TM - Missing entry in ta20c after upgrade to ECC6.0

Hi
We are preparing an upgrade from R/3 4.6C to ECC 6.0 and I am currentliy evaluating Travel Management. In TRIP, when I choose "Create Travel Request", I get an error that "No entry in table TA20C for argument 01".
I have checked the table, and it contains only one entry with values only in MANDT and USER_TEXT.
I haven't worked in TM before, and I have no clue where to look in the IMG.
Can you please help?

Found it - it was looking for an entry in "Travel service categories" with grouping "01", and ours was blank

Similar Messages

Paym.guar.proc. Field is Disable after Upgrade to ECC6

Hi All,
Would like to have your guide and opinion which Paym.guar.proc. Field is Disable after Upgrade to ECC6.
Thank you in advance.

Hi Lakshmipathi,
As per checked, only SO to DO document created only.
We have implemented below change Note : 1736052 with change of SAPMV50A2112, I/O field LIKP-ABSSC from output field to input field that was working fine.
Please let us know you have any feedback on it.
1736052 - Entering the payment guarantee procedure in delivery note
Trevor Wong.

After upgradation to ECC6.0 two fields in report not showing

Hi,
While running Z report Vendor and Material Description is not appearing.This problem is faced after upgradation to ECC6.0.In 4.6C it was showing in detailed. Is there any reports for settlement document having material & vendor code with description.
Regards
Nitin A

Hi Mohamed,
Thanks a lot for your immidiate reply.
Is there any reports for settlement document having material & vendor code with description.
Regards
Nitin

Missing entry point kglttr after 8.1.7.0 to 8.1.7.4 upgrade

Hi,
After upgrading from 8.1.7.0 to 8.1.7.4 on Windows 2000 server, when I try to start the Oracle service for a SID, I get an error message that the procedure entry point kglttr cannot be found in orageneric8.dll.
The installation was done using a silent install. The user id had full administration rights. The silentInstall.log file indicated a successful completion of the installation. The server was rebooted after the installation.
Any suggestions? I've got a customer site where I need to do this ASAP, and I can't turn the process over to them until I get this fixed...
Thanks,
Garth

Why?To fix some bugs and to enhance your performance
How?Download the 8.1.7.4 patchset from metalink
Regards
Laurent

Entries in table CDHDR for transaction MM02 missing after upgrade to ECC6.0

Hi,
I am supporting a client who has just performed an upgrade from 4.7 to ECC6.0 on their test system. We try and use transaction MM04 (display material master changes) or MM02 and view changes to the material master but there are no entries.
During the upgrade, the entries for transaction code MM02 in table CDHDR have been lost. Can anybody give me assistance on how to avoid this when performing the production upgrade, or even better, is there any way to get these entries back?
Thank you.
Sharon.

That shouldn't happen - entries shouldn't get lost.
Is there anything in the CDHDR table (by browsing it with SE16)? If not, then something went wrong during the upgrade....
Have there been modifications to the table? Is the the table active in SE11?
Markus

Voice memo missing on iphone 4s after upgrade to ios 7

voice memo app is missing on my iphone 4s after upgrading to ios 7. any ideas?

Miracle!!!!!!
The iOS 7.1 update solved the WIFI issues on my iphone.
I'll try to upgrade my ipad later on and then
I think I can sell my hairdryer and my freezer.
Thanks to the people @ infinite loop ;-)

Missing entrys in SPRO after upgrade to FS-RI 6.60

Hi,
We've upgraded FS-RI 472 to 6.60 fp4. (R/3 470 to ERP 60 EHP 4)
Refering to the Release notes there should be some new entries under "Accounting", "Settings for Time Period".
There should be "Edit Financial Years", "Open and Close Accounting Periods". We only have "Edit Scope of Accounting Period".
Anyone have any idea? I guess I've missed some step in the upgrade.

Randy,
Looks like you need to add more space to /tmp directory as I see the following entries in CLONE*.error file.
CLONE2013-12-28_12-41-01PM.error:
=================================
SEVERE : Dec 28, 2013 12:42:46 PM - ERROR - CLONE-20275   Insufficient space to create /tmp/CLONINGCLIENT8522798570339051663.
SEVERE : Dec 28, 2013 12:42:46 PM - CAUSE - CLONE-20275   Minimum required space was at least "1,798" MB, but only "1,737" MB was available for use.
SEVERE : Dec 28, 2013 12:42:46 PM - ACTION - CLONE-20275   Make sure that the minimum required space is available for use.
SEVERE : Dec 28, 2013 12:42:46 PM - ERROR - CLONE-20233   Restoring Middleware home for sourceid "mwhome1@FMW_Home" has failed.
SEVERE : Dec 28, 2013 12:42:46 PM - CAUSE - CLONE-20233   An internal operation failed.
Thanks,
Hussein

Missing files - corrupt library after upgrade to 11.1.4

I updated iTunes to 11.1.4, and after launching, it looked like it was updating my library as it's done in the past. However, this time, after an hour I realized it had not yet completed, and a dialogue box asking about creating an iTunes U playlist was on the screen. I tried to do so, but it just kept repeating. So finally I stopped it, and now I have an file marked iTunes library (damaged) and an incomplete library. I am missing thousands of songs compared to the last .itl I have in Previous iTunes Libraries.
I thought when iTunes did an upgrade to the library it was supposed to make a backup? If so, and I did the upgrade yesterday, why is the most recent file in Previous iTunes Libraries dated from four months ago?
How can I repair the damaged .itl file, as the one iTunes is using now as, as I mentioned, missing thousands of songs now.
Is there any sort of script or utility I can use to figure out exactly which files are missing from the current .itl in my library?
Thanks in advance.

I thought when iTunes did an upgrade to the library it was supposed to make a backup? If so, and I did the upgrade yesterday, why is the most recent file in Previous iTunes Libraries dated from four months ago?
No, you need to do the backup as part of regular computer maintenance and before you do any software upgrades. iTunes moves the old library into the previous library area but perhaps your update failed before it did that.
How can I repair the damaged .itl file, as the one iTunes is using now as, as I mentioned, missing thousands of songs now.
https://discussions.apple.com/message/20401436 - turingtest2 11/2012 post on rebuilding empty/corrupt library after upgrade/crash from previous iTunes library file.
iTunes: How to re-create your iTunes library and playlists - http://support.apple.com/kb/ht1451
Is there any sort of script or utility I can use to figure out exactly which files are missing from the current .itl in my library?
Yes, there's one on the Dougscripts web site that will crawl through a library. In yur case it's probably just as easy to drag the whole iTunes media folder to Automatically Add to iTunes. Anything already in the library it will ignore. Anything not there it will add.

Drivers missing for Envy 6 after upgrade to windows 8

There are a few missing drivers shown on the device manager after Upgrade to windows 8 for model: Envy 6-1006TX.
The four items are:-
1. PCI Device
2. PCI Simple Communications Controller
3. Unknown device
4. Unknown device
I try to find it on the support and download page on the product support but could not find.
i even go to HP Support Assistant website to try download the support assistant for window 8, but the links is not working.
Can anyone assist ? Thanks

Enter the Device Manager in Windows 8 by holding the Windows key and tapping the x key once. In the menu that is invoked, select the Device Manager. Right-click on the unknown device and then select the details tab. See the following image. I arbitrarily selected a device as an example.
Post the image by using the snipping tool. The snipping tool can be found by using the Windows key + x and selecting search. Type in "snipping" and the snipping tool link will appear for you to click on it and use as in the following image.
Post all that is before the &SUBSYS in the top PCI\VEN alphanumeric string and I can use it to see if the manufacturer of the device has posted a Windows 8 driver. Sometimes the success rate for finding a driver is greater at the manufacturer website.
****Please click on Accept As Solution if a suggestion solves your problem. It helps others facing the same problem to find a solution easily****
2015 Microsoft MVP - Windows Experience Consumer

You Tube App Missing on iPad 2 After Upgrade to iOS 5

I have an iPad 2 that I purchased from a US Apple store in May 2011. After upgrading to iOS 5 the You Tube app is missing. How can I reinstall it?

That is one of the standard apps that is not deletable. So it is probably there somewhere.
Check setting, general, restrictions, and make sure you didnt turn that on by accident.
Then goto the searchlight screen, and type in you tube, and if the app is on the pad, it will find it.
If restrictions are not on, and if searchlight does not find the app, do a full reboot,
If still no joy, do a restore from backup.
But check restrictions first.

Personal hotspot missing on iphne 4 after upgrading to IOS 5

Since i upgraded my iphone 4 to IOS 5, the personal hotspot disappeared on the settings.
can anybody help me how to fix this.

Apple has not been forthcoming on the explanation. My Siri worked on my iphone4 (not 4s) immediately after upgrading to IOS5, but I take it they have redirected the servers that used to support Siri to only work with Iphone4s.
It is one thing for apple to only bundle the improved Siri with IPhone 4S, or for them to remove Siri from the Ap store.
But it is another thing all together for apple to purchase a company, and then cease the service that many of us paid for.
Attempts to contact apple at apple store and via email have been unhelpful.
Apple Fan--

Mini Bridge Missing from InDesign CS6 after Upgrade to InDesign Version 8.1

I discussed this same problem https://forums.adobe.com/message/5833991 after upgrading to the prior version 8.0.2 of InDesign.
After upgrading to InDesign Version 8.1, Mini Bridge no longer works. Mini Bridge does not show under the Window menu and shift-clicking the Bridge icon opens the full Bridge, not Mini Bridge.
With the prior version 8.0.2 problem, I was able to recover Mini Bridge by doing a re-install of InDesign under Window's Safe Mode. Microsoft has somehow changed Safe Mode and I can no longer do the reinstall using Safe Mode. I have tried several different ways of reinstalling version 8.1, but none of them correct this problem. Still no Mini Bridge.
Mini Bridge does work in Photoshop CS6 with no problem.
I have read through all of the messages that seem to relate to this problem in this forum, but none of the suggested solutions work for me.
Can anyone provide me with an answer? If not, how do I get help from Adobe? I am willing to pay for support, if necessary.

RESOLVED - I can't believe it, but I have actually figured this out.
Getting frustrated with going in circles, I decided to dig into security options. First off, I opened Windows' Properties for the start-up icon for InDesign. Right off, I noticed under the Compatibility tab that InDesign was set to run in Compatibility Mode for Windows XP (Service Pack 3). This did not seem right, so I turned off the option to run in Compatibility Mode and re-started up InDesign. Low and behold, the option Window | Mini Bridge was now displayed! And it worked!
Sorry to have bothered you gentlemen with this problem. I really appreciate your assistance!
Mark.

Adding Custom Labels Missing for Contact Numbers After Upgrading to iOS 8.0 and issue still exists on iOS 8.1

I noticed that after upgrading to iOS 8.0 on my iPhone 5s, adding custom labels for contact numbers got removed. It still exists on iOS 8.1 as well. Is there someone who is facing a similar issue or can someone help me how to get that back. Any suggestions would be greatly appreciated.
Thank you.

Hi Yugendra,
Thanks for visiting Apple Support Communities.
I have good news. You can still choose a custom label in Contacts on iOS 8. The option should be below "Other" in the list of labels when editing a contact. This information is found in the iOS 8 user guide:
Contacts at a glance - iPhone
Change a label. If a field has the wrong label, such as Home instead of Work, tap Edit. Then tap the label and choose one from the list, or tap Add Custom Label to create one of your own.
Best Regards,
Jeremy

Idocs failing after upgrade to ecc6

Hi Experts,
we upgrade the system to ECC6, before the idoc to idoc scenario was workinf fine, but after upgrade we are getting error in we02 with Function Module Not Allowed
Can any one help what was the wrong???
Kind Regards,
Praveen

Praveen,
Check out the message code and corresponding processing code in partner function(TC:WE20). Go to transaction WE57 and check for function module entry against your idoc basic type ( & Extension - if it is extended idoc) / message type. I think entry is missing here.
Thanks,
Nilesh

IDOC Syntax Error E0072 with status 26 after upgrade to ECC6.0

Hi
We have upgraded SAP R/3 from 4.6C to ECC6.0. After upgrade, when we create PO and output EDI, we are seeing this IDOC syntax error E0072 for Mandatory Segment E1EDK01. In 4.6C it was working fine with no issues, only after upgrade this problem started. It says E1EDK01 is missing which is mandatory. We are using basic type ORDERS01 with no extensions. When we see WE30 it looks fine, WE20 settings looks fine.
Order of the segments got scrambled in upgraded version. First segment is E1EDP19001, this is supposed to be under E1EDP01 segment. There are two E1EDP19001 segments created but there were no sub segments to E1EDP01.
Any help in this regard is highly appreciated.
Thanks
Pandiri

User Exit activation and fixing the issue in user exit fixed this issue.

TM - Missing entry in ta20c after upgrade to ECC6.0

Similar Messages

Maybe you are looking for