Time out (over 600sec)

Hi all,
I have a big problem about performance, the code below give me time out (over 600sec).
Are there something worng? What should I do? tell me please
Thanks in advance.
Tiwa,
Regards.
LOOP AT t_vbap.
    r_vbap-sign    = 'I'.
    r_vbap-option = 'EQ'.
    r_vbap-low     = t_vbap-vbeln.
    APPEND r_vbap.
ENDLOOP.
DELETE ADJACENT DUPLICATES FROM r_vbap COMPARING low.
" about 6000 rows in r_vbap
SELECT vbepvbeln vbepposnr vbepetenr vbapmatnr vbap~spart
         vbapwerks vbepwmeng vbepbmeng vbepvrkme vbep~edatu
INTO TABLE t_osto_tmp
FROM vbap INNER JOIN vbep ON
       vbapvbeln = vbepvbeln AND
       vbapposnr = vbepposnr
       INNER JOIN vapma ON
       vapmavbeln = vbapvbeln AND
       vapmaposnr = vbapposnr
WHERE vbap~vbeln IN r_vbap.

Hi John Armytage,
The code that I posted it is a part of this code below,
LOOP AT t_vbap.
    r_vbap-sign    = 'I'.
    r_vbap-option = 'EQ'.
    r_vbap-low     = t_vbap-vbeln.
    APPEND r_vbap.
ENDLOOP.
DELETE ADJACENT DUPLICATES FROM r_vbap COMPARING low.
SELECT vbepvbeln vbepposnr vbepetenr vbapmatnr vbap~spart
         vbapwerks vbepwmeng vbepbmeng vbepvrkme vbep~edatu
INTO TABLE t_osto_tmp
FROM vbap INNER JOIN vbep ON
       vbapvbeln = vbepvbeln AND
       vbapposnr = vbepposnr
       INNER JOIN vapma ON
       vapmavbeln = vbapvbeln AND
       vapmaposnr = vbapposnr
WHERE vbap~vbeln IN r_vbap.
AND vbep~edatu <= sy-datum
AND vapma~vtweg IN s_vtweg. " distribution channel
Can I see distribution channel in other tables?
If I can please let me know.
Thanks for your reply.
Regards,
Tiwa.

Similar Messages

Time out fail over

On this system:
OS: Solaris 10 11/06 s10s_u3wos_10 SPARC
Cluster version: 3.1u4
A- Normally after how much time resource is moved to the other node if ipmp fails (e.g. gateway is unreacheable) ?
B- What happens if ipmp fails in both server ? packages are kept on their nodes ?
C- Does it exist timeout over 10 minutes in cluster configuration ?

u have 2 options - u could increase the back end time out to a very large value so that server can wait rather than timing out rather than failing over or to do some thing like
<Object name=�default�>
NameTrans fn=map from=/ name=reverse-proxy-/
</Object>
<Object name=�reverse-proxy-/�>
Route fn=set-origin-server server=server1
ObjectType fn=http-client-config timeout=600
</Object>
see - http://docs.sun.com/app/docs/doc/820-4841/gdhrg?a=view
( or simply disable any fail over but have different individual servers distributing load across different application)
split your uri or application so that each application goes to 1 back end server. for example, let us say - u have 2 java applications that u would like jboss to do the job for you, u could do some thing like
now, u could edit your obj.conf or (<vs>-obj.conf) depending on your configuration so that it looks like this
<Object name=�default�>
NameTrans fn=map from=/ name=reverse-proxy-/
</Object>
<Object name=�reverse-proxy-/�>
<If $uri =~ /foo1>
Route fn=set-origin-server server=<ŝerver1>
</If>
<If $uri =~ /foo2>
Route fn=set-origin-server server=<ŝerver2>
</If>
</Object>
btw - i will file a RFE on your behalf for this feature.

OLAP over HTTP resulting in 503 status code and connection time out

Hi,
I set up my OLAP over HTTP with msmdpump.dll and set up the .ini file accordingly. The connections are fine,
however on my site when i make a lot of request to the OLAP, I get a 503 HTTP status code andconnection time
out in th event log.
I have change the #of threads on the .ini file for
msmdpump.dll. Also changed the initialconnectiontimeout in sql ini file from 10 to 15.
In my OLAP instance in sql studio, under datasources I made adjustments from forums but that did not affect.
in all instances i restarted the machine.
NOt sure where to look further and how i can diagnose what the issue is. Looking for any assistance to help me
resolve my issue.

Hi,
we also had some problems after we made some Stresstests on the AS with many connections.
First we raised the Queue Length and the worker processes in the Application Pool.
Worked, but the recommendation was to do this at the last step.
So we changed the following entries in the ini of the Datapump:
<MinThreadPoolSize>60</MinThreadPoolSize>
<MaxThreadPoolSize>200</MaxThreadPoolSize>
<MaxThreadsPerClient>20</MaxThreadsPerClient>
Kr Jürgen

I have had over 5 time out err-3259 trying to update my Ipad 2 on my imac from last night and all this morning. Anyone else having this issue? It is definitely not my internet connection etc. Right in the end at 99% this error message comes out. Help

I have had over 5 time out err-3259 trying to update my Ipad 2 on my imac from last night and all this morning. Anyone else having this issue? It is definitely not my internet connection etc. Right in the end at 99% this error message comes out. Help

Hi, aliahfromauckland.
If you are still experiencing issues when attempting to update your iPad, see the article below.
iTunes Store reporting error - 3259
http://support.apple.com/kb/TS2799
Hope that helps,
Jason H.

Do Airport Express modems wear out over time

I periodically ( a few times a week) lose my connection with the Internet through Comcast. I have two Airport Express units n our home that is our wireless network. They are synced together. I will lose connectivity with one or both and have to disconnect from power for about a minute and then plug back in, then all is well until the next failure. Do these units wear out over time? Is there a better Apple product to use in this situation? I am using a Motorola modem in this process.
Thanks,
Mike

The physical law of entropy is stronger than God. Therefor, anything and everythign will break down given a long enough time. However, I think you may be worrying a bit too much here. Your express should generally last long enough.. until you plan to change 802.11n to another better format.
Yes, some go bad time to time, hence why limited warranty is only a year from DoP.
I suspect your issue may be due to interference. I'm curious what band are you using on those expresses.

Is it possible to stop the system time outs on my imac ,i have tried 5 times in the last 24 hrs.each time it will go for maybe 3hrs and then times out.each time i have to start the download all over again,thanks,

is it possible to stop the system time out on my imac? i have tried 5 times in the last 24 hrs.it will run for approx.3hrs,and then times out and i have to start
from the beggining again

What is the url of the file your are downloading?
What web browser are you using?
What type of connection do you have to your isp? phone line, dsl, cable, fios...
Try iCab. It lets you restart a download.
icab.de
Robert

Time out error 1.6 million internal table fields are computed using FMs

Hi , All ...
The Report running fine in server with less 300 record but ...production server which has 1.6 million record it gives error as time-out error and takes hell amount of time.
Please suggest ugently ..
I have tried few things
Internal table having 1.6 lacs ... fields to compute .. i have token in a batch
loop at i_cinfo into s_cinfo from 1 to 100000.
and so on ...also applied all the performace related .. like indexs, work areas , deleting adjacent duplicates , for all entries ..wherever applicable.
Please Suggest .
Report is as below
REPORT ZUSOTCBD_CREDIT_REPORT .
TABLES : KNA1,    " General Data Customer Master
         KNB1,    " Customer Master (Company Code)
         KNC1,    " Customer master (transaction figures)
         KNKK,    " Customer master credit management: Control area data
         T009,    " Fiscal Year Variants P
         T009Y,   " Shortened fiscal years in Asset Accounting P
         T001,    " Co. Codes
         T001CM, " Permitted Credit Control Areas per Company Code
         RF42B,   " Structure to hold credit data.
         RF035,   " Structure to hold credit managment fields
         RF02L,   " Structure to hold credit data.
         TRAS,    " Interval for Days in Arrears P
         T000CM. " Data for DSO calculation.
Types
TYPES:
BEGIN OF type_final,
    string(50) TYPE c,                            " String Value for Title
END OF type_final.
data:wa_final     TYPE type_final.                " Work Area to hold Title Data
DATA:    RASID    TYPE RF035-RASID value 'R03N'. " For Days in interval
DATA:    MONAT(2) TYPE N.
DATA:    GJAHR    TYPE KNC1-GJAHR.
DATA:    LD_PERIODS(32) TYPE N
                       VALUE '01020304050607080910111213141516'.
DATA     sytabix type sy-tabix.
DATA     LAND      TYPE KNA1-LAND1 VALUE 'US'.   " Country Key
DATA:   LD_PERIOD    TYPE BSID-MONAT,            " Fiscal Year Variant
        LD_GJAHR   TYPE KNC1-GJAHR,
        LD_COUNTER TYPE SY-TABIX.
Internal Tables
Internal table to hold Title Data                                   *
DATA:
i_final    TYPE STANDARD TABLE OF type_final.
**Internal Table Permitted Credit Control Areas per Company Code
DATA:    BEGIN OF TCMTAB OCCURS 10.
        INCLUDE STRUCTURE T001CM.
DATA:    END   OF TCMTAB.
*Internal table to store Customer no.
DATA : BEGIN OF ICUST OCCURS 0,
           KUNNR             TYPE KNA1-KUNNR,    " Customer No.
        END   OF ICUST.
DATA:    BEGIN OF BUKTAB OCCURS 20,
           KKBER             LIKE T001-KKBER,    " Credit Control Area
           BUKRS             LIKE T001-BUKRS,    " Co. Code
           WAERS             LIKE T001-WAERS,    " Currency
           PERIV             LIKE T001-PERIV,    " Fiscal Year Variant
           BUTXT             LIKE T001-BUTXT,
         END   OF BUKTAB.
Internal Table to store Fiscal year Data .
DATA:    BEGIN OF GJATAB OCCURS 5,
           PERIV             LIKE T001-PERIV,    " Fiscal Year Variant
           GJAHR             LIKE KNC1-GJAHR,    " Fiscal Year
           MONAT             LIKE T009-ANZBP,    "
           ANZBP             LIKE T009-ANZBP,    " Number of posting periods
         END   OF GJATAB.
*Main Output internal table to be used to store credit history Information
DATA : BEGIN OF I_CINFO occurs 0,
             KUNNR TYPE   KNB1-KUNNR,     " Customer
             KNKLI TYPE   KNKK-KNKLI,     " Customer's account number with credit limit reference
             KKBER TYPE   KNKK-KKBER,     " Credit Control Area
             CTLPC TYPE   KNKK-CTLPC,     " Risk Category
             KLIMK TYPE   KNKK-KLIMK,     " Credit Limit
             SBGRP TYPE   KNKK-SBGRP,     " Credit representative group for credit management
             ERDAT TYPE   KNKK-ERDAT,     " Created On
             DTREV TYPE   KNKK-DTREV,     " Last Internal Review
             REVDB TYPE   KNKK-REVDB,     " Last External Review
             SALDO TYPE   RF42B-SALDO,    " Balance
             DSOIN TYPE   RF02L-DSOIN,    " DSO
             H06SA TYPE   RF035-H06SA,    " Highest Balance at the end of 6 Months
             H06JA TYPE   RF035-H06JA,    " Year highest Balance 6 Months
             H06MO TYPE   RF035-H06MO,    " Month OF hihest Balance 6 Months
             H12SA TYPE   RF035-H12SA,    " Highest Balance at the end of 12 Months
             H12JA TYPE   RF035-H12JA,    " Year highest Balance 12 Months
             H12MO TYPE   RF035-H12MO,    " Month OF hihest Balance 12 Months
             UMP2U TYPE   RF42B-UMP2U,    " Sales from the current Year
             UMP1U TYPE   RF42B-UMP1U,    " Sales from the Previous Year
             SFAEL TYPE   RF035-SFAEL,    " Total Past Due Open Item
             SFAE1 TYPE   RF035-SFAE1,    " Aging buckets 0-15
             SFAE2 TYPE   RF035-SFAE2,    " Aging buckets 16-30
             SFAE3 TYPE   RF035-SFAE3,    " Aging buckets 31-60
             SFAE4 TYPE   RF035-SFAE4,    " Aging buckets 60-90
             SFAE5 TYPE   RF035-SFAE5,    " Aging buckets Over 90
      END Of I_CINFO.
DATA : BEGIN OF S_CINFO ,
             KUNNR TYPE   KNB1-KUNNR,     " Customer
             KNKLI TYPE   KNKK-KNKLI,     " Customer's account number with credit limit reference
             KKBER TYPE   KNKK-KKBER,     " Credit Control Area
             CTLPC TYPE   KNKK-CTLPC,     " Risk Category
             KLIMK TYPE   KNKK-KLIMK,     " Credit Limit
             SBGRP TYPE   KNKK-SBGRP,     " Credit representative group for credit management
             ERDAT TYPE   KNKK-ERDAT,     " Created On
             DTREV TYPE   KNKK-DTREV,     " Last Internal Review
             REVDB TYPE   KNKK-REVDB,     " Last External Review
             SALDO TYPE   RF42B-SALDO,    " Balance
             DSOIN TYPE   RF02L-DSOIN,    " DSO
             H06SA TYPE   RF035-H06SA,    " Highest Balance at the end of 6 Months
             H06JA TYPE   RF035-H06JA,    " Year highest Balance 6 Months
             H06MO TYPE   RF035-H06MO,    " Month OF hihest Balance 6 Months
             H12SA TYPE   RF035-H12SA,    " Highest Balance at the end of 12 Months
             H12JA TYPE   RF035-H12JA,    " Year highest Balance 12 Months
             H12MO TYPE   RF035-H12MO,    " Month OF hihest Balance 12 Months
             UMP2U TYPE   RF42B-UMP2U,    " Sales from the current Year
             UMP1U TYPE   RF42B-UMP1U,    " Sales from the Previous Year
             SFAEL TYPE   RF035-SFAEL,    " Total Past Due Open Item
             SFAE1 TYPE   RF035-SFAE1,    " Aging buckets 0-15
             SFAE2 TYPE   RF035-SFAE2,    " Aging buckets 16-30
             SFAE3 TYPE   RF035-SFAE3,    " Aging buckets 31-60
             SFAE4 TYPE   RF035-SFAE4,    " Aging buckets 60-90
             SFAE5 TYPE   RF035-SFAE5,    " Aging buckets Over 90
      END Of s_cinfo.
*Internal table to hold month-wise balance.
DATA:    BEGIN OF SALTAB OCCURS 12,
           LNUMM(2)     TYPE N,             " Month
           SALDO        LIKE RF42B-SALDO,   " Balance
         END   OF SALTAB.
*Internal table used for computing the Balance fields
DATA:    BEGIN OF SALDO,
           UML01             LIKE KNC1-UM01S,
           UML02             LIKE KNC1-UM01S,
           UML03             LIKE KNC1-UM01S,
           UML04             LIKE KNC1-UM01S,
           UML05             LIKE KNC1-UM01S,
           UML06             LIKE KNC1-UM01S,
           UML07             LIKE KNC1-UM01S,
           UML08             LIKE KNC1-UM01S,
           UML09             LIKE KNC1-UM01S,
           UML10             LIKE KNC1-UM01S,
           UML11             LIKE KNC1-UM01S,
           UML12             LIKE KNC1-UM01S,
         END   OF SALDO.
Structure to hold Bal fields ------ -------
DATA:    BEGIN OF SKNKK,
           KUNNR             LIKE KNA1-KUNNR, " Customer Number 1: Debitor
           KONTO             LIKE KNKK-KUNNR,
           SFAE1             LIKE RF035-SFAE1, " Aging buckets 0-15
           SFAE2             LIKE RF035-SFAE2, " Aging buckets 16-30
           SFAE3             LIKE RF035-SFAE3, " Aging buckets 30-60
           SFAE4             LIKE RF035-SFAE4, " Aging buckets 60-90
           SFAE5             LIKE RF035-SFAE5, " Aging buckets Over 90
           SFAEL             LIKE RF035-SFAEL, " Total Due of Items
           UML01             LIKE KNC1-UM01S,
           UML02             LIKE KNC1-UM01S,
           UML03             LIKE KNC1-UM01S,
           UML04             LIKE KNC1-UM01S,
           UML05             LIKE KNC1-UM01S,
           UML06             LIKE KNC1-UM01S,
           UML07             LIKE KNC1-UM01S,
           UML08             LIKE KNC1-UM01S,
           UML09             LIKE KNC1-UM01S,
           UML10             LIKE KNC1-UM01S,
           UML11             LIKE KNC1-UM01S,
           UML12             LIKE KNC1-UM01S,
           UMP1U             LIKE RF42B-UMP1U, " Sales from the Previous Year
           UMP2U             LIKE RF42B-UMP2U, " Sales from the current Year
           SALDO             LIKE RF42B-SALDO, " Balance
         END   OF SKNKK.
DATA : BEGIN OF ICUST1 OCCURS 0,
           KUNNR             TYPE KNA1-KUNNR,    "For Customer Filter.
        END   OF ICUST1.
**Internal table to hold fiscal varriants
DATA: BEGIN OF LT_PERIODS OCCURS 12,
         PERIOD LIKE BSID-MONAT,
         GJAHR LIKE KNC1-GJAHR,
       END OF LT_PERIODS.
**Constants
constants : BUKRS1 TYPE KNB1-BUKRS VALUE '1000',
             BUKRS2 TYPE KNB1-BUKRS VALUE '1031',
             Recs   Type i value '200',
             B_count type i value '2'.
      INITIALIZATION
INITIALIZATION.
IF RASID IS INITIAL.
    SELECT * FROM TRAS.
      EXIT.
    ENDSELECT.
    IF SY-SUBRC = 0.
      RASID = TRAS-RASID.
    ENDIF.
ENDIF.
SELECTION-SCREEN
parameters : p_path type rlgrap-filename default 'C:\Documents and Settings\C890971\Desktop\Credit_history.XLS'.
Start of selection processing
START-OF-SELECTION.
**Get Customers for Co. Code 1000 & 1031.
PERFORM GET_CUST.
Get / Compute Credit Information data for Company Codes 1000 & 1031.
PERFORM GET_CREDIT_DATA.
End of selection processing
*END-OF-SELECTION.
Listing Credit History Data
PERFORM DOWNLOAD_CREDIT_DATA.
S U B R O U T I N E S
*&      Form GET_CUST
      text
--> p1        text
<-- p2        text
FORM GET_CUST .
Get US only Customers.
Refresh icust.
Select kunnr from kna1 appending table icust
                               where Land1 = land.
**Delete duplicate records
Delete Adjacent duplicates from icust comparing kunnr.
if icust[] is not initial.
   Limit the selection some more to Co. Code 1000 & 1031
As join will cost overhead as compared.
Select kunnr from knb1 into table icust1
                              for all entries in icust
                              where kunnr = icust-kunnr
                              and   bukrs = bukrs1
                              OR    bukrs = bukrs2.
**Delete duplicate records
Delete Adjacent duplicates from icust1 comparing kunnr.
   endif.
**Free memory.
Free icust.
Credit Control Area
select * from T001CM into table TCMTAB
                       where bukrs = bukrs1 OR
                             bukrs = bukrs2.
ENDFORM.                    " GET_CUST
*&      Form GET_CREDIT_DATA
      text
--> p1        text
<-- p2        text
FORM GET_CREDIT_DATA .
DATA : L_TEXT(60) TYPE C ,
         Ltext1(50) type C value 'Computing Credit-History Data For',
         Ltext2(10) type C value 'Customers',
         L_PCT type i value '10',
         L_recs type i,
         l_batch_recs type i,
         l_s_rec type i value 1,
         l_recs1(7) type N.
***Fetch data from KNKK table
PERFORM GET_KNKK_DATA .
***Computing Crredit Fields
**Number of Customers For whom Deatils needed.
Describe table I_CINFO lines l_recs.
l_recs1 = l_recs.
Concatenate Ltext1 l_recs1 Ltext2 into l_text separated by ' '.
PERFORM GET_PGRESS_INDICATOR USING l_text l_pct.
***If records are more than 200000, should be processed batch-wise
If l_recs > recs.
    l_batch_recs = abs( l_recs / b_count ).
    Do b_count times.
      loop at i_cinfo INTO S_CINFO from l_S_REC to l_batch_recs.
**Remember the row
        sytabix = sy-tabix.
**Compute DSO
        PERFORM GET_DSO_FIELD .
Compute rest credit history data.
        PERFORM COMPUTE_SFIELDS.
      endloop.
      l_S_REC = l_S_REC + l_batch_recs.
      l_batch_recs = l_batch_recs + l_batch_recs.
      IF l_batch_recs ge l_recs.
        l_batch_recs = l_recs.
      eNDIF.
Commit up to here to release the DB locks.
      Commit work.
    enddo.
else.
    loop at i_cinfo INTO S_CINFO.
**Remember the row
      sytabix = sy-tabix.
**Compute DSO
      PERFORM GET_DSO_FIELD .
Compute rest credit history data.
      PERFORM COMPUTE_SFIELDS.
    endloop.
Endif.
ENDFORM.                    " GET_CREDIT_DATA
*&      Form GET_KNKK_DATA
      text
     -->P_ICUST_KUNNR text
FORM GET_KNKK_DATA .
if icust1[] is not initial.
SELECT   KUNNR KNKLI KKBER CTLPC KLIMK
           SBGRP ERDAT DTREV REVDB
           from KNKK into corresponding fields of table I_Cinfo
           for all entries in icust1
           where kunnr = icust1-kunnr.
Delete Adjacent duplicates from i_cinfo comparing kunnr.
endif.
**Free Memory for internal table icust1.
Free icust1.
ENDFORM.                    " GET_KNKK_DATA
**&      Form GET_DSO_FIELD
      text
--> p1        text
<-- p2        text
FORM GET_DSO_FIELD .
***Determine DSO Parameter
PERFORM DSO_PARAMETER.
***Compute DSO
CALL FUNCTION 'CUSTOMER_DSO_CALCULATION'
    EXPORTING
      I_KKBER       = s_cinfo-kkber
      I_KUNNR       = s_cinfo-kunnr
      I_ANZBUPER    = T000CM-DSOPP
      I_XCHILDS     = T000CM-DSOCH
      I_ACTBALANCE = T000CM-DSOAB
    IMPORTING
      E_DSOIN       = RF02L-DSOIN
    EXCEPTIONS
      ERROR_MESSAGE = 1.
ENDFORM.                    " GET_DSO_FIELD
*&      Form DSO_PARAMETER
      text
--> p1        text
<-- p2        text
FORM DSO_PARAMETER.
IF T000CM-DSOPP IS INITIAL.
    SELECT SINGLE * FROM T000CM.
    IF SY-SUBRC     EQ 0.
      IF T000CM-DSOPP IS INITIAL.
        T000CM-DSOPP = '003'.
      ENDIF.
    ELSE.
      T000CM-DSOPP = '003'.
      T000CM-DSOCH = ' '.
      T000CM-DSOAB = 'X'.
    ENDIF.
ENDIF.
ENDFORM.                    " DSO_PARAMETER
--> p1        text
<-- p2        text
FORM PERIODE_ERMITTELN_EXC USING
            P03_BUDAT    LIKE SYST-DATUM
            P03_GJAHR    LIKE KNC1-GJAHR
            P03_MONAT    LIKE MONAT.
CALL FUNCTION 'FI_PERIOD_DETERMINE'
       EXPORTING
            I_BUDAT = P03_BUDAT
            I_PERIV = T001-PERIV
          I_BUKRS = T001-BUKRS
            I_GJAHR = P03_GJAHR
            I_MONAT = P03_MONAT
       IMPORTING
            E_GJAHR = P03_GJAHR
            E_MONAT = P03_MONAT
       EXCEPTIONS
            ERROR_MESSAGE = 1.
ENDFORM.                    "PERIODE_ERMITTELN_EXC
*&      Form COMPUTE_SFIELDS
      text
--> p1        text
<-- p2        text
FORM COMPUTE_SFIELDS .
**Compute Balance
PERFORM GET_SFIELDS .
S_CINFO-DSOIN = RF02L-DSOIN.
S_CINFO-SALDO = RF035-SALDO.
S_CINFO-H06SA = RF035-H06SA.
S_CINFO-H06JA = RF035-H06JA.
S_CINFO-H06MO = RF035-H06MO.
S_CINFO-H12SA = RF035-H12SA.
S_CINFO-H12JA = RF035-H12JA.
S_CINFO-H12MO = RF035-H12MO.
S_CINFO-UMP2U = RF42B-UMP2U.
S_CINFO-UMP1U = RF42B-UMP1U.
S_CINFO-SFAEL = RF035-SFAEL.
S_CINFO-SFAE1 = RF035-SFAE1.
S_CINFO-SFAE2 = RF035-SFAE2.
S_CINFO-SFAE3 = RF035-SFAE3.
S_CINFO-SFAE4 = RF035-SFAE4.
S_CINFO-SFAE5 = RF035-SFAE5.
modify..
MODIFY I_CINFO FROM S_CINFO INDEX sytabix.
CLEAR: S_CINFO,RF035,RF02L, RF42B.
ENDFORM.                    " COMPUTE_SFIELDS
      text
     -->P_C_INFO_KUNNR text
FORM GET_CUST_BAL_INFO.
LOOP AT TCMTAB.
    CALL FUNCTION 'FI_COMPANY_CODE_DATA'
      EXPORTING
        I_BUKRS       = TCMTAB-BUKRS
      IMPORTING
        E_T001        = T001
      EXCEPTIONS
        ERROR_MESSAGE = 1.
    IF SY-SUBRC = 0.
      MOVE-CORRESPONDING T001 TO BUKTAB.
      BUKTAB-KKBER = TCMTAB-KKBER.
      COLLECT BUKTAB.
    ENDIF.
ENDLOOP.
LOOP AT BUKTAB WHERE PERIV NE SPACE.
    GJATAB-PERIV = BUKTAB-PERIV.
    COLLECT GJATAB.
ENDLOOP.
CLEAR: MONAT.
LOOP AT GJATAB.
    T001-PERIV = GJATAB-PERIV.
    CLEAR: GJAHR, MONAT.
    PERFORM PERIODE_ERMITTELN_EXC USING SY-DATLO GJAHR MONAT.
    CHECK SY-SUBRC = 0.
    GJATAB-GJAHR = GJAHR.
    GJATAB-MONAT = MONAT.
    SELECT SINGLE * FROM T009 WHERE PERIV = GJATAB-PERIV.
    IF SY-SUBRC = 0.
      GJATAB-ANZBP = T009-ANZBP.
    ENDIF.
    MODIFY GJATAB.
ENDLOOP.
LOOP AT BUKTAB.
    CHECK NOT ( BUKTAB-PERIV IS INITIAL ).
    READ TABLE GJATAB WITH KEY BUKTAB-PERIV.
    CHECK SY-SUBRC = 0
      AND NOT ( GJATAB-GJAHR IS INITIAL ).
    CALL FUNCTION 'CUSTOMER_BALANCE'
      EXPORTING
        KUNNR      = S_cinfo-kunnr
        BUKRS      = BUKTAB-BUKRS
        GJAHR      = GJATAB-GJAHR
        MONAT      = GJATAB-MONAT
        PERIV      = GJATAB-PERIV
        ANZBP      = GJATAB-ANZBP
        XH6MON     = 'X'
        XH12MON    = 'X'
      IMPORTING
        UMP2U      = RF42B-UMP2U
        VMP2U      = RF42B-UMP1U
        SALDO      = RF035-SALDO
        UML01      = SALDO-UML01
        UML02      = SALDO-UML02
        UML03      = SALDO-UML03
        UML04      = SALDO-UML04
        UML05      = SALDO-UML05
        UML06      = SALDO-UML06
        UML07      = SALDO-UML07
        UML08      = SALDO-UML08
        UML09      = SALDO-UML09
        UML10      = SALDO-UML10
        UML11      = SALDO-UML11
        UML12      = SALDO-UML12
      EXCEPTIONS
        NO_BALANCE = 4.
    IF SY-SUBRC = 0.
      SKNKK-UMP1U = SKNKK-UMP1U + RF42B-UMP1U.
      SKNKK-UMP2U = SKNKK-UMP2U + RF42B-UMP2U.
      SKNKK-SALDO = SKNKK-SALDO + RF035-SALDO.
      SKNKK-UML01 = SKNKK-UML01 + SALDO-UML01.
      SKNKK-UML02 = SKNKK-UML02 + SALDO-UML02.
      SKNKK-UML03 = SKNKK-UML03 + SALDO-UML03.
      SKNKK-UML04 = SKNKK-UML04 + SALDO-UML04.
      SKNKK-UML05 = SKNKK-UML05 + SALDO-UML05.
      SKNKK-UML06 = SKNKK-UML06 + SALDO-UML06.
      SKNKK-UML07 = SKNKK-UML07 + SALDO-UML07.
      SKNKK-UML08 = SKNKK-UML08 + SALDO-UML08.
      SKNKK-UML09 = SKNKK-UML09 + SALDO-UML09.
      SKNKK-UML10 = SKNKK-UML10 + SALDO-UML10.
      SKNKK-UML11 = SKNKK-UML11 + SALDO-UML11.
      SKNKK-UML12 = SKNKK-UML12 + SALDO-UML12.
    ENDIF.
ENDLOOP.
ENDFORM.                    "
*&      Form GET_SFIELDS
      text
--> p1        text
<-- p2        text
FORM GET_SFIELDS .
sknkk-kunnr = S_CINFO-KUNNR.
**Clear target to store computed values
CLEAR: RF035.
**Compute Balance fields
PERFORM GET_CUST_BAL_INFO.
REFRESH: SALTAB.
SALTAB-LNUMM = '01'. SALTAB-SALDO = SKNKK-UML01. APPEND SALTAB.
SALTAB-LNUMM = '02'. SALTAB-SALDO = SKNKK-UML02. APPEND SALTAB.
SALTAB-LNUMM = '03'. SALTAB-SALDO = SKNKK-UML03. APPEND SALTAB.
SALTAB-LNUMM = '04'. SALTAB-SALDO = SKNKK-UML04. APPEND SALTAB.
SALTAB-LNUMM = '05'. SALTAB-SALDO = SKNKK-UML05. APPEND SALTAB.
SALTAB-LNUMM = '06'. SALTAB-SALDO = SKNKK-UML06. APPEND SALTAB.
SALTAB-LNUMM = '07'. SALTAB-SALDO = SKNKK-UML07. APPEND SALTAB.
SALTAB-LNUMM = '08'. SALTAB-SALDO = SKNKK-UML08. APPEND SALTAB.
SALTAB-LNUMM = '09'. SALTAB-SALDO = SKNKK-UML09. APPEND SALTAB.
SALTAB-LNUMM = '10'. SALTAB-SALDO = SKNKK-UML10. APPEND SALTAB.
SALTAB-LNUMM = '11'. SALTAB-SALDO = SKNKK-UML11. APPEND SALTAB.
SALTAB-LNUMM = '12'. SALTAB-SALDO = SKNKK-UML12. APPEND SALTAB.
READ TABLE SALTAB INDEX 1.
RF035-H06SA = SALTAB-SALDO.
RF035-H06MO = SALTAB-LNUMM.
RF035-H12SA = SALTAB-SALDO.
RF035-H12MO = SALTAB-LNUMM.
------ SALTAB ---------------------------------------------
LOOP AT SALTAB.
    IF SALTAB-SALDO > RF035-H06SA
    AND SY-TABIX     < 7.
      RF035-H06SA = SALTAB-SALDO.
      RF035-H06MO = SALTAB-LNUMM.
    ENDIF.
    IF SALTAB-SALDO > RF035-H12SA
    AND SY-TABIX     < 13.
      RF035-H12SA = SALTAB-SALDO.
      RF035-H12MO = SALTAB-LNUMM.
    ENDIF.
ENDLOOP.
------ Period--------------------
REFRESH LT_PERIODS.
CLEAR LD_COUNTER.
READ TABLE BUKTAB INDEX 1.
IF SY-SUBRC = 0.
    READ TABLE GJATAB WITH KEY BUKTAB-PERIV.
    DO GJATAB-MONAT TIMES
       VARYING LD_PERIOD FROM LD_PERIODS(2) NEXT LD_PERIODS+2(2)
                                                 RANGE LD_PERIODS.
      LT_PERIODS-GJAHR = GJATAB-GJAHR.
      LT_PERIODS-PERIOD = LD_PERIOD.
      LD_COUNTER = LD_COUNTER + 1.
      APPEND LT_PERIODS.
    ENDDO.
    IF LD_COUNTER LT 12.
      LD_GJAHR = GJATAB-GJAHR - 1.
      CLEAR T009Y.
      SELECT SINGLE * FROM T009Y WHERE PERIV = GJATAB-PERIV
                                   AND GJAHR = LD_GJAHR.
      DO GJATAB-ANZBP TIMES
         VARYING LD_PERIOD FROM LD_PERIODS(2) NEXT LD_PERIODS+2(2)
                                                   RANGE LD_PERIODS.
        IF T009Y-ANZBP > 0.
          CHECK SY-INDEX <= T009Y-ANZBP.
        ENDIF.
        LD_COUNTER = LD_COUNTER + 1.
        LT_PERIODS-GJAHR = LD_GJAHR.
        LT_PERIODS-PERIOD = LD_PERIOD.
        APPEND LT_PERIODS.
      ENDDO.
    ENDIF.
    IF LD_COUNTER LT 12.
      LD_GJAHR = LD_GJAHR - 1.
      DO GJATAB-ANZBP TIMES
         VARYING LD_PERIOD FROM LD_PERIODS(2) NEXT LD_PERIODS+2(2)
                                                   RANGE LD_PERIODS.
        LD_COUNTER = LD_COUNTER + 1.
        LT_PERIODS-GJAHR = LD_GJAHR.
        LT_PERIODS-PERIOD = LD_PERIOD.
        APPEND LT_PERIODS.
      ENDDO.
    ENDIF.
    SORT LT_PERIODS BY GJAHR ASCENDING PERIOD ASCENDING.
    LD_COUNTER = LD_COUNTER - 12.
    DO LD_COUNTER TIMES.
      DELETE LT_PERIODS INDEX 1.
    ENDDO.
    SORT LT_PERIODS BY GJAHR DESCENDING PERIOD DESCENDING.
    READ TABLE LT_PERIODS INDEX RF035-H06MO.
    RF035-H06MO = LT_PERIODS-PERIOD.
    RF035-H06JA = LT_PERIODS-GJAHR.
    READ TABLE LT_PERIODS INDEX RF035-H12MO.
    RF035-H12MO = LT_PERIODS-PERIOD.
    RF035-H12JA = LT_PERIODS-GJAHR.
ENDIF.
**Compute Due Dates fields
PERFORM GET_AGING_BUCKETS .
RF035-SFAE1 = SKNKK-SFAE1.
RF035-SFAE2 = SKNKK-SFAE2.
RF035-SFAE3 = SKNKK-SFAE3.
RF035-SFAE4 = SKNKK-SFAE4 .
RF035-SFAE5 = SKNKK-SFAE5.
ENDLOOP.
ENDFORM.                    " GET_BALANCE_SFIELDS
*&      Form GET_AGING_BUCKETS
      text
--> p1        text
<-- p2        text
FORM GET_AGING_BUCKETS .
DATA: BEGIN OF LT_BUKRS OCCURS 0,
          BUKRS LIKE T001-BUKRS,
        END OF LT_BUKRS.
DATA: BEGIN OF LT_BUKTAB OCCURS 0,
          BUKRS LIKE T001-BUKRS,
          WAERS LIKE T001-WAERS,
          KKBER LIKE T014-KKBER,
        END OF LT_BUKTAB.
DATA: LD_LINES LIKE SY-TABIX.
*...performance optimization: for more than one company codes check....*
*...if balances exist and avoid selection of open items, if they don't.*
*...exist..............................................................*
REFRESH LT_BUKRS.
REFRESH LT_BUKTAB.
DESCRIBE TABLE BUKTAB LINES LD_LINES.
IF LD_LINES GT 1.
    SELECT DISTINCT BUKRS APPENDING CORRESPONDING FIELDS
                                    OF TABLE LT_BUKRS
                          FROM KNC1 FOR ALL ENTRIES IN BUKTAB
                    WHERE BUKRS = BUKTAB-BUKRS AND
                          KUNNR = Sknkk-KUNNR.
    SELECT DISTINCT BUKRS APPENDING CORRESPONDING FIELDS
                                    OF TABLE LT_BUKRS
                          FROM KNC3 FOR ALL ENTRIES IN BUKTAB
                    WHERE BUKRS = BUKTAB-BUKRS AND
                          KUNNR = Sknkk-KUNNR.
    SORT LT_BUKRS.
    DELETE ADJACENT DUPLICATES FROM LT_BUKRS.
    LOOP AT LT_BUKRS.
      LOOP AT BUKTAB WHERE BUKRS = LT_BUKRS-BUKRS.
        MOVE-CORRESPONDING BUKTAB TO LT_BUKTAB.
        APPEND LT_BUKTAB.
      ENDLOOP.
    ENDLOOP.
ELSE.
    READ TABLE BUKTAB INDEX 1.
    MOVE-CORRESPONDING BUKTAB TO LT_BUKTAB.
    APPEND LT_BUKTAB.
ENDIF.
*...process company codes for customer given by interface..........*
LOOP AT LT_BUKTAB WHERE KKBER = s_cinfo-KKBER.
    CALL FUNCTION 'CUSTOMER_DUE_DATE_ANALYSIS'
         EXPORTING BUKRS   = LT_BUKTAB-BUKRS
                   KKBER   = ' '
                    KKBER   = s_cinfo-KKBER
                    KUNNR   = Sknkk-KUNNR
                    RASID   = RASID
         IMPORTING SFAE1   = RF035-SFAE1
                    SFAE2   = RF035-SFAE2
                    SFAE3   = RF035-SFAE3
                    SFAE4   = RF035-SFAE4
                    SFAE5   = RF035-SFAE5
                    SFAEL   = RF035-SFAEL
         EXCEPTIONS NO_OPEN_ITEMS = 4.
    IF SY-SUBRC = 0.
*-- RF035 -
      SKNKK-SFAE1 = SKNKK-SFAE1 + RF035-SFAE1.
      SKNKK-SFAE2 = SKNKK-SFAE2 + RF035-SFAE2.
      SKNKK-SFAE3 = SKNKK-SFAE3 + RF035-SFAE3.
      SKNKK-SFAE4 = SKNKK-SFAE4 + RF035-SFAE4.
      SKNKK-SFAE5 = SKNKK-SFAE5 + RF035-SFAE5.
      SKNKK-SFAE5 = SKNKK-SFAE5 + RF035-SFAE5.
      SKNKK-SFAEL = SKNKK-SFAEL + RF035-SFAEL.
    ENDIF.
ENDLOOP.
ENDFORM.                    " GET_AGING_BUCKETS
*&      Form header
This Subroutine gets data for displaying title                     *
There are no interface parameters to be passed to this subroutine. *
FORM header .
wa_final-string = text-000. APPEND wa_final TO i_final.
wa_final-string = text-001. APPEND wa_final TO i_final.
wa_final-string = text-002. APPEND wa_final TO i_final.
wa_final-string = text-003. APPEND wa_final TO i_final.
wa_final-string = text-004. APPEND wa_final TO i_final.
wa_final-string = text-005. APPEND wa_final TO i_final.
wa_final-string = text-006. APPEND wa_final TO i_final.
wa_final-string = text-007. APPEND wa_final TO i_final.
wa_final-string = text-008. APPEND wa_final TO i_final.
wa_final-string = text-009. APPEND wa_final TO i_final.
wa_final-string = text-010. APPEND wa_final TO i_final.
wa_final-string = text-011. APPEND wa_final TO i_final.
wa_final-string = text-012. APPEND wa_final TO i_final.
wa_final-string = text-013. APPEND wa_final TO i_final.
wa_final-string = text-014. APPEND wa_final TO i_final.
wa_final-string = text-015. APPEND wa_final TO i_final.
wa_final-string = text-016. APPEND wa_final TO i_final.
wa_final-string = text-017. APPEND wa_final TO i_final.
wa_final-string = text-018. APPEND wa_final TO i_final.
wa_final-string = text-019. APPEND wa_final TO i_final.
wa_final-string = text-020. APPEND wa_final TO i_final.
wa_final-string = text-021. APPEND wa_final TO i_final.
wa_final-string = text-022. APPEND wa_final TO i_final.
wa_final-string = text-023. APPEND wa_final TO i_final.
wa_final-string = text-024. APPEND wa_final TO i_final.
ENDFORM.                               " header
*&      Form DOWNLOADCREDITDATA
      text
     -->P_P_PATH text
FORM DOWNLOADCREDITDATA USING P_PATH.
DATA:
      lw_file2 TYPE string .           " File Path
lw_file2 = p_PATH.
CALL FUNCTION 'GUI_DOWNLOAD'
     EXPORTING
BIN_FILESIZE                    = BIN_FILESIZE
       filename                        = lw_file2
       filetype                        = 'DBF'
APPEND                          = ' '
   write_field_separator           = ' '
HEADER                          = '00'
TRUNC_TRAILING_BLANKS           = 'X'
WRITE_LF                        = 'X'
   COL_SELECT                      = 'X'
COL_SELECT_MASK                 = ' '
DAT_MODE                        = 'X'
CONFIRM_OVERWRITE               = ' '
NO_AUTH_CHECK                   = ' '
CODEPAGE                        = ' '
IGNORE_CERR                     = ABAP_TRUE
REPLACEMENT                     = '#'
WRITE_BOM                       = ' '
TRUNC_TRAILING_BLANKS_EOL       = 'X'
WK1_N_FORMAT                    = '0'
WK1_N_SIZE                      = ' '
WK1_T_FORMAT                    = ' '
WK1_T_SIZE                      = ' '
IMPORTING
FILELENGTH                      = FILELENGTH
     TABLES
       data_tab                        = I_CINFO
       fieldnames                      = i_final
     EXCEPTIONS
       file_write_error                = 1
       no_batch                        = 2
       gui_refuse_filetransfer         = 3
       invalid_type                    = 4
       no_authority                    = 5
       unknown_error                   = 6
       header_not_allowed              = 7
       separator_not_allowed           = 8
       filesize_not_allowed            = 9
       header_too_long                 = 10
       dp_error_create                 = 11
       dp_error_send                   = 12
       dp_error_write                  = 13
       unknown_dp_error                = 14
       access_denied                   = 15
       dp_out_of_memory                = 16
       disk_full                       = 17
       dp_timeout                      = 18
       file_not_found                  = 19
       dataprovider_exception          = 20
       control_flush_error             = 21
IF sy-subrc <> 0.
Messege
ENDIF.                               " IF sy-subrc EQ 0
ENDFORM.                    " DOWNLOADCREDITDATA
*&      Form DOWNLOAD_CREDIT_DATA
      text
--> p1        text
<-- p2        text
FORM DOWNLOAD_CREDIT_DATA .
PERFORM HEADER.
PERFORM DOWNLOADCREDITDATA USING P_PATH.
ENDFORM.                    " DOWNLOAD_CREDIT_DATA
*&      Form GET_PGRESS_INDICATOR
      text
     -->P_L_TEXT text
     -->P_L_PCT text
FORM GET_PGRESS_INDICATOR USING    L_TEXT
                                    L_PCT.
CALL FUNCTION 'SAPGUI_PROGRESS_INDICATOR'
    EXPORTING
      PERCENTAGE = l_pct
      TEXT       = l_TEXT.
ENDFORM.                    " GET_PGRESS_INDICATOR

If you are just Downloading to a Flat file then why dont you have logic in place for the program to dump the data read into the file to that point depending on any criteria like accounts or customer then clear the internal table and run it in the back ground.
try to use cursor to read the records from the table which will make it a bit more efficient than plain select stement.

Apple Mail, is there a way to change the default time-out?

This has been puzzling me for some time and I have not found a solution. The problem which I also posted in the Mail forum (though I think that if there is a positive answer it will come through here) is as follows:
I have an email account with on my company's mail server which is actually a Novell Netware server with a POP3 service. When using mail to send mail, I have no problems. When using mail to recieve mail, well, sometimes it gets the mail, and sometimes it does not. Usually, I can recieve mail for two or three weeks then it just stops working. No changes to my system, no updates or anything, I recieve email at one point in the day and then 15 minutes later - nothing. In the Activity Monitor, I see "Connecting to ..." then "Sending Password" then "Checking for Messages", then (after a while) it beeps as if it did not find any messages to download (no error!).
Some weeks later, after suffering with webmail, suddenly, it works again. This usually coincides with maintenance on the server, but not always. It also seems to correspond with a general improvement of the server performance. But eventually, the cycle starts over again with mail suddenly not able to find any new messages for that account.
I use dial-up at home, ethernet LAN at work, and DSL at our satellite offices. When it works on one it works on all. Also note that my other email accounts (not in any way connected to my company) work as they should at all times and in each setting.
Is it possible that mail simply times out before the messages are discovered. The Novell server used for mail is by no means known for its performance. If so, is there anyway to change the default timeout in mail for "Checking for Messages"?
Things I have tried:
I have dumped the "MessageUidsAlreadyDownloaded" and "MessageUidsAlreadyDownloaded2" files to no avail.
I have changed computers (I recently upgraded from a ti400), reinstalled the OS, upgraded from 10.2.8 to 10.3.x to 10.4.3, and removed and recreated the mail account (multiple times), all to no avail.
Based on the above observations, I feel that it may be that "Mail's" "Get-mail" function is timing out before new messages are discovered on a very slow server. Is there any way to change the default time-out to evaluate this hypothesis?
Any help would be appreciated.
Kraig

I already thought of that one. I deleted my account from there. But it didn't default to the other one. It just told me I needed to add an account. Thanks tho

JDBC connection to Oracle 10g RAC periodically times out

I've been banging my head against the wall for months now and can't figure out why this is and what's causing it.
We have 6x CF8 servers in our environment. 3 of which work perfectly and the other 3 have the following problem. All 6 machines were installed at the same time and followed the exact same installation plan.
When I configure Oracle RAC data source, some of the machines time-out connecting to Oracle from time-to-time.
Config:
Solaris 9 on both CF and Oracle
CF8 Enterprise with the latest updater.
Apache 2 (not that it's relevant)
6 machines, load-balanced (not clustered), identical install and configuration.
data source config:
JDBC URL: jdbc:macromedia:oracle://10.0.0.3:1521;serviceName=dbname.ourdomain.com;AlternateServers= (10.0.0.4:1521);LoadBalancing=true
DRIVER CLASS: macromedia.jdbc.MacromediaDriver
The problem:
Every few minutes, CF starts hanging requests that deal with a specific RAC only data source. After about 30 seconds, all requests bail and generate this error in cfserver.log:
A non-SQL error occurred while requesting a connection from dbsource.
Timed out trying to establish connection
This happens with any RAC data source on the "bad" servers while the "good" servers don't have this problem. The "bad" server doesn't have any problems with direct (non-rac) Oracle data source.
Already tried:
Moving server connections around on a switch (rulling out bad switch port)
Copying driver from the healthy server (but it's the same installer anyway)
Changed from RAC to normal Oracle type data source - works perfectly. So at the moment I have 3 servers connecting to a specific oracle instance and the other 3 connecting to RAC.
Tried googling and searching forums and even Oracle metalink - nothing I could see relevant to this.
It's a shame that after spending a ton of money on CF8 upgrades and Oracle RAC, we can't really utilize fail-over on the database connection.
Any takers?
Thanks,
Henry

I have the following in my CLASSPATH:
C:\Ora10g1\product\10.2.0\db_1\jdbc\lib\jdbc.jar;
C:\Ora10g1\product\10.2.0\db_1\jdbc\lib\ojdbc14.jar;
C:\Ora10g1\product\10.2.0\db_1\jlib\jndi.jar;
C:\Ora10g1\product\10.2.0\db_1\jlib\orai18n.jar;
Still 'Cannot find type 'oracle.jdbc.pool.OracleDataSource'
Thanks

10.8.2 update times out, cannot install

I have tried it from the app store as well as through the website. When downloading form my browser, the download freezes at a certain number every time. In the app store I get a time out error (error 102)
I have tried restarting and repairing disk/disk permissions
Anyone have a solution?

same thing here. i live in africa and do not have the best of broadband but why cannt Apple create a decent resume doanloadmanager. it seems it starts all over again each time i get the error and have to restart
shame on you Apple !
if the update manager would continue where it stopped no issues there
but alas it doesnt seem to work like that

Just bought a second hand iPod Touch 32GB 4th Gen. The IOS is currently 4.3.5 and when I try to update to the latest, the connection continually times out. Can you help?

Hi All,
First ever post on here but I feel that my options are slowly running out. I've just bought a second hand iPod Touch 32GB 4th Gen. It was reset to factory settings meaning that that software was 4.3.5
As soon as I plug it into iTunes it asks me to update to the latest version. I click for it to go ahead but the connection times out (error code 3259)
I've been on the phone to apple for over an hour and we still couldn't resolve the issue. We tried disabling the firewall, uninstalling AVG, diabling pop up blockers, checking the LAN settings, disabling the router security and anything else we could think of.
We still couldn't get it to stop timing out. I tried to download the firmware from iClarified but iTunes said it didn't recognise the software.
Has anyone got any ideas?

You said:
We still couldn't get it to stop timing out. I tried to download the firmware from iClarified but iTunes said it didn't recognise the software.
Just what did yo do to gt iTunes to see the download:

Time Machine over AirPort to Time Capsule... maybe a solution

Like a lot of people on this forum, apparently, I have been suffering from the inability to make reliable Time Machine backups to a Time Capsule over AirPort. Here's what I did to solve the situation.
Here's my network setup:
I have an ADSL wireless box with b/g network connected over ethernet to a 1-TB Time Capsule which has a 5 GHz 'n' network. Using 5 GHz 'n' network where I am means no interference. All equipment that is not capable of 'n' is on the wireless box, 'n' equipment (basically, only my MacBook Pro) gets on the Time Capsule. It doesn't make internet faster, but sure makes the Time Capsule accessible. Both networks are hidden and secured with WEP (b/g) or WPA2 (n).
(the Time Capsule is double-NATted, unfortunately, to cut down on network chatter in the system log)
After upgrading to 10.5.6, I think I haven't been able to make a reliable Time Machine backup over AirPort. It may have been well before that (possibly with the AirPort Extreme update) but I don't remember. Most of the time, before the wireless box arrived, I have been making far-too-irregular backups over ethernet to the Time Capsule.
Anyway, I had been trying to get Time Machine to work over AirPort to the backup on the Time Capsule. I had made the original backup over ethernet (all 500 GB worth over a weekend). For the incremental backups, though, I would prefer AirPort because keeping a cable attached really is a pain. Of course, it didn't work right away.
What I couldn't figure out was why. Time Machine mounted the sparsebundle volume on the Time Capsule, but after that it seemed to do nothing with it. I left it for half a day and found little by way of relevant network activity. I tried the following to no avail:
* disabled Little Snitch (outgoing firewall) and the OS X firewall (incoming firewall)
* disabled security on the network
* disabled and re-enable Time Machine
* changed the name of the sparsebundle volume (that was dumb!)
* trash Time Machine preferences and re-select the backup disk
* reboot, reboot, reboot
Whatever I did, it sucked. Connecting over ethernet was excellent, and incremental backups went really quick, but AirPort just didn't fly. It would have been worse if it were slow; chances are then it'd be a hardware problem. But nothing was going over AirPort with Time Machine.
In amongst the surfing, I found somewhere how to downgrade the firmware on the Time Capsule. Worth a try since nothing was working. I opened up the AirPort Utility and checked, but it would only give me 7.3.2 (AirPort Utility 5.3.2). I searched and found the AirPort 5.3.1 software, and using Pacifist extracted the AirPort Utility application. That would let me 'downgrade' the Time Capsule firmware to 7.3.1 (and 7.3). It downloaded the 7.3.1 for me and put it on the Time Capsule without problems.
I then made a test run with Time Machine over ethernet, that was fine. The I tried over AirPort - and hey presto! it worked! I re-enabled my network setup (firewalls, security) and it's still working fine.
So, if your Time Capsule is on 7.3.2 firmware and Time Machine over AirPort *****, try downgrading to 7.3.1. The AirPort 5.3.1 software, which can download and install the 7.3.1 software (5.3.2 doesn't) can be found here:
http://support.apple.com/downloads/TimeCapsule_and_AirPort_Base_Station__802_11n__Firmware_7_31
Note: you need Pacifist to extract the AirPort Utility application;
do not install the software over your existing AirPort software

This may be tough because TM isn't supported over wi-fi unless you're using a Time Capsule. There are a couple of resources available to you and I'd also recommend posting in the Snow Leopard forum because TM is part of OS X the OS X forum would be the right venue. The first thing is I'm guessing you are using a router, if so make sure the firmware on it is up-to-date. You will need to refer to the router's manual. You also should do the same with the modem too. Some written resources are:
Time Machine FAQs
Time Machine Troubleshooting
Pondini Time Machine Tips
That's about all I can help you out with.
Good luck!

Itunes update to firmware fails, because connection times out.

I have been unsuccessfully attempting to update my iphone 3gs and ipad to iOS 5 for over a month now. I have spent many, many hours on this, and many phone calls to apple support. I disable Norton 360, and windows firewall, and my firewall on my router. I've tried updating my router's firmware, which bricked the router--thanks apple for insisting this was the problem, and I have replaced the router, with a new one. Itunes diagnostics gives me the following information. I am using itunes as the administrator in Windows 7, 64 bit, although itunes doesn't recognize it, unless I reinstall it as the administrator, but then once I restart the computer, itunes no longer recognizes that I using Windows as an admin.
Also, the firmware cannot update, because the connection times out, despite all my firewalls, and antivirus being turned off.
I've tried downloading iOS 5 and then updating using restore, but that didn't work. I've poured through support forums, and error codes: I get 1611, etc. Cannot seem to resolve this.
Any ideas?
Microsoft Windows 7 x64 Ultimate Edition Service Pack 1 (Build 7601)
System manufacturer System Product Name
iTunes 10.5.0.142
QuickTime not available
FairPlay 1.13.35
Apple Application Support 2.1.5
iPod Updater Library 10.0d2
CD Driver 2.2.2.0
CD Driver DLL 2.1.1.1
Apple Mobile Device 4.0.0.96
Apple Mobile Device Driver 1.57.0.0
Bonjour 3.0.0.10 (333.10)
Gracenote SDK 1.9.3.494
Gracenote MusicID 1.9.3.106
Gracenote Submit 1.9.3.136
Gracenote DSP 1.9.3.44
iTunes Serial Number 0040A7BC031F98E0
Current user is not an administrator.
The current local date and time is 2011-11-15 11:35:00.
iTunes is not running in safe mode.
WebKit accelerated compositing is enabled.
HDCP is supported.
Core Media is supported.
Video Display Information
ATI Technologies Inc., ATI Radeon HD 4800 Series
**** External Plug-ins Information ****
No external plug-ins installed.
The drive F: HL-DT-ST DVDRAM GP08LU30 Rev 1.00 is a USB 1 device.
iPodService 10.5.0.142 (x64) is currently running.
iTunesHelper 10.5.0.142 is currently running.
Apple Mobile Device service 3.3.0.0 is currently running.
**** Network Connectivity Tests ****
Network Adapter Information
Adapter Name:          {01DC2EA3-0DD0-4A51-80A6-7B414E4C6291}
Description:          Realtek PCIe GBE Family Controller
IP Address:          192.168.2.2
Subnet Mask:          255.255.255.0
Default Gateway:          192.168.2.1
DHCP Enabled:          Yes
DHCP Server:          192.168.2.1
Lease Obtained:          Tue Nov 15 11:32:39 2011
Lease Expires:          Tue Nov 15 11:32:38 2011
DNS Servers:          192.168.2.1
Active Connection:          LAN Connection
Connected:          Yes
Online:                    Yes
Using Modem:          No
Using LAN:          Yes
Using Proxy:          No
SSL 3.0 Support:          Enabled
TLS 1.0 Support:          Enabled
Firewall Information
Windows Firewall is on.
iTunes is enabled in Windows Firewall.
Connection attempt to Apple web site was successful.
Connection attempt to browsing iTunes Store was successful.
Connection attempt to purchasing from iTunes Store was successful.
Connection attempt to iPhone activation server was successful.
Connection attempt to firmware update server was unsuccessful.
The network connection timed out.
Connection attempt to Gracenote server was successful.
Last successful iTunes Store access was 2011-11-15 11:33:52.

Disable your firewall/security software and try again.

I have downloaded mozilla firefox a number of times. Over a few days it tells me that the firefox is no longer on my computer. I never delete it. Please help. I do use CCLEANER.

I have downloaded mozilla firefox a number of times. Over a few days it tells me that the firefox is no longer on my computer. I never delete it. Please help. I do use CCLEANER. edit

You are unfortunately out of luck with an Intel Mac and OS X 10.4.11<br />
Best would be to update to OS X 10.5 or later if you want to use Firefox 4 and later versions (current is 8.0).<br />
There is a Firefox 8 compatible third-party version TenFourFox from www.floodgap.com for a PowerPC Mac, but no alternative for an Intel Mac with Mac OS X 10.4.
Firefox 4 and later require at least OS X 10.5 and an Intel Mac.
* http://www.mozilla.com/firefox/8.0/system-requirements/
Firefox 3.6.x (Mac OS X 10.4 and later) can be found here:
* http://www.mozilla.com/en-US/firefox/all-older.html

Time-out issue Always on SQL 2012 Cluster

Currently I'm working on a large deployment of a SharePoint 2013 environment (stretched farm over 2 DC's). We are using a SQL 2012 alwayson multisubnet cluster (each DC has 1 SQL node). During the installation of SharePoint we encountered several connection
time-out errors from the SQL environment. (Exception calling "Open" with "0" argument(s): "Connection Timeout Expired. The timeout period elapsed during the post-login
phase. The connection could have timed out while waiting for server to complete the login process and respond;)
Steps we follow for SharePoint installation are:
Steps to configure SharePoint 2013 on an AlwaysOn Availability group:
1>Create SharePoint databases (with the PowerShell script)
Configure a SQL alias for a consistent SQL instance name.
Create farm on SQL instance/replica 1 (one of the SQL nodes), creating all databases needed (service-apps & web-apps). -->
we are connected directly to 1 SQL node and not connecting to the cluster. Installation server is in same DC as the SQL node.
Stop SharePoint so databases remain static during migration to an AlwaysOn cluster.
2>Move database to AlwaysOn high-availability group.
Restore all the DBs onto SQL replica 2 (with NORECOVERY).
Create AlwaysOn availability group, or use existing
Join the replica 2 databases to availability group.
Create listener.
3>Migrate SharePoint onto AlwaysOn on cluster
Make all SharePoint DB MultiSubnetFailover aware with PowerShell Cmdlet
Reconfigure SQL alias for new listener
àat this point the SharePoint farm is connecting to the SQL cluster (listener of AlwaysOn availability group of the SQL Instance), but we never reached this point so far.
Restart SharePoint services with updated alias.
Event errors and SQL log errors that I found:
Date,Source,Severity,Message,Category,Event,User,Computer
09/18/2014 07:34:59,Microsoft-Windows-FailoverClustering,Error,Cluster network name resource 'SPAG_CU8000001105' failed registration of one or more associated DNS name(s) for the following reason:<nl/>DNS bad key.<nl/>.<nl/><nl/>Ensure
that the network adapters associated with dependent IP address resources are configured with at least one accessible DNS server.,(19),1196,NT AUTHORITY\SYSTEM,CU8000000015
09/18/2014 07:34:59,MSSQL$SPAG,Information,The Service Broker endpoint is in disabled or stopped state.,(2),9666,,CU8000000015
09/18/2014 07:34:52,Microsoft-Windows-FailoverClustering,Error,Cluster network name resource 'SPWMAG_CU8000002105' failed registration of one or more associated DNS name(s) for the following reason:<nl/>DNS bad key.<nl/>.<nl/><nl/>Ensure
that the network adapters associated with dependent IP address resources are configured with at least one accessible DNS server.,(19),1196,NT AUTHORITY\SYSTEM,CU8000000015
09/18/2014 07:34:52,MSSQL$SPWMAG,Information,The Service Broker endpoint is in disabled or stopped state.,(2),9666,,CU8000000015
09/18/2014 07:34:47,Service Control Manager,Information,The WMI Performance Adapter service entered the running state.,(0),7036,,CU8000000015
09/18/2014 07:32:41,Microsoft-Windows-FailoverClustering,Error,Cluster network name resource 'SPSDAG_CU8000003105' failed registration of one or more associated DNS name(s) for the following reason:<nl/>DNS bad key.<nl/>.<nl/><nl/>Ensure
that the network adapters associated with dependent IP address resources are configured with at least one accessible DNS server.,(19),1196,NT AUTHORITY\SYSTEM,CU8000000015
09/18/2014 07:32:41,MSSQL$SPSDAG,Information,The Service Broker endpoint is in disabled or stopped state.,(2),9666,,CU8000000015
09/18/2014 07:31:09,PowerShell,Information,Engine state is changed from Available to Stopped. <nl/><nl/>Details: <nl/> NewEngineState=Stopped<nl/> PreviousEngineState=Available<nl/><nl/> SequenceNumber=61464<nl/><nl/> HostName=OpsMgr
PowerShell Host<nl/> HostVersion=7.0.5000.0<nl/> HostId=32012185-8d9a-41c2-be56-91929c02f1e8<nl/> EngineVersion=4.0<nl/> RunspaceId=af176e01-185d-4574-ab9b-0fd745178d29<nl/> PipelineId=<nl/> CommandName=<nl/> CommandType=<nl/> ScriptName=<nl/> CommandPath=<nl/> CommandLine=,(4),403,,CU8000000015
We are not allow to update/write in the DNS for the multisubnet cluster IP registration, so I think that explains the "failed registration
" error. But can this explains our time-out errors during the SharePoint installation? For the installation we are connection directly to 1 SQL node and not to the SQL
cluster.
Any help is appreciated!
Ronald Bruinsma - Independent SharePoint Consultant - iDocs.info - The Netherlands -- Please don't forget to propose this post as an answer or mark it as helpful if it did help you. Thanks.

Don't just change the connection timeout on your SharePoint farm. This will just hide the real issue. From your error message, it seems that the DNS record for the Availability Group listener name is not being written. Talk to your AD administrators to validate
if dynamic DNS registration is configured for the DNS servers. If it is, AD will create the DNS entry of the virtual computer object for the Availability Group listener name. The WSFC should also have Create Computer Objects permission in the AD Organizational
Unit where your Availability Group listener name will be created.
On a side note, make sure that you configure a separate SharePoint 2013 farm for your DR environment that will use the content databases joined in the Availability Group. For a stretched farm deployments, latency should be less than 1ms one way as
per this article. And while you can add your admin content and config databases on the Availability Group, asynchronous commit is
not supported.
Edwin Sarmiento SQL Server MVP | Microsoft Certified Master
Blog |
Twitter | LinkedIn
SQL Server High Availability and Disaster Recover Deep Dive Course

Time out (over 600sec)

Similar Messages

Maybe you are looking for