Time dependent extraction from ODS to masterdata datatarget type

Hi Guys,
I have a model with a ODS that replicate to a infobject defined as dataprovider.
From the ODS I am sending the date_from and date_to; as 0calday, the values taked for the masterdata are 0calday for datefrom and dateto.
In the master data there are 2 navegationals characteristics and these are time dependent.
When I do a selection in a infocube, the values for this navegational time dependent filled with a ODS to the master data is the current value, always.
I have somes ideas of the situation as:
1.- The replicate from ODS to masterdata infoprovider type deactivate the time dependent functionality.
2.- The navegational attribute in infocube hasn`t a referential key date. In teh selection I am putting the 0date.. from-to. The values is the current value not time dependent value.
Any comment is very important.
Regards,
Jeysi

The ODS treatment for time dependent and master data datatarget is different to treatment to the direct master data.
Basically, the automatic control is lost when the master data is filled from other datatarget.

Similar Messages

How to remove time dependent attributes from 0VENDOR- Please help

Hi All,
As part of master data enhancement, I had added some time dependent attributes to Vendor Master object. After activating, the respective time dependent tables were all created/activated.
Now due to change of requirements, when I am trying to convert the time dependent attributes to non time dependent, I keep getting the activation error because it keeps giving a message "Unable to change the primary key" for MVENDOR. This view is getting the DATETO field because of the original activation. It is not removing that field and is causing the issues.
Even if I adjust/delete the QVENDOR table in SE14 and then try to activate 0VENDOR, it is still retaining the DATETO field in the MVENDOR view and is recreating the QVENDOR table.
I even tried to delete the time-dependent fields from the 0VENDOR (instead of just de-selecting the time dependent flag)...it is saving the changes..but giving activation error.
Is it not possible to delete the time dependent attributes from the Master data...once they are added ?
Please advice.
Any help with this will be greatly greatly appreciated.
At this point 0VENDOR is in inactive state.

Hi Friends,
First of all, sorry I did not get a chance to respond earlier. There was an issue with my p/w for some strange reason and could not log back in till today.
Also, thank you for all your suggestions.
However, the issue is now fixed. Basically I had already explored and tried every option suggested int his forum, but was still having issues.
The problem was that there was another table in the system that had a reference to this Master Data table field (as a foreign key). After I removed the foreign key referece in the other table, then it let me proceed further.
Thanks again..

Data Extraction from ODS to Infocube

Hi.
How will you extract data from ODS to Infocube. what is process ?
please explain....

Hi,
as the no.. of records arelot more then your usual loading ..
so it will take mmuch more time today ..but make sure that the job is running fine..
You can create load the data by creating selection but at this point i dont think you can do this.. because for this you have to kill the job ..may be some changes would have been happened
in the Ip thats why its picking more records..
hope this helps you ...
Reagds,
shikha

Info-spoke extraction from ODS ending in DB error - Urgent!!!

Hello All,
I'm having a problem scenario where we have deltas from an ODS going to an Info-spoke. In the BADI for the Info-spoke, it has code which does a look-up on another ODS to read some fields that correspond to the target structure of the Info-spoke.
As part of the process, it also stores some records in a custom Z-Table based on some specific-criteria.
Given below are the observations:
It ran successfully in Dev and in QA it ran successfully for the first time. Then on, it is failing consistently on the below error:
Error in SQL Statement: DBIF_RSQL_INVALID_RSQL
System error: RSDRC / FORM DATA_GET_ODS RSDRC / FORM DATA_GET_ODS RSDRC /
Extraction Cube : Error in DataManager API.
Please find also the consistent 'system log' message for the failure.
"An SQL statement was executed that conflicts with a restriction on the
database system. This restriction may be one of the following:
- the length of the statement exceeds the permitted limit
- the statement contains too many input variables
- the total of the input and output values exceeds the
buffer space for it in the database interface
All these restrictions depend on the database. To find out which of
these restrictions was exceeded, look at the entry in the developer
trace that was written at the same time as this system log message. To
view the developer trace, use transaction ST11. The message is in the
file "dev_wi", where i stands for the number of the work process. These
restrictions are usually only exceeded if highly dynamic statements are
used, such as when input values are sent in RANGE tables. In this case,
you may have to split the complex statement into multiple statements
with smaller RANGE tables."
The custom Z-Table mentioned earlier has technical-settings which corresponds to a table-size of 1000-10000 records. Does the system log has anything to do with the buffer allocated with some SELECT statements or with the Z-table buffer itself.
I would really appreciate if someone could please give some pointers on the same.
Thanks,
-Amar

Hello Anand Raj,
The error says that the length of the SELECT statement is exceeded. I did go through the info-objects of the Z-Table and everything seems to be fine.
Any other possible thoughts??...
Thanks,
-Amar

EXTRACTION FROM ODS TO ODS

Hi all,
can anyone tell me how do we extract data from one ods to another ods..
Thanks in advance...
S ram

Then start by creating the update rules for the ODS you want to load to. Right clikc this ODS in RSA1 screen and choose Create Update rules. In the InfoSource choose the 8ODS1 InfoSource (ODS1 is the ODS where you want to load from). Activate the Update rules. Then goto RSA1 > InfoSources and search for the same ODS. Under this create the InfoPackage and execute the load. As Voodi asks...are you on BI NW2004s? The above will work for BW 3.x.
Hope this helps...

Moving time-dependant data from one table to another (archiving)

Hello all
I would like to know if there's an easier solution or a "best practice" to move data from one table to another. The context of this issue can be found within "archiving".
More concretely: we have an application that uses several tables to log information to.
These tables are growing like crazy, and we would like to keep only "relevant" data in those tables, so I was thinking about moving data from these tables that have been in there for, say 2 months, to "archiving" tables.
I figured there must be some kind of "best practice" to get this done.
I have already written a procedure that loops the table that has the time indicator and inserts the records from the normal tables into the archive tables (and afterwards delete this data), but it seems to be taking ages to get it done.
Thanks in advance!
Message was edited by:
timschraepen

There is nothing to do with PL/SQL.
You can refer below links:
http://www.lc.leidenuniv.nl/awcourse/oracle/server.920/a96524/c12parti.htm
http://www.stanford.edu/dept/itss/docs/oracle/10g/server.101/b10739/partiti.htm#i1006727

WBS Element Time Dependant

Hi Gurus,
Can we make WBS Element has Time Dependant and extract the time dependent hierarchy from R/3.
Thanks in advance.

Account Assignment Category A is for the Direct Acquisition of Asset through MM. Here consumption posting is A. And stock is plant stock. There is not at all linkage with Project in that case.
As stated, You need to use PS account assignment category & Cost Element cat. 90 for budget availability control
Below Note will be helpful to you.
Note 202053 - Statistical cost elements f.balance sheet accounts
Note 75980 - Creat.cst elem: KS036 "G/L acc. & is a bal.sh.accnt"
With Regards
Nitin P.

Regarding performance issue in time dependent hierarchie.

hai
we are loading time dependent hierarchies from flatfile to bw,it is weekely load,we have nearly one million records loaded,we got an issues regarding change of these hierarchies timely.when ever there occurs a change in hierarchy a new row is added to the table,it is degrading the performance,can any one of you please suggest how to over come performance related issues regarding time dependent hierarchies.
Regards
Srinivas.G

hello deven,
if you are only focusing on your application's performance
on the aspect of usability i.e. less waiting time, fast
response UI, i would personally suggest you to use AJAX.
put some processing part on the browser side and making
data retrieval from MI asynchronous... this way, your user
don't have to wait for all data to be presented, but rather
could work on the data presented in pieces (i.e. asynchronously).
anyway try googling for AJAX...
regards
jo

Report on time dependant master

Hi,
I want to write a query on Equipment master giving me Plant wise Month Year wise count of active equipments.
For example :
I have following data in 0Equipment
Equipement--PlantValid from date----- Valid To date
1001--XYZ--01/01/2008--
30/03/2008
1002--XYZ--01/02/2008--
30/05/2008
1003--ABC--01/01/2008--
30/11/2008
1004--ABC--01/04/2008--
30/11/2008
1001--ABC -01/04/2008--
30/06/2008
Report required is:
Jan/2008---Feb/2008-Mar/2008-Apr/2008-May/2008-Jun/2008---Jul/2008
XYZ--1221--
1
ABC--111333--
2
0Equipment is time dependant (valid from date - valid to date) characteristics.
Please help.
Rgds,
Deepak
Edited by: Deepak S on Feb 10, 2009 3:04 PM
Edited by: Deepak S on Feb 10, 2009 3:12 PM

Hi Deepak,
Try this,
Put, Plant in rows , 0calmonth in columns. Under 0CALMONTH, create a structure, create a formula --with only on formula variable ZEMP. Variable ZEMP is then processed by replacement path and is replaced by the infooobject key.
In the formula properties in Calculation tab mention calculate single values as count.
Hope it helps,
Regards,
Sunmit.

Time dependant Heirarchy upload using flat file

Hello,
I have created all the procedure required for time dependant heirarchy from blog "http://www.sdn.sap.com/irj/scn/weblogs;jsessionid=(J2EE3417700)ID0251631050DB01275680198710677010End?blog=/pub/wlg/3113".
While loading data using IP, I am getting error 'Error 8 when compiling the upload program: row 661, message: A newer version of data type /BIC/B0011807000 was' . I have activated transfer rules, datasource and also executed program 'RS_TRANSTRU_ACTIVATE_ALL'. But the same error persist.
How to maintain these values Date-To and Date-f

Hi Naveen,
The date in infopackage mentioned is 01.01.2009 to 31.12.9999.
The structure in flat file is 20090101(yyyymmdd)
I am getting an error mentioned above in thread.
Please suggest me
Thanks,
Sonu

Replacing DSO with InfoObject for storing time-dependent master data

Hi Gurus,
currently I am storing time-dependent contract items in a DSO. The posting items are enriched with this master data as well as some other transaction data into another consolidated DSO, which includes the time-dependency (valid from & valid to) as well for better performance. But this means that we will have a large number of records, because 1 new posting item could end up with few posting items more due to the versions of contract item.
Since there are many posting items (>50 millions yearly, daily peak 1-2 million) and the complexity with delta management, I am considering whether to use an InfoObject for storing the contract items. The number of contract items are not many, about 300,000 after migration and about 10,000 each month.
Hence, I would like to ask whether this approach is feasible? Is there a size limit for a master data InfoObject?
Thanks in advance.
Regards,
Meng

hi,
The Time dependent MD object will create the same number of records for the contract item (maybe more) as each contract item will have different record for different time frame.
this can be better explained with example.
let us say you have 1 contract item with 2 entries one valid from 2007-2008 and the other from 2008 onwards.
In DSO this will create 2 records, in time dependent MD object it would also create 2 records.
In the infopackage for the MD you would need to provide the interval (time range) for the MD.
if you provide it as 2007 till 2999 then two records will be created one with 2007-08 and other valid from 2008-999.
However as there would be other contract items which would have lower date say 2006 then this contract item would create 3 rows, 1 row for 2006-07 with blank values, 2nd for 2007-08 and 3rd for 2008-999. This way it has more number of records than the DSO.
In case of MD object you may not be able to delete data as well in future if the object is used in some other place.
There will be many pros and cons of the approach you are thinking and you would have to weigh them and decide.
regards,
Arvind.

Time dependent Hirerachy data not display at query level

Hi all,
I have loaded a time dependent hirerachy from flatfile,it showing same data as in flat file at RSMO,where as if I am executing query ,report displaying in hirerachy structure format,but DATE-TO and DATE-FROM are not displaying .
Ex:On ZEMPLYOE i have created ZMANAGER as hirerachy,report giving ZMANAGER&ZEMPLOYEE details correctly in hirerachical format,but Date-to and Date-from are not displaying at report level,where as entair data is loaded to ZEMPLOYE without any error.
If any one has come across the same situation,what are additional steps need to have take.
your help will be appreciated
Regards,
Praveena.

Yes, date-from and date-to are not meant to be displayed in the report.
Let me take an example to tell the purpose.
Suppose your hierarchy displays employees managerwise.
If you create hierarchy telling
from 01-01-2009 to 31-03-2009, employee E1 will report to Manager M1
from 01-04-2009 to 31-05-2009 , E1 will report to M2.
then, until March, E1 will be displayed under M1 node in the report, and in April and May, he will be displayed under M2 node.
So, we create hierarchy only once, but they change in the report depending on the month.
Hope this helps.

Time dependent Vendor (LFB1)

Hi gurus,
I'm quite new in this topic, so sorry if it seems basic question
Would it be possible to add into LFB1 table, fields Valid to (DATBI) and Valid From (DATAB) in order to have time depend attributes from vendor? If yes, how would you do this? If no, do you see any alternative to have time dependent payment terms in BW?
Thanks

Joan,
Vendor Master Data has only Withholding taxes with time dependent fields. I've never seen another fields like that.
Please, take a look in link bellow and search for this issue in another tecnical forum. I don't think you will get solution here Concerning Functional Vendor analysis.
http://help.sap.com/saphelp_nw04/helpdata/en/13/c3e7379899d06fe10000009b38f8cf/content.htm
Regards

Extraction into Time dependent info object

Dear all,
In r/3 the field is time independent and want to extract the data into time dependent infoobject in bw.
what is the procedure to do it.
Regards,
BPNR.

Hi BPNR,
You have two options:
1. Make the info-object time independent and pull the data from R/3.
2. Hard code the Date to and Date from fields in the infopackage to extreme values say 01/01/1900 to 31/12/9999 and extract the data from R/3.
Hope this helps.

Load from ODS into InfoCube gives TIME-OUT runtime error after 10 minutes ?

Hi all,
   We have a full load from ODS into InfoCube and it was working fine till the last week upto with 50,000 records. Now, we have around 70,000+ records and started failing with TIME_OUT runtime error.
   The following is from the Short Dump (ST22):
   The system profile "rdisp/max_wprun_time" contains the maximum runtime of a
program. The current setting is 600 seconds. Once this time limit has been exceeded, the system tries to terminate any SQL statements that are currently being executed and tells the ABAP processor to terminate the current program.
The following are from ROIDOCPRMS table:
   MAXSIZE (in KB) : 20,000
   Frequency       : 10
   Max Processes : 3
When I check the Data Packages under 'Details' tab in Monitor, there are four Data Packages and the first three are with 24,450 records. I will right click on each Data Package and select 'Manual Update' to load from PSA. When this Manual Update takes more than 10 minutes it is failing with TIME_OUT again.
How could I fix this problem, PLEASE ??
Thanks,
Venkat.

Hello A.H.P,
The following is the Start Routine:
PROGRAM UPDATE_ROUTINE.
$$ begin of global - insert your declaration only below this line -
TABLES: /BIC/AZCPR_O0400, /BIC/AZCPR_O0100, /BIC/AZCPR_O0200.
DATA: material(18), plant(4).
DATA: role_assignment like /BIC/AZCPR_O0100-CPR_ROLE, resource like
/BIC/AZCPR_O0200-CPR_BPARTN.
$$ end of global - insert your declaration only before this line   -
The follow definition is new in the BW3.x
TYPES:
BEGIN OF DATA_PACKAGE_STRUCTURE.
     INCLUDE STRUCTURE /BIC/CS8ZCPR_O03.
TYPES:
     RECNO   LIKE sy-tabix,
END OF DATA_PACKAGE_STRUCTURE.
DATA:
DATA_PACKAGE TYPE STANDARD TABLE OF DATA_PACKAGE_STRUCTURE
       WITH HEADER LINE
       WITH NON-UNIQUE DEFAULT KEY INITIAL SIZE 0.
FORM startup
TABLES   MONITOR STRUCTURE RSMONITOR "user defined monitoring
           MONITOR_RECNO STRUCTURE RSMONITORS " monitoring with record n
           DATA_PACKAGE STRUCTURE DATA_PACKAGE
USING    RECORD_ALL LIKE SY-TABIX
           SOURCE_SYSTEM LIKE RSUPDSIMULH-LOGSYS
CHANGING ABORT LIKE SY-SUBRC. "set ABORT <> 0 to cancel update
$$ begin of routine - insert your code only below this line        -
fill the internal tables "MONITOR" and/or "MONITOR_RECNO",
to make monitor entries
   clear DATA_PACKAGE.
   loop at DATA_PACKAGE.
      select single /BIC/ZMATERIAL PLANT
         into (material, plant)
         from /BIC/AZCPR_O0400
         where CPR_EXT_ID = DATA_PACKAGE-CPR_EXT_ID
         and ( MATL_TYPE = 'ZKIT' OR MATL_TYPE = 'ZSVK' ).
       if sy-subrc = 0.
          DATA_PACKAGE-/BIC/ZMATERIAL = material.
          DATA_PACKAGE-plant = plant.
          modify DATA_PACKAGE.
          commit work.
       endif.
       select single CPR_ROLE into (role_assignment)
                     from /BIC/AZCPR_O0100
                     where CPR_GUID = DATA_PACKAGE-CPR_GUID.
        if sy-subrc = 0.
          select single CPR_BPARTN into (resource)
                     from /BIC/AZCPR_O0200
                     where CPR_ROLE = role_assignment
                     and CPR_EXT_ID = DATA_PACKAGE-CPR_EXT_ID.
               if sy-subrc = 0.
                  DATA_PACKAGE-CPR_ROLE = role_assignment.
                  DATA_PACKAGE-/BIC/ZRESOURCE = resource.
                  modify DATA_PACKAGE.
                  commit work.
               endif.
          endif.
       clear DATA_PACKAGE.
       endloop.
if abort is not equal zero, the update process will be canceled
ABORT = 0.
$$ end of routine - insert your code only before this line         -
Thanks,
Venkat.

Time dependent extraction from ODS to masterdata datatarget type

Similar Messages

Maybe you are looking for