TNS-12560: TNS:protocol adapter error and TNS-00530: Protocol adapter error

i just installed oracle 11g on my windows xp professional box. Which user and password shall i use. What username and password should i be using to login to sql plus?
when i use "Scott" "Tiger" it gives me ORA-12560: TNS:protocol adapter error occurred errorwhen i try to start service i get
LSNRCTL> start
Starting tnslsnr: please wait...
Failed to open service <OracleOraDb11g_home1TNSListener>, error 1060.
Failed to start service, error 203.
TNS-12560: TNS:protocol adapter error
TNS-00530: Protocol adapter error
I am accessing the database from the same machine. Also do I need to have a ORACLE_HOME for getting sql plus working or it is not necessary?

Starting tnslsnr: please wait...
TNSLSNR for 32-bit Windows: Version 11.1.0.6.0 - Production
System parameter file is D:\Apps\db\oracle11g\network\admin\listener.ora
Log messages written to d:\app\computeruser\diag\tnslsnr\computer2\listener\alert\
log.xml
Listening on: (DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=computer2)(PORT=1521)
Listening on: (DESCRIPTION=(ADDRESS=(PROTOCOL=ipc)(PIPENAME=\\.\pipe\EXTPROC1521
ipc)))
Connecting to (DESCRIPTION=(ADDRESS=(PROTOCOL=TCP)(HOST=computer2)(PORT=1521)
STATUS of the LISTENER
Alias LISTENER
Version TNSLSNR for 32-bit Windows: Version 11.1.0.6.0 - Produ
ction
Start Date 13-DEC-2008 21:47:48
Uptime 0 days 0 hr. 0 min. 5 sec
Trace Level off
Security ON: Local OS Authentication
SNMP OFF
Listener Parameter File D:\Apps\db\oracle11g\network\admin\listener.ora
Listener Log File d:\app\computeruser\diag\tnslsnr\computer2\listener\aler
t\log.xml
Listening Endpoints Summary...
(DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=computer22)(PORT=1521)))
(DESCRIPTION=(ADDRESS=(PROTOCOL=ipc)(PIPENAME=\\.\pipe\EXTPROC1521ipc)))
The listener supports no services
The command completed successfully
D:\>
Edited by: user9938780 on Dec 13, 2008 9:52 PM
Edited by: user9938780 on Dec 13, 2008 9:52 PM
Edited by: user9938780 on Dec 13, 2008 9:53 PM
Edited by: user9938780 on Dec 13, 2008 9:53 PM

Similar Messages

When was unloading creative cloud came an announcement that Rhodesia that had an error and could not download the error code was 50 which means

when was unloading creative cloud came an announcement that Rhodesia that had an error and could not download the error code was 50 which means

Nobody can tell you anything without proper system info or other technical details.
Mylenium

How to avoid primary key insert error and pipe those would-be error rows to a separate table?

Hi All,
Question: How can I ID duplicate values in a particular column before generating a "Violation of PRIMARY KEY constraint" error?
Background: this SSIS package pulls rows from a remote server table for an insert to a local table. The local table is truncated in step 1 of this package. One of the source columns, "ProductName," is a varchar(50) NOT NULL, with no
constraints at all. In the destination table, that column has a primary key constraint. Even so, we don't expect duplicate primary key inserts due to the source data query. Nevertheless, I've been
tasked with identifying any duplicate ProductName values that may try to get inserted, piping them all to a "DuplicateInsertAttempt_ProductName" table, and sending an email to the interested parties. Since I have no way of knowing which row
should be imported and which should not, I assume the best method is to pipe all rows with a duplicate ProductName out so somebody else can determine which is right and which is wrong, at which point we'll need to improve the query of the source table.
What's the proper way to do this? I assume the "DuplicateInsertAttempt_ProductName" table needs identical schema to the import target table, but without any constraints. I also assume I must ID the duplicate values before attempting
the import so that no error is generated, but I'm not sure how to do this.
Any help would be greatly appreciated.
Thanks,
Eric

agree about preventing a dupe or other error on some inconsequential dimension from killing a data mart load that takes a few hrs to run and is an important reporting system.
I looked into using the error output before, but i think it came up a bit short...
This is going from memory from a few years ago, but the columnid that comes out of the error data flow is an internal id for the column in the buffer that can't be easily used to get the column name.
No 'in flight'/in-process way exists to get the column name via something like thisbuffer.column[columnid].name unfortunately
In theory, the only way to get the column name was to initialise another version of the package (via loading the .dtsx xml) using the SMO .net libraries. I say in theory because I stopped considering it an option at that point
And the error code is fairly generic as well if i remember correctly. It's not the error that comes out of the db (Violation of UNIQUE KEY constraint 'x'. Cannot insert duplicate key in object 'dbo.y'. The duplicate key value is (y).) It's a generic
'insert failed'/'a constraint failed' type msg.
I usually leave the default ssis logging to handle all errors (and log them in the sysssislog table), and then I explicitly handle specific exceptions like dupes that I don't want to fail package/parent on error
Jakub @ Adelaide, Australia Blog

While installing latest update I lost ability to open Itunes. Getting "runtime error" and then next box says error 1114. Tried uninstalling and reinstalling and does not work. Getting same error. Very frustrating.

Cannot open Itunes after trying to install latest update. Getting runtime error and then error 1114. Tried uninstalling and reinstalling and still getting same error. How do I fix this. Very frustrating!

Hi there,
Earlier iTunes (and supporting applications) need to be completely uninstalled before you can install the new version. Here's the complete Apple info on this: http://support.apple.com/kb/HT1923
Mobile device application will most likely fail to uninstall, so you would need to visit its location(s) and manually delete the files then folder(s). The location of the folders is documented in this link from Apple.
It's a pain, but it should work.

Tns adapter error and tns timeout occured

Hi,
I have intalled Oracle 10g and it worked first time after installation.
Now, after I restarted my computet , I get the followin message (when I am connected to internet): TNS: timeout error occured
and when I am login to internet I get the following: tns: adapter error.
Plese can you help me?

This is a duplicated thread from : Re: tns: protocol adapter error
If you don't mind, let's continue with one single thread for this to be easier to track and answer.
This error means your tns entry is pointing somewhere else but your target listener/instance. Could you please specify the host/sid and post the tns entry you use to get connected?
~ Madrid.

Workflow manager IIS site throws a 403 Forbidden error and published workflows throw an error 400 bad request

Hello All , Request your help on the below issue ,
We have a single server farm SP 2013 where workflow was working as expected but its broken now , Not sure
what caused this. Workflow manager is installed alongside Service Bus. Workflow Manager client is installed on the same SP server.
We are able to create and publish the workflows from SP Designer without errors but when we start the workflow from SharePoint list we get an error " Sorry something went wrong". We have tried creating new workflows but the same problem.
We receive the below error in event viewer.
Error processing management request. Method: PUT, RequestUri: http://server URL:12291/$Workflows/89c767d2-82d2-4bd9-8e5e-dcace81d844f, Error: System.ArgumentException: The remote server returned an error: (400) Bad Request. ---> System.Net.WebException:
The remote server returned an error: (400) Bad Request.
at System.Net.HttpWebRequest.EndGetResponse(IAsyncResult asyncResult)
at Microsoft.ServiceBus.Messaging.ServiceBusResourceOperations.GetAsyncResult`1.EndGetResponse(GetAsyncResult`1 thisPtr, IAsyncResult ar)
at Microsoft.ServiceBus.Messaging.IteratorAsyncResult`1.StepCallback(IAsyncResult result)
--- End of inner exception stack trace ---
Server stack trace:
Exception rethrown at [0]:
at Microsoft.Workflow.Common.AsyncResult.End[TAsyncResult](IAsyncResult result)
at Microsoft.Workflow.Gateway.HttpAsyncResult.End[TAsyncResult](IAsyncResult result)
at Microsoft.Workflow.Gateway.WorkflowServiceGateway.<>c__DisplayClass6a.<EndCreateOrUpdateWorkflow>b__69()
at Microsoft.Workflow.Gateway.WorkflowServiceGateway.ExceptionFilter[T](Func`1 body)
at System.Threading.Tasks.TaskFactory`1.FromAsyncCoreLogic(IAsyncResult iar, Func`2 endFunction, Action`1 endAction, Task`1 promise, Boolean requiresSynchronization)
ULS logs give below error
Error 1 - Microsoft.Workflow.Client.InternalServerException: An internal error occured. For more details, please see the server logs. HTTP headers received from the server - ActivityId: ba6e77cb-aaae-41a0-9cc8-1ea817d0045e. NodeId: Servername.
Scope: /SharePoint/default/bc694777-7bbb-473e-ab2d-20087221a97a/5229793b-31a1-44b1-9b0b-374f38b762fd. Client ActivityId : a6daec9c-7139-7034-b4ee-edeb1f96ec2a. ---> System.Net.WebException: The remote server returned an error: (500) Internal Server Error.
at Microsoft.Workflow.Common.AsyncResult.End[TAsyncResult](IAsyncResult result)
at Microsoft.Workflow.Client.HttpGetResponseAsyncResult`1.End(IAsyncResult result)
at Microsoft.Workflow.Client.ClientHelpers.SendRequest[T](HttpWebRequest request, T content) -
-- End of inner exception stack trace ---
at Microsoft.Workflow.Client.ClientHelpers.SendRequest[T](HttpWebRequest request, T content)
at Microsoft.Workflow.Client.WorkflowManagementClient.SendRequest[T](HttpWebRequest request, T content)
at Microsoft.Workflow.Client.WorkflowManager.Publish(WorkflowDescription description, Boolean terminateActiveInstances)
at Microsoft.SharePoint.WorkflowServices.FabricWorkflowManagementClient.PublishWorkflow(String serviceGroupName, WorkflowDescription workflow)
at Microsoft.SharePoint.WorkflowServices.WorkflowProxy.CreateDefinitionSubscription(String subscriptionName, String eventSource, List`1 eventTypes, String definitionName, IDictionary`2 metadata, WorkflowEventContext eventContext) StackTrace:
at Microsoft.Office.Server.Native.dll: (sig=35339f9c-8871-4ef1-9118-9c1bd0cb6598|2|microsoft.office.server.native.pdb, offset=131CE)
at Microsoft.Office.Server.Native.dll: (offset=21B4D)
Error 2 - Error publishing workflow subscription (republish or retry publish) information: Microsoft.Workflow.Client.InternalServerException: An internal error occured. For more details, please see the server logs. HTTP headers received
from the server - ActivityId: ba6e77cb-aaae-41a0-9cc8-1ea817d0045e. NodeId:
ServerName. Scope: /SharePoint/default/bc694777-7bbb-473e-ab2d-20087221a97a/5229793b-31a1-44b1-9b0b-374f38b762fd. Client ActivityId : a6daec9c-7139-7034-b4ee-edeb1f96ec2a. ---> System.Net.WebException: The remote server returned an error: (500)
Internal Server Error.
at Microsoft.Workflow.Common.AsyncResult.End[TAsyncResult](IAsyncResult result)
at Microsoft.Workflow.Client.HttpGetResponseAsyncResult`1.End(IAsyncResult result)
at Microsoft.Workflow.Client.ClientHelpers.SendRequest[T](HttpWebRequest request, T content) -
-- End of inner exception stack trace ---
at Microsoft.Workflow.Client.ClientHelpers.SendRequest[T](HttpWebRequest request, T content)
at Microsoft.Workflow.Client.WorkflowManagementClient.SendRequest[T](HttpWebRequest request, T content)
at Microsoft.Workflow.Client.WorkflowManager.Publish(WorkflowDescription description, Boolean terminateActiveInstances)
at Microsoft.SharePoint.WorkflowServices.FabricWorkflowManagementClient.PublishWorkflow(String serviceGroupName, WorkflowDescription workflow)
at Microsoft.SharePoint.WorkflowServices.WorkflowProxy.CreateDefinitionSubscription(String subscriptionName, String eventSource, List`1 eventTypes, String definitionName, IDictionary`2 metadata, WorkflowEventContext eventContext)
at Microsoft.SharePoint.WorkflowServices.FabricSubscriptionService.<>c__DisplayClass1.<CreateDefinitionSubscription>b__0()
at Microsoft.SharePoint.WorkflowServices.WorkflowServiceContextExtensions.InvokeWithEcosystemRetry(WorkflowServicesContext context, EcosystemRequiredMethod method)
at Microsoft.SharePoint.WorkflowServices.FabricSubscriptionService.CreateDefinitionSubscription(String subscriptionName, Guid eventSourceId, String eventSource, List`1 eventNames, String definitionName, IDictionary`2 metadata, WorkflowEventContext eventContext)
at Microsoft.SharePoint.WorkflowServices.WorkflowSubscriptionStorageEventReceiver.ItemUpdating(SPItemEventProperties properties)
Error3 - Microsoft.Workflow.Client.InternalServerException: An internal error occured. For more details, please see the server logs. HTTP headers received from the server - ActivityId: ba6e77cb-aaae-41a0-9cc8-1ea817d0045e. NodeId: ServerName.
Scope: /SharePoint/default/bc694777-7bbb-473e-ab2d-20087221a97a/5229793b-31a1-44b1-9b0b-374f38b762fd. Client ActivityId : a6daec9c-7139-7034-b4ee-edeb1f96ec2a. ---> System.Net.WebException: The remote server returned an error: (500) Internal Server Error.
at SPRequest.AddOrUpdateItem: UserPrincipalName=i:0).w|s-1-5-21-182846760-3036401646-508972453-351846, AppPrincipalName= ,bstrUrl=http://sharepointsite ,bstrListName={48A21758-9123-48F0-9BDE-9EB632B07BC6} ,bAdd=False ,bSystemUpdate=False ,bPreserveItemVersion=False
,bPreserveItemUIVersion=False ,bUpdateNoVersion=False ,pbstrNewDocId=00000000-0000-0000-0000-000000000000 ,bHasNewDocId=False ,bstrVersion=16 ,bCheckOut=False ,bCheckin=False ,bUnRestrictedUpdateInProgress=True ,bMigration=False ,bPublish=False ,bstrFileName=<null>
Any help appreciated. Thanks in advance.

Hi,
As I understand, you encountered the issue when you published a workflow on SharePoint 2013 workflow platform.
I wonder does it work well before when using 2013 workflow platform? If it works before, did you install any updates or change the configuration to the workflow related settings?
If this is the first time after you installed workflow manager 2013, then I’d recommend you try re-registering workflow service per the link below and post the result:
http://technet.microsoft.com/en-us/library/jj663115(v=office.15).aspx
http://technet.microsoft.com/en-us/library/jj658588(v=office.15).aspx
From the message you accessed workflow host uri, please make sure the account to wfsetup and wfservice account are both in wfadmins group.
http://blogs.msdn.com/b/briangre/archive/2013/02/20/least-privilege-configuration-for-windows-azure-workflow-with-sharepoint-2013.aspx
Regards,
Rebecca Tu
TechNet Community Support

Superdrive error and inability to write DVDs (error code 0x8002006D)

I was attempting to burn media that totaled 4.4 GB on a 4.7 GB single layer quality TDK -DVD-R. It failed on 2 attempts after almost completing the burn, and then on the 3rd attempt i got:
"Sorry, the operation could not be completed because an unexpected error occurred (error code 0x8002006d)."
I tried burning a lower capacity CD-R and it worked fine.
Played a music cd and DVD and it played fine
Played a CD-r copy of an original music CD and it worked fine.
I searched the web and it advised that:
1. your optical lens may be dirty (almost seldom use it, not even to watch DVDs)
2. a bad batch of media (couldn't be because I have burned from this batch for the past year)
3. Lens needs calibration (possible via DVD/CD lens cleaners)
4. try a different brand of media or try a different format DVD+R
My superdrive gets very minimal use, so I knew this couldn't be a "wear & tear" issue. I opted for option 3 and cleaned my drive using a memorex branded "OptiDisc" CD/DVD cleaner. After attempting to play the cleaner, it never did go to an Audio CD option, it merely spun for about 40 sec and spit out the cleaner.
I am happy to report that whatever it did, it must have recalibrated the superdrive. now it successfully burns DVD-R again.
hope this experience helps.

whatever it did, it must have recalibrated the superdrive
No - it simply cleaned the lens system. Your #1 "1. your optical lens may be dirty (almost seldom use it, not even to watch DVDs)" Low usage might make the matter more likely; all it takes is a little dust or dirt to get on the lens to cause problems.
There are TWO optical systems - one for DVDs and one for CDs. The cleaning disc simply 'brushed off' each optical system lens.
BTW, the burning laser actually calibrates itself to your media before it starts each burn (there is a special area on each writable disc reserved for his purpose).

Chatteremail error and continuous reset loop - IMAP error when i don't have an IMAP account set up!

A few weeks agoo I suddenly started receiving an error when I try to synch my Chatteremail. I have 2 POP accounts set up on the phone. When I attempt to QuickSync, I see in the status area that I am logging in. . .and then I get a pop up error that says "no more than 8192 messages can exist on an IMAP server. the remainder will not be synched." i choose OK and then the phone resets itself and continues in this loop until i get it to stop trying to connect and choose to work offline. I don't even have an IMAP account on this phone so I am very confused. . .
I have tried to contact Palm Support but they are not getting back to me (despite their 24 hour response time promise). Any ideas? I made no changes to my email set up on my phone nor downloaded any software before this happened - it truly came out of nowhere.
edited to add: I have also deleted all emails off the server and tried the sync again, with no luck.
Post relates to: Treo 700p (Verizon)
Message Edited by atsmith on 04-17-2008 08:33 AM

Did you ever get a solution to this? I am now getting that same message. I am now unable to use chatteremail.
Anyone have a fix?
Post relates to: Treo 755p (Verizon)
Message Edited by aminoff on 07-25-2008 05:20 PM
Message Edited by aminoff on 07-25-2008 05:21 PM

Itunes has encountered an error and needs to close..error unknown

I've tried to install both ITunes 7.6 and Quicktime numerous, countless times...They both load successfully, but won't open. I've tried to uninstall and re-install and spent 3 hrs on the phone with Windows tech, but to no avail??? Please any suggestions..seems like alot of other users are having this problem..thanks

Ally612 wrote:
I've tried to install both ITunes 7.6 and Quicktime numerous, countless times...They both load successfully, but won't open. I've tried to uninstall and re-install and spent 3 hrs on the phone with Windows tech, but to no avail??? Please any suggestions..seems like alot of other users are having this problem..thanksTry the solution proposed by jvh:
Apparently quite a few people have been bumping into the problem that, when trying to update Itunes on windows, it complains about a missing Itunes.msi file. If you Browse for this file however, you’ll find it in the location that it’s supposed to be (C:\Program Files\Apple Software Update\Packages).
I tried a few things to fix this, including downloading the latest iTunes from Apple’s website. After about 30 minutes of digging, I discovered that there’s a very simple fix.
1. Download the Windows Installer Cleanup Utility
2. Install the program (MS Office not required!)
3. Run the program from Start->All Programs->Windows Install Cleanup Utility
4. Click on iTunes, and then click the “Remove” button
5. Run the iTunes installer!

Vshost32.exe stop error and can not capture this error, how to debug

問題簽章:
問題事件名稱: BEX
應用程式名稱: hello.exe
應用程式版本: 1.0.0.0
應用程式時間戳記: 52db5c9a
錯誤模組名稱: maple.dll_unloaded
錯誤模組版本: 0.0.0.0
錯誤模組時間戳記: 4de6c98e
例外狀況位移: 069beb71
例外狀況代碼: c0000005
例外資料: 00000008
作業系統版本: 6.1.7601.2.1.0.256.48
地區設定識別碼: 3076
其他資訊 1: 0a9e
其他資訊 2: 0a9e372d3b4ad19135b953a78882e789
其他資訊 3: 0a9e
其他資訊 4: 0a9e372d3b4ad19135b953a78882e789

Below is the translation of the error. It looks like you made a simple application called Hello that called a dll named Maple. Maple is probably a form since the error is being created in an unload method. Is the error occuring when you close
the form or is the error occuring while the form is executing?
Was the dll added to your project as a reference or are you calling the dll as a library call using Marshal? If you added the dll as a reference you should be able to debug the code like any other code provided you have the source project. You
should of added the dll to your project by browsing to the project where it was built taking the dll from the debug folder. Doing this allows VS studio to get the source code.
If the code wasn't added by reference then you need to create a log file inside the Maple.dll to output debug messages to a file or add message boxes that gives information to help solve the issue. You also may want to add additional exception handler
inside Maple.dll.
Problem signature:
Problem event name: BEX
Application name: Hello.exe
Application version: 1.0.0.0
Application timestamp: 52db5c9a
Faulting module name: Maple.dll_unloaded
Faulting module version: 0.0.0.0
Fault module timestamp: 4de6c98e
Exception offset: 069beb71
Exception code: c0000005
Exception data: 00000008
OS version: 6.1.7601.2.1.0.256.48
Locale identifier: 3,076
Additional information 1: 0a9e
Additional information 2: 0a9e372d3b4ad19135b953a78882e789
Additional information 3: 0a9e
Additional information 4: 0a9e372d3b4ad19135b953a78882e789
jdweng

ON-ERROR and ON-MESSAGE

Is anyone using a stored procedure to trap and intercept Oracle Forms Errors and Messages using the ON-ERROR and ON-MESSAGE Triggers?
In order to do this, I would like to store Oracle's Forms error in a table. I have been unable to located the .msg file that contains the flat file for all of oracle errors and messages. I have loaced the binaries at: $ORACLE_FORMS_HOME\forms90 in the following 5 files: (1) fmcus.msb (2) fmdus.msb (3) fmfus.msg (4) fmgus.msg and (5) fmmus.msb
Does any know where I can locate the .msg files?
Any help would be appreciated.

Hello,
You can use ERROR_TYPE and ERROR_CODE to ask your own tables
Declare
err_code NUMBER := ERROR_CODE;
errmsg VARCHAR2(512) ;
Begin
If ERROR_TYPE = 'FRM' Then
SELECT message_text
INTO errmsg
FROM forms_message_table
WHERE code = err_code ;
Elsif ERROR_TYPE = 'ORA' Then
SELECT message_text
INTO errmsg
FROM database_message_table
WHERE code = err_code ;
Else
errmsg := ERROR_TEXT ;
End if ;
Set_Alert_Property( 'ALERT1', TITLE, 'Forms error message' ) ;
Set_Alert_Property( 'ALERT1', ALERT_MESSAGE_TEXTE, errmsg ) ;
Ok := Show_Alert( 'ALERT1' ) ;
Exception
When NO_DATA_FOUND Then
Set_Alert_Property( 'ALERT1', TITLE, 'Forms error message' ) ;
Set_Alert_Property( 'ALERT1', ALERT_MESSAGE_TEXTE, ERROR_TEXT ) ;
Ok := Show_Alert( 'ALERT1' ) ;
End ;

ACE duplicate ack and tcp out-of-order errors

Hi,
I have just performed a capture using a NAM in my 6500 on the port attached to my ACE appliance.
What i have noticed in the capture is a lot of duplicate ack errors and tcp out-of-sync errors.
The reason we found this was becuase the link utilisation per session seems higher than we expected, hence are the errors adding to this and is there any way to remedy them?
Thanks
Scott

Hi Scott,
I'm not sure why you would see duplicate packets, although when you use SPAN, I know you can see them when you configure it to capture both directions on a VLAN. This is because you see each packet as it enters and leaves the VLAN. I don't know if that would apply to a NAM.
One thing you could do is use the ACE 4710's built-in capture utility to see if you see the same symptoms from an alternative source. This is covered in the Capturing Packet Information section of the configuration guides.
Hope this helps,
Sean

IPod generates a svchost.exe error and blocks the computer

Ok, I got an iPod Nano 2GB Silver today and when I plug it in the USB port, a svchost.exe error pops up. The only thing I can do is to press OK, but when I do that, another and another and another... same error pops up. I have to reset the computer in order for the computer to start functioning normally.
I will try to translate what the Event Viewer says about the error (and this is what the error pop-up also states):
Opening application: svchost.exe - Program error : Instructions on »0x00000000« reffered to the memory on »0x00000000«. The memory couldn't be written.
The thing is though, it's working fine on some other laptop, but I don't understand why this is happening on my desktop?! And some of the older mp3 players (not iPods) are working just fine.
Please, help me!

I have a similar problem which began a couple weeks ago. Same svchost.exe closure, only I couldn't figure out what was causing the problem. Did the format C: and clean XP install, then gradually reinstalled software. When I got around to installing iTunes again, and about 24 hours goes by, I get the same message again. Both the popup and event viewer tell me that the iPod
Service caused the failure. Windows would only suggest that the problem was caused by Windows Update.
Before the fault bucket was generated, there was an Application Information message that states:
The description for Event ID ( 0 ) in Source ( iPod Service ) cannot be found. The local computer may not have the necessary registry information or message DLL files to display messages from a remote computer. You may be able to use the /AUXSOURCE= flag to retrieve this description; see Help and Support for details. The following information is part of the event: Service started.
So now I am unable to keep my iPod updated, charged, used. Is this what I paid a premium price for?

Adobe CS5 error and exit issue

Hi There,
I have a computer installed Adobe CS5 suite, while using Flash CS5, sometimes, there will be error message like "Memery cant be read" or "Access error" and then after close the error message, CS5 exit, need to restart it.
I have tried to reinstall the OS and reinstall CS5, it just doesn't work, do guys have any good ideas on this?
Computer Hardware:
HP workstation xw8600
4 core cpu.
4GB memory.
OS: WinXP SP2.
Before install CS5, our company use CS3 and it works well for years.
many thanks!

Hi,
Remove the all the files from
/Volumes/Mac HD1/Adobe Encore Projects/BD/AuthorScriptHDMVSessions/
This will resolve this issue.
This happens if any file corrupted in Volumes/Mac HD1/Adobe Encore Projects/BD/AuthorScriptHDMVSessions/ folder
Thanks,
Pankaj Gauba

At startup-system error and divide by zero

I've been having a lot of problems starting up my beige G3 mini tower, it has 233mhz, 384ram, mac os9.1. I've zapped the pram and held the shift key down to boot with extensions off, didnt work. I've changed the battery twice in case the first replacement was bad, it started up and ran long enough for me to trash all the preferences, I tried to change the extensions, but when restarting it was back to not completely starting up. I've tried pressing the button near the pci slots with the battery out, 30 seconds, waited 30 minutes and held down the button for another 30 seconds, replaced the battery, checked the sound card for looseness then at startup it worked till I changed the time and date. I tried the battery and button again this time waiting over night between pressing the button for 30 seconds, after startup I was able to run disc first aid and it said everything was ok, then crashed again when I tried to change the date and time. I've even tried booting up from command/option/o/f, I'm not sure what firmware is but it would try to start up that way,but was very slow with a os cd in the cd drive. I tried to erase the hard drive but I couldnt get it to start up from a cd, iv'e tried os9, the original cd that came with the computer and a system recovery cd.
Most times when trying to start it up it chimes, then the happy mac with a grey screen, then the mac os screen, then the bomb with "system error" and under that "bus error" under that it says to restart with extensions off. sometimes the button for restart will even work with the cursor. Once, after trying to start up after all the battery removal, pressing button near pci slots , pressing com/opt/o/f, extensions off, the screen getting to the mac os then the bomb dialogue, it said system error and instead of saying "bus error" it said "divide by zero". Thats the first and only time I've seen that one. Also, the grey screen (with the happy mac disc icon) now has horizontal lines with texture? that I havent noticed before.
got any ideas what I should do next? I probably wouldnt bother with my G3 anymore because I just bought a new Imac, but I have a vinyl cutter hooked to it, it has the old round serial port cables and I would have to buy new software, cables and dongle to use it with my new Imac, I also have illustrator, photoshop, scanner, and drawing tablet on my G3 that I cant use on my new Imac (intel) leopard.
Is my hard drive or motherboard dying? is there a way to find out if and what hardware is messed up? and if so, is there still still parts out there for this G3?

Hi, R1camper -
I ran disc first aid from the cd and and it said it couldnt fix-overlapped extent allocation,4,479.
That is a type of disk directory damage, one which Disk First Aid can not repair.
Alsoft's DiskWarrior can usually repair that kind of damage, with no loss of files. If you choose to go this route, suggest you call (or email) Alsoft's sales department, and request an older version of DiskWarrior - the current versions won't run on your Beige G3/MT.
However, if you can manage to live with the loss of files, you can probably replace the hard drive for less cost.
Your Beige G3/MT came with either an ATA (now often referred to as PATA and/or IDE) drive or a SCSI drive - it could have been ordered with either when the machine was new.
With luck it will be an ATA drive, since those are the least expensive and the easiest to install. Such drives are not Mac-specific - any ATA drive designed for internal use and of appropriate size will work. The only item of concern is to set the drive's jumpers properly. The drive should be jumpered as Master (it may come preset as Master or as Cable Select - Cable Select will not work on your model), unless it is a Western Digital in which case it should be set to Single if that is an available choice.
There is probably little to gain by getting a 7200RPM drive, especially if there is extra cost for one vs. a 5400RPM drive - the relatively slow internal bus speed on your machine will not be able to take significant advantage of a faster drive.
Re the RAM, if you have the time you might try replacing any you took out. Over time the contact the module makes in its slot can get iffy - removing and replacing the module usually fixes that problem, by wiping the contacts clean.

TNS-12560: TNS:protocol adapter error and TNS-00530: Protocol adapter error

Similar Messages

Maybe you are looking for