Time to connect to RAC database

Hi,
I have installed 11gr2 RAC database on windows server 2008 on ASM. I can connect to existing prod db withing a second but it is taking almost 20Seconds for me to connect to the RAC database. Is it because of the SCAN IPs?
Can anyone let me know the reason behind it and the resolution on it?
Thanks...
Edited by: user2995637 on Jul 22, 2011 6:15 AM
Edited by: user2995637 on Jul 22, 2011 6:16 AM

user2995637 wrote:
I have installed 11gr2 RAC database on windows server 2008 on ASM. I can connect to existing prod db withing a second but it is taking almost 20Seconds for me to connect to the RAC database. Is it because of the SCAN IPs?No. Should not be the case, normally.
Yes, some TNS connections can be slower than others. There are a number of factors. The initial connection may result in a redirect to another listener on a different IP address (e.g. load balancing). This will be slower than a direct connection (no redirect).
In such a case for example, where a redirect occurs, the client with receive a redirect to a new hostname. It needs to resolve that to an IP. This can be slow due to DNS issues (either with the DNS itself, or with the resolution scope config of the client).
The connection can request a dedicated sever instead of a shared server. A shared server connection is simply a hand-off of that client to an existing dispatcher process. A dedicated server connection requires the Listener to launch a brand new Oracle server process, for that process to attach itself to the SGA, and then resume the connection/conversation with the client. Thus shared server is by its nature a lot faster to establish a connection with than a dedicated server.
So there are a number of moving parts that can be slow. And you will need to isolate these and test each in turn to determine where the performance knock is.

Similar Messages

Not able to connect to RAC Database with VIP entries

Hi All,
My RAC database run with Physical Host entries in listener and tnsnames files.
But VIP services are running in both nodes.
Now i want to use VIP enties to connect to the RAC database from client side.
I have modified the both the listener and tnsnames files with VIP entries and bounced the instance.But It didn't work.
Please suggest what could be done in this issues.

Hi,
It is 10.2.0.3 and remote_listener is set to LISTENER_Hostname and Remote listener is configured.
Thanks

ODI Connection for RAC database

Hi,
I am trying to create master repository in ODI. We have RAC database and I want to give scan ip for making connection in URL field.
I started repcreate.sh script to open "Master Repository Creation Wizard" and in URL text field I tried to connect by giving single instance detail and its connecting fine.
But when I tried to give scan ip its throwing error message:
java.sql.SQLException: Listener refused the connection with the following error:
ORA-12505, TNS:listener does not currently know of SID given in connect descriptor
The Connection descriptor used by the client was:
dw01-scan.viva.com.kw:1521:exadev
at oracle.jdbc.driver.DatabaseError.throwSqlException(DatabaseError.java:125)
at oracle.jdbc.driver.DatabaseError.throwSqlException(DatabaseError.java:280)
at oracle.jdbc.driver.T4CConnection.logon(T4CConnection.java:328)
at oracle.jdbc.driver.PhysicalConnection.<init>(PhysicalConnection.java:361)
at oracle.jdbc.driver.T4CConnection.<init>(T4CConnection.java:151)
at oracle.jdbc.driver.T4CDriverExtension.getConnection(T4CDriverExtension.java:32)
at oracle.jdbc.driver.OracleDriver.connect(OracleDriver.java:595)
at com.sunopsis.sql.SnpsConnection.u(SnpsConnection.java......
Below is the detail given in Url field:
jdbc:oracle:thin:@scan_ip:port_number:sid
Please assit if you have solution.
Thanks
Saurabh

Had the same thing before (in a Hurry) so I created it against one of the Rac Nodes, then edited my Topology connections (Data servers , Work Repos connections, User login profiles) to use the RAC connection and it was fine.
It might be something to do with the RCU not liking RAC conns.
Hope this helps,
Alastair

"The Network Adapter could not establish the connection" on RAC databases

I am posting what solved our situation here, in case it helps others:
We have RAC databases that use SCAN, but also use their Local_Listener ports (because we could not go completely to SCAN due to our applications).
For some reason, 11.1 Grid Control could see instances if we added them separately, but if we tried to connect to the database & view the performance, it would error out with "The Network Adapter could not establish the connection".
We had to fix it by manually setting the connect string in every instance and database in the OEM Setup to the non-SCAN VIP/Ports.
Hopefully this saves someone else hours & hours of troubleshooting. (I know, the day after Grid Control 12 comes out. SOOO helpful. :P )

Aravind K R wrote:
java.sql.SQLException: The Network Adapter could not establish the connectionWhere is the Oracle error? I hate this - s/w like Java suppressing the underlying error codes and messages. Just how the hell can one diagnose an error when not knowing exactly what it is? There should be a TNS error code and message.
From the info you've given, one can only guess. And the following guess is as good as any. Load balancing is requested. Likely your RAC db services are registered on both static and virtual IPs - as the listeners are running listener 1521/tcp end points on both.
This means the client can get a redirect to connect to a specific listener on a specific IP - and this includes the static IPs. The listener usually passes hostnames (as that is what is configured). If the client cannot resolve that static hostname to an IP, it cannot correct.
So make sure that the client can resolve both virtual and static hostnames of the RAC - not just the virtual ones.
If you're client is Windows, update the c:\windows\system32\drivers\etc\hosts file - alternatively register the hostnames with the local DNS.

One database user taking more time to connect

Hi All,
I have a question,
I have a database say 500GB and I have around 50 schemas in this database.But there is one User that takes more than normal time to connect to the database.
What can be the reason for this and what should be my apprach to look for the problem where it could possibly be.
Regards,
Sphinx

yes, check for online trigger if none there put your own on logon trigger on a normal user and your issue user. do a 10046, examine the trace files, everything the user is doing will be in it.
CREATE OR REPLACE TRIGGER SYS.set_trace
AFTER LOGON ON DATABASE
WHEN (USER in 'GOODUSER','BADUSER')
DECLARE
lcommand varchar(200);
BEGIN
EXECUTE IMMEDIATE 'alter session set statistics_level=ALL';
EXECUTE IMMEDIATE 'alter session set max_dump_file_size=UNLIMITED';
EXECUTE IMMEDIATE 'alter session set events ''10046 trace name context forever, level 12''';
END set_trace;
/tkprof the trace files, whats the difference between good and bad.
moneys on a trigger though.

Configured TNS in oracle client to RAC database

Hi Experts,
I have a 4 nodes oracle RAC in radhat 5.0
both oracle database and client as 10.2.0.4.
I created a TNS that works in our office but it does not work in our remote brance office.
Based on experts instruction, I set up sqlnet trace at client side. but not any file that be gererated.
In linux RAC database, I saw listener.log file as
28-AUG-2009 11:00:01 * (CONNECT_DATA=(SERVER=DEDICATED)(SERVICE_NAME=sale)(INSTANCE_NAME=sale1)(CID=(PR OGRAM=D:\oracle\product\10.2.0\client_1\BIN\sqlplusw.exe)(HOST=TRAC3)(USER=JIM))) * (ADDRESS=(PROTOCOL=tcp)( HOST=xxx.18.10.xx)(PORT=3289)) * establish * sale * 0
in client pc sqlnet.ora my setting as
SQLNET.AUTHENTICATION_SERVICES= (NTS)
TRACE_LEVEL_CLIENT = 16
TRACE_FILE_CLIENT = client
TRACE_DIRECTORY_CLIENT = C:\TEMPODBC
TRACE_TIMESTAMP_CLIENT = ON
SQLNET.EXPIRE_TIME =10
SQLNET.INBOUND_CONNECT_TIMEOUT = 500
SQLNET.SEND_TIMEOUT = 500
SQLNET.RECV_TIMEOUT = 500
I got a error as
ERROR:
ORA-03135: connection lost contact
which wrong is in my case?
I can connect to all other window database from thsi PC.But I can not connect to RAC database from this PC.
However, I can ping RAC node's IP and VIP from this PC
I also can connect to RAC database with TNS from other window PC.
What do I need to do?
ThanKs for any help.
JIM

Hi Sb92075,
Thanks for your help.
I got same error after comment #SQLNET.AUTHENTICATION_SERVICES= (NTS) in client sqlnet.ora in client.
the server side does not have sqlnet file in linux platform.
I also check listener services that all instance status is ready.
I just saw sqlnet.log file in server side that error as
Fatal NI connect error 12170.
VERSION INFORMATION:
TNS for Linux: Version 10.2.0.4.0 - Production
Oracle Bequeath NT Protocol Adapter for Linux: Version 10.2.0.4.0 - Production
TCP/IP NT Protocol Adapter for Linux: Version 10.2.0.4.0 - Production
Time: 28-AUG-2009 13:21:06
Tracing not turned on.
Tns error struct:
ns main err code: 12535
TNS-12535: TNS:operation timed out
ns secondary err code: 12606
nt main err code: 0
nt secondary err code: 0
nt OS err code: 0
Client address: (ADDRESS=(PROTOCOL=tcp)(HOST=xxx.18.xx.xx)(PORT=3513))
what do i need to do?
Thanks
JiM
Edited by: user589812 on Aug 28, 2009 10:22 AM

Multiple RAC databases on same GI using different subnets for Public i/face

Hello. We are configuring a 2 node cluster. That cluster will host several RAC databases. For security reasons our networking team want to create separate subnets for the application traffic to each specific RAC database on the cluster.
E.g. application 1 has 2 application servers that will connect to RAC database PROD1 via one subnet, application 2 has 3 application servers that will connect to RAC database PROD2 via a different subnet, etc.
In addition the networking team want to configure a separate management subnet that DBAs etc. will use to administer all RAC databases and infrastructure in the cluster.
Grid Infrastructure version 11.2.0.2. Database versions will vary from 10.2.0.x to 11.2.0.2. All databases will utilise RAC.
We want to take advantage of SCAN listener functionality to support connectivity to all databases on the cluster. Forum thread 2199620 [https://cn.forums.oracle.com/forums/thread.jspa?threadID=2199620] suggests that 11gR2 supports multiple subnets, which looks to be exactly the feature we need. Please can you confirm how this works and point us to any documentation (standard docs, white papers, MOS, etc.) that might help us configure this.
Document referenced in thread 2199620 was not exactly what we were looking for, and didn't translate too well in Google Translate.
Any guidance much appreciated. Thanks, Rich.
Similar threads:
https://cn.forums.oracle.com/forums/thread.jspa?messageID=9846298? (Dual SCAN on multi homed cluster)
https://cn.forums.oracle.com/forums/thread.jspa?threadID=2199620 (scan listener in OAM VLAN)
Edited by: 887449 on 26-Sep-2011 01:41

Thanks Levi. Your advice is very much appreciated.
Your statement that we can only have one SCAN listener listening on one public network is actually the clarification I was looking for.
For anyone else reading this thread I believe this gives us 3 options:
1) Configure a SCAN listener and have all applications, and all management/administration, connecting to the corresponding database on the same cluster via that SCAN listener, all on the same subnet.
2) Configure a SCAN listener for use by all applications connecting to the corresponding database on the same cluster, and use TNSNAMES/VIP for management/administration traffic, both on separate subnets (by configuring the LISTENER_NETWORKS parameter)
3) Configure a SCAN listener for use by applications connecting to one of the databases on the cluster via one subnet, use TNSNAMES/VIP for all other applications connecting to other databases, each using their own subnet. Plus, the management/administration could be via another subnet utilising TNSNAMES/VIP.
From our perspective we will work out the best one for us and implement accordingly.
Thanks again for your timely and comprehensive response.

Connection error mysql database in Dreamweaver

the error message is - HTTP error code 404 file not found. here are some possible reasons
screen shot - http://netwizlk.site50.net/images/DW-error.jpg
1)there is no testing server running on the server machine.
2)the testing server specified for this site does not map to the http://localhost/_mmServerScripts/MMhTTPDB.php verify that the URL prefix maps to the root of the site.
guy pls help me to solve this problem. I tried several times to connect my mysql database with dreamweaver but ended up having this error I reinstalled dreamweaver cs4 and XAMPP still the error is not rectified my both remote and local files are stored in XAMPP server location called in c:\xampp\htdocs\htdocs\myweb
anybody who could give me a speedy solution for this issue will be highly appreciated thanks alot guys.

c:\xampp\htdocs\htdocs\myweb
MM serverscripts must be at the root level of the virtual server, that is directly in the htdocs folder.
Mylenium

Time out connection in the classes12.zip

Hello,
How can I change the time out connection to my database in Java ? I use the JDBC thin driver (classes12.zip) to connect to an 8.1.6 standard Oracle edition on an NT Server.
I tested a network problem connection removing the network cable and then my application waits 20 minutes to raise an exception.
Thanks
Guillaume Facon

You need to set a tcpip timeout at the os level. Oracle jdbc does not support timeouts.

Create RAC Database Connection in Sql Developer

Hi All,
Can you please let me know how to create a new connection for a RAC Database. When we use the scan IP and service name, it always displays the network adapter could not establish the connection, even though the listener and database are up and running. After repeatedly, trying atlease 20 times, then it will connect to the database. There are no issue while connecting to a single instance database.
Thanks & Regards,
Krishna

Hi Krishna,
You don't give any details about version numbers but, in general, the Basic connection type should work -- there is no need to use TNSNames. If you can connect to the RAC system via SQL*Plus with an EZConnect string, one would hope the same host/port/service works in SQL Developer for a Basic connection type. But that may be just a hope, I suppose, depending on your overall configuration for SCAN. Or perhaps you pass the full TNS descriptor to connect to SQL*Plus?
In case of long thin RAC JDBC URL, presumably you mean including the full TNS descriptor in the url. I really did not find very much on the forums regarding SCAN, but searching more widely on the internet I note someone resolving a JDBC-specific issue (where SQL*Plus connects just fine) with comments like this: +"The host name in the connectiong string be the same as the init.ora parameter remote_listener and it should also match to the SCAN name. We should not include any domain names with SCAN name , remote_listername and with HOST setting in connecting string"+. So apparently you have to be very careful with the url specification.
Hope this helps,
Gary

Connecting to the database taking long time to connect database server

Hi
When I execute procedure i am getting the below message at bottom of the Oracle SQL Developer
"Connecting to the database"
it is taking more than 10 min plz guide

Hi
have you installed a normal Oracle Client also on your Host? normal Oracle Client
Did you connect with host:port:sid or with a Oracle Naming Service? through TNS Service
Can you test tnsping <alias> yes, It is working fine
Did other user have the same problem? yes
Did you connect through WAN or LAN connection? LAN (Intranet)
Can you tell more about you client/database setup?
Database setup:
OS: Window 2008 server
version: 11.1.0
Client: 11.1.0
OS: Window 2008 server
Now I am not able to execute single select query which table contains 6 records and 15 columns it is taking long time I have waited 30 min still no resutls
only one table is behaving like this remaining is working fine
Edited by: user9235224 on Oct 6, 2012 7:06 PM

How do I update/change the connect descriptor for a target RAC database in Cloud Control

I have Cloud Control 12c Release 3 set up and monitoring many hosts and targets. However when monitoring my RAC (2 nodes), it cannot connect to the database instances (although it shows them as up). I get the message "IO Error: The Network Adapter could not establish the connection". I can see that the connect descriptior is using the vip, rather than the hostname.
How can I update the connect descriptor within Cloud Control to the correct values?

Modify the monitoring configuration following the below listed note
How to Modify/Update Monitoring Configuration of a Target Database or Listener in 12C Cloud Control (Doc ID 1385769.1)

Not able to connect RAC database from client

Hi there
Recently I have configured RAC in test environment. version 11.2.0.1. OS Redhat 5.9. Everything seems to be fine except not able to connect rac database from client. Error is as under :
C:\Documents and Settings\pbl>sqlplus test1/test1@myrac
SQL*Plus: Release 10.2.0.1.0 - Production on Mon Nov 17 14:29:06 2014
Copyright (c) 1982, 2005, Oracle. All rights reserved.
ERROR:
ORA-12545: Connect failed because target host or object does not exist
Enter user-name:
myrac =
(DESCRIPTION =
    (ADDRESS_LIST =
      (ADDRESS = (PROTOCOL = TCP)(HOST = rac-scan)(PORT = 1521))
    (CONNECT_DATA =
      (SERVICE_NAME = racdb.testdb.com.bd)
Please give me your valuable suggestion to overcome the issue.
Regards
Jewel

user13134974 wrote:
ORA-12545: Connect failed because target host or object does not exist
This error means that the hostname or IP address used in the TNS connection string, failed to resolve or connect.
Your client is making two connections. The first connection is to the SCAN listener. It matches a db instance for your connection request based on service requested, available registered service handlers, load balancing, and so on. It then send a redirect to your client informing it of the handler for that service.
Your client then does a second connection to this service (a local RAC listener that will provide you with a connection to the local RAC instance). This is what seems to be failing in your case.
The SCAN listener's redirect uses the hostname of the server that the local listener is running on. Your client needs to resolve that hostname (of a RAC node) to an IP address. This likely fails.
You can add the RAC node hostnames to your client platforms hosts file. The appropriate action however would be to ensure that DNS is used for name resolution instead.

Connect Database Host Name in Oracle Rac Database

Hi All,
I am using Oracle SES 11g to create a "Table Source" and a have following question.
I have to added new table source to crawl, in the field "Database Host Name" i want to connect with Oracle Rac Database Server with two node.
I am searching in the document and i can't find any relevant on that scenario.
Can anyone help me in that ?
Thank you.
NG

Check this Rittman Mead Consulting &raquo; Blog Archive &raquo; Oracle BI EE 11g – Managing Host Name Changes

RAC database cannot be connected after Grid and RAC DB have been installed

Folks,
Hello. I am installing Oracle 11gR2 RAC using 2 VMs (main VM rac1 and slave VM rac2) with Oracle Linux 5.6
according to the website http://appsdbaworkshop.blogspot.com/2011/10/11gr2-rac-on-linux-56-using-vmware.html
Grid and RAC database have been installed successfully for both VMs rac1 and rac2. I am using the slave VM rac2 to test Grid and RAC database.
I have run the commands as below:
[ora11g@rac2 bin]$ pwd
/u01/app/grid/bin
[ora11g@rac2 bin]$ ./crsctl status resource
CRS-4535: Cannot communicate with Cluster Ready Services
CRS-4000: Command Status failed, or completed with errors.
[ora11g@rac2 bin]$ ./srvctl config database -d racdb
PRCD-1027 : Failed to retrieve database racdb
PRCR-1070 : Failed to check if resource ora.racdb.db is registered
Cannot communicate with crsd
[ora11g@rac2 bin]$ ./sqlplus SYS/SYS
SQL*Plus: Release 11.2.0.1.0 Production on Sat Mar 10 14:07:07 2012
Copyright (c) 1982, 2009, Oracle. All rights reserved.
ERROR:
ORA-01034: ORACLE not available
ORA-27101: shared memory realm does not exist
Linux-x86_64 Error: 2: No such file or directory
Process ID: 0
Session ID: 0 Serial number: 0
Enter user-name: SYS
Enter password:
ERROR:
ORA-01034: ORACLE not available
ORA-27101: shared memory realm does not exist
Linux-x86_64 Error: 2: No such file or directory
Process ID: 0
Session ID: 0 Serial number: 0
Enter user-name: SYSTEM
Enter password:
ERROR:
ORA-01034: ORACLE not available
ORA-27101: shared memory realm does not exist
Linux-x86_64 Error: 2: No such file or directory
Process ID: 0
Session ID: 0 Serial number: 0
SP2-0157: unable to CONNECT to ORACLE after 3 attempts, exiting SQL*Plus
[ora11g@rac2 /]$ /u02/11g_db/ora11g/racdb/sqldeveloper/sqldeveloper.sh
In its GUI, the inputs are below:
Connection: C1
Username: SYS
PWD: SYS
Role: SYSDBA
Connection Type: Basic
Hostname: rac2.localdomain
Port: 1521
SID: racdb2
Test: failed. Network Adapter could not establish connection.
Browser url: https://rac2.localdomain:1158/em
Its output: cannot connect to the server at https://rac2.localdomain:1158/em
As we see the outputs for commands above, Grid is running at the beginning but now is not running. SQLPLUS and SQLdeveloper cannot connect with database. Browser url cannot connect to the console https://rac2.localdomain:1158/em.
My question is:
Do any folks understand how to solve the above 4 problems ?
Thanks.

Folks,
Hello. Thanks a lot for replying. The last 50 lines of the file "ocssd.log" is as below:
[ora11g@rac1 cssd]$ pwd
/u01/app/grid/log/rac1/cssd
[ora11g@rac1 cssd]$ ls
cssdOUT.log ocssd.log ocssd.trc
[ora11g@rac1 cssd]$ cat ocssd.log
2012-03-08 21:13:54.415: [    CLSF][1150617920]Destroying CLSF context
2012-03-08 21:13:55.418: [    CLSF][1150617920]Allocated CLSF context
2012-03-08 21:13:55.418: [   SKGFD][1150617920]Handle 0x7105660 from lib :ASM:/opt/oracle/extapi/64/asm/orcl/1/libasm.so: for disk :ORCL:ASMDISK1:
2012-03-08 21:13:55.418: [    CLSF][1150617920]Opened hdl:0x710d800 for dev:ORCL:ASMDISK1:
2012-03-08 21:13:55.470: [    CLSF][1150617920]Closing handle:0x710d800
2012-03-08 21:13:55.470: [   SKGFD][1150617920]Lib :ASM:/opt/oracle/extapi/64/asm/orcl/1/libasm.so: closing handle 0x7105660 for disk :ORCL:ASMDISK1:
2012-03-08 21:13:55.470: [    CLSF][1150617920]Destroying CLSF context
2012-03-08 21:13:56.472: [    CSSD][1685425920]clssnmlfmtlease: uniqueness 1331259161, gipc addr nm_rac-scan#192.168.137.35#36456
2012-03-08 21:13:56.608: [    CSSD][1685425920]clssnmvStatusBlkInit: myinfo nodename rac1, uniqueness 0
2012-03-08 21:13:56.697: [    CSSD][1685425920]clssnmvStatusBlkInit: myinfo nodename rac1, uniqueness 0
2012-03-08 21:13:56.754: [    CSSD][1685425920]clssnmvStatusBlkInit: myinfo nodename rac1, uniqueness 0
2012-03-08 21:13:57.425: [    CSSD][1685425920]clssnmlgetslot:lease acquisition for node rac1/slot 1 completed in 19380 msecs
2012-03-08 21:13:57.559: [    CSSD][1685425920]clssnmvDHBValidateNCopy: node 1, , has a disk HB, but no network HB, DHB has rcfg 226426240, wrtcnt, 89443, LATS 4294905400, lastSeqNo 89443, uniqueness 0, timestamp 1331258081/38436564
2012-03-08 21:13:57.559: [    CSSD][1685425920]clssnmvDHBValidateNCopy: node 2, , has a disk HB, but no network HB, DHB has rcfg 226426240, wrtcnt, 80216, LATS 4294905400, lastSeqNo 80216, uniqueness 1331259094, timestamp 1331259236/4294905820
2012-03-08 21:13:57.860: [    CSSD][1685425920]clssnmvDHBValidateNCopy: node 1, rac1, has a disk HB, but no network HB, DHB has rcfg 226426240, wrtcnt, 89444, LATS 4294905700, lastSeqNo 89444, uniqueness 0, timestamp 1331258081/38436564
2012-03-08 21:13:57.860: [    CSSD][1685425920]clssnmvDHBValidateNCopy: node 2, rac2, has a disk HB, but no network HB, DHB has rcfg 226426240, wrtcnt, 80217, LATS 4294905700, lastSeqNo 80217, uniqueness 1331259094, timestamp 1331259237/4294906920
2012-03-08 21:13:58.049: [    CSSD][1685425920]clssnmvDHBValidate2012-03-10 12:07:08.298: [    CSSD][471957248]clssscmain: Starting CSS daemon, version 11.2.0.1.0, in (clustered) mode with uniqueness value 1331399227
2012-03-10 12:07:08.300: [    CSSD][471957248]clssscmain: Environment is production
2012-03-10 12:07:08.300: [    CSSD][471957248]clssscmain: Core file size limit extended
2012-03-10 12:07:08.518: [    CSSD][471957248]clssscGetParameterOLR: OLR fetch for parameter logsize (8) failed with rc 21
2012-03-10 12:07:08.518: [    CSSD][471957248]clssscSetPrivEnv: IPMI device not installed on this node
2012-03-10 12:07:08.519: [    CSSD][471957248]clssscGetParameterOLR: OLR fetch for parameter priority (15) failed with rc 21
2012-03-10 12:07:09.675: [    CSSD][471957248]clssscExtendLimits: The current soft limit for file descriptors is 65536, hard limit is 65536
2012-03-10 12:07:09.675: [    CSSD][471957248]clssscExtendLimits: The current soft limit for locked memory is 4294967295, hard limit is 4294967295
2012-03-10 12:07:09.675: [    CSSD][471957248]clssscmain: Running as user ora11g
[ clsdmt][1088276800]Listening to (ADDRESS=(PROTOCOL=ipc)(KEY=rac1DBG_CSSD))
2012-03-10 12:07:09.821: [ clsdmt][1088276800]PID for the Process [5971], connkey 4
2012-03-10 12:07:09.822: [    CSSD][471957248]clssscGetParameterOLR: OLR fetch for parameter auth rep (9) failed with rc 21
2012-03-10 12:07:09.823: [    CSSD][471957248]clssscGetParameterOLR: OLR fetch for parameter diagwait (14) failed with rc 21
2012-03-10 12:07:09.847: [    CSSD][471957248]clssscmain: initgminfo done
2012-03-10 12:07:09.971: [    CSSD][1098766656]clssgmclientlsnr: Spawned
2012-03-10 12:07:09.971: [    CSSD][1098766656]clssgmEvtInformation: reqtype (13) cmProc ((nil)) client ((nil))
2012-03-10 12:07:09.971: [    CSSD][1098766656]clssgmEvtInformation: reqtype (13) req (0xadd7b20)
2012-03-10 12:07:09.971: [    CSSD][1098766656]clssnmQueueNotification: type (13) 0xadd7b20
2012-03-10 12:07:09.973: [    CSSD][1098766656]clssscGetParameterOLR: OLR fetch for parameter GIPC client trclvl (13) failed with rc 21
2012-03-10 12:07:09.975: [    CSSD][1098766656]clssgmclientlsnr: listening on clsc://(ADDRESS=(PROTOCOL=ipc)(KEY=OCSSD_LL_rac1_)(GIPCID=903cec19-00000000-5971))
2012-03-10 12:07:09.975: [    GPnP][471957248]clsgpnp_Init: [at clsgpnp0.c:404] gpnp tracelevel 3, component tracelevel 0
2012-03-10 12:07:09.975: [    GPnP][471957248]clsgpnp_Init: [at clsgpnp0.c:534] '/u01/app/grid' in effect as GPnP home base.
2012-03-10 12:07:10.044: [GIPCCLSA][1098766656]gipcmodClsaCompleteAccept: failed on clsaauthstart ret clsaretOSD (8), endp 0xade1aa0 [000000000000002f] { gipcEndpoint : localAddr 'clsc://(ADDRESS=(PROTOCOL=ipc)(KEY=OCSSD_LL_rac1_)(GIPCID=e1fdf67e-e0b9ca68-5971))', remoteAddr 'clsc://(ADDRESS=(PROTOCOL=ipc)(KEY=OCSSD_LL_rac1_)(GIPCID=e0b9ca68-e1fdf67e-5976))', numPend 5, numReady 0, numDone 0, numDead 0, numTransfer 0, objFlags 0x1758, pidPeer 0, flags 0x603710, usrFlags 0x14000 }
2012-03-10 12:07:10.044: [GIPCCLSA][1098766656]gipcmodClsaCompleteAccept: slos op : mkdir
2012-03-10 12:07:10.044: [GIPCCLSA][1098766656]gipcmodClsaCompleteAccept: slos dep : No space left on device (28)
2012-03-10 12:07:10.044: [GIPCCLSA][1098766656]gipcmodClsaCompleteAccept: slos loc : authprep6
2012-03-10 12:07:10.044: [GIPCCLSA][1098766656]gipcmodClsaCompleteAccept: slos info: failed to make dir /u01/app/grid/auth/css/rac1/A2370613
2012-03-10 12:07:10.045: [GIPCXCPT][1098766656]gipcmodMuxTransferAccept: internal accept request failed endp 0xade0740 [000000000000001b] { gipcEndpoint : localAddr 'clsc://(ADDRESS=(PROTOCOL=ipc)(KEY=OCSSD_LL_rac1_)(GIPCID=903cec19-00000000-5971))', remoteAddr '', numPend 0, numReady 0, numDone 0, numDead 0, numTransfer 0, objFlags 0x0, pidPeer 0, flags 0x30613, usrFlags 0x10010 }, ret gipcretAuthFail (22)
2012-03-10 12:07:10.045: [ GIPCMUX][1098766656]gipcmodMuxTransferAccept: EXCEPTION[ ret gipcretAuthFail (22) ] error during accept on endp 0xade0740 [000000000000001b] { gipcEndpoint : localAddr 'clsc://(ADDRESS=(PROTOCOL=ipc)(KEY=OCSSD_LL_rac1_)(GIPCID=903cec19-00000000-5971))', remoteAddr '', numPend 02012-03-10 12:21:34.610: [    CSSD][4216872704]clssscmain: Starting CSS daemon, version 11.2.0.1.0, in (clustered) mode with uniqueness value 1331400094
2012-03-10 12:21:34.612: [    CSSD][4216872704]clssscmain: Environment is production
2012-03-10 12:21:34.612: [    CSSD][4216872704]clssscmain: Core file size limit extended
2012-03-10 12:21:34.675: [    CSSD][4216872704]clssscGetParameterOLR: OLR fetch for parameter logsize (8) failed with rc 21
2012-03-10 12:21:34.675: [    CSSD][4216872704]clssscSetPrivEnv: IPMI device not installed on this node
2012-03-10 12:21:34.676: [    CSSD][4216872704]clssscGetParameterOLR: OLR fetch for parameter priority (15) failed with rc 21
2012-03-10 12:21:34.770: [    CSSD][4216872704]clssscExtendLimits: The current soft limit for file descriptors is 65536, hard limit is 65536
2012-03-10 12:21:34.770: [    CSSD][4216872704]clssscExtendLimits: The current soft limit for locked memory is 4294967295, hard limit is 4294967295
2012-03-10 12:21:34.771: [    CSSD][4216872704]clssscmain: Running as user ora11g
[ clsdmt][1123064128]Listening to (ADDRESS=(PROTOCOL=ipc)(KEY=rac1DBG_CSSD))
2012-03-10 12:21:37.926: [ clsdmt][1123064128]PID for the Process [6687], connkey 4
2012-03-10 12:21:38.276: [    CSSD][4216872704]clssscGetParameterOLR: OLR fetch for parameter auth rep (9) failed with rc 21
2012-03-10 12:21:38.276: [    CSSD][4216872704]clssscGetParameterOLR: OLR fetch for parameter diagwait (14) failed with rc 21
2012-03-10 12:21:39.171: [    CSSD][4216872704]clssscmain: initgminfo done
2012-03-10 12:21:42.815: [    CSSD][1144043840]clssgmclientlsnr: Spawned
2012-03-10 12:21:42.815: [    CSSD][1144043840]clssgmEvtInformation: reqtype (13) cmProc ((nil)) client ((nil))
2012-03-10 12:21:42.815: [    CSSD][1144043840]clssgmEvtInformation: reqtype (13) req (0x1a5a7160)
2012-03-10 12:21:42.815: [    CSSD][1144043840]clssnmQueueNotification: type (13) 0x1a5a7160
2012-03-10 12:21:42.822: [    CSSD][1144043840]clssscGetParameterOLR: OLR fetch for parameter GIPC client trclvl (13) failed with rc 21
2012-03-10 12:21:42.872: [    CSSD][1144043840]clssgmclientlsnr: listening on clsc://(ADDRESS=(PROTOCOL=ipc)(KEY=OCSSD_LL_rac1_)(GIPCID=45c3536d-00000000-6687))
2012-03-10 12:21:42.873: [    GPnP][4216872704]clsgpnp_Init: [at clsgpnp0.c:404] gpnp tracelevel 3, component tracelevel 0
2012-03-10 12:21:42.873: [    GPnP][4216872704]clsgpnp_Init: [at clsgpnp0.c:534] '/u01/app/grid' in effect as GPnP home base.
2012-03-10 12:21:43.190: [GIPCCLSA][1144043840]gipcmodClsaCompleteAccept: failed on clsaauthstart ret clsaretOSD (8), endp 0x1a5b10e0 [000000000000002f] { gipcEndpoint : localAddr 'clsc://(ADDRESS=(PROTOCOL=ipc)(KEY=OCSSD_LL_rac1_)(GIPCID=c53aa194-7b930898-6687))', remoteAddr 'clsc://(ADDRESS=(PROTOCOL=ipc)(KEY=OCSSD_LL_rac1_)(GIPCID=7b930898-c53aa194-5928))', numPend 5, numReady 0, numDone 0, numDead 0, numTransfer 0, objFlags 0x1728, pidPeer 0, flags 0x603710, usrFlags 0x14000 }
2012-03-10 12:21:43.190: [GIPCCLSA][1144043840]gipcmodClsaCompleteAccept: slos op : mkdir
2012-03-10 12:21:43.190: [GIPCCLSA][1144043840]gipcmodClsaCompleteAccept: slos dep : No space left on device (28)
2012-03-10 12:21:43.190: [GIPCCLSA][1144043840]gipcmodClsaCompleteAccept: slos loc : authprep6
2012-03-10 12:21:43.190: [GIPCCLSA][1144043840]gipcmodClsaCompleteAccept: slos info: failed to make dir /u01/app/grid/auth/css/rac1/A3702366
2012-03-10 12:21:43.201: [GIPCXCPT][1144043840]gipcmodMuxTransferAccept: internal accept request failed endp 0x1a5afd80 [000000000000001b] { gipcEndpoint : localAddr 'clsc://(ADDRESS=(PROTOCOL=ipc)(KEY=OCSSD_LL_rac1_)(GIPCID=45c3536d-00000000-6687))', remoteAddr '', numPend 0, numReady 0, numDone 0, numDead 0, numTransfer 0, objFlags 0x0, pidPeer 0, flags 0x30613, usrFlags 0x10010 }, ret gipcretAuthFail (22)
2012-03-10 12:21:43.201: [ GIPCMUX][1144043840]gipcmodMuxTransferAccept: EXCEPTION[ ret gipcretAuthFail (22) ] error during accept on endp 0x1a5afd80 [000000000000001b] { gipcEndpoint : localAddr 'clsc://(ADDRESS=(PROTOCOL=ipc)(KEY=OCSSD_LL_rac1_)(GIPCID=45c3536d-00000000-6687))', remot2012-03-11 11:17:15.417: [    CSSD][1249378048]clssscmain: Starting CSS daemon, version 11.2.0.1.0, in (clustered) mode with uniqueness value 1331479035
2012-03-11 11:17:15.418: [    CSSD][1249378048]clssscmain: Environment is production
2012-03-11 11:17:15.418: [    CSSD][1249378048]clssscmain: Core file size limit extended
2012-03-11 11:17:15.797: [    CSSD][1249378048]clssscGetParameterOLR: OLR fetch for parameter logsize (8) failed with rc 21
2012-03-11 11:17:15.797: [    CSSD][1249378048]clssscSetPrivEnv: IPMI device not installed on this node
2012-03-11 11:17:15.798: [    CSSD][1249378048]clssscGetParameterOLR: OLR fetch for parameter priority (15) failed with rc 21
2012-03-11 11:17:17.472: [    CSSD][1249378048]clssscExtendLimits: The current soft limit for file descriptors is 65536, hard limit is 65536
2012-03-11 11:17:17.472: [    CSSD][1249378048]clssscExtendLimits: The current soft limit for locked memory is 4294967295, hard limit is 4294967295
2012-03-11 11:17:17.473: [    CSSD][1249378048]clssscmain: Running as user ora11g
[ clsdmt][1098090816]Listening to (ADDRESS=(PROTOCOL=ipc)(KEY=rac1DBG_CSSD))
2012-03-11 11:17:17.517: [ clsdmt][1098090816]PID for the Process [5960], connkey 4
2012-03-11 11:17:17.573: [    CSSD][1249378048]clssscGetParameterOLR: OLR fetch for parameter auth rep (9) failed with rc 21
2012-03-11 11:17:17.574: [    CSSD][1249378048]clssscGetParameterOLR: OLR fetch for parameter diagwait (14) failed with rc 21
2012-03-11 11:17:17.586: [    CSSD][1249378048]clssscmain: initgminfo done
2012-03-11 11:17:17.617: [    CSSD][1141242176]clssgmclientlsnr: Spawned
2012-03-11 11:17:17.617: [    CSSD][1141242176]clssgmEvtInformation: reqtype (13) cmProc ((nil)) client ((nil))
2012-03-11 11:17:17.617: [    CSSD][1141242176]clssgmEvtInformation: reqtype (13) req (0x129d5160)
2012-03-11 11:17:17.617: [    CSSD][1141242176]clssnmQueueNotification: type (13) 0x129d5160
2012-03-11 11:17:17.619: [    CSSD][1141242176]clssscGetParameterOLR: OLR fetch for parameter GIPC client trclvl (13) failed with rc 21
2012-03-11 11:17:17.621: [    CSSD][1141242176]clssgmclientlsnr: listening on clsc://(ADDRESS=(PROTOCOL=ipc)(KEY=OCSSD_LL_rac1_)(GIPCID=38fc0b43-00000000-5960))
2012-03-11 11:17:17.621: [    GPnP][1249378048]clsgpnp_Init: [at clsgpnp0.c:404] gpnp tracelevel 3, component tracelevel 0
2012-03-11 11:17:17.621: [    GPnP][1249378048]clsgpnp_Init: [at clsgpnp0.c:534] '/u01/app/grid' in effect as GPnP home base.
2012-03-11 11:17:18.167: [GIPCCLSA][1141242176]gipcmodClsaCompleteAccept: failed on clsaauthstart ret clsaretOSD (8), endp 0x129df0e0 [000000000000002f] { gipcEndpoint : localAddr 'clsc://(ADDRESS=(PROTOCOL=ipc)(KEY=OCSSD_LL_rac1_)(GIPCID=22574215-7bcb9bab-5960))', remoteAddr 'clsc://(ADDRESS=(PROTOCOL=ipc)(KEY=OCSSD_LL_rac1_)(GIPCID=7bcb9bab-22574215-5919))', numPend 5, numReady 0, numDone 0, numDead 0, numTransfer 0, objFlags 0x171f, pidPeer 0, flags 0x603710, usrFlags 0x14000 }
2012-03-11 11:17:18.167: [GIPCCLSA][1141242176]gipcmodClsaCompleteAccept: slos op : mkdir
2012-03-11 11:17:18.167: [GIPCCLSA][1141242176]gipcmodClsaCompleteAccept: slos dep : No space left on device (28)
2012-03-11 11:17:18.167: [GIPCCLSA][1141242176]gipcmodClsaCompleteAccept: slos loc : authprep6
2012-03-11 11:17:18.167: [GIPCCLSA][1141242176]gipcmodClsaCompleteAccept: slos info: failed to make dir /u01/app/grid/auth/css/rac1/A2554722
2012-03-11 11:17:18.168: [GIPCXCPT][1141242176]gipcmodMuxTransferAccept: internal accept request failed endp 0x129ddd80 [000000000000001b] { gipcEndpoint : localAddr 'clsc://(ADDRESS=(PROTOCOL=ipc)(KEY=OCSSD_LL_rac1_)(GIPCID=38fc0b43-00000000-5960))', remoteAddr '', numPend 0, numReady 0, numDone 0, numDead 0, numTransfer 0, objFlags 0x0, pidPeer 0, flags 0x30613, usrFlags 0x10010 }, ret gipcretAuthFail (22)
2012-03-11 11:17:18.168: [ GIPCMUX][1141242176]gipcmodMuxTransferAccept: EXCEPTION[ ret gipcretAuthFail (22) ] error during accept on endp 0x129ddd80 [000000000000001b] { gipcEndpoint : localAddr 'clsc://(ADDRESS=(PROTOCOL=ipc)(KEY=OCSSD_LL_rac1_)(GIPCID=38fc0b43-00000000-5960))', remot2012-03-11 13:50:45.588: [    CSSD][1847344896]clssscmain: Starting CSS daemon, version 11.2.0.1.0, in (clustered) mode with uniqueness value 1331488245
2012-03-11 13:50:45.589: [    CSSD][1847344896]clssscmain: Environment is production
2012-03-11 13:50:45.589: [    CSSD][1847344896]clssscmain: Core file size limit extended
2012-03-11 13:50:45.812: [    CSSD][1847344896]clssscGetParameterOLR: OLR fetch for parameter logsize (8) failed with rc 21
2012-03-11 13:50:45.812: [    CSSD][1847344896]clssscSetPrivEnv: IPMI device not installed on this node
2012-03-11 13:50:45.813: [    CSSD][1847344896]clssscGetParameterOLR: OLR fetch for parameter priority (15) failed with rc 21
2012-03-11 13:50:46.364: [    CSSD][1847344896]clssscExtendLimits: The current soft limit for file descriptors is 65536, hard limit is 65536
2012-03-11 13:50:46.364: [    CSSD][1847344896]clssscExtendLimits: The current soft limit for locked memory is 4294967295, hard limit is 4294967295
2012-03-11 13:50:46.365: [    CSSD][1847344896]clssscmain: Running as user ora11g
[ clsdmt][1106819392]Listening to (ADDRESS=(PROTOCOL=ipc)(KEY=rac1DBG_CSSD))
2012-03-11 13:50:46.512: [ clsdmt][1106819392]PID for the Process [5598], connkey 4
2012-03-11 13:50:46.518: [    CSSD][1847344896]clssscGetParameterOLR: OLR fetch for parameter auth rep (9) failed with rc 21
2012-03-11 13:50:46.521: [    CSSD][1847344896]clssscGetParameterOLR: OLR fetch for parameter diagwait (14) failed with rc 21
2012-03-11 13:50:46.548: [    CSSD][1847344896]clssscmain: initgminfo done
2012-03-11 13:50:46.611: [    CSSD][1090939200]clssgmclientlsnr: Spawned
2012-03-11 13:50:46.611: [    CSSD][1090939200]clssgmEvtInformation: reqtype (13) cmProc ((nil)) client ((nil))
2012-03-11 13:50:46.611: [    CSSD][1090939200]clssgmEvtInformation: reqtype (13) req (0x196b6160)
2012-03-11 13:50:46.611: [    CSSD][1090939200]clssnmQueueNotification: type (13) 0x196b6160
2012-03-11 13:50:46.618: [    CSSD][1090939200]clssscGetParameterOLR: OLR fetch for parameter GIPC client trclvl (13) failed with rc 21
2012-03-11 13:50:46.621: [    CSSD][1090939200]clssgmclientlsnr: listening on clsc://(ADDRESS=(PROTOCOL=ipc)(KEY=OCSSD_LL_rac1_)(GIPCID=e5a0c08e-00000000-5598))
2012-03-11 13:50:46.621: [    GPnP][1847344896]clsgpnp_Init: [at clsgpnp0.c:404] gpnp tracelevel 3, component tracelevel 0
2012-03-11 13:50:46.622: [    GPnP][1847344896]clsgpnp_Init: [at clsgpnp0.c:534] '/u01/app/grid' in effect as GPnP home base.
2012-03-11 13:50:47.158: [GIPCCLSA][1090939200]gipcmodClsaCompleteAccept: failed on clsaauthstart ret clsaretOSD (8), endp 0x196c00e0 [000000000000002f] { gipcEndpoint : localAddr 'clsc://(ADDRESS=(PROTOCOL=ipc)(KEY=OCSSD_LL_rac1_)(GIPCID=629302b2-9f0ad2aa-5598))', remoteAddr 'clsc://(ADDRESS=(PROTOCOL=ipc)(KEY=OCSSD_LL_rac1_)(GIPCID=9f0ad2aa-629302b2-5616))', numPend 5, numReady 0, numDone 0, numDead 0, numTransfer 0, objFlags 0x15f0, pidPeer 0, flags 0x603710, usrFlags 0x14000 }
2012-03-11 13:50:47.158: [GIPCCLSA][1090939200]gipcmodClsaCompleteAccept: slos op : mkdir
2012-03-11 13:50:47.158: [GIPCCLSA][1090939200]gipcmodClsaCompleteAccept: slos dep : No space left on device (28)
2012-03-11 13:50:47.158: [GIPCCLSA][1090939200]gipcmodClsaCompleteAccept: slos loc : authprep6
2012-03-11 13:50:47.158: [GIPCCLSA][1090939200]gipcmodClsaCompleteAccept: slos info: failed to make dir /u01/app/grid/auth/css/rac1/A8205079
2012-03-11 13:50:47.159: [GIPCXCPT][1090939200]gipcmodMuxTransferAccept: internal accept request failed endp 0x196bed80 [000000000000001b] { gipcEndpoint : localAddr 'clsc://(ADDRESS=(PROTOCOL=ipc)(KEY=OCSSD_LL_rac1_)(GIPCID=e5a0c08e-00000000-5598))', remoteAddr '', numPend 0, numReady 0, numDone 0, numDead 0, numTransfer 0, objFlags 0x0, pidPeer 0, flags 0x30613, usrFlags 0x10010 }, ret gipcretAuthFail (22)
2012-03-11 13:50:47.159: [ GIPCMUX][1090939200]gipcmodMuxTransferAccept: EXCEPTION[ ret gipcretAuthFail (22) ] error during accept on endp 0x196bed80 [000000000000001b] { gipcEndpoint : localAddr 'clsc://(ADDRESS=(PROTOCOL=ipc)(KEY=OCSSD_LL_rac1_)(GIPCID=e5a0c08e-00000000-5598))', remot2012-03-11 14:15:32.370: [    CSSD][2372304640]clssscmain: Starting CSS daemon, version 11.2.0.1.0, in (clustered) mode with uniqueness value 1331489730
2012-03-11 14:15:32.383: [    CSSD][2372304640]clssscmain: Environment is production
2012-03-11 14:15:32.384: [    CSSD][2372304640]clssscmain: Core file size limit extended
2012-03-11 14:15:32.933: [    CSSD][2372304640]clssscGetParameterOLR: OLR fetch for parameter logsize (8) failed with rc 21
2012-03-11 14:15:32.933: [    CSSD][2372304640]clssscSetPrivEnv: IPMI device not installed on this node
2012-03-11 14:15:32.935: [    CSSD][2372304640]clssscGetParameterOLR: OLR fetch for parameter priority (15) failed with rc 21
2012-03-11 14:15:48.413: [    CSSD][2372304640]clssscExtendLimits: The current soft limit for file descriptors is 65536, hard limit is 65536
2012-03-11 14:15:48.413: [    CSSD][2372304640]clssscExtendLimits: The current soft limit for locked memory is 4294967295, hard limit is 4294967295
2012-03-11 14:15:48.421: [    CSSD][2372304640]clssscmain: Running as user ora11g
[ clsdmt][1119824192]Listening to (ADDRESS=(PROTOCOL=ipc)(KEY=rac1DBG_CSSD))
2012-03-11 14:16:21.102: [ clsdmt][1119824192]PID for the Process [7155], connkey 4
2012-03-11 14:16:22.219: [    CSSD][2372304640]clssscGetParameterOLR: OLR fetch for parameter auth rep (9) failed with rc 21
2012-03-11 14:16:22.221: [    CSSD][2372304640]clssscGetParameterOLR: OLR fetch for parameter diagwait (14) failed with rc 21
2012-03-11 14:16:27.367: [    CSSD][2372304640]clssscmain: initgminfo done
2012-03-11 14:16:43.377: [    CSSD][1140803904]clssgmclientlsnr: Spawned
2012-03-11 14:16:43.378: [    CSSD][1140803904]clssgmEvtInformation: reqtype (13) cmProc ((nil)) client ((nil))
2012-03-11 14:16:43.378: [    CSSD][1140803904]clssgmEvtInformation: reqtype (13) req (0x6964160)
2012-03-11 14:16:43.378: [    CSSD][1140803904]clssnmQueueNotification: type (13) 0x6964160
2012-03-11 14:16:43.389: [    CSSD][1140803904]clssscGetParameterOLR: OLR fetch for parameter GIPC client trclvl (13) failed with rc 21
2012-03-11 14:16:43.554: [    CSSD][1140803904]clssgmclientlsnr: listening on clsc://(ADDRESS=(PROTOCOL=ipc)(KEY=OCSSD_LL_rac1_)(GIPCID=f8ea6223-00000000-7155))
2012-03-11 14:16:43.555: [    GPnP][2372304640]clsgpnp_Init: [at clsgpnp0.c:404] gpnp tracelevel 3, component tracelevel 0
2012-03-11 14:16:43.555: [    GPnP][2372304640]clsgpnp_Init: [at clsgpnp0.c:534] '/u01/app/grid' in effect as GPnP home base.
2012-03-11 14:16:44.146: [GIPCCLSA][1140803904]gipcmodClsaCompleteAccept: failed on clsaauthstart ret clsaretOSD (8), endp 0x696e0e0 [000000000000002f] { gipcEndpoint : localAddr 'clsc://(ADDRESS=(PROTOCOL=ipc)(KEY=OCSSD_LL_rac1_)(GIPCID=0448e4a3-ad06465f-7155))', remoteAddr 'clsc://(ADDRESS=(PROTOCOL=ipc)(KEY=OCSSD_LL_rac1_)(GIPCID=ad06465f-0448e4a3-7132))', numPend 5, numReady 0, numDone 0, numDead 0, numTransfer 0, objFlags 0x1bdc, pidPeer 0, flags 0x603710, usrFlags 0x14000 }
2012-03-11 14:16:44.147: [GIPCCLSA][1140803904]gipcmodClsaCompleteAccept: slos op : mkdir
2012-03-11 14:16:44.147: [GIPCCLSA][1140803904]gipcmodClsaCompleteAccept: slos dep : No space left on device (28)
2012-03-11 14:16:44.147: [GIPCCLSA][1140803904]gipcmodClsaCompleteAccept: slos loc : authprep6
2012-03-11 14:16:44.147: [GIPCCLSA][1140803904]gipcmodClsaCompleteAccept: slos info: failed to make dir /u01/app/grid/auth/css/rac1/A8989982
2012-03-11 14:16:44.147: [GIPCXCPT][1140803904]gipcmodMuxTransferAccept: internal accept request failed endp 0x696cd80 [000000000000001b] { gipcEndpoint : localAddr 'clsc://(ADDRESS=(PROTOCOL=ipc)(KEY=OCSSD_LL_rac1_)(GIPCID=f8ea6223-00000000-7155))', remoteAddr '', numPend 0, numReady 0, numDone 0, numDead 0, numTransfer 0, objFlags 0x0, pidPeer 0, flags 0x30613, usrFlags 0x10010 }, ret gipcretAuthFail (22)
2012-03-11 14:16:44.147: [ GIPCMUX][1140803904]gipcmodMuxTransferAccept: EXCEPTION[ ret gipcretAuthFail (22) ] error during accept on endp 0x696cd80 [000000000000001b] { gipcEndpoint : localAddr 'clsc://(ADDRESS=(PROTOCOL=ipc)(KEY=OCSSD_LL_rac1_)(GIPCID=f8ea6223-00000000-7155))', remoteAddr[ora11g@rac1 cssd]$
My question is:
Could any folk find out the problem that Grid becomes not running after install RAC database ?
Thanks.

Time to connect to RAC database

Similar Messages

Maybe you are looking for