Title has too much black time

When I add a title to the movie, the title scrolls by very fast and then I have a number of seconds of black before my movie begins. I have tried to alter the speed and the pause, but I can't change the length of time the black stays on the screen. Any Ideas?

Click on the title clip that you have placed in the timeline to highlight it and then set the playhead where you want to edit out the black bit. Under Edit, click on Split Videoclip at Playhead. Then click on the unwanted clip to highlight it and hit delete.

Similar Messages

When i execute code, it shows "Record 1/?" and takes too much of time to execute.

Hi all,
I have s form with push_button (SEND TO BACKUP).
For this push button - SEND TO BACKUP, i have coded the below for Trigger - WHEN BUTTON PRESSED.
DECLARE
CNT NUMBER;
TEMPDATE DATE;
CURSOR C1 IS SELECT MAT_DESC, FRAME, FSIZE,    POLES, NUMS, DRG_NO,    RM_WT, FIN_WT, RATE,    FRAMENAME, FTYPE, CHND_DATE,RATESOFPO
FROM RMC_INACTIVE_MAT_RATES_MP;
BEGIN
FOR I IN C1 LOOP
   SELECT COUNT(CHND_DATE) INTO CNT FROM RMC_INACTIVE_MAT_RATES_MP_PREV WHERE CHND_DATE=I.CHND_DATE;
IF CNT > 1 or cnt=1 THEN
   MESSAGE('INACTIVE MATERIAL RATES FOR MEGAPACK ALREADY EXIST IN BACKUP WITH THIS DATE ');
MESSAGE(' ');
Raise Form_Trigger_Failure;
end if;
end loop;
FOR I IN C1 LOOP
INSERT INTO RMC_INACTIVE_MAT_RATES_MP_prev(MAT_DESC, FRAME, FSIZE, POLES, NUMS, DRG_NO,    RM_WT, FIN_WT, RATE,    FRAMENAME, FTYPE, CHND_DATE,
RATESOFPO )
VALUES(I.MAT_DESC, I.FRAME, I.FSIZE, I.POLES, I.NUMS, I.DRG_NO,    I.RM_WT, I.FIN_WT, I.RATE,    I.FRAMENAME, I.FTYPE, I.CHND_DATE,I.RATESOFPO );
END LOOP;
COMMIT ;
MESSAGE('DATA HAS SENT SUCCESSFULLY ');
MESSAGE(' ',NO_ACKNOWLEDGE);
END;
It is working but with lot of delay, it takes too much of time.
After i run this form & as i press the button, it shows "Record 1/?" in the below and it takes almost 5 mins to execute completely and dhow the message.
Can you tell why is it showing "Record 1/?" below ???
How to reduce the delay??
Thank You.
Oracle9i Enterprise Edition Release 9.2.0.1.0 - Production

If you want to suppress the message shown in status you can set the sevearity like :system.message_level          := '20';
Can you change your code like
:system.message_level          := '20'; --- To suppress the default messages
DECLARE
CNT NUMBER;
TEMPDATE DATE;
CURSOR C1 IS SELECT MAT_DESC, FRAME, FSIZE,    POLES, NUMS, DRG_NO,    RM_WT, FIN_WT, RATE,    FRAMENAME, FTYPE, CHND_DATE,RATESOFPO
FROM RMC_INACTIVE_MAT_RATES_MP;
BEGIN
FOR I IN C1 LOOP
   SELECT COUNT(CHND_DATE) INTO CNT FROM RMC_INACTIVE_MAT_RATES_MP_PREV WHERE CHND_DATE=I.CHND_DATE;
IF cnt >= 1 THEN
   MESSAGE('INACTIVE MATERIAL RATES FOR MEGAPACK ALREADY EXIST IN BACKUP WITH THIS DATE ');
MESSAGE(' ');
Raise Form_Trigger_Failure;
end if;
end loop;
FOR I IN C1 LOOP
INSERT INTO RMC_INACTIVE_MAT_RATES_MP_prev(MAT_DESC, FRAME, FSIZE, POLES, NUMS, DRG_NO,    RM_WT, FIN_WT, RATE,    FRAMENAME, FTYPE, CHND_DATE,
RATESOFPO )
VALUES(I.MAT_DESC, I.FRAME, I.FSIZE, I.POLES, I.NUMS, I.DRG_NO,    I.RM_WT, I.FIN_WT, I.RATE,    I.FRAMENAME, I.FTYPE, I.CHND_DATE,I.RATESOFPO );
END LOOP;
COMMIT ;
MESSAGE('DATA HAS SENT SUCCESSFULLY ');
MESSAGE(' ',NO_ACKNOWLEDGE);
END;

Photshop Elements 9 Interface has too much contrast

Hi. I like the new version 9. But I don't like the interface. Why did they change it. It was great in Photoshop Elements 7. And they even had a option to adjust the appearance option. Not now though. To me it has too much contrast. Why did they have to leave out that option. The new interface is too bright and too dark. Oh well. I guess I will have to get use to it. I wish CS4 had a interface like Photoshop 7. Here's a screenshot of Photoshop 7.

Hi. I will get the new version. But I just wish it could have the option to change the interface like Elements 7. The best looking version in my opinion. They should have made CS5 look like Elements 7 too. Black interface is the new thing. Not dull dingy gray like CS5 is. It looks like the Windows XP classic themes. Boring. I like subtle black like beautiful Elements 7.

Apple mobile device service uses too much cpu time

Apple mobile device service uses too much cpu time, from 88% to 99% of the CPU time.

The best way to fix this is to completely remove all aspects of iTunes then reinstall. Step by step directions are on this article. Good luck
http://support.apple.com/kb/HT1925?viewlocale=en_US

When I print a Word document to a shared printer, print preview looks fine but the printed page has too much blank space at the top and doesn't print the bottom few lines.

When I print a Word for Mac document to a shared printer (that is connected to my iMac) from my Macbook Pro, print preview looks fine but the printed page has too much blank space at the top and doesn't print the bottom few lines. I have tried to adjust the margins and the page setup settings but to no avail. It used to print fine until recently. Is there a way to fix it so that the printer prints what print preview shows?

I should add that when I e-mail this document to myself and print it directky from the iMac, it prints fine.

How to tune the query..."sum" operation is taking too much long time...

how to reduce the execution time for the below query..."sum" operation is taking too much long time....
SELECT
B.DP_AVPS_STATUS,
SUM(DP_AD_CURR_BAL*D.ISIN_CLOSE_PRICE) Qty,
B.DP_NET_WORTH,
B.CMN_DP_FLAG,
B.RESTRAIN_TYPE ,
B.LETT_GENR_DATE,
E.MAX_NET_WORTH,
E.MIN_NET_WORTH
FROM DPMADV0 A, PABRNCHDTLP0 B, PABANKCCYP0 D,PADPNETWORTHDTLP0 E,
(SELECT CID_NUMB FROM CFCUSTMASTD0
WHERE SUB_TYPE NOT IN (1,2,5,6,7,28,29,30,31,40,41,48,49,50,57,83)) C
WHERE A.DP_AD_BR_NBR = B.BRNCH_NUMB
AND A.DP_AD_CCY_CDE = D.CCY_ALPHA_CODE
AND A.DP_AD_ACCT_NBR = C.CID_NUMB
AND E.DP_ACCOUNT_TYPE = B.DP_ACCOUNT_TYPE
AND SUBSTR(B.BRNCH_NUMB,1,3) like SUBSTR(:hvBrnchNumb,1,3)
AND ((B.DP_TYPE IN (2) AND B.DP_ACCOUNT_TYPE IN (10, 11)) or
(B.DP_TYPE IN (3) and B.DP_ACCOUNT_TYPE=11 ) )
AND B.DEL_FLAG = 'N'
AND B.DP_STATUS = 'A'
AND D.ISIN_STATUS = 'A'
GROUP BY B.DP_NET_WORTH,B.RESTRAIN_TYPE,B.DP_AVPS_STATUS,E.MAX_NET_WORTH,
E.MIN_NET_WORTH,B.CMN_DP_FLAG,B.LETT_GENR_DATE;

Hi,
please produce a plan with rowsource statistics (if not sure how, follow instructions in http://savvinov.com/2012/09/24/a-sqlplus-script-for-diagnosing-poor-sql-plans/) and post it using tags to preserve formatting.
Best regards,
Nikolay
P.S. I also suggest that you work on your open threads:
Handle:      946903
Status Level:      Newbie
Registered:      Jul 16, 2012
Total Posts:      11
Total Questions:      5 (5 unresolved)

How to uninstall Mcafee anti-virus from my machine because of machine bootup is taking too much of time for usage?

Hi,
How to uninstall Mcafee anti-virus from my machine because of machine bootup is taking too much of time for usage? so that i moved all mcafee related file to trash but while machine boot up mcafee showing and asking Authentication so any one give me better suggestion on this.
Thanks in advance,
Suresh Balakrishnan

Hi All,
i uninstalled AV successfully using as below mentioned links:
Moved to VirusScan Other where hopefully an expert can help you.
Until they do I Googled 'How to uninstall VirusScan 8.6 for MAC' and got this as one of the many choices: https://kc.mcafee.com/corporate/index?page=content&id=KB54975
There are also uninstall instructions in the User Guide: https://kc.mcafee.com/resources/sites/MCAFEE/content/live/PRODUCT_DOCUMENTATION/ 22000/PD22134/en_US/VirusScan%20for%20Mac%208.6.1%20User%20Guide%20Addendum.pdf
By condemning files to the bin you may have scotched any automated method of removal but I will defer to the experts on that.
Thanks lot,
Suresh Balakrishann

My messages app won't open, after I sent a large iMessage. I think it just has too much data on it. What can I do other then reset my iPhone?

My messages app won't open, after I sent a large iMessage. I think it just has too much data on it. What can I do other then reset my iPhone?

Hi everyone, I had this problem but none of the solutions above worked. What happened with me, and with others in other forums, is that a particular thread or message was causing the problem. I'd go to open the message and all I'd get was a white screen with the blue bar at the top. So, I went into contacts, pressed 'send message' to a contact whose message wasn't causing the problem, then I pressed back to messages. You then swipe to the left on the thread that's causing the problem, and delete it. Sadly this means you will lose all that person's messages, but you can try opening it from there and deleting it on the thread. Didn't work for me though. Hope that helps! It was the only thing that worked for me after about three days of total frustration and resetting!

Titles have way too much blank time in them

After the latest update to iMovie HD 6.0.3, the titles started behaving badly. More than half of the title is just black time. It starts out normally, but before it gets half way thru the title, it fades to black. I never had this problem before. Titles already in a movie work properly, but to add a new title I have to make it very long and then trim off the blank part. Does anyone else have this problem? Any solutions?

After an update it is good to close down all programs and do a permissions repair from the Utilities/Disk Utility app on your Mac. So do that if you have not already done so. After that, and before opening iMovie, trash the file com.Apple.iMovie.plist found in User/Library/Preferences. While you are at it, trash the FontCollections file (NOT the Font Book) found in User/Library. iMovie will replace the latter two files upon relaunch. Then update your iLife programs to current version, specially Quicktime. Make sure you have enough disk space for iMovie to operate -- 10 GB should be safe. Finally, if you are storing your project on an external drive, make sure it is formatted for Apple. Should be Mac OS extended or Max OS extended (journaled). But if you reformat, remember that reformatting will erase all data on the drive.
The above are easy to do and should get you up and going again. The permissions repair and trashing the .plist file might be enough. But if not, keep going down the list.

HP Photosmart A616- Photo printing colour has too much blue tone

Hi,
I have a HP A616 photosmart. It was purchased a while ago, as well as the ink cartiage. Recently when I set it up to try on the printing quality, I realsed all photos that I printed contain too much of blue tone in them. I can still see the different colour in each photo but they are covered by a layer of blue colour on them. I didn't chose black& white or other colour function. Just the normal printing quality.
Has anyone experience the same with this device? Or any soloution or what way go wrong?
I was thinking could it be due to the ink cartiage used? It was stored for almost a year before I took it out to use.. will storing ink cartiage for a long period of time could damage the ink???
Thanks for anyone who can reply to this query.
SL

Hi Matt
Are the ink levels ok? You could try checking the cartridges are vented properly. More details in the link below
http://h10025.www1.hp.com/ewfrf/wc/document?docname=c02142902&cc=us&lc=en&dlc=en&product=4021935&tmp...
Please let me know how you get on
Thanks, Ciara
Although I am an HP employee, I am speaking for myself and not for HP.
Twitter: @Ciara_B_HP

Taking too much of time in po change mode

Dear all
please let me know that whay system taking too much time in p.o. change mode and when p.o. in change mode while clicking the condition tab it takes lot of time to open
regrds
s.m.pandit

Hi Pandit,
Tell us more about your situation. What version of SAP you use and recently have applied any patch to your system? Also have look at t.code ST03N to analyze the performance of your system.
Regards
Melih

C100 has too much green in the video, doesnt disappear when adding magenta

So last night I was just doing some testing with the c100 and I noticed that in the viewfinder after auto white balancing, there ws a bit too much green in spots where there relly shouldnt be. I took some video and wanted to see if this was just something in the LCD screen or the actual video, and the green cast was indeed in the video. I went into the color profiles and tried adding magenta but it actually did nothing to reduce the green in the areas I was seeing it in and only made everything else more magenta.
I'm just wondering if this is a known issue or if anyone has experienced this and if there;s any real fixes.

Hi JerTob,
We are sorry to hear that you are still having issues with the color casts. I suspect that this has a lot to do with the color temperature of the lighting that you are shooting in. What you have shown us is indoors, it's hard to make a distinct determination on the lighting because you could have any number of temperature bulbs in the mix. This type of mixture of lighting can have distinct effects on the color casts you see in the final image. This is especially true if shooting with household bulbs in an overhead or something to that effect.
What I would suggest would be to shoot outdoors, with the camera calibrated for such, and see if the same effect occurs. Lighting indoors can be very tricky and most videographers shooting in a professional environment use specialized lighting to correct for such casts and work with a colorist in post production to correct for exacting color.
Did this answer your question? Please click the Accept as Solution button so that others may find the answer as well.

IMovie HD - Trouble! Video is skipping like it has too much information??

On my current iMovie HD project, the Video portion of the playback is skipping during the last song I am working on. It's almost like there is too much information during that song, but I have not added transitions, sound effects, etc to the clips.
I have tried deleting song and adding a different song, same problem. The other 30 minutes of the movie play perfectly.
Wowsers. Any help would sure be appreciated. Thanks.

Thank you Jason for responding so quickly. I clear the auto-linking and do my own linking between tables. As you said, "there's nothing smart about CR's smart links".
And I was referring to Microsoft SQL Server 2005 version 9.0.3073. The problem I initially had was linking CR to the server. Thankfully I had a lot of help from the linking forum that helped me with it. I'm running Windows 7 and it appears the operating software has two ODBC one is 32 and the other 64. In the ODBC Data Source Administrator the user DSN is set to the SQL Server.
Back to this problem. Trying to figure out the double item numbers and I have tested it with only that one particular table and did not link it to another. I also have tried it with linking it to other tables to see if somehow that could put a restriction on the information. The parameters really doesn't work here unless I'm setting it up incorrectly. Nor does the Select Expert really do what I need it to do. The options I can choose from: Itemnumber: is any value, is equal to, is not equal to, is one of... nothing gives me the option to say only choose the child if the child was purchased. And I'm not advance enough to figure out a script to do it.
Per sales order (I have the report to group by the sale order number) I need it to list the correct item that was purchased by the customer. The report pulls into the detail section of the report the parent and child item number when only the child item was ordered and not the parent.
I have a feeling you are correct in saying
Don thank you very much for the registry edit. It has saved me a step in creating new reports.
Thank you both again,
Cindy W.

Too much memory & Time used during data save.

The attached code is designed to run in a system with:
1) a 6528 isolated DIO card with a hardware watchdog AND
2) a 6221 DAQ card. Among other things.
The real program runs two machines, acquiring data from both and
monitoring the output comands to both. Periodically both machines save
a data history. Since it takes some time to format the data, machine 1
will "snapshot" its data and inform machine 2 that it has done so.
When machine 2 gets to a point in its operation where it can tolerate a
long interruption, it signals the "data manager" that it's safe to save
the snapshot to disk. At that time, the watchdog is reset to allow a
much longer timeout, the waveform data is appended, the command data
interleaved, and the whole batch saved. After that, the data monitors
are reinitialized and the watchdog set to a normal interval. If
necessary, the DAQ resets as well.
Interleaving the data is required because the DAQ runs at 200Hz and the commands are updated at ~50Hz (nominally).
If you don't have the cards in your system, this test has been designed
to run with a simulator. The data isn't pretty because most of the
control system isn't here, but it works.
The problem is that sucessive data saves tend to take longer and
longer. Sometimes the OS (W2k) complains it's out of memory and shuts
LabVIEW down. I think there's a memory leak somewhere, but it's not
consistent. It also seems to work differently on WxP. WxP complains
about increasing the page size of virtual memory. Troubleshooting so
far shows most of the time is being used in state "Format WF". In the
real system, without simulating, the operation can take from 4-5
seconds to over 2 minutes. The ERA section seems to have more trouble
than HA, although state "Format WF" is the same for both.
Anyone care to comment?

Test Data Save 1.vi
I saved the ZIP file to preserve the folder structure.
I think you will also need the attached text file in the same folder as BCU Sim Config 8.vi
This post is now mostly of academic interest. I've solved, or at least worked around the problem by saving 4 data files fo "ER" and 3 for "HA." I will write another VI to join the files later. The newer VIs still take 3-5 mS to run (accumulate), which is marginal for the application. I don't see how they can be made faster though. The cycle rate could probably be lowered, and the data rate taken to 100Hz, but I'm fighting response time and some noise filtering issues too. Higher sample / cycle rates help.
I've got a test program that will run all weekend trying to fill up a hard drive. If it survives then I'll call it good to install in the real program.
Attachments:
HA History (no ARINC) to File 3.vi ‏179 KB
BCU_Sim_Init.txt ‏3 KB
ERA History (no ARINC) to File 7.vi ‏222 KB

My screen has too much contrast

There is something wrong with my screen and it is hard to describe. The contrast or brightness is off and I have tried callibrating it using the color calibrator at least 100 times and it does not change it. When i turn my computer on, for the first 5 seconds or so it has normal color but then it goes back to this messed up brightness or something and i just need it to go back to normal somehow. Is there any way i can just go to restore default settings or something? Anything will help.

Just had to reply as well. I had the exact same problem as Jenny after my 16-month old son got ahold of the keyboard. It was driving me crazy! Your fix solved it right away. Thank you sooo much.

Title has too much black time

Similar Messages

Maybe you are looking for