some other types of Time Constraints: A, B, T, Z.
The Infotypes with TC type A must exist, must have only one record in its lifetime, and these ITs cannot be deleted.
Example: IT0003 (Payroll Status)
The Infotypes with TC type B must have only one record in its lifetime.
Example: IT0031 (Reference Personnel numbers)
The Infotypes with TC type T will have subtypes, and the TC is based on the subtype.
Example: IT0009 (Bank Details)
The Time Mnagegement Infotypes will have TC type Z .
Example: IT2001 (Absences)
rule that determines whether collisions in time data are allowed, and if so, specifies how the system reacts to such collisions.
Time contraints comprise the following:
Time constraint classes that determine which collisions in time data records are allowed
Time constraint table that contains the time-based collisions allowed in the time data records
Time constraint indicator that displays whether a new data record that collides with an existing time data record can be transferred to the system or whether the transfer is prohibited
When you update an infotype, old data is not lost but archived for historical evaluation. The system records a specific period of validity for each infotype, This enables the system to store more than one infotype record at the same time, even if their validity periods overlap. This means that the time relationships between infotype records must be defined. The concept of time constraints enables you to do this.
HR master data uses the following three time constraints:
Time Constraint 1
For the entire time that the employee works at the enterprise, exactly one valid infotype record must exist. The validity periods of the individual records must not overlap. If a new record is created, the system automatically uses the start date of the new record as the delimitation date of the old record. Gaps are only allowed between the employeeu2019s entry date and the start date of the first record.
Time constraint 1 must be used for all of the infotypes containing information that must be available at all times. This is particularly true of personal and organizational assignment data.
If a record is delimited because of time constraint 1, the system displays an appropriate message.
Time Constraint 2
No more than one valid record can exist at any one time. Records with constraint 2 must not overlap. Their existence is not obligatory. If a new record is created, the system automatically delimits the previous record, if one exists.
If a record is delimited because of time constraint 2, the system displays an appropriate message.
Time Constraint 3
Any number of valid records can exist at any one time. The individual records do not conflict with each other.
Time Constraints:
When an info type is updated, the old data is not lost. Instead, it remains in the system so that you can perform historical evaluations. Each info type is stored with a specific validity period. This means that the system can contain more than one record of the same info type at the sometime, even if their validity periods coincide.
If you enter and save new information in an info type, the system checks whether the record already exists for this info type. If this is the case, the system reacts based on rules or TIME CONSTRAINTS set up for that particular info type or subtype.
Time Constraint 1: This is mandatory information that must be uniquely available, gaps are not allowed
Time Constraint 2: This is optional information that, if available, must be unique, gaps allowed.
Time Constraint 3: This is optional information that, if available, can exist more than once.

Time constraints and Dialog module

1.What is the difference between the time constraints A(IT exists just once from 01 Jan 1800 to 12 Dec 9999) and B(IT exists for maximum of once from 01 Jan 1800 to 12 Dec 9999)?
2.What is the necessity of dialog module for a Infotype?

Time Constraint A and B
Infotypes with time constraint A & B must have no more than one record. The system automatically assigns the record a validity period from January 01, 1800 through December 31, 9999. This validity period cannot be subdivided.
Infotype records with time constraint A CANNOT be deleted.
Infotype records with time constraint B CAN be deleted.
The difference is check the BOLD TEXT.
As for ur second question, Function modules/dialog modules helps calling infotypes when called from any custom program ,and allows you to perform similar actions/tasks that you would perform on them from direct maintainance. ex: create,change, delete etc. also performing the same on multiple infotypes in a single go using a them is easier than writing a code to manipulate each single infotype.
SAP exposed these functions to be exploited as there will come many situations in business scenarios where you require to work with them by writing custom code.
hope its helpful

Calendar time constraints

I started another thread about this but have had no replies. I know this means no one has a fix, but it would help a lot to know the answer to this question:
Is anyone currently syncing calendars - iCal or Entourage - to an external device, particularly a Nokia phone, where the iSync time constraints - "Don't sync events older than:..." and "Don't sync events after:... - are actually working?
I've established that I'm not the only person for whom they no longer work, but if I can find someone for whom they do actually work, then I'll keep debugging my system, instead of looking for a workaround and hoping it's fixed in the next update.
Thanks in advance,
Steve = : ^ )

A time constraint indicates whether more than one infotype record may be available at one time. The following time constraint indicators are permissible:
1 = An infotype record must be available at all times. This record may have notime gaps. You may not delete the record last stored on the database because all records of this infotype would otherwise be deleted.
2 = Only one record may be available at one time, but time gaps are permitted.
3 = Any number of records may be valid at one time, and time gaps are permitted.
Other possible time constraint indicators are as follows:
A = Only one record may ever exist for this infotype. It is valid from 01/01/1800 to 12/31/9999. Splitting is not permissible.
View V_T582B Infotypes Which are Created Automically controls whether the system automatically creates the infotype record for an employee hiring or an applicant data entry action.
Infotypes with time constraintA may not be deleted.
B = Only one record may ever exist for this infotype. It is valid from 01/01/1800 to 12/31/9999. Splitting is not permissible.
Infotypes with time constraint B may be deleted.
T = The time constraint varies depending on the subtype.
Z: Refers to time management infotypes. The time constraint for these infotypes depends on the time constraint class defined in view V_T554S_I Absence: General Control. Collision checks are defined in view V_T554Y TimeConstraint Reaction.

What is Time constraint

Hi gurus,
I wanted to know what is Time constraint

A time constraint indicates whether more than one infotype record may be available at one time. The following time constraint indicators are permissible:
1: An infotype record must be available at all times. This record may have no time gaps. You may not delete the record last stored on the database because all records of this infotype would otherwise be deleted.
2: Only one record may be available at one time, but time gaps are permitted.
3: Any number of records may be valid at one time, and time gaps are permitted.
Other possible time constraint indicators are as follows:
A: Only one record may ever exist for this infotype. It is valid from 01/01/1800 to 12/31/9999. Splitting is not permissible.
View V_T582B Infotypes Which are Created Automically controls whether the system automatically creates the infotype record for an employee hiring or an applicant data entry action.
Infotypes with time constraint A may not be deleted.
B: Only one record may ever exist for this infotype. It is valid from 01/01/1800 to 12/31/9999. Splitting is not permissible.
Infotypes with time constraint B may be deleted.
T: The time constraint varies depending on the subtype.
Z: Refers to time management infotypes. The time constraint for these infotypes depends on the time constraint class defined in view V_T554S_I Absence: General Control. Collision checks are defined in view V_T554Y Time Constraint Reaction.

Deleting an Infotype with Time Constraint 1 - programatically

Hi there,
We have a few records (IT0008), that need to be deleted. Unfortunately, when we use PA30 to delete, it won't delete the record(s). (Displays the error msg. "Record has time constraint 1" ) But, when we use the Utilities option in PA30 and go thru', it appears to successfully delete the same.
Now, could somebody pl. let us know how to go abt. doing the same programatically in ABAP ? I've tried looking at the FM's HR_MAINTAIN_MASTERDATA and HR_INFOTYPE_OPERATION (without much luck though....Although, SAP claims to have a documentation of these FM's, there is actually no proper docmn. at the Field level of these FMs)
Moreover, the FM HR_MAINTAIN_MASTERDATA returns exactly the same error "Record has time constraint 1".
Am a bit baffled as it is...
Any help would be gratefully acknowledged and appreciated.
Many thanks in anticipation,
Kind Regards,
RVS

there is no function module to do forbidden actions.
you only can do it with DELETE statement.
select single dbtab from t777d into gv_dbtab where infty = p_infty.
delete from (gv_dbtab) where pernr in p_pernr.
But you will have to be very carefully. There are "blind" infotypes behind some "normal" infotypes you will have to care about (i.e. 0000 -> 0302).

Time constraints for IT0377

Hello All,
For the Benefits IT, 0377, we are using a benefit area 08 and subtype 0001.
For this Benefit Area and Subtype, we have configured several Benefit Plans such as BUPA, CYCL, TRVL etc.
We want to set the time constraint such that for an employee, multiple benefit plans for the same period can exist (Time Constraint 3), but at the same time, there should be no overlapping record for the same benefit plan.
for Ex, a BUPA can exist from 01.01.2007 - 01.01.2008 and
a CYCL could exist from 01.01.2007 - 01.01.2008 <i><b>but</b></i>
another BUPA with 15.01.2007 - 15.09.2007 should not be allowed. In this case the earlier BUPA should be delimited.
If I use time constraint 1 or 2 I cannot create multiple benefit plans, as all previous records with the same time range are deleted.
How can I configure the Infotype such that the above requirement can be fulfilled?
Thank You,
Vaishali

Hi..
I don't think it can be done, as this as time constraint depends on the startdate and enddate, and it has no connection with the Benifit Plan .

Time Constraints

Guys,
Need help.
I want the standard SAP time constraints (or a copy ) of the TCs from t554y.
i have been experimenting in it and now i dont have the original.....
problem is am not able to overwrite my absence with an attendance...
have used 1 as the Tc for both the Attd and Abs.
though am using "A", am not able to over write.system says "check collisions, not able to insert your attendance"
wht to do..

Hi,
This occurs because the absence record is present for that period. Please delete that record and then enter your attendance for that day.
You can change the TC in table T554Y.
Hope this helps,
Reward points if helpful,
Thank You,

Time constraints for infotype 0185

Hi experts,
Need your suggestions,
Is it possible to change the Time constraints for infotype 0185. What will be the impact if i change from 2 to 3 time constraints. Please explain...
Shiv.

hi,
what i meant was standard time constraints should not be changed unless there is no other option.
changing the time constraint is a quick fix solution.
these standard time constraints are set after a lot of thought.
like he referred 185 which is personnel ids.
here you can see that it has sub types each sub type can have one record.
you cannt have two passports .
you cannot have two pan numbers etc.
lets us sasy the end user enters some data wrongly and then he realises and creates another record for the same with out deleting the old one.
the system will take it.
but as you can see the data is already duplicated and it gives errors if some work flow or some other functionality is written basing on that input.
regards
nalla

IT0009 with Time Constraint 1

Hi Experts,
We have defined IT0009 with a subtype whcih has Time Constraint value as 1. Ideally we shouldn't be able to delete the IT0009 with Time Constraint 1. But still we are able to delete all records for It0009. Could anybody tell why this is happening?
Regards
Niharika

Hi,
Time constraint Class for infotype 0009 is T that means it will depend upon the subtype
If you change this time constraint class to one in table V_512W_D you will not be able to delete the recods for 0009.
Warm Regards,
Kapil Kaushal

Change Time Constraint

Hi All,
What will be the effect on data if we change the time constraint from 3 to 2.

Infotypes or subtypes with time constraint 2 can only have at most one record for a given time period there can be gaps between periods if record over lap the system adapts the previous record accordingly by deleting ,dividing,or delimiting
Example of an infotype with tome constratint 2 is the subtype spouse (1) in infotype family\related person
this is regarding infotype 2
And time constraint 3 will have gaps between records or over lapping records
Edited by: Sikindar on Mar 18, 2008 12:18 PM

Time Constraint Error when calling a Function module from Webdynpro ABAP

Any help will be greatly appreciated - Thanks RM
Time Constraint Error
Information on where terminated
    Termination occurred in the ABAP program "SAPUP50R" - in
     "CHECK_TIME_CONSTRAINT_S1".
    The main program was "MP000000 ".
    In the source code you have the termination point in line 1069
    of the (Include) program "UP50RU01".
Error occurred during batch input processing
Source Code Extract
      l_is_inconsistent = 'X'.
    ENDIF.
Check if there are inverted time periods.
    IF l_prelp_line-begda > l_prelp_line-endda.
      l_is_inconsistent = 'X'.
    ENDIF.
Check if there are overlaps or gaps.
    IF NOT l_prelp_before IS INITIAL.
      l_date_difference = l_prelp_line-begda - l_prelp_before-endda.
      IF l_date_difference <> 1.
        l_is_inconsistent = 'X'.
      ENDIF.
    ENDIF.
    l_prelp_before = l_prelp_line.
ENDLOOP.
IF l_prelp_before-endda <> '99991231'.
    l_is_inconsistent = 'X'.
ENDIF.
IF l_is_inconsistent = 'X'.
    IF p_access_type = 'R'.
490 Datenbankschiefstand Personalnummer & Infotyp &
      MESSAGE x490 WITH l_prelp_before-pernr l_prelp_before-infty.
    ELSE.
491 Unzulässige Daten Personalnummer & Infotyp &
Line 1069 Error occcurs >>>> MESSAGE x491 WITH l_prelp_before-pernr l_prelp_before-infty.
    ENDIF.
ENDIF.
ENDFORM.                    " CHECK_TIME_CONSTRAINT_S1     "XYVN0352581
*&      Form clear_no_adapter_needed              new     "XREN844998
      text
FORM clear_no_adapter_needed .
CLEAR no_adapter_needed.
ENDFORM.                    " clear_no_adapter_needed
*&      Form set_no_adapter_needed              new     "XREN844998
      text
FORM set_no_adapter_needed .
no_adapter_needed = 'X'.
ENDFORM.                    " clear_no_adapter_needed

Hi,
Well, are you trying to do a batch input on infotype 0000? If yes you need to check that the proposed values respects the time constraint, meaning no gap, no overlaps and no inversions. Also fields SUBTY, OBJPS, SPRPS and SEQNR must remain initial when processing IT0000...
Kr,
Manu.

I got the new iPhone5 back in Dec, I hooked it up to my computer for the 1st time this wk. It deleted all new data added since Dec (notes,contacts,texts,pics, info in apps) and reverted back to all my old data. How can I retrieve all the lost data??

I got the new iPhone5 back in Dec, I hooked it up to my computer for the 1st time this wk. It deleted all new data added since Dec (notes,contacts,texts,pics, info added to apps) and reverted back to all my old data (literally uploaded all of my old texts and 1400 old pics and deleted anything new). How can I retrieve all the lost data?? Please help!!

SkyDaughter29 wrote:
My current situation: I have soooo many texts on my iphone and I haven't deleted many because I need the information contained in them for future reference and for legal purposes. I would really like to find a means and way to save them other than on the phone itself. I've done searches for various apps yet I'm not finding what I think I would need. It appears Apple does not sync the texts between the iphone and my MacBook Pro.
Try the computer apps PhoneView (Mac) or TouchCopy (Mac & PC):
http://www.ecamm.com/mac/phoneview/
http://www.wideanglesoftware.com/touchcopy/index.php
Best of luck.

Time constraint 1 to be deleted ?

Similar Messages

Maybe you are looking for