Time Management _selection Rules

Hi all,
What is the use of selection rule concept in Time management Module....
How we will use this in real time...can any one of u explain me in detail with good examples...
is there any relation between these two table T553A and T553S?
Thanks & Regards,
Avanthika.k

Hi,
Please go through the attached thread which is giving the information with examples...
Time management-day type selection rule
Best Regards,
enkat.
Edited by: Venkateswara Sarma Bhamidipati on Feb 11, 2011 3:43 AM

Similar Messages

Time Management - Building Rules

Hi All,
How to built rules in Time management so tht one absence type cannot be followed by another absence type for example Medical leave cannot be followed by Piad Leave but can be followed by Casual leave. ?

I am also working on time managment module and my scenario is CL should not be combined with any other type of leave (PL, SL). I was tring to chk the program - SAPMYXYWS90300017H, but could not find as to which transaction code to look in... Can U please tell me how to access this program..I have tried exploring it in se80 & se38...
Thanx

Leap Year and Schema & Rules on Time Management

Hello,
On Time management, do you know how to configure on Schema & Rules if the year is a leap year?
Thanks, julien
Edited by: Julien on May 6, 2009 6:33 PM

Thanks for all,
My solution below :
ZFA/ 008 ACTIO ZFAF                    Leap Year
ZFAF*****         PPCYGZFA1 NEXTR A
ZFAF*****        APPCYGZFA2 NEXTR B
ZFAF*****        BPPCYGZFA3 NEXTR C
ZFAF*****        CZPAYTP 1
ZFAF1****         DHRS=DINR2 HRS-DINR4 HRS+DINR6 ADDDBINR7ZHRS?1
ZFAF1*****         HRS=365   ADDDBINJAZ
ZFAF1****=         HRS=366   ADDDBINJAZ
ZFA1*****         ZHRS=BCURYRHRS/400   ADDDBINR1ZROUNDH>60 PAYTP 1
ZFA11****         DHRS?DINR1
ZFA11*****         HRS=0     ADDDBINR2Z
ZFA11****=         HRS=1     ADDDBINR2Z
ZFA2*****         ZHRS=BCURYRHRS/100   ADDDBINR3ZROUNDH>60 PAYTP 1
ZFA21****         DHRS?DINR3
ZFA21*****         HRS=0     ADDDBINR4Z
ZFA21****=         HRS=1     ADDDBINR4Z
ZFA3*****         ZHRS=BCURYRHRS/4     ADDDBINR5ZROUNDH>60 PAYTP 1
ZFA31****         DHRS?DINR5
ZFA31*****         HRS=0     ADDDBINR6Z
ZFA31****=         HRS=1     ADDDBINR6Z

What are the major challenges for the end-user in using Positive Time Management

Hi Seniors,
Can anybody please provide me some data on the same.
Thanks.

Hi,
Positive time management is slightly difficult to implement compared to negative time management.
In negative time management, you use planned working times + deviations in time evaluation.
In positive time management, you record actual times through time recording system. You have to bring these times to SAP through an interface and then evaluate the actual times against the planned times and accordingly pay them out. You would need to pay attention regarding the integration between SAP R/3 and time recording system.
Building rules for positive time management is slightly more challenging compared to negative time management.
Kindly go through the below documents on positive time management which will give you more idea about the same.
Integration of Time Recording Terminals with SAP R/3
Determination of First Clock In & Last Clock Out in Positive Time Evaluation
Late Coming, Early Going and Unauthorized absence
Prorated Grant of Absence Quota for Contract Period in Time Evaluation
Splitting of Overtime Hours after X Hours in Time Evaluation
Rounding off Overtime Hours Generated via T510S table in Time Evaluation
Public Holiday Calendar and Work Schedule Rules
I hope these are helpful to you.
Thanks and regards,
Vivek Barnwal

Query on Time Management Status

Dear Team,
Scenario:
We have some employees wherein the time evaluation will be evaluated for the status of 9 in Planned Working Time Infotype. After a period of time, these employees will be sent for education and no leaves are entitled. In this case, the time management status will be changed to 0. No time evaluation.
The accrued leaves will still be available for the employee while going to this education for example 20 days.
We have customized a rule, which will carry forward the last year balance to the current year balance on every 1st of the year.
In the above case, if an employee completes his education and returns back in the middle of the year other than the 1st day of the year, in this case, the carry forward of leave is not taking place.
My assumptions:
I would like to know an operation which would query the Previous Day Time Management Status and Current Day Time Management Status. If I can able to do this, if it is YES, the last old previous balance to be carried forward....
Please let me know if any other alternative method.
Thanks and Regards
Team Member.
Edited by: Patlolla Mallikarjun on Apr 26, 2010 8:35 PM

Hello Mallikarjun,
If you are planning on controlling thru a rule in schema, you can approach this way. Whenever an EE returns from education, change IT0007 time mgmt status to 9 along with additional time indicator say 'ED'. You can query the additional time indicator status in a rule thru the operation 'OUTWPATIND'. Hope this helps your requirement.
Best Regards,
Sunny

Flow of Time Management Configuration.

Hello Guys,
Please explain me the flow of SAP Time Management during the configuration. It will help everyone to understand the process step by step
Thanks & Regards

Steps for IT0007
Define Public Holiday Classes
Personnel Subarea Groupings
Daily Work Schedules
Period Work Schedules
Work Schedule Rules and Work Schedules
Steps for IT2001 and 2006
Group Personnel Subareas for Attendances and Absences
Define Absence Types
Determine Entry Screens and Time Constraint Classes
Define Counting Classes for the Period Work Schedule
Group Employee Subgroups for Time Quotas
Group Personnel Subareas for Time Quotas
Define Counting Rules
Define Absence Quota Types
Permit Generation of Quotas in Time Evaluation
Specify Rule Groups for Quota Type Selection
Set Base Entitlements
Determine Validity and Deduction Periods
Define Rules for Rounding Quota Entitlements
Define Generation Rules for Quota Type Selection
Define Deduction Rules for Absence and Attendance Quotas
Assign Deduction Rules to Counting Rules
Best Regards

Design of Time Management infocube

Hi, I need the help of HR BW experts!!!
The scenario is this:
1) I'm loading transactional data for time and accidents through Flat files into an ODS
2) My final cube, must have the 0EMPLOYEE and their attributes as well to use in reports
3) I know master data 0EMPLOYEE is time dependant.
4) I added attributes as fieds in my Cube (for performance reasons). The question is WHICH IS THE BEST WAY TO FILL ALL ATTR?
I'm looking at the standard. In the doc there is 2 routines: Personne and a Global routine. But I can not see them!!! Even this, I understand that this attributes must be filled with the values according to the date of loadind (business rule).
So, do I have to create a function - routine to read master data according to the DATE of loading?
Or it is already done in the standard?
In SAP note 336229, it says:
4.All attributes of 0PERSON and 0EMPLOYEE must be time-dependent.
Maintenance of the validity slice (Transaction RSDV) for InfoCube 0PAPA_C02 after the first load of data:to-mode 'Fixed value' and '31.12.9998' as a date
What is it? Can apply for PT??
Please, if somebody has implemented this, PT information, Time Management, tell me which is the best solution for this, having into account performance issues.
Thank you!!
Regards
Rosana

0employee has time dependent attributes.
So, when you are loading the transactional data, the system will check the attribute value, which is valid currently and load the data accordingly.
Lets say
0employee   Valid from    Valid to           Country
10001           21.03.2008   22.03.2009      IN
10001           23.03.2009    31.12.9999     SG
Country is an attribute of 0employee.
When you are loading the data today, the system will check the valid country ( country = SG is valid today) and fill the attributes.
Hope this is clear.
Ravi

PCRs of time management

hi experts
kindly provide the list of all the PCRs of time management schema TM04 with description.
so that i can understand which rule is used to do what.
as im trying to learn about rules, functions & operations.
i also request the list of Funtions and operations on time management schema TM04.
i understand i can pick them up from pe02 and pe04 and i tried it too but i really need them as soon as possible
and its taking time for me to work around so once u experts provide me the list of rules function and operations of
time managemnt i can work on them more effectively with certain data in my hand.
Please provide me the list of rules ,fucntions and operations.
special request to my favorite members(sikindar,anantha prakash,Ram manohar)
regards

Hello Sikandar,
Can you also kindly forward me TM Schema and PCR docs..Im a complete layman in these areas, though ive a brief understanding of how it functions.Also do uve any idea on End user manuals and HR Report Management, I mean docs on how to generate reports by an Enduser, especially payroll related. If so kindly do help me.
Thanks a million in Advance,
[email protected]

Hierarchy of Time Management Terms

Hi Gurus,
I am new to Time Management.
I was going through the Help for Time Management. But very much confused with the terms Work Shcedule, Daily Work Schedule, Personnel Subarea grouping, Personal Work Schedule, Periodic Work Schedule, Break Schedule, Work Schedule Rule etc. I understood each and everyt term. But was unable to establish a hierarchy among them.
Can somebody give a clear picture of this hierarchy.
Thanks,
Sankar.

Hello Sankar,
Ok, here you go:
The basic unit in time management to form a time schedule is the Daily work schedule (DWS). This is customized in table T550A. In this table you must set all the parameters that form your schedule. So first you have to define if the schedule is flexible or not and whether it has breaks or not. If it has breaks, you have to customize them first in table T550P and then assign them to your DWS.
After you do this, you have to customize the period work schedules (PWS) in table T551A. These are no other than sequences of DWS. So for example you can have a normal office shift that goes from Mondays to Sundays, with Saturdays and Sundays off, repeated every week. So your PWS will be a sequence of 5 equal DWS plus two DWS with zero working hours for Sat and Sun.
After you do this, you have to customize your DWS rules in table T508A, that are actually a PWS with a starting point. Think of the PWS as a wheel: your shifts are sequences of steps that repeat themselves periodically, like the normal weekly office shifts. But this is not enough to identify what DWS the employee has to do a specific day, since you have to tell the system when exactly to set the starting point for the sequence. You do this by customizing a DWS rule. This is the "object" that you assign to the employee in infotype 0007.
Of course, like many concepts in HR, DWS, PWS, breaks and DWS rules are customized by groupings of employees and / or personnel areas and subareas. I suggest that you take a look at the tables I mentioned to have an idea on how to set these groupings.
Good luck!
Rodrigo

Time management configuration

Hi
I required the doc. of time managent configuration...
Regards
Tapashi Saha

Hi Dude,
The following is the config. of TM
IMG --> Personnel Time Management --> Work Schedules --> Define Public Holiday Classes
IMG --> Personnel Time Management --> Work Schedules --> Personnel Subarea Groupings --> Group Personnel Subareas for the Work Schedule
IMG --> Personnel Time Management --> Work Schedules --> Personnel Subarea Groupings --> Group Personnel Subareas for theDaily Work Schedule
IMG --> Personnel Time Management --> Work Schedules --> Daily Work Schedules --> Define Daily Work Schedules
IMG --> Personnel Time Management --> Work Schedules --> Period Work Schedules --> Define Period Work Schedules
IMG --> Personnel Time Management --> Work Schedules --> Day Types --> Define Day Types
IMG --> Personnel Time Management --> Work Schedules --> Day Types --> Define Day Types
IMG --> Personnel Time Management --> Work Schedules --> Day Types --> Define Special Days
IMG --> Personnel Time Management --> Work Schedules --> Work Schedule Rules and Work Schedules --> Define Employee Subgroup Groupings
IMG --> Personnel Time Management --> Work Schedules --> Work Schedule Rules and Work Schedules --> Define Groupings for the Public Holiday Calendar
IMG --> Personnel Time Management --> Work Schedules --> Work Schedule Rules and Work Schedules --> Set Work Schedule Rules and Work Schedules
IMG --> Personnel Time Management --> Work Schedules --> Work Schedule Rules and Work Schedules --> Generate Work Schedules Manually
IMG --> Personnel Time Management --> Work Schedules --> Planned Working Time --> Set Default Value for the Work Schedule
IMG --> Personnel Time Management --> Work Schedules --> Planned Working Time --> Set Default Value for Time Management Status
IMG --> Personnel Time Management --> Time Data Recording and Administration -->Substitutions --> Define Personnel Subareas for Substitution Types
IMG --> Personnel Time Management --> Time Data Recording and Administration -->Substitutions --> Set Defaults for Substitution Types
IMG --> Personnel Time Management --> Time Data Recording and Administration --> Absences --> Absence Catalog --> Group Personnel Subareas for Attendances and Absences
IMG --> Personnel Time Management --> Time Data Recording and Administration --> Absences --> Absence Catalog --> Define Absence Types
Edited by: Raghunath Shyamala on May 18, 2009 6:35 AM

ISE Time Management for Sponsor Portal User

Hi all,
I'm currently using ISE version 1.2 and when I create a custom time management for each user, the rule applied to each user is only applied for a maximum 10 days eventhough I configured it for ex.30 days.
want to check with all of you if anyone have the same issue?
Firstly I think it's because the purge time is default set for 15 days, but even when I already changed it. The expiration time will still not get over than 10 days.
Cheers
Ryan

Default Guest Time Profiles
Time profiles provide a way to give different levels of time access to different guest accounts. Sponsors must assign a time profile to a guest when creating an account, but they cannot make changes to the time profiles. However, you can customize them and specify which time profiles can be used by particular sponsor groups. Beginning with Cisco ISE 1.2 time profiles are referred to as the account duration in the Sponsor portal.
Cisco ISE 1.2 includes these default time profiles, which replace the profiles available previously:
•DefaultFirstLoginEight—the account is available for 8 hours starting when the guest user first successfully connects to the Guest portal. This replaces the DefaultFirstLogin time profile.
•DefaultEightHours—the account is available for 8 hours starting when sponsors first create the account. This replaces the DefaultOneHour time profile.
•DefaultStartEnd—sponsors can specify dates and times on which to start and stop network access.
If you upgrade to Cisco ISE 1.2, the older time profiles are still available, but you can delete them if you are not using them. If the older time profiles are assigned to a sponsor group, a message alerts you before deleting. If you perform a new installation of Cisco ISE 1.2, only the new time profiles display.

Time management configuration/ ESS MSS configuration documents

hello Xperts,
do any one have Configuration documents for time management and ESS/MSS Pls forward to me
shanker366atgmail.com

Hi,
Time management Config.
The following is the config. document of TM. check the threads u will get some more good responses and close the thread if u find the response is good enough
I think its helpful to u.
IMG  Personnel Time Management  Work Schedules  Define Public Holiday Classes
IMG  Personnel Time Management  Work Schedules  Personnel Subarea Groupings  Group Personnel Subareas for the Work Schedule
IMG  Personnel Time Management  Work Schedules  Personnel Subarea Groupings  Group Personnel Subareas for theDaily Work Schedule
IMG  Personnel Time Management  Work Schedules  Daily Work Schedules  Define Daily Work Schedules
IMG  Personnel Time Management  Work Schedules  Period Work Schedules  Define Period Work Schedules.
IMG  Personnel Time Management  Work Schedules  Day Types  Define Day Types.
IMG  Personnel Time Management  Work Schedules  Day Types  Define Day Types.
IMG  Personnel Time Management  Work Schedules  Day Types  Define Special Days.
IMG  Personnel Time Management  Work Schedules  Work Schedule Rules and Work Schedules  Define Employee Subgroup Groupings
IMG  Personnel Time Management  Work Schedules  Work Schedule Rules and Work Schedules  Define Groupings for the Public Holiday Calendar.
IMG  Personnel Time Management  Work Schedules  Work Schedule Rules and Work Schedules  Set Work Schedule Rules and Work Schedules.
IMG  Personnel Time Management  Work Schedules  Work Schedule Rules and Work Schedules  Generate Work Schedules Manually
IMG  Personnel Time Management  Work Schedules  Planned Working Time  Set Default Value for the Work Schedule.
IMG  Personnel Time Management  Work Schedules  Planned Working Time  Set Default Value for Time Management Status.
IMG  Personnel Time Management  Time Data Recording and Administration  Substitutions  Define Personnel Subareas for Substitution Types.
IMG  Personnel Time Management  Time Data Recording and Administration  Substitutions  Set Defaults for Substitution Types.
IMG  Personnel Time Management  Time Data Recording and Administration  Absences  Absence Catalog  Group Personnel Subareas for Attendances and Absences.
IMG  Personnel Time Management  Time Data Recording and Administration  Absences  Absence Catalog  Define Absence Types.
IMG  Personnel Time Management  Time Data Recording and Administration  Absences  Absence Catalog  Absence Counting  Define Counting Classes for the Period Work Schedule.
IMG  Personnel Time Management  Time Data Recording and Administration  Absences  Absence Catalog  Absence Counting  Rules for Absence Counting (New)  Group Employee Subgroups for Time Quotas.
IMG  Personnel Time Management  Time Data Recording and Administration  Absences  Absence Catalog  Absence Counting  Rules for Absence Counting (New)  Group Personnel Subareas for Time Quotas
IMG  Personnel Time Management  Time Data Recording and Administration  Absences  Absence Catalog  Absence Counting  Rules for Absence Counting (New)  Define Rules for Rounding Counted Absences
IMG  Personnel Time Management  Time Data Recording and Administration  Absences  Absence Catalog  Absence Counting  Rules for Absence Counting (New)  Define Counting Rules
IMG  Personnel Time Management  Time Data Recording and Administration  Absences  Absence Catalog  Absence Counting  Rules for Absence Counting (New)  Define Counting Rules  Deduction rules for Absence quotas
IMG  Personnel Time Management  Time Data Recording and Administration  Absences  Absence Catalog  Absence Counting  Assign Counting Rules to Absence Types.
IMG  Personnel Time Management  Time Data Recording and Administration  Attendances/Actual Working Times  Define Attendance Types.
IMG  Personnel Time Management  Time Data Recording and Administration  Attendances/Actual Working Times  Attendance counting  Rules for Attendance counting (New)  Assign Counting Rules to Attendance Types.
IMG  Personnel Time Management  Time Data Recording and Administration  Managing Time Accounts Using Attendance/Absence Quotas  Time Quota Types  Define Absence Quota Types.
IMG  Personnel Time Management  Time Data Recording and Administration  Managing Time Accounts Using Attendance/Absence Quotas  Calculating Absence Entitlements  Automatic Accrual of Absence Quotas  Permit Quota Generation Without Time Evaluation.
IMG  Personnel Time Management  Time Evaluation  Time Evaluation Settings  Set Personnel Subarea Groupings for Time Recording.
IMG  Personnel Time Management  Time Data Recording and Administration  Managing Time Accounts Using Attendance/Absence Quotas  Calculating Absence Entitlements  Rules for Generating Absence Quotas  Set Base Entitlements  Base Entitlement for Absence Quota Generation.
IMG  Personnel Time Management  Time Data Recording and Administration  Managing Time Accounts Using Attendance/Absence Quotas  Calculating Absence Entitlements  Rules for Generating Absence Quotas  Determine Validity and Deduction Periods.
IMG  Personnel Time Management  Time Data Recording and Administration  Managing Time Accounts Using Attendance/Absence Quotas  Calculating Absence Entitlements  Rules for Generating Absence Quotas  Set Base Entitlements  Define Generation Rules for Quota Selection.
Thanks and Regards,
Revathi.

Time management

Hi Gurus,
I am trying to understand Time management concepts, pls help me on the following -
1) what is factory calendar, and special rules in factory calendar, and how is it different from holiday calendar.Is factory calendar applicable only to factories or to normal organisations under any circumstances?
2) I am trying to understand reference time in defining dynamic breaks in break schedules and i came across planned working time and normal working time. What is the difference between planned working time and normal working time?
thanks
Kavita

Kavitha
there is smthg called special rules on Factory calendar, pls check and if possible pls help me understand special rules in factory calendar.....have awarded points for ur guidance
*I BELIVE SPECIAL RULE FOR PM AND PP Module not for HR. any way thanks for asking i got new point*
*see example here*
*You do that using a special rule for the calendar. SCAL is the transaction code. Click the Maintain button then select the Factory calendar radio button and press the change (pencil) button.*
*Select your calendar then press the change (pencil) button again. Click on the Special rules button then the Create button (paper). Enter the From and To date(s) [same date if only one day] then if it WILL be a work day check the Workday field and you will need to enter Text.*
*If, for example, the day is a normal workday and you want to shut down for that date (or date range), this time leave the Workday check box empty.*
*Click the paper button when you're done entering the data then the save button (or the F-11 key). You're done.*
*This is configuration data therefore configuration for SCAL and SCA6_U must be allowed in your profile.*
also can u help me with the DWS class concept, i know DWS class 0 is for off days but what abt others 1-9, are they customer specific, and where are the DWS classes defined, i mean table name.
*DWS. 0 (work paid)*
          *1-- Off--paid*
          2Offunpaid
          3 off--special day and
          4 to 9 are customer specific are the days types.
Hope you got clarity with this
Best Regards

Configuration Guide for Time Management

Can anyone send me the configuration guide for Time Management

The following is the config. document of TM. check the threads u will get some more good responses and close the thread if u find the response is good enough
I think its helpful to u.
IMG  Personnel Time Management  Work Schedules  Define Public Holiday Classes
IMG  Personnel Time Management  Work Schedules  Personnel Subarea Groupings  Group Personnel Subareas for the Work Schedule
IMG  Personnel Time Management  Work Schedules  Personnel Subarea Groupings  Group Personnel Subareas for theDaily Work Schedule
IMG  Personnel Time Management  Work Schedules  Daily Work Schedules  Define Daily Work Schedules
IMG  Personnel Time Management  Work Schedules  Period Work Schedules  Define Period Work Schedules.
IMG  Personnel Time Management  Work Schedules  Day Types  Define Day Types.
IMG  Personnel Time Management  Work Schedules  Day Types  Define Day Types.
IMG  Personnel Time Management  Work Schedules  Day Types  Define Special Days.
IMG  Personnel Time Management  Work Schedules  Work Schedule Rules and Work Schedules  Define Employee Subgroup Groupings
IMG  Personnel Time Management  Work Schedules  Work Schedule Rules and Work Schedules  Define Groupings for the Public Holiday Calendar.
IMG  Personnel Time Management  Work Schedules  Work Schedule Rules and Work Schedules  Set Work Schedule Rules and Work Schedules.
IMG  Personnel Time Management  Work Schedules  Work Schedule Rules and Work Schedules  Generate Work Schedules Manually
IMG  Personnel Time Management  Work Schedules  Planned Working Time  Set Default Value for the Work Schedule.
IMG  Personnel Time Management  Work Schedules  Planned Working Time  Set Default Value for Time Management Status.
IMG  Personnel Time Management  Time Data Recording and Administration  Substitutions  Define Personnel Subareas for Substitution Types.
IMG  Personnel Time Management  Time Data Recording and Administration  Substitutions  Set Defaults for Substitution Types.
IMG  Personnel Time Management  Time Data Recording and Administration  Absences  Absence Catalog  Group Personnel Subareas for Attendances and Absences.
IMG  Personnel Time Management  Time Data Recording and Administration  Absences  Absence Catalog  Define Absence Types.
IMG  Personnel Time Management  Time Data Recording and Administration  Absences  Absence Catalog  Absence Counting  Define Counting Classes for the Period Work Schedule.
IMG  Personnel Time Management  Time Data Recording and Administration  Absences  Absence Catalog  Absence Counting  Rules for Absence Counting (New)  Group Employee Subgroups for Time Quotas.
IMG  Personnel Time Management  Time Data Recording and Administration  Absences  Absence Catalog  Absence Counting  Rules for Absence Counting (New)  Group Personnel Subareas for Time Quotas
IMG  Personnel Time Management  Time Data Recording and Administration  Absences  Absence Catalog  Absence Counting  Rules for Absence Counting (New)  Define Rules for Rounding Counted Absences
IMG  Personnel Time Management  Time Data Recording and Administration  Absences  Absence Catalog  Absence Counting  Rules for Absence Counting (New)  Define Counting Rules
IMG  Personnel Time Management  Time Data Recording and Administration  Absences  Absence Catalog  Absence Counting  Rules for Absence Counting (New)  Define Counting Rules  Deduction rules for Absence quotas
IMG  Personnel Time Management  Time Data Recording and Administration  Absences  Absence Catalog  Absence Counting  Assign Counting Rules to Absence Types.
IMG  Personnel Time Management  Time Data Recording and Administration  Attendances/Actual Working Times  Define Attendance Types.
IMG  Personnel Time Management  Time Data Recording and Administration  Attendances/Actual Working Times  Attendance counting  Rules for Attendance counting (New)  Assign Counting Rules to Attendance Types.
IMG  Personnel Time Management  Time Data Recording and Administration  Managing Time Accounts Using Attendance/Absence Quotas  Time Quota Types  Define Absence Quota Types.
IMG  Personnel Time Management  Time Data Recording and Administration  Managing Time Accounts Using Attendance/Absence Quotas  Calculating Absence Entitlements  Automatic Accrual of Absence Quotas  Permit Quota Generation Without Time Evaluation.
IMG  Personnel Time Management  Time Evaluation  Time Evaluation Settings  Set Personnel Subarea Groupings for Time Recording.
IMG  Personnel Time Management  Time Data Recording and Administration  Managing Time Accounts Using Attendance/Absence Quotas  Calculating Absence Entitlements  Rules for Generating Absence Quotas  Set Base Entitlements  Base Entitlement for Absence Quota Generation.
IMG  Personnel Time Management  Time Data Recording and Administration  Managing Time Accounts Using Attendance/Absence Quotas  Calculating Absence Entitlements  Rules for Generating Absence Quotas  Determine Validity and Deduction Periods.
IMG  Personnel Time Management  Time Data Recording and Administration  Managing Time Accounts Using Attendance/Absence Quotas  Calculating Absence Entitlements  Rules for Generating Absence Quotas  Set Base Entitlements  Define Generation Rules for Quota Selection.
Edited by: Sikindar on Feb 11, 2008 6:05 PM

"Time Management" top urgent pls respond

HI All,
I have configured payroll with time Absence but time management status is 7
the payroll is giving this error, can any one help me out.
00000503 Payroll Sanjay
    Wage type generation requested for period: 200601
    Fr.: 01.04.2006 To : 30.04.2006
    04.04.2006 Tuesday
        IF              GWT       Not if full-day absence without WT
            Processing
                No entry in table $ for key $ 554C    400111 20060
                Technical error no. 72
                04.04.2006 Processing terminated for EE 00000503 Payroll Sanjay
I have checked this 554C and added a technical wage type
still it is not working,
Please let me know what I have to do
Thanks
Veer

Hi Veeresh I dont think the table T554C is for any technical wagetypes.
This is the view maintained for absence valuation in PAyroll.For instance this is used to prorate ur salary as per the number of loss of pay days.
U have to maintain
AbsValGrpg       Valuation rule    StartDate   EndDate
01                   11            01.01.1999 31.12.9999
Hope this helps U removing the error.
Award Points if Helpful

Time Management _selection Rules

Similar Messages

Maybe you are looking for