Timer+counter

HI
I am trying to create a virtual timer+ counter,
I want the wave be counted in amount of time, for example 10 seconds.
Now I am trying two while loops.
one for timer, one for counter.
but it does not work.
Can anyone help me?
Thanks!
the attachment is the simple vi.
Solved!
Go to Solution.
Attachments:
timer+count.vi ‏288 KB

Thanks for reply
I found what I want.
the attachment is the vi.
Now I want to add one more feature to the simple timer+counter.
I want to repeat the counter as many times as I want and save the info to a table. For example, run the program 5 seconds 10 times. The program stops with 10 counts data shown in the table.
Could you please provide any suggestion how to make it?
Thanks
cynitha
Attachments:
Counter_Timer.vi ‏251 KB

Similar Messages

How to create a time counter without using Sleep()?

I want to create a time counter that would count from 120 minutes and down. I thought about using Sleep() but I have found out that Sleep() is not accurate (so maybe the countdown would take 122 minutes instead of 120 minutes!). What other alternatives do
I have?
Note that I want to count 1 second at a time, because I want to show the countdown progress to the user in seconds.

The next experiment still uses Sleep and waits for approximately 12 seconds, displaying the time each second. However it is probably too overcomplicated compared to time polling:
const
int SECONDS_TO_WAIT =
12;
ULARGE_INTEGER ul_end;
FILETIME ft;
GetSystemTimeAsFileTime( &ft );
ul_end.LowPart = ft.dwLowDateTime;
ul_end.HighPart = ft.dwHighDateTime;
ul_end.QuadPart += 10LL *
1000 *
1000 * SECONDS_TO_WAIT;
for( ;; )
FILETIME ft;
GetSystemTimeAsFileTime( &ft );
ULARGE_INTEGER ul;
ul.LowPart = ft.dwLowDateTime;
ul.HighPart = ft.dwHighDateTime;
if( ul.QuadPart >= ul_end.QuadPart )
break;
SYSTEMTIME st;
FileTimeToSystemTime( &ft, &st );
Sleep( 1000 - st.wMilliseconds );
GetSystemTime( &st );
if( st.wMilliseconds >
500 )
FILETIME ft;
SystemTimeToFileTime( &st, &ft );
ULARGE_INTEGER ul;
ul.LowPart = ft.dwLowDateTime;
ul.HighPart = ft.dwHighDateTime;
ul.QuadPart += 10LL *
1000 *
1000;
ft.dwLowDateTime = ul.LowPart;
ft.dwHighDateTime = ul.HighPart;
FileTimeToSystemTime( &ft, &st );
// show the time
SystemTimeToTzSpecificLocalTime( NULL, &st, &st );
printf( "%02i:%02i:%02i\n", st.wHour, st.wMinute, st.wSecond

How to add an "age / time counter" into DW?

Can anyone assist on how to add an age / time counter into DW?
In other words to say "Child X is now a years, b months old"? or "Product Z was launched A years B months ago"? Or, on the other hand, "You only have Z days & Y minutes left to enter"? With it updating in real time?
Apologies in advance if this is a silly / obvious question but I just can't seem to do it!

This isn't something you would add to DW, you would need to add it to your webpages. You would do this with javascript. Search the web for
'javascript countdown timer' for plenty of examples.

I need to play back a video-recording i have taken myself and have it show the time count in seconds on the play back. Can you help?

I need to play back a video-recording that I have taken myself and have it show the time counter in secs/minutes in the playback. Can anyone help?

the movie editing app "Avid Studio" displays a time counter, as does the Pinnacle editing app. Oddly enough, I movie does not. (unless I have it somehow turned off.)

USB 8451 no timer / counter ?

Hi all,
i´m not sure if i´m in the right topic now, but i found no answer with the search function.
I tried to generate an digital pulse using timer/counter functions with Labview 8.5 and an USB 8451, but it didn´t work.
Is it possible that the USB 8451 doesn´t support timer / counter signals?
Thanks for all your answer!

Hi AK2DM,
thanks for catching this one. I missed the important piece of information that the original poster would like to generate pulses. We have a KB-entry for this. You could also generate software-timed pulses with the 8451. The jitter (timing deviation), as you mentioned, could be a problem. The same issue arises with the 6501 I mentioned!
For generating pulse trains I would recommend a basic E or M series device such as the 6210 USB.
If you have further questions, don't hesitate to ask.
Best regards,
Peter
Peter A.
Field Sales Engineer, NI Germany

I always need to see the time counter on the music player, is that possible?

As a spinning instructor I need to see the time counter on the music player all the time. Now it dissepears after a short time and I need to touch it to see it again and that is not good! I also wish that it was bigger numbers on the counter so I easy can see how long time it's lest on the songs.
Ideas anyone?

By default the screen display will dim in about 20 seconds to conserve the battery. And I cannot find any setting to inhibit this function. I am afraid there is no way you can keep the screen bright and enlarge the numbers on the timer.

Can you add a time counter

I know you can view the project length in project info, but is there a way for the user to see a time count?
Most viewers have this feature.
Captivate 7

It is a pretty old post, but still valid: http://blog.lilybiri.com/display-time-information

How to synchronize two timer/counter tasks?

Hi,
I'm programming DAQmx through the nicaiu.dll with Matlab. I'm trying to start two different tasks, each controlling ctr0 and ctr1, respectively. Both timer/counter tasks should start on a common trigger, in my case /Dev/PFI0. Having searched the forum, I do understand that both tasks can't be triggered off PFI0. Instead, I probably need to trigger one of my tasks on a signal that turns on whenever the first task starts. My question is; What signal can inform my ctr1 task that my ctr0 has started? I basically want these two tasks synchronized, but not pulse by pulse since the pulse trains are quite different.
Trying to trigger both off PFI0 results in a resource conflict. Triggering ctr1 on ctr0gate doesnt work either.
Also, I need ctr1 to trigger on when the ctr0 tasks starts, i.e. not when the first ctr0 pulse appaers!
Thanks,
Per

Thanks Ryan.
I made some changes to my code now and it appears I CAN trigger both counters off PFIO (on an E-Series board). I only recently converted all my Traditional code into DAQmx, and got lost in my tracks. I was trying to generate finite pulse trains on both counters, and had used Finite timing on the counters to generate finite retriggerable pulse trains, without knowing that tied up the second counter. I solved this now using Pause Triggers instead. In the case where I generate single retriggerable pulses I still use a Start Trigger, and I can now Start BOTH counters using DAQmxCfgDigEdgeStartTrig and listening to PFIO with both counters (each counter running off a separate task).
Sorry, I got things confused, and your solution isnt required anymore. Similarly to your solution, though, I have always used a (real) analog output routed externally to the PFI0 pin on my E-Series board as the synchronizing trigger. However, if I could avoid the external wiring it would be nice, so I will explore your solution a bit more
I am not familiar with the concept of a 'dummy' task/channel. Can you point me to more documentation on this?
I already use the analog inputs on this board from another app. Will creating a dummy AI tie up all analog inputs, so I can't then access my physical analog inputs from other applications (on the same board)?
- Per

Solution for Accumulative time counter

Hi,
I am developing an online training web application in MVC framework,
i have to maintain a accumulated time counter for every user . for example 400 hrs a course means (00.00.00 to 200.35.45) (hr/minute/seconds) format .I will have to count for the entire session for every time user login.
first day: 00.00.00 to 02.35.45
second day :02.35.45 to 03.35.45
need solution.
Regards
gopi.

Convert to (milli)seconds and calculate it. There are no API's of use for you AFAIK.

How to create a time counter

Hello expertsl,
I have a new challenge on board.
I have a form that is automatically popped up. Now on the form, i need to insert a timer that as soon as it pops out, the timer starts and then i have to enter some data in the form and as soon as i press the save button, the timer records the time count and then stores it in a table.
Any suggestion are the most welcome...
Thank you

As Hoek said, this is not a Forms forum.
However, the problem is not really unique to Forms and a timer itself is not needed.
A timer is a kernel object that fires at specific intervals and each time around executes a callback routine. This allows one to update or process at specific intervals.
You do not need a timer as you are interested in time elapsed - which means that on the creation of the form you need to get the current time. When the save button is clicked you again get the current time. The data that you are interested in is the time difference between these two.
Remember that timers are expensive objects to create ito kernel resources. Some operating systems limit the total number of timers that can be created. In general, it is not a good idea to create a timer unless it is the best technical solution for the problem. And you do not need a timer determine a time elapse. You simply need code in the constructor of the form and code in the save events of the form. Nothing more.

A time counter for the whole project

Can you tell me is there any way to get the overall project time as a time counter in the playback controls? Or viewed somewhere on Captivate?
I need to know at which time a particular slide is appearing in a video. I can only find time duration per slide or one overall time for the project.

If you dont like the TOC, here you can find some other ideas:
http://blog.lilybiri.com/display-time-information

How do I overlay a timer counting down on a Keynote slide?

Hello!
I am searching for a way (app or otherwise) to have a timer counting down while in "full screen" mode in Keynote. I am an urban educator, and I've found it very effective in having a stunning image on the smartboard via Keynote, in order to focus engagement while the students enter my classroom. I would love to also have a timer overlayed on that slide somewhere (right hand corner likely) counting down - so students know how much time they have to socilize and become situated before class "officially" begins.
Appreciate any guidance!
Best
Biros

My brain got fried with all of the previous SWFLoader positioning and centering - so much that I had to stop and clear my head and then this became an easy case of putting the HGroup and the Logo inside a BorderContainer. I had inadvertently placed the Logo inside of HBox.

Accumulative time counter

Hi,
I am developing an online training web application in MVC framework,
i have to maintain a accumulated time counter for every user . for example 400 hrs a course means (00.00.00 to 200.35.45) (hr/minute/seconds) format .I will have to count for the entire session for every time user login.
first day: 00.00.00 to 02.35.45
second day :02.35.45 to 03.35.45
need solution.
Regards
gopi.

Convert to (milli)seconds and calculate it. There are no API's of use for you AFAIK.

Insert time counter

Hello,
Is there a way to insert a time counter in a sequence? Is there any effect or plug in for this? An idea, any body??

Piero, a regular poster to these boards, has free plugins in for both Timecode and Counter reader, they work quite well (tho so does the Timecode generator)
http://web.mac.com/piero.fiorani/iWeb/PieroF%20FCE%20Effect/FCE%20Counter%20Disp lay.html

Time counter in iMove

Hello there!
I just imported a 1-hour video in iMovie which I want to extract a number of clips from. I've written on paper what times these clips take place (ex. 14:30 to 14:55). Now that I have the big 1-hour movie in the Event Browser, I can't seem to be able to see what time it is when I put down the mouse arrow. I can skim the various parts of the movie in the Event Browser by just passing the arrow above it, but how do I know where into the movie I am (timewise)? I can't see a time counter anywhere, not in the Event Browser, OR in the Project Window.
Could it be possible that Apple left such an essential tool out?? I'd rather think I didn't abilitate it or something...
Thanks for any help you can provide!!
Z
Message was edited by: zurdyo
Message was edited by: zurdyo

Was there ever an answer given to how one can see on the edited version of the iMovie the amount of time you are into the program? If you want to mix music in Garage Band and then import into iMovie, you really need to know this. I just wondered if there was some info that may not have been passed along or if this question has everyone stumped.

Mini player time counter - count from beginning of song

ITunes 11.3 lost part of the time counter on the mini player. It shows how much time is left in the song, but it doesn't show how much time into the song you are (time from the beginning). I use ITunes to choreograph my Indoor cycling classes and it's important for me to see how far into a song certain changes in the routine will occur. It's also important to have this feature in the mini player as opposed to having to switch to the full player. Please put this feature back!

Hello there,
You're in the forum for Acrobat.com. We can't help with questions about other products; I'm not sure what you're using for your project, but it's not likely you'll find the help you're looking for in this particular forum. Sorry!
Rebecca

Timer+counter

Similar Messages

Maybe you are looking for