Timeout Parameter

Hi Guys,
I fi want to increase the time out parameter for the ODI to database connection, shall i have to increase it from 30 sec to a minute, where should i put it.

The Oracle Data Integrator Timeout parameter is set in the ODI Designer and Operator tool menu bar from File > User Parameters.
The default value is 30 seconds.
Modifications of these "User Parameters" only impact the local ODI client on which the modifications have been performed. This is to say, the local "userpref.xml" file which is present in the local installation of ODI from which the GUI (Designer, Operator...) has been launched.
If it is necessary to propagate these modifications to other ODI set ups (including Agents or not), then:
* The local (modified) "userpref.xml" file must be copied to the appropriate, remote ODI "/bin" folder and
* The ODI processes must be stopped and relaunched.

Similar Messages

  • How to change timeout parameter value in Oracle 10g R2

    Anyone knows how to change timeout parameter value in Oracle 10g Database R2?

    Waheed Azhar wrote:
    actually i am getting ORA-01013 exception which directly relates to the timeout value but i think it's hidden parameter...What makes you think it's a hidden parameter?
    A search of MetaLink for that error turns up a number of hits, most of which a very situational specific. Exactly what are you doing when you get this error? Are you connecting over an ODBC connection? Are you getting it on a connection request? At db shutdown? During a long-running query?

  • Timeout parameter in Mail communication channel?

    Dear All,
    Can someone tell me if there is a option to put a timeout parameter in Mail PI channel like it is in File channel? One of my FTP channel used to stop polling abruptly, but using this parameter I fixed this problem completely. Now facing a same problem with one of the Mail channel.
    Thanks in advance for your response!.
    Best Regards,
    Kumaran

    Dear Ramesh & Bhavanishankar,
    Thanks for your response!.
    My concern is basically about the mail channel that stopped polling the source folder while the status says "Active". Due to this the interface is totally stopped working in PI and it starts working only when I restart the channel in CC monitoring.
    But yes, I have fixed this issue earlier for a diff mail channel by setting a restart every day (work around) using ATP. This really worked. But I cannot do this for every channel in my server.
    Best Regards,
    Kumaran

  • Increasing the timeout parameter in ODI

    Hi,
    I have got 7000 error code in a step while executing the scenario.
    I have found out it may be time out error and it can be resolved by changing the timeout parameter in ODI(File->Userparameter->Oracle Data Integrator Timeout)
    Is there any maximum limit for this timeout parameter? After changing this, should i restart the ODI server?
    Can anyone suggest me quicly please?
    Am i proceeding correctly for this 7000 error code?

    Hi,
    Please post this question in the ODI forum:
    Data Integrator
    Thanks, Mark

  • Is there any query timeout parameter in oracle

    Hi everybody,
    Is there any timeout for sql queries in oracle,  if so what is the timeout parameter. I googled internet, but couldn't find an answer. Any help is appreciated.
    Thanks

    You can create a profile that limits certain things:
    http://docs.oracle.com/cd/E11882_01/server.112/e41084/statements_6010.htm

  • Timeout parameter in standalone oracle calendar 10.1.2

    I'm trying to locate the timeout parameter in oracle calendar 10.1.2. I have a standalone version. Any help would be appreciated.
    Thanks.

    Assuming you are talking about the timeout value for the web interface, it is in the {installdir}/ocas/conf/ocwc.conf file. The parameter you want to change is ssn_timeout. I believe you will need to restart ocas to make it effective.

  • Connector.open, timeouts parameter

    Hi,
    I'm using Connector.open(String name, int mode, boolean timeouts), where the timeouts parameter = true, to return an HttpConnection, which I then use to send and recieve data with.
    On the motorola devices I've used for testing, an IOException is generated when the server takes longer than ~40seconds to respond, is this due to the device closing the connection due to the timeout value?
    I thought an IOInterruptedException should be thrown if a timeout occurs?
    Also, is the length of the timeout specific to the device?
    Any information about how timeouts work would be greatly appreciated!!

    Hi
    you could go through file \javax\microedition\io\Connectot.java
    it says
    * An optional third parameter is a boolean flag that indicates
    * if the calling code can handle timeout exceptions. If this
    * flag is set, the protocol implementation may throw an
    * InterruptedIOException when it detects a timeout condition.
    * This flag is only a hint to the protocol handler, and it
    * does not guarantee that such exceptions will actually be thrown.
    * If this parameter is not set, no timeout exceptions will be
    * thrown. The timeout period is not specified in the open call
    * because this is protocol specific. Protocol implementors can
    * either hardwire an appropriate value or read them from an
    * external source such as the system properties.
    we can see they do not specify only open could throw
    InterruptedIOException though currently the function
    prototype means only open will throw checked exception
    InterruptedIOException.
    anyway timeout should be implemented
    interoperateing with protocol.java and native function.OK?

  • JCO timeout parameter?

    Dear all,
    We are trying to change a timeout parameter for JCO connections. We use ESS-MSS on our portal and when a user leave it without using the log off process, the system keep some RFC connections during one hour. We would like to keep those connections during only 30 minutes. Do you know how to proceed? Is there any parameter to change? 
    Please note that according to the note 947376 we know that 6 jco metadata connections are always alive to improve performance. But there are some others (for the users) that we would like to close automaticaly after 30 minutes.
    Many thanks for your help!
    Best regards,
    Olivier

    Hello Guys,
    Thank you very much for your answer. Is there a way to close all JCO connections automaticaly from the abap or java stack or should I set a timeout for each JCO?
    Thanks in advance,
    Olivier

  • CFQUERY Timeout Parameter for SQL2005 Fails

    Here's my test:
    <cfquery name="test" datasource="dsn" timeout="1">
      select top 20000 *
      from table
    </cfquery>
    <cfoutput>#cfquery.ExecutionTime#</cfoutput>
    I'm getting 3000+ for this value.  This shouldn't be, right?  Because I have the timeout parameter set for a second?  The driver I'm using is the one that's
    supplied with CFMX7.02, "Microsoft SQL Server", hooked into a MS SQL Server 2005 Standard.  Why is CF ignoring the timeout parameter?

    Hi,
    Anyone? I saw many articles in Metalink regarding the tx_timeout parameter - also one which a customer is demanding an explanation and enhancement on the tx_timeout parameter. Come to think of it, when will it work? only for Exchange? (found some hints on this in metalink).
    But still, is there no other way to immediately know if the port has opened or not?
    I will try the following: http://www.oraclenerd.com/2008/11/javaplsql-port-scanner-ii.html , but still would prefer a PL/SQL solution though.
    Many Thanks,
    Henry Wu

  • OC4J - timeout parameter?

    Hello everybody;
    Right now I'm using a standalone version of OC4J v1.0.2.2 and I'm suffring from the lack of timeout parameter that can be set on the server. The old OC4J/Orion give up listetning always after 15 secs and there's no place to set it up.
    ... and my question is: was that somehow patched in 9.0.3.0.0? Is it possible to set that parameter in this version of Oracle container?
    If yes - I'll be really glad to get rid of my old OC4J :-)
    Thanx for any reply;
    Best regards;
    .a

    ... if that's the case. is it a way to influence it from inside my code?
    did anybody try that?
    thanx for any comments.
    .a

  • Don't understand Connector.open timeout parameter

    Is setting this timeout parameter = true same as using setSoTimeout(timeout) in java.net? I need to use read() method to read data from inputstream as a nonblocking operation by setting the max. time that allows the read() method to stay blocking. How can I implement this operation with MIDP without generating second thread?

    Hi
    you could go through file \javax\microedition\io\Connectot.java
    it says
    * An optional third parameter is a boolean flag that indicates
    * if the calling code can handle timeout exceptions. If this
    * flag is set, the protocol implementation may throw an
    * InterruptedIOException when it detects a timeout condition.
    * This flag is only a hint to the protocol handler, and it
    * does not guarantee that such exceptions will actually be thrown.
    * If this parameter is not set, no timeout exceptions will be
    * thrown. The timeout period is not specified in the open call
    * because this is protocol specific. Protocol implementors can
    * either hardwire an appropriate value or read them from an
    * external source such as the system properties.
    we can see they do not specify only open could throw
    InterruptedIOException though currently the function
    prototype means only open will throw checked exception
    InterruptedIOException.
    anyway timeout should be implemented
    interoperateing with protocol.java and native function.OK?

  • CSM: Sticky timeout parameter: difference between sticky group and vserver

    Hi,
    Concerning the example in the CSM manual about configuration of stickiness:
    What (or why) is exactly the difference between the timeout parameter (100 minutes):
    sticky 12 cookie foo timeout 100 AND the sticky 50 group 12 in the vserver.
    The timeout parameter is overruled in the vserver configuration. (100 -> 50)
    For what could this be usefull?
    Thank you!
    Kind regards,
    Wim
    This example shows how to configure a virtual server named barnett, associate it with the server farm
    named bosco, and configure a sticky connection with a duration of 50 minutes to sticky group 12:
    Router(config)# mod csm 2
    Router(config-module-csm)# sticky 12 cookie foo timeout 100
    Router(config-module-csm)# exit
    Router(config-module-csm)#
    Router(config-module-csm)# serverfarm bosco
    Router(config-slb-sfarm)# real 10.1.0.105
    Router(config-slb-real)# inservice
    Router(config-slb-real)# exit
    Router(config-slb-sfarm)#
    Router(config-slb-sfarm)# vserver barnett
    Router(config-slb-vserver)# virtual 10.1.0.85 tcp 80
    Router(config-slb-vserver)# serverfarm bosco
    Router(config-slb-vserver)# sticky 50 group 12
    Router(config-slb-vserver)# inservice
    Router(config-slb-vserver)# exit
    Router(config-module-csm)# end

    if you configure the group under a policy, there is no option for the timeout.
    This is why the option exist under the stick-group.
    In the vserver, you can overrid this timeout - so the timeout is per vserver.
    If you want the same timeout, just configure the same value.
    gdufour-cat6k-2(config-module-csm)#policy test1
    gdufour-cat6k-2(config-slb-policy)#sticky-group ?
    <1-255> sticky group ID
    gdufour-cat6k-2(config-slb-policy)#sticky-group 12 ?
    Gilles.

  • Display established connection timeout parameter for an ACE

    We are using an ACE Software version A2(3,5) and we try to diagnos a parameter map probleme.
    Is there a way to know what is the timeout parameter applied to an established connexion? The command "show conn address ip netmask mask detail" only show the elapse idle time.
    Thanks

    When one of our top management tries to access a particulat Dash Board in EP system for the first time in the morning
    he gets an error connection to partner timeout after 60 seconds
    He, he, he.... I wonder why thing like this always happen to the big chiefs...
    Anyhow... Does this happen to anyone else?... if not then it could be a name resolution issue... also check the exceptions on the proxy settings of IE.
    Regards
    Juan

  • Timeout parameter in SolMan-ChaRM

    Hi,
    I need to know the parameter which decides the timeout for tcode SM_CRM in SolMan 7.1
    the ABAP gui closes after about 5 mins of inactivity whereas the web browser of tcode SM_CRM remains open for long time(about 1 hour)
    What are the parameters which decide these timeouts for both ABAP gui as well as web browser in SolMan Charm System.
    The reason behind the need to know this is the java threads in our systems are all getting consumed resulting in JAVA stack getting crashed.
    We suspect the SM_CRM is the culprit as it remains open for long time and this tcode is being used widely in our project.
    OS : AIX
    DB : oracle
    -Ujjwal

    Assuming you are talking about the timeout value for the web interface, it is in the {installdir}/ocas/conf/ocwc.conf file. The parameter you want to change is ssn_timeout. I believe you will need to restart ocas to make it effective.

  • Timeout-Parameter for XMLA-Interface

    Hello everyone,
    i am searching for a parameter like icm/conn_timeout or icm/keep_alive_timeout which applies to the XMLA-Interface.
    I am sending MDX-Queries via the SAP BI Java SDK against our SAP-Server which sometimes result in "read timeouts".
    Increasing XmlaConnectionConstants.TIMEOUT doesn't help so i need a server-side parameter.
    icm/conn_timeout or icm/keep_alive_timeout (the values are in seconds, not milliseconds, am i right?) don't seem to work either, so there must be another parameter which applies to the XMLA-interface...

    hi
    Check this note 1044258.. it may help.
    in case if it is MDX Query then check the Tags below
    http://help.sap.com/saphelp_nw2004s/helpdata/EN/9f/9b8f3c855f0454e10000000a11405a/frameset.htm
    http://help.sap.com/saphelp_nw2004s/helpdata/EN/9f/9b8f3c855f0454e10000000a11405a/frameset.htm
    Hope it helps
    Santosh

Maybe you are looking for