Tns ping pointing to old server in windows

HI,
I am facing issue while trying to access server from oracle client after changing database server name.
I have configured tns file from netca and its showing connection successfull but stll when i do tnsping it points to old server and gives below error.
Please help me in this..
Its on windows server 2003.
db is 11g and server
C:\Documents and Settings\msdem>tnsping visR1211
TNS Ping Utility for 32-bit Windows: Version 11.1.0.6.0 - Production on 05-SEP-2012 17:22:43
Copyright (c) 1997, 2007, Oracle. All rights reserved.
Used parameter files:
E:\DB_SOA\app\msdem\product\11.1.0\db_1\network\admin\sqlnet.ora
Used TNSNAMES adapter to resolve the alias
Attempting to contact (DESCRIPTION = (ADDRESS_LIST = (ADDRESS = (PROTOCOL = TCP)(HOST = vena.xxx.com)(PORT = 1571))) (CONNE
CT_DATA = (SERVICE_NAME = visR1211)))
TNS-12545: Connect failed because target host or object does not exist

Aman wrote:
HI,
I am facing issue while trying to access server from oracle client after changing database server name.
I have configured tns file from netca and its showing connection successfull but stll when i do tnsping it points to old server and gives below error.
Please help me in this..
Its on windows server 2003.
db is 11g and server
C:\Documents and Settings\msdem>tnsping visR1211
TNS Ping Utility for 32-bit Windows: Version 11.1.0.6.0 - Production on 05-SEP-2012 17:22:43
Copyright (c) 1997, 2007, Oracle. All rights reserved.
Used parameter files:
E:\DB_SOA\app\msdem\product\11.1.0\db_1\network\admin\sqlnet.ora
Here it is reporting where it found sqlnet.ora. Most likely it is using tnsnames.ora from the same location. Check your entry for 'visR1211' in that copy of tnsnames.ora and you will find that it references exactly what tnsping is showing in 'Attempting to contact', below.
>
Used TNSNAMES adapter to resolve the alias
Attempting to contact (DESCRIPTION = (ADDRESS_LIST = (ADDRESS = (PROTOCOL = TCP)(HOST = vena.xxx.com)(PORT = 1571))) (CONNE
CT_DATA = (SERVICE_NAME = visR1211)))
TNS-12545: Connect failed because target host or object does not existFor more information on tracing out a connection attempt, start here: http://edstevensdba.wordpress.com/2011/02/09/sqlnet_overview/, then follow by reading the related posts.

Similar Messages

Solman_Setup, J2EE Configuration, start J2EE Config points at old server

Hi,
I have recently performed a system copy on my solution manager server. As far as I'm aware I have followed the correct procedure and performed all post installation tasks.
Since the copy I have a problem with my SLD which is in my solution manager system. I think it may be one of two problems.
Firstly
When I run SOLMAN_SETUP initial configuration step 3 - Start J2EE Configuration the url launched points at my old server name rather than the new one.
I have raised a call with SAP and have so far done the following things
Notes : 1297849 & 805344 - Everything pointed to new server
Notes 1301106 & 669669 - I have patched ABAB & JAVA AND updated the Content in the SLD
Note 624282 : Transaction LCRSERVADDR contains no entries and the SLDCHECK launches the correct SLD info.
None of these notes resolved my issue
Secondly
In transaction SMSY my solution manager settings are not correct - The ABAP stack is correct the message server points to the new message server, however the JAVA stack message server still points to the old system. I have tried to delete but I am unable to as I get the message system in use in Groups / Landscapes. SAP have done work on my server as part of the SURGEN programme and I'm sure this is something they have done that I am not able to remove.
Please help.
Regards
Tracey Smith. (John Beard - Corporate account for Kelda Group)

You are using client 100 for example. It seems so that the UME store from the Java stack still points to the 001 client (probably you made a client copy on ABAP side from 001 to 100????). The CTC want to check SOLMAN_ADMIN user in the system where the UME destination is set (in this case 001).
So basically you got now 2 options: redirect your Java UME to client 100 or you simply create the required user SOLMAN_ADMIN in 001 client.

Windows 7 Client 'sees' an old version of windows 2012 server share

Hi All,
I have a problem which seems to be a common theme looking at other threads. Here's the overview of the problem:-
I have multiple windows 7 clients and a windows 8.1 client within a 2008 Server in a domain.
I also have a Windows 2012R2 Server which is not joined to the domain. There is a Share on the 2012R2 which has the Caching Option turned off. Everyone full control on Share & File permissions.
One of the Windows 7 machines in Explorer when it looks at
\\2012server\share sees an old version of the folder. It seems that SMB 2 chaching is working too well. Not even pressing F5 or clicking View, Refresh updates windows explorer.
It took a reboot to get the workstation to see the up to date contents of the share on the 2012 server.
We don't seem to have that behaviour with that client against the 2008 server.
I have seen this behaviour on another machine un-related to us at another location which was in a workgroup with a 2012 server and no domain.
Questions:-
Is there some sort of problem with Windows 7 workstations working against 2012 Servers in a non-domain setting or is it just Windows 7 against 2012 servers period?
I understand that Windows 7 utilises SMB1 & SMB2. SMB2 introduced caching. If the server has turned off the share cache option should the client cache the contents of the share or the information about the files & folders & 'file not found'
information?
I want to open a file handle to a file on a network share so I can read and write data to it. But I also want to know that when I look at the folder to open the file I'm actually looking at the live version of the folder and files in the folder and
not a cached version of the folder. If it's a cached version the file might be there already but I won't see it.
Is there an API call that tells the client to get a fresh view of the server share so I can be absolutely sure that when I look for a file on the server I'm getting the correct answer and not one from cache.
I first posted the question with the same subject "Windows 7 Client 'sees' an old version of windows 2012 server share" in the Windows 7 Networking Fourm
https://social.technet.microsoft.com/Forums/en-US/23bf3627-987b-4c27-8062-85a284a2cda4/windows-7-client-sees-an-old-version-of-windows-2012-server-share?forum=w7itpronetworking and it was suggested I repost in here. Please do take the time to read
the thread which will save time with suggestions that have already been covered.
As the computers that can be affected by this problem are not mine I cannot enforce or guarantee that any of my 'client base' will apply any hotfixes. I will also not have the ability to tweak registry settings as I can't guarantee Admin Access.
It seems that we need to go back to SMB1 as all the tweaks to SMB since those days have introduced problems with the basic requirement of sharing files from a share on a server for Read/Write purposes. I have tried turning a network back to SMB1 and that
has resolved a lot of the issues but then I found a post/MS blog that states not to leave the network on SMB1
The Caching option of the share had already been turned off. Surely Windows clients should not cache any information about the share but I think that is not the case.
Thanks is advance
Robert

Hi Shaon,
Thanks for looking into this.
If this is a known issue, why isn't the hotfix rolled into a general windows update if this is a known problem? However this doesn't just affect domain joined workstations.
Surely it's basic functionality for a networked computer to access files and folders on a network file server. It's what networks were invented for at the end of the day.
I am unable to apply hotfixes to these computers that are having the problem due to the fact they are not mine but my customers.
At one of my customers sites I disabled SMB2 from the server and network clients as well as disabling the network adapter power saving option. This seemed to resolve the issues that I saw on one client that seemed to be 30 minutes behind the rest of
the network. The hotfix you link to states that it is for Domain joined computers. At my customer site the PC's are not in a domain at all, just a workgroup with workstations and a 2012r2 server. Will the hotfix be applicable to non-domain machines?
Also many clients seemed to loose the file handle to an open file on the server. I'll get them to turn SMB2 back on at some point after I send out some updates but all the problems I see seem to be caused by the caching functions in SMB2. SMB1 is good and
stable. It's SMB2 that seems to be causing the problems as it was designed from the ground up for caching.
Has this networking issue been resolved in Windows 8, 8.1 and 10?
As I am unable to apply a hotfix to 1000's of PC's that are not mine, is there an API call or something where I can get the windows client to stop lying and get me the current state of a folder on the server?
Will Turning off ClientSideCaching fix the issue? HKLM\SYSTEM\CurrentControlSet\Services\MrxSmb\Parameters\
CSCEnabled
Or will every machine need to be tuned individually according to the following guide:-
https://social.technet.microsoft.com/Forums/windowsserver/en-US/7bd9978c-69b4-42bf-90cd-fc7541ccb663/forum-faq-troubleshooting-network-file-copy-slowness?forum=winserverPN ?
Robert

Where in migration process does old server stop functioning as primary server?

I am migrating from a SBS 2003 box to a new WS 2012 R2 Essentials box - following the instructions from
"Migrate from Previous Versions to Windows Server 2012 R2 Essentials or Windows Server Essentials Experience". What I need to know is where in the process does
the old server stop functioning as a server for my network. What I mean by this is when in the migration process (when I add the new server as a replicate DC? not until I demote the old server?) will any programs/databases on the old server no
longer be available to client computers?
Thanks for any insight.

Yeah, we need to agree on what is meant by "the server". In Windows, Server means many different things. Each time you move, a role or feature from the "old" to the "new" the old server ceases to function as "the server"
for that role or feature. The basic functions of a Windows DC include Active Directory, 5 FSMO roles, file and print services, and application services to name just a few.
So the answer to your question is more to do with what you mean by "server". In particular, for the application role, you must move the app to the new server by whatever means the developer recommends. At that point, regardless of whatever
else is going on the old server is out of the picture for that application.
Larry Struckmeyer[MVP] If your question is answered please mark the response as the answer so that others can benefit.

Shortcut to new server volume mounts old server

I have recently transferred all files from a Windows NT Server and a Windows 2000 Server to an OSX Tiger Server. I duplicated the files to the new server using Retrospect but have left copies on the old server in case anything was missed.
On my four OSX Panther G4s, I have mounted the new server and created shortcuts (aliases) to the new volumes. Three of them work fine. On the fourth G4, however, the aliases to the new server mount the volumes on the old server! I have deleted all the aliases and recreated them to no avail. I have deleted the aliases to the old server entirely and all is well until it becomes necessary to mount the old server. Even if the old server is mounted manually, the next time the aliases to the new server are used, they will mount the old server.
All four G4s access the servers via AFP because we still have OS9 workstations which need to access the same files.
Any suggestions?
PowerMac G4 Mac OS X (10.4.4) Server

Hi There!!!!
In Exchange 2010, clients do not connect directly to the mailbox role, they go through the
CAS role, so it sounds like you need to set the RPCClientAccessServer to point to the new Exchange 2010 server.
Do this via PowerShell :
GET-MAILBOXDATA | SET-MAILBOXDATABASE -RPCCLIENTACCESSSERVER <FQDN OF NEW CAS SERVER>
But as you have 160 mailboxes to migrate , which would be quite time consuming and needs lots
of efforts, so rather than opting manual way for migration I would refer you to do this using any professional Migration Software like Stellar Mailbox Extractor for Exchange Server, which can perform the Migration of 160 mailboxes in quick time.

Using FF 6.0.2 on Windows 7 64bit has anyone else noticed slow FF windows updates unless pointer was over a FF window and moving?

I've noticed FF 6.0.2 windows update faster and downloads stay active when the mouse pointer is over a FF window and moving. I've "played" with the download window. When I allow the pointer to just sit, the download usually stops. When I move the pointer, the download resumes. This is verified by the lights on the cable modem showing changes in internet activity.
The same appears true in cases like the FF help search. Type a question and hit return and screen stalls. Move the mouse and the screen refreshes.

Hello,
I am not very familiar wth Microsoft Security Essentials, but believe that it just makes use of the existing Windows Firewall which is present with the operating system.
To me it is odd that the guest OS reports 192.168.1.254 as the IP address for its gateway and DHCP server yet it cannot access them when pinged. Let's try pinging from host to guest (and vice-versa) and see what happens:
From the host OS at 192.168.1.78, try pinging the guest OS at 192.168.1.75.
Then, from the guest OS at 192.168.1.75, trying ping the host OS at 192.168.1.78.
Is each operating system able to ping each other?
Regards,
Aryeh Goretsky
I am a volunteer and neither a Lenovo nor a Microsoft employee. • Dexter is a good dog • Dexter je dobrý pes
S230u (3347-4HU) • X220 (4286-CTO) • W510 (4318-CTO) • W530 (2441-4R3) • X100e (3508-CTO) • X120e (0596-CTO) • T61p (6459-CTO) • T43p (2678-H7U) • T42 (2378-R4U) • T23 (2648-LU7)
Deutsche Community Comunidad en Español Русскоязычное Сообщество

Need platform independent java code for TNS PING

Hi, I am able to ping server /ip address. but unable to ping some TNS entry.
There is one way to ping TNS entry using System command, but that will make my code platform dependent. i want platform independent code.. need code help for TNS Ping to database server.. here are my code:
---Code for server / Ip address ping:---------
package DBM;
import java.io.IOException;
import java.net.InetAddress;
import java.net.UnknownHostException;
import java.util.ArrayList;
import oracle.net.TNSAddress.*;
public class PingServer
public static void main(String[] args)
System.out.println(" Server Pinging Starts...");
ArrayList<String> list=new ArrayList<String>();
list.add("g5u0660c.atlanta.hp.com");
list.add("g1u1675c.austin.hp.com");
list.add("gvu1785.atlanta.hp.com");
list.add("10.130.14.109");
list.add("10.130.0.173");
list.add("DESCRIPTION = (SDU = 32768) (enable = broken) (LOAD_BALANCE = yes) (ADDRESS = (PROTOCOL = TCP)(HOST = gvu1515.atlanta.hp.com)(PORT = 1525))(ADDRESS = (PROTOCOL = TCP)(HOST = gvu1785.atlanta.hp.com)(PORT = 1525)");
list.add("IDSENGI");
//This Ipadd variable is used to convert the arraylist into String
String ipadd="";
try
     for(String s: list)
          ipadd=s;
          // InetAddress is class.in this class getByName()is used to take only string parameter.
          InetAddress inet = InetAddress.getByName(ipadd);
          //InetAddress inet1 =InetAddress.getAllByName("IDESENGP");
          System.out.println("Sending Ping Request to " + ipadd);
          //in InetAddress call IsReachabe(3000)method is used to ping the server IP and if ping is successfully then return true otherwise false.
          //IsReachable()take time in millisecond and return type is boolean.
          System.out.println("Host is reachable: "+inet.isReachable(3000));
     System.out.println("Server Pinging program is working fine........");
catch (UnknownHostException e)
     System.err.println("Host does not exists");
catch (IOException e)
     System.err.println("Error in reaching the Host");
----Code for TNS ping using system host----
package DBM;
import java.io.*;
public class doscmd
public static void main(String args[])
try
Process p=Runtime.getRuntime().exec("cmd /c tnsping IDSENGP");
p.waitFor();
BufferedReader reader=new BufferedReader(new InputStreamReader(p.getInputStream()));
String line=reader.readLine();
while(line!=null)
System.out.println(line);
line=reader.readLine();
catch(IOException e1) {}
catch(InterruptedException e2) {}
System.out.println("Done");
The above two codes are working absolutely fine... but need TNS ping program is platform dependent..we need to deploy it in both windows, unix...
Please help.

You don't need to install another JDK, just use the api from 1.2 and you should be fine. You can even use the 1.4 jdk to compile as if it were 1.2 by using the -target option in javac.

Identity Server under Windows 2003

Hi All,
can I run Identity server under Windows 2003 Server ? And, is planed Identity server version for Linux ?
Thank You
Lada D.

A 4.0.1 backup can be restored on the new server - even if it is running 4.1 or 4.2. I don't believe the backup will carry over anything specific to the old server's IP address. I'd recommend that you keep the same hostname (DNS-wise) - especially for things like the server's SSL certificate - although that too won't be part of the application backup so you can give the new server a new name if the customer is strongly set on that.
Note that you may change to soft appliance platform at this point. If the customer has a VMWare environment available, I'd strongly suggest considering this option. the soft appliance is a breeze to install and setup.
In either case, please refer to the installation guide for details.

Delete the DNS delegations pointing to this server

Good morning,
I'm getting ready to decommission my Windows Server 2008 R2 server and replace it with a Windows Server 2012 R2 (completely new hardware). After I decommission my current DC I will reboot it, change its IP address and name and then reboot it again.
I am then going to give the new server the old IP and name of my old DC (so basically the name and IP address of the active DC will not change). I'll then promote this server back into the domain. Since the new DC in the end will have the
same IP and NAME as the old DC, should I uncheck the "Delete the DNS delegations pointing to this server" when I decommission the old DC since the new one would have the same name? Thanks!

You can uncheck it and then promote it. Once done, make sure that the new DC is set under
Name Servers tab in your zones properties.
This posting is provided AS IS with no warranties or guarantees , and confers no rights.
Ahmed MALEK
My Website Link
My Linkedin Profile
My MVP Profile

Removing old server

I needed to move my exchange 2010 server to new hardware. So, I built the new server, loaded Exchange 2010 on Windows 2008, created send/receive connectors, changed the firewall to point my external ip address to the new server, installed a new ssl,
moved all the mailboxes and public folders to the new database. Everything seems to be working fine, and I want to try shutting down the old server this weekend.
However, I just tried to telnet to the new server on 25 and I get:
421 4.3.2 Service not available
Connection to host lost.
Transport service is running. Did I miss something?

OK, now a new question: I have IIS, connectors, transport, etc. running on both servers. I believe I've don everything I need to do to decommission the old server. However if I check the client machines they're still pointed at the old
server name. I changed the IP address for autodiscover to the new server in DNS.
Other than shutting down the old server, is there a method of turning off IIS and Exchange services to force all clients to configure for the new server? I'd rather not just shut down the old server and risk getting a lot of phone calls if there's
something else that needs to be done before uninstalling exchange.

Central Administration links point to wrong server

I have 4 machines in my farm. I used Central Administration - Server - Services on Server to change the location where the Central Administration service runs to a different machine. Now, even though the Central Admin website is running on the new box, the
links in the Health list all point to the old CA server. I can manually open up each list item and ask it to 'Reanalyze' but, once it is done, the links still point to the old server.
What am I missing? Is there a Timer job or Workflow that is supposed to change something. (I am surprised this is using absolute links. Shouldn't SP be putting relative links onto the list?)

Thanks for your reply but unless you have actually done this and seen that the health reports suddenly have a working URL for each of multiple machines then I'm not sure PSConfig is the answer. I was able to turn off the CA service and unprovision one of
the instances with PowerShell. So, the site is working but just not the health links.
This looks like a bug to me. Even if I go through the PSConfig process and add CA to a new server, now how will it know which URL to put into the Health list items? I just really don't want to run PSConfig on a production server unless I really, really have
to. It does more than I want it to.
Can anyone else confirm whether the Health links are broken on some CA machines and not others?

Lync Edge server on windows 2012 R2 prequistes

What, if any, are the perquisites for install lync 2013 edge server on Windows 2012 R2. I have looked around and only found information for Windows 2012 and it requiring WIF 3.5. Is this required for R2 as when you go to install it you get:
is it required and do I require anything else?
Thanks

Hi,
Agree with Georg.
What’s more, you can refer to the link of “Installing Lync 2013 Edge Server”, it is Windows Server 2012 Standard or Datacenter, but similar for Windows Server 2012 R2:
http://www.orcsweb.com/blog/cory-granata/installing-lync-2013-edge-server/
Note: Microsoft is providing this information as a convenience to you. The sites are not controlled by Microsoft. Microsoft cannot make any representations regarding the quality, safety, or suitability of any software or information found there. Please make
sure that you completely understand the risk before retrieving any suggestions from the above link.
If you not choose all required roles and features, when you running Lync Server deployment Wizard and running steps, you will receive error and point out what you need to install.
Best Regards,
Eason Huang
Eason Huang
TechNet Community Support

Server 2008R2 - Windows cannot log you on because your profile cannot be loaded

Hi guys.
I have a server SEXXX01 - Windows 2008 R2 OS.
Im having major issues to login to this server.
This was reveled when a person tried to login to the server and got the error "Cannot log you in, unable to load profile"
What we did was to remove the account, completly, we did this manually aswell(not very smart I know).
We also removed the registy profile.
But. Now no new accounts can be made to login. The old "local accounts" can still login, but no new ones.
You cant even create a new user in AD, add that user to the server. It still gives the same error.
I have an admin account that still is avaible to login. But no other accounts are able to.
When I create a new account, no folders are created, no register path is created.
The weird part is that I created a temp-admin account on the server and it worked for a little while yesterday, out of the blue(no changed were made). But now its back to not working again
This is what I have done so far:
I have checked the register for S-I-D numbers that might be faulty, but there are none for the new accounts that are made or for the original account that failed.
Tried to add new accounts as administrators, still the same problem.
checked if there is a problem with the "default user" folders, none at all.
Added, removed, changed the rights for the accounts.
Looked at the local GPO, nothing weird
This is the error msgs I get from the event viewer:
event ID: 1500
Windows cannot log you on because your profile cannot be loaded. Check that you are connected to the network, and that your network is functioning correctly.
DETAIL - The system cannot find the file specified.
Event ID: 1500
Windows cannot log you on because your profile cannot be loaded. Check that you are connected to the network, and that your network is functioning correctly.
DETAIL - System could not allocate the required space in a registry log.
Event ID: 1500
Windows cannot log you on because your profile cannot be loaded. Check that you are connected to the network, and that your network is functioning correctly.
DETAIL - Insufficient system resources exist to complete the requested service.
Event ID: 1508
Windows was unable to load the registry. This problem is often caused by insufficient memory or insufficient security rights.
DETAIL - Insufficient system resources exist to complete the requested service.
for C:\Users\XXXXX\ntuser.dat
The errors with the system resources seems weird. The server has 16GB of ram and not even 30% is used at this time.
So what could it be?
Why doesnt the server created user folders/registery files for new users?
Why does it give error about resources allocation, when it has more then enough?
Im just at the dead end. I have no idea how to proceed.
All help is very appriciated.
Regards
Me

See if any of the suggestions discussed in similar thread helps
http://answers.microsoft.com/en-us/windows/forum/windows_7-security/error-windows-cannot-log-you-on-because-your/e30ad127-d9fd-48b1-b1e9-f2b60b01167f
I have unmarked your previous post as an answer since issue still persists.
Regards, Santosh
I do not represent the organisation I work for, all the opinions expressed here are my own.
This posting is provided "AS IS" with no warranties or guarantees and confers no rights.
Whenever you see a helpful reply, click on Vote As Helpful & click on
Mark As Answer if a post answers your question.

Windows 7 clients not Reporting Status to WSUS (downstream server) server running Windows 2012 R2

We have recently upgraded our WSUS server to Windows 2012 R2. Now none of the PCs reporting their status to the WSUS server and not getting updates at all. The PCs are contacting the Server but not reporting their status. Stopped the Firewall on Client and
Server. BITS and windows updates services are running.
Record the system time of the Windows 7 client.
Reboot the Windows 7 client.
Run this command from a command prompt: wuauclt /resetauthorization /detectnow.
Wait =30= minutes.
Performed the above steps. Please see the updates logs from a client.
2015-03-16 12:48:44:617
1040 15a4
Shutdwn user declined update at shutdown
2015-03-16 12:48:44:617
1040 15a4
AU Successfully wrote event for AU health state:0
2015-03-16 12:48:44:618
1040 15a4
AU AU initiates service shutdown
2015-03-16 12:48:44:649
1040 15a4
AU ########### AU: Uninitializing Automatic Updates ###########
2015-03-16 12:48:46:506
1040 15a4
Report CWERReporter finishing event handling. (00000000)
2015-03-16 12:48:46:584
1040 15a4
Service *********
2015-03-16 12:48:46:584
1040 15a4
Service ** END ** Service: Service exit [Exit code = 0x240001]
2015-03-16 12:48:46:584
1040 15a4
Service *************
2015-03-16 12:54:23:139
1024 1060
Misc =========== Logging initialized (build: 7.6.7600.320, tz: -0400) ===========
2015-03-16 12:54:23:214
1024 1060
Misc = Process: C:\Windows\system32\svchost.exe
2015-03-16 12:54:23:264
1024 1060
Misc = Module: c:\windows\system32\wuaueng.dll
2015-03-16 12:54:23:139
1024 1060
Service *************
2015-03-16 12:54:23:264
1024 1060
Service ** START ** Service: Service startup
2015-03-16 12:54:23:265
1024 1060
Service *********
2015-03-16 12:54:24:262
1024 1060
Agent * WU client version 7.6.7600.320
2015-03-16 12:54:24:263
1024 1060
Agent * Base directory: C:\Windows\SoftwareDistribution
2015-03-16 12:54:24:272
1024 1060
Agent * Access type: No proxy
2015-03-16 12:54:24:532
1024 1060
Agent * Network state: Connected
2015-03-16 12:55:17:235
1024 1060
Report CWERReporter::Init succeeded
2015-03-16 12:55:17:235
1024 1060
Agent *********** Agent: Initializing Windows Update Agent ***********
2015-03-16 12:55:17:235
1024 1060
Agent * Prerequisite roots succeeded.
2015-03-16 12:55:17:235
1024 1060
Agent *********** Agent: Initializing global settings cache ***********
2015-03-16 12:55:17:235
1024 1060
Agent * WSUS server: http://ewd-srv-01.resultstel.net:8530
2015-03-16 12:55:17:235
1024 1060
Agent * WSUS status server: http://ewd-srv-01.resultstel.net:8530
2015-03-16 12:55:17:235
1024 1060
Agent * Target group: Eastwood
2015-03-16 12:55:17:235
1024 1060
Agent * Windows Update access disabled: No
2015-03-16 12:55:17:247
1024 1060
DnldMgr Download manager restoring 0 downloads
2015-03-16 12:55:17:248
1024 1060
AU ########### AU: Initializing Automatic Updates ###########
2015-03-16 12:55:17:249
1024 1060
AU # WSUS server: http://ewd-srv-01.resultstel.net:8530
2015-03-16 12:55:17:249
1024 1060
AU # Detection frequency: 22
2015-03-16 12:55:17:249
1024 1060
AU # Target group: Eastwood
2015-03-16 12:55:17:249
1024 1060
AU # Approval type: Scheduled (Policy)
2015-03-16 12:55:17:249
1024 1060
AU # Scheduled install day/time: Every day at 3:00
2015-03-16 12:55:17:249
1024 1060
AU # Auto-install minor updates: Yes (Policy)
2015-03-16 12:55:17:249
1024 1060
AU # Will interact with non-admins (Non-admins are elevated (User preference))
2015-03-16 12:55:17:249
1024 1060
AU # Will display featured software notifications (User preference)
2015-03-16 12:55:17:259
1024 1060
Agent Switching to hardware-verified ClientId.
2015-03-16 12:55:17:260
1024 1060
AU Setting AU scheduled install time to 2015-03-17 07:00:00
2015-03-16 12:55:17:402
1024 1060
Report *********** Report: Initializing static reporting data ***********
2015-03-16 12:55:17:402
1024 1060
Report * OS Version = 6.1.7601.1.0.65792
2015-03-16 12:55:17:402
1024 1060
Report * OS Product Type = 0x00000030
2015-03-16 12:55:17:600
1024 1060
Report WARNING: Failed to load reporting information from WMI with hr = 80041002.
2015-03-16 12:55:17:601
1024 1060
Report * Locale ID = 1033
2015-03-16 12:55:17:654
1024 1060
AU Successfully wrote event for AU health state:0
2015-03-16 12:55:17:655
1024 1060
AU Initializing featured updates
2015-03-16 12:55:17:655
1024 1060
AU Found 0 cached featured updates
2015-03-16 12:55:17:655
1024 1060
AU Successfully wrote event for AU health state:0
2015-03-16 12:55:17:656
1024 1060
AU Successfully wrote event for AU health state:0
2015-03-16 12:55:17:656
1024 1060
AU AU finished delayed initialization
2015-03-16 12:55:23:261
1024 1194
Report CWERReporter finishing event handling. (00000000)
2015-03-16 12:55:41:121
1024 1074
AU Triggering AU detection through DetectNow API
2015-03-16 12:55:41:122
1024 1074
AU Triggering Online detection (non-interactive)
2015-03-16 12:55:41:193
1024 1060
AU #############
2015-03-16 12:55:41:193
1024 1060
AU ## START ## AU: Search for updates
2015-03-16 12:55:41:193
1024 1060
AU #########
2015-03-16 12:55:41:218
1024 1060
AU <<## SUBMITTED ## AU: Search for updates [CallId = {6382DEFC-F99E-4A2A-B104-48CF9BE2D760}]
2015-03-16 12:55:41:218
1024 1194
Agent *************
2015-03-16 12:55:41:218
1024 1194
Agent ** START ** Agent: Finding updates [CallerId = AutomaticUpdates]
2015-03-16 12:55:41:218
1024 1194
Agent *********
2015-03-16 12:55:41:218
1024 1194
Agent * Online = Yes; Ignore download priority = No
2015-03-16 12:55:41:218
1024 1194
Agent * Criteria = "IsInstalled=0 and DeploymentAction='Installation' or IsPresent=1 and DeploymentAction='Uninstallation' or IsInstalled=1 and DeploymentAction='Installation' and RebootRequired=1 or IsInstalled=0
and DeploymentAction='Uninstallation' and RebootRequired=1"
2015-03-16 12:55:41:218
1024 1194
Agent * ServiceID = {3DA21691-E39D-4DA6-8A4B-B43877BCB1B7} Managed
2015-03-16 12:55:41:218
1024 1194
Agent * Search Scope = {Machine}
2015-03-16 12:55:41:218
1024 1194
Setup Checking for agent SelfUpdate
2015-03-16 12:55:41:219
1024 1194
Setup Client version: Core: 7.6.7600.320 Aux: 7.6.7600.320
2015-03-16 12:55:45:440
1024 1194
Misc Validating signature for C:\Windows\SoftwareDistribution\SelfUpdate\wuident.cab with dwProvFlags 0x00000080:
2015-03-16 12:55:45:893
1024 1194
Misc Microsoft signed: NA
2015-03-16 12:55:45:897
1024 1194
Misc Validating signature for C:\Windows\SoftwareDistribution\SelfUpdate\TMPD98D.tmp with dwProvFlags 0x00000080:
2015-03-16 12:55:45:979
1024 1194
Misc Microsoft signed: NA
2015-03-16 12:55:46:014
1024 1194
Misc Validating signature for C:\Windows\SoftwareDistribution\SelfUpdate\wsus3setup.cab with dwProvFlags 0x00000080:
2015-03-16 12:55:46:019
1024 1194
Misc Microsoft signed: NA
2015-03-16 12:55:46:050
1024 1194
Misc Validating signature for C:\Windows\SoftwareDistribution\SelfUpdate\wsus3setup.cab with dwProvFlags 0x00000080:
2015-03-16 12:55:46:055
1024 1194
Misc Microsoft signed: NA
2015-03-16 12:55:46:093
1024 1194
Setup Determining whether a new setup handler needs to be downloaded
2015-03-16 12:55:46:093
1024 1194
Setup SelfUpdate handler is not found. It will be downloaded
2015-03-16 12:55:46:093
1024 1194
Setup Evaluating applicability of setup package "WUClient-SelfUpdate-ActiveX~31bf3856ad364e35~x86~~7.6.7600.320"
2015-03-16 12:55:52:237
1024 1194
Setup Setup package "WUClient-SelfUpdate-ActiveX~31bf3856ad364e35~x86~~7.6.7600.320" is already installed.
2015-03-16 12:55:52:237
1024 1194
Setup Evaluating applicability of setup package "WUClient-SelfUpdate-Aux-TopLevel~31bf3856ad364e35~x86~~7.6.7600.320"
2015-03-16 12:55:53:377
1024 1194
Setup Setup package "WUClient-SelfUpdate-Aux-TopLevel~31bf3856ad364e35~x86~~7.6.7600.320" is already installed.
2015-03-16 12:55:53:502
1024 1194
Setup Evaluating applicability of setup package "WUClient-SelfUpdate-Core-TopLevel~31bf3856ad364e35~x86~~7.6.7600.320"
2015-03-16 12:55:56:705
1024 1194
Setup Setup package "WUClient-SelfUpdate-Core-TopLevel~31bf3856ad364e35~x86~~7.6.7600.320" is already installed.
2015-03-16 12:55:56:896
1024 1194
Setup SelfUpdate check completed. SelfUpdate is NOT required.
2015-03-16 12:56:01:618
1024 1060
AU AU received policy change subscription event
2015-03-16 13:00:00:824
1024 1194
PT +++++++++++ PT: Synchronizing server updates +++++++++++
2015-03-16 13:00:00:824
1024 1194
PT + ServiceId = {3DA21691-E39D-4DA6-8A4B-B43877BCB1B7}, Server URL = http://ewd-srv-01.resultstel.net:8530/ClientWebService/client.asmx
2015-03-16 13:00:01:001
1024 1194
PT WARNING: PTError: 0x80041002
2015-03-16 13:00:01:001
1024 1194
PT Initializing simple targeting cookie, clientId = f86ac648-7394-46eb-8f40-eb605f77d86b, target group = Eastwood, DNS name = ewd-wc-420-235.resultstel.net
2015-03-16 13:00:01:001
1024 1194
PT Server URL = http://ewd-srv-01.resultstel.net:8530/SimpleAuthWebService/SimpleAuth.asmx
2015-03-16 13:00:01:833
1024 1194
Agent WARNING: Failed to evaluate Installed rule, updateId = {F92A18E7-8784-4828-89C9-F80085A422A7}.202, hr = 80041002
2015-03-16 13:00:02:004
1024 1194
Agent WARNING: Failed to evaluate Installed rule, updateId = {C735DBB1-06B4-49F2-815F-97976B4B86A4}.102, hr = 80041002
2015-03-16 13:00:08:676
1024 1194
Agent WARNING: Failed to evaluate Installed rule, updateId = {6A8FE277-1048-48B1-803B-4580C15BBDF1}.100, hr = 80041002
2015-03-16 13:07:37:795
1024 1194
PT +++++++++++ PT: Synchronizing extended update info +++++++++++
2015-03-16 13:07:37:795
1024 1194
PT + ServiceId = {3DA21691-E39D-4DA6-8A4B-B43877BCB1B7}, Server URL = http://ewd-srv-01.resultstel.net:8530/ClientWebService/client.asmx
2015-03-16 13:07:37:988
1024 1194
PT WARNING: PTError: 0x80041002
2015-03-16 13:07:41:893
1024 1194
PT WARNING: GetExtendedUpdateInfo failure, error = 0x8024400E, soap client error = 7, soap error code = 400, HTTP status code = 200
2015-03-16 13:07:41:893
1024 1194
PT WARNING: SOAP Fault: 0x000190
2015-03-16 13:07:41:893
1024 1194
PT WARNING: faultstring:Fault occurred
2015-03-16 13:07:41:893
1024 1194
PT WARNING: ErrorCode:InternalServerError(5)
2015-03-16 13:07:41:893
1024 1194
PT WARNING: Message:(null)
2015-03-16 13:07:41:893
1024 1194
PT WARNING: Method:"http://www.microsoft.com/SoftwareDistribution/Server/ClientWebService/GetExtendedUpdateInfo"
2015-03-16 13:07:41:893
1024 1194
PT WARNING: ID:4cd69d60-d69b-4591-88ad-5687cdda3265
2015-03-16 13:07:41:893
1024 1194
PT WARNING: PTError: 0x8024400e
2015-03-16 13:07:41:893
1024 1194
PT WARNING: GetExtendedUpdateInfo_WithRecovery: 0x8024400e
2015-03-16 13:07:41:893
1024 1194
PT WARNING: Sync of Extended Info: 0x8024400e
2015-03-16 13:07:41:893
1024 1194
PT WARNING: SyncServerUpdatesInternal failed : 0x8024400e
2015-03-16 13:07:41:914
1024 1194
Agent * WARNING: Exit code = 0x8024400E
2015-03-16 13:07:41:914
1024 1194
Agent *********
2015-03-16 13:07:41:914
1024 1194
Agent ** END ** Agent: Finding updates [CallerId = AutomaticUpdates]
2015-03-16 13:07:41:914
1024 1194
Agent *************
2015-03-16 13:07:41:914
1024 1194
Agent WARNING: WU client failed Searching for update with error 0x8024400e
2015-03-16 13:07:41:929
1024 1194
Report CWERReporter finishing event handling. (00000000)
2015-03-16 13:07:41:929
1024 1194
Report CWERReporter finishing event handling. (00000000)
2015-03-16 13:07:41:929
1024 1194
Report CWERReporter finishing event handling. (00000000)
2015-03-16 13:07:41:929
1024 1194
Report CWERReporter finishing event handling. (00000000)
2015-03-16 13:07:41:929
1024 1194
Report CWERReporter finishing event handling. (00000000)
2015-03-16 13:07:41:929
1024 1194
Report CWERReporter finishing event handling. (00000000)
2015-03-16 13:07:41:930
1024 1194
Report CWERReporter finishing event handling. (00000000)
2015-03-16 13:07:41:930
1024 1194
Report CWERReporter finishing event handling. (00000000)
2015-03-16 13:07:42:021
1024 14f4
AU >>## RESUMED ## AU: Search for updates [CallId = {6382DEFC-F99E-4A2A-B104-48CF9BE2D760}]
2015-03-16 13:07:42:021
1024 14f4
AU # WARNING: Search callback failed, result = 0x8024400E
2015-03-16 13:07:42:021
1024 14f4
AU # WARNING: Failed to find updates with error code 8024400E
2015-03-16 13:07:42:021
1024 14f4
AU #########
2015-03-16 13:07:42:021
1024 14f4
AU ## END ## AU: Search for updates [CallId = {6382DEFC-F99E-4A2A-B104-48CF9BE2D760}]
2015-03-16 13:07:42:021
1024 14f4
AU #############
2015-03-16 13:07:42:021
1024 14f4
AU Successfully wrote event for AU health state:0
2015-03-16 13:07:42:021
1024 14f4
AU AU setting next detection timeout to 2015-03-16 22:07:42
2015-03-16 13:07:42:022
1024 14f4
AU Setting AU scheduled install time to 2015-03-17 07:00:00
2015-03-16 13:07:42:022
1024 14f4
AU Successfully wrote event for AU health state:0
2015-03-16 13:07:42:022
1024 14f4
AU Successfully wrote event for AU health state:0
2015-03-16 13:07:46:919
1024 1194
Report REPORT EVENT: {CB48FD20-D762-4E5E-8CCA-5C27F3CFA04A}
2015-03-16 13:07:41:913-0400 1
148 101
{00000000-0000-0000-0000-000000000000}
0 8024400e
AutomaticUpdates Failure
Software Synchronization Windows Update Client failed to detect with error 0x8024400e.
2015-03-16 13:07:47:022
1024 1194
Report CWERReporter::HandleEvents - WER report upload completed with status 0x8
2015-03-16 13:07:47:022
1024 1194
Report WER Report sent: 7.6.7600.320 0x8024400e 00000000-0000-0000-0000-000000000000 Scan 101 Managed
2015-03-16 13:07:47:022
1024 1194
Report CWERReporter finishing event handling. (00000000)
2015-03-16 13:14:23:923
1024 1194
PT WARNING: PTError: 0x80041002
2015-03-16 13:14:23:923
1024 1194
Report Uploading 1 events using cached cookie, reporting URL = http://ewd-srv-01.resultstel.net:8530/ReportingWebService/ReportingWebService.asmx

Don thank you for the reply.
But I do have the same issue on the other PCs as well on which WMI is good. And also i pointed the above PC to my primary WSUS server which is running windows 2003 and it reported successfully and downloaded the approved updates.
please see the below logs from the same PC after pointing to our wsus running on win2003.
2015-03-17 14:41:08:507
1020 f1c
Inv   # Talking to WSUS server = http://atl-wsus-1:8530
2015-03-17 14:41:08:508
1020 f1c
Inv   # Downloading Rule file from = http://atl-wsus-1:8530/Inventory/InventoryRules.cab
2015-03-17 14:41:08:508
1020 53c
AU #########
2015-03-17 14:41:08:508
1020 53c
AU ## END ## AU: Search for updates [CallId = {54490DE2-CF7B-4017-A553-6C8C1532E621}]
2015-03-17 14:41:08:508
1020 53c
AU #############
2015-03-17 14:41:08:510
1020 53c
AU Successfully wrote event for AU health state:0
2015-03-17 14:41:08:510
1020 53c
AU Featured notifications is disabled.
2015-03-17 14:41:08:510
1020 53c
AU AU setting next detection timeout to 2015-03-18 16:13:54
2015-03-17 14:41:08:510
1020 53c
AU Setting AU scheduled install time to 2015-03-18 07:00:00
2015-03-17 14:41:08:510
1020 53c
AU Successfully wrote event for AU health state:0
2015-03-17 14:41:08:510
1020 53c
AU Auto-approving update for download, updateId = {58406504-5709-46CA-BB54-3FE9628545AA}.202, ForUx=0, IsOwnerUx=0, HasDeadline=0, IsMinor=0
2015-03-17 14:41:08:510
1020 53c
AU Auto-approving update for download, updateId = {B9D0F709-E6A7-4383-AFB3-E35FB9CB0AAA}.203, ForUx=0, IsOwnerUx=0, HasDeadline=0, IsMinor=0
2015-03-17 14:41:08:510
1020 53c
AU Auto-approving update for download, updateId = {2CA8E6E8-FC4A-4974-A208-18CDF1D01D86}.203, ForUx=0, IsOwnerUx=0, HasDeadline=0, IsMinor=0
2015-03-17 14:41:08:510
1020 53c
AU Auto-approving update for download, updateId = {6C2547EE-DC7B-4080-8884-A040572C5EC4}.204, ForUx=0, IsOwnerUx=0, HasDeadline=0, IsMinor=0
2015-03-17 14:41:08:510
1020 53c
AU Auto-approving update for download, updateId = {673027F3-841E-4215-88BE-A0BFB456B2B1}.207, ForUx=0, IsOwnerUx=0, HasDeadline=0, IsMinor=0
2015-03-17 14:41:08:510
1020 53c
AU Auto-approved 5 update(s) for download (NOT for Ux)
2015-03-17 14:41:08:510
1020 53c
AU #############
2015-03-17 14:41:08:511
1020 53c
AU ## START ## AU: Download updates
2015-03-17 14:41:08:511
1020 53c
AU #########
2015-03-17 14:41:08:511
1020 53c
AU   # Approved updates = 5
2015-03-17 14:41:08:512
1020 53c
AU AU initiated download, updateId = {58406504-5709-46CA-BB54-3FE9628545AA}.202, callId = {F3389077-03F0-4625-83EF-CAAEBA8ED147}
2015-03-17 14:41:08:513
1020 53c
AU AU initiated download, updateId = {B9D0F709-E6A7-4383-AFB3-E35FB9CB0AAA}.203, callId = {B94BF4E5-5709-4D22-924A-5C5B8D4712C9}
2015-03-17 14:41:08:514
1020 53c
AU AU initiated download, updateId = {2CA8E6E8-FC4A-4974-A208-18CDF1D01D86}.203, callId = {D330B2E0-CA38-4ED9-894A-36717C01F09A}
2015-03-17 14:41:08:515
1020 53c
AU AU initiated download, updateId = {6C2547EE-DC7B-4080-8884-A040572C5EC4}.204, callId = {B6B35AC2-9BC1-4CFA-8421-D666C79464AD}
2015-03-17 14:41:08:516
1020 53c
AU AU initiated download, updateId = {673027F3-841E-4215-88BE-A0BFB456B2B1}.207, callId = {F0D00A6F-36BC-4680-9BE4-4005742A2C93}
2015-03-17 14:41:08:516
1020 53c
AU Setting AU scheduled install time to 2015-03-18 07:00:00
2015-03-17 14:41:08:516
1020 53c
AU Successfully wrote event for AU health state:0
2015-03-17 14:41:08:516
1020 53c
AU AU setting pending client directive to 'Download Progress'
2015-03-17 14:41:08:518
1020 53c
AU Successfully wrote event for AU health state:0
2015-03-17 14:41:08:518
1020 53c
AU   # Pending download calls = 5
2015-03-17 14:41:08:518
1020 53c
AU <<## SUBMITTED ## AU: Download updates
2015-03-17 14:41:08:520
1020 53c
AU Successfully wrote event for AU health state:0
2015-03-17 14:41:08:964
1020 f1c
Misc Validating signature for C:\Windows\SoftwareDistribution\Inventory\InventoryRule\InventoryRules.cab with dwProvFlags 0x00000080:
2015-03-17 14:41:08:976
1020 f1c
Misc Microsoft signed: NA
2015-03-17 14:41:08:993
1020 f1c
Inv   # Inventory Rule id = 8226C3A1-70D4-4848-B441-1555AC820A23, version = 1.0
2015-03-17 14:41:09:022
1020 f1c
Inv WARNING: Inventory: Failed to connect to the root\cimv2 namespace 0x80041002
2015-03-17 14:41:09:086
1020 f1c
Inv WARNING: Inventory: Failed to connect to the root\cimv2 namespace 0x80041002
2015-03-17 14:41:09:118
1020 f1c
Inv WARNING: Inventory: Failed to connect to the root\cimv2 namespace 0x80041002
2015-03-17 14:41:09:150
1020 f1c
Inv WARNING: Inventory: Failed to connect to the root\cimv2 namespace 0x80041002
2015-03-17 14:41:09:182
1020 f1c
Inv WARNING: Inventory: Failed to connect to the root\cimv2 namespace 0x80041002
2015-03-17 14:41:09:214
1020 f1c
Inv WARNING: Inventory: Failed to connect to the root\cimv2 namespace 0x80041002
2015-03-17 14:41:09:246
1020 f1c
Inv WARNING: Inventory: Failed to connect to the root\cimv2 namespace 0x80041002
2015-03-17 14:41:09:278
1020 f1c
Inv WARNING: Inventory: Failed to connect to the root\cimv2 namespace 0x80041002
2015-03-17 14:41:09:310
1020 f1c
Inv WARNING: Inventory: Failed to connect to the root\cimv2 namespace 0x80041002
2015-03-17 14:41:09:342
1020 f1c
Inv WARNING: Inventory: Failed to connect to the root\cimv2 namespace 0x80041002
2015-03-17 14:41:09:374
1020 f1c
Inv WARNING: Inventory: Failed to connect to the root\cimv2 namespace 0x80041002
2015-03-17 14:41:09:406
1020 f1c
Inv WARNING: Inventory: Failed to connect to the root\cimv2 namespace 0x80041002
2015-03-17 14:41:09:438
1020 f1c
Inv WARNING: Inventory: Failed to connect to the root\cimv2 namespace 0x80041002
2015-03-17 14:41:09:471
1020 f1c
PT WARNING: PTError: 0x80041002
2015-03-17 14:41:10:590
1020 f1c
Inv #########
2015-03-17 14:41:10:590
1020 f1c
Inv ## END ## Inv: Inventory Collection
2015-03-17 14:41:10:590
1020 f1c
Inv #############
2015-03-17 14:41:10:592
1020 f1c
DnldMgr *************
2015-03-17 14:41:10:592
1020 f1c
DnldMgr ** START ** DnldMgr: Downloading updates [CallerId = AutomaticUpdates]
2015-03-17 14:41:10:592
1020 f1c
DnldMgr *********
2015-03-17 14:41:10:592
1020 f1c
DnldMgr   * Call ID = {F3389077-03F0-4625-83EF-CAAEBA8ED147}
2015-03-17 14:41:10:592
1020 f1c
DnldMgr   * Priority = 2, Interactive = 0, Owner is system = 1, Explicit proxy = 0, Proxy session id = -1, ServiceId = {3DA21691-E39D-4DA6-8A4B-B43877BCB1B7}
2015-03-17 14:41:10:592
1020 f1c
DnldMgr   * Updates to download = 1
2015-03-17 14:41:10:592
1020 f1c
Agent   * Title = Security Update for Windows 7 (KB3029944)
2015-03-17 14:41:10:592
1020 f1c
Agent   * UpdateId = {58406504-5709-46CA-BB54-3FE9628545AA}.202
2015-03-17 14:41:10:592
1020 f1c
Agent   * Bundles 1 updates:
2015-03-17 14:41:10:592
1020 f1c
Agent   * {CF9A0A9F-EA32-4B84-8B11-647F8DE3432C}.202
2015-03-17 14:41:10:598
1020 f1c
DnldMgr *********** DnldMgr: New download job [UpdateId = {CF9A0A9F-EA32-4B84-8B11-647F8DE3432C}.202] ***********
2015-03-17 14:41:10:599
1020 f1c
DnldMgr   * Queueing update for download handler request generation.
2015-03-17 14:41:10:599
1020 f1c
DnldMgr Generating download request for update {CF9A0A9F-EA32-4B84-8B11-647F8DE3432C}.202
2015-03-17 14:41:13:863
1020 f1c
Handler Generating request for CBS update CF9A0A9F-EA32-4B84-8B11-647F8DE3432C in sandbox C:\Windows\SoftwareDistribution\Download\4fa5441bcc144c4a7917304858841f6b
2015-03-17 14:41:13:863
1020 f1c
Handler Selected payload type is ptExpress
2015-03-17 14:41:13:863
1020 f1c
Handler Detected download state is dsStart
2015-03-17 14:41:13:863
1020 f1c
Handler Adding windows6.1-kb3029944-x86-express.cab (entire file) to request list.
2015-03-17 14:41:13:864
1020 f1c
Handler Request generation for CBS update complete with hr=0x0 and pfResetSandbox=0
2015-03-17 14:41:13:864
1020 f1c
DnldMgr *********** DnldMgr: New download job [UpdateId = {CF9A0A9F-EA32-4B84-8B11-647F8DE3432C}.202] ***********
2015-03-17 14:41:16:436
1020 f1c
DnldMgr   * BITS job initialized, JobId = {675985CD-3133-4157-9D02-06CC33C29C49}
2015-03-17 14:41:16:473
1020 f1c
DnldMgr   * Downloading from http://wsus.ds.download.windowsupdate.com/c/msdownload/update/software/secu/2015/01/windows6.1-kb3029944-x86-express_0c21886fd0931285b2d3a29773d3673c947f60b3.cab to C:\Windows\SoftwareDistribution\Download\4fa5441bcc144c4a7917304858841f6b\windows6.1-kb3029944-x86-express.cab
(full file).
2015-03-17 14:41:16:644
1020 f1c
Agent *********
2015-03-17 14:41:16:644
1020 f1c
Agent ** END ** Agent: Downloading updates [CallerId = AutomaticUpdates]
2015-03-17 14:41:16:644
1020 f1c
Agent *************
2015-03-17 14:41:16:645
1020 f1c
DnldMgr *************
2015-03-17 14:41:16:645
1020 f1c
DnldMgr ** START ** DnldMgr: Downloading updates [CallerId = AutomaticUpdates]
2015-03-17 14:41:16:645
1020 f1c
DnldMgr *********
2015-03-17 14:41:16:645
1020 f1c
DnldMgr   * Call ID = {B94BF4E5-5709-4D22-924A-5C5B8D4712C9}
2015-03-17 14:41:16:645
1020 f1c
DnldMgr   * Priority = 2, Interactive = 0, Owner is system = 1, Explicit proxy = 0, Proxy session id = -1, ServiceId = {3DA21691-E39D-4DA6-8A4B-B43877BCB1B7}
2015-03-17 14:41:16:645
1020 f1c
DnldMgr   * Updates to download = 1
2015-03-17 14:41:16:645
1020 f1c
Agent   * Title = Security Update for Windows 7 (KB3004361)
2015-03-17 14:41:16:645
1020 f1c
Agent   * UpdateId = {B9D0F709-E6A7-4383-AFB3-E35FB9CB0AAA}.203
2015-03-17 14:41:16:645
1020 f1c
Agent   * Bundles 1 updates:
2015-03-17 14:41:16:645
1020 f1c
Agent   * {151B27A0-4EA8-428F-BE06-C90A3CF0C2CA}.203
2015-03-17 14:41:16:648
1020 f1c
DnldMgr *********** DnldMgr: New download job [UpdateId = {151B27A0-4EA8-428F-BE06-C90A3CF0C2CA}.203] ***********
2015-03-17 14:41:16:649
1020 f1c
DnldMgr   * Queueing update for download handler request generation.
2015-03-17 14:41:16:649
1020 f1c
DnldMgr Generating download request for update {151B27A0-4EA8-428F-BE06-C90A3CF0C2CA}.203
2015-03-17 14:41:16:678
1020 f1c
Handler Generating request for CBS update 151B27A0-4EA8-428F-BE06-C90A3CF0C2CA in sandbox C:\Windows\SoftwareDistribution\Download\963019da42f4a0388fdc4337be401b25
2015-03-17 14:41:16:678
1020 f1c
Handler Selected payload type is ptExpress
2015-03-17 14:41:16:678
1020 f1c
Handler Detected download state is dsStart
2015-03-17 14:41:16:678
1020 f1c
Handler Adding windows6.1-kb3004361-x86-express.cab (entire file) to request list.
2015-03-17 14:41:16:687
1020 f1c
Handler Request generation for CBS update complete with hr=0x0 and pfResetSandbox=0
2015-03-17 14:41:16:687
1020 f1c
DnldMgr *********** DnldMgr: New download job [UpdateId = {151B27A0-4EA8-428F-BE06-C90A3CF0C2CA}.203] ***********
2015-03-17 14:41:16:732
1020 f1c
DnldMgr   * BITS job initialized, JobId = {27F85F04-0E56-4BFA-93E3-4D6BCB3ECB4F}
2015-03-17 14:41:16:758
1020 f1c
DnldMgr   * Downloading from http://wsus.ds.download.windowsupdate.com/c/msdownload/update/software/secu/2014/12/windows6.1-kb3004361-x86-express_47f37958063afd2521ca42de8904b55d1aa85b89.cab to C:\Windows\SoftwareDistribution\Download\963019da42f4a0388fdc4337be401b25\windows6.1-kb3004361-x86-express.cab
(full file).
2015-03-17 14:41:16:809
1020 f1c
Agent *********
2015-03-17 14:41:16:809
1020 f1c
Agent ** END ** Agent: Downloading updates [CallerId = AutomaticUpdates]
2015-03-17 14:41:16:809
1020 f1c
Agent *************
2015-03-17 14:41:16:811
1020 f1c
DnldMgr *************
2015-03-17 14:41:16:811
1020 f1c
DnldMgr ** START ** DnldMgr: Downloading updates [CallerId = AutomaticUpdates]
2015-03-17 14:41:16:811
1020 f1c
DnldMgr *********
2015-03-17 14:41:16:811
1020 f1c
DnldMgr   * Call ID = {D330B2E0-CA38-4ED9-894A-36717C01F09A}
2015-03-17 14:41:16:811
1020 f1c
DnldMgr   * Priority = 2, Interactive = 0, Owner is system = 1, Explicit proxy = 0, Proxy session id = -1, ServiceId = {3DA21691-E39D-4DA6-8A4B-B43877BCB1B7}
2015-03-17 14:41:16:811
1020 f1c
DnldMgr   * Updates to download = 1
2015-03-17 14:41:16:811
1020 f1c
Agent   * Title = Security Update for Windows 7 (KB3031432)
2015-03-17 14:41:16:811
1020 f1c
Agent   * UpdateId = {2CA8E6E8-FC4A-4974-A208-18CDF1D01D86}.203
2015-03-17 14:41:16:811
1020 f1c
Agent   * Bundles 1 updates:
2015-03-17 14:41:16:811
1020 f1c
Agent   * {EE556F37-7EAC-42B3-BD29-653F98E6E364}.203
2015-03-17 14:41:16:814
1020 f1c
DnldMgr *********** DnldMgr: New download job [UpdateId = {EE556F37-7EAC-42B3-BD29-653F98E6E364}.203] ***********
2015-03-17 14:41:16:815
1020 f1c
DnldMgr   * Queueing update for download handler request generation.
2015-03-17 14:41:16:815
1020 f1c
DnldMgr Generating download request for update {EE556F37-7EAC-42B3-BD29-653F98E6E364}.203
2015-03-17 14:41:16:843
1020 f1c
Handler Generating request for CBS update EE556F37-7EAC-42B3-BD29-653F98E6E364 in sandbox C:\Windows\SoftwareDistribution\Download\7db602a9c625e53b175ecb83170441ba
2015-03-17 14:41:16:843
1020 f1c
Handler Selected payload type is ptExpress
2015-03-17 14:41:16:843
1020 f1c
Handler Detected download state is dsStart
2015-03-17 14:41:16:843
1020 f1c
Handler Adding windows6.1-kb3031432-x86-express.cab (entire file) to request list.
2015-03-17 14:41:16:844
1020 f1c
Handler Request generation for CBS update complete with hr=0x0 and pfResetSandbox=0
2015-03-17 14:41:16:845
1020 f1c
DnldMgr *********** DnldMgr: New download job [UpdateId = {EE556F37-7EAC-42B3-BD29-653F98E6E364}.203] ***********
2015-03-17 14:41:16:881
1020 f1c
DnldMgr   * BITS job initialized, JobId = {6C5B3B60-DB8B-4B6F-9E40-D99CA43B366D}
2015-03-17 14:41:16:906
1020 f1c
DnldMgr   * Downloading from http://wsus.ds.download.windowsupdate.com/c/msdownload/update/software/secu/2015/01/windows6.1-kb3031432-x86-express_fb5326e90facfe6de39cf44fc4ed5ec630968ba5.cab to C:\Windows\SoftwareDistribution\Download\7db602a9c625e53b175ecb83170441ba\windows6.1-kb3031432-x86-express.cab
(full file).

How do I stop mavericks from looking for an old server and nagging me that it can't find it?

MacBook Air running OS X 10.9.4
Had it set up to connect to my main iMac for shared files. Wife complained that when my iMac wasn't on the MacBook constantly nagged her with a message saying it couldn't connect to the server (my iMac).
Removed sharing on my iMac. Removed recent server list from the MacBook Air. Removed my iMac from the finder side bar in the MacBook. Now the MacBook Air constantly naggs us that it can't find the server (name of my iMac). I just want the @#$@# thing to shut up, quit looking for the iMac and be quiet.
Need help as I can't figure this one out.
PLEASE!!

There are many possible causes for this issue, and it may be hard to resolve. Please take each of the following steps that you haven't already tried. Back up all data before making any changes.
If you get the alert in the login screen before you log in, stop here and ask for instructions.
Step 1
If you get the alert as soon as you log in, it's probably caused by one of your login items or by software that otherwise loads at startup or login. Ask if you need help identifying it. A known offender is "AdobeResourceSynchronizer," which is a component of some Adobe products. See also this discussion.
Step 2
If there's an icon representing the server in the sidebar of a Finder window, hold down the command key and drag it out.
Step 3
In the Finder, press the key combination command-K or select
          Go ▹ Go to Server...
from the menu bar. In the upper right corner of the window that opens is a Recent Servers popup menu represented by a clock icon. From that menu, select
          Clear Recent Servers…
and confirm. Test.
Step 4
Open the Printers & Scanners pane in System Preferences and delete any network devices you no longer use.
Step 5
Triple-click anywhere in the line below on this page to select it, then copy the text to the Clipboard by pressing command-C:
~/Library/PDF Services
In the Finder, select
          Go ▹ Go to Folder...
from the menu bar and paste into the box that opens by pressing command-V. You won't see what you pasted because a line break is included. Press return. A folder may open. If it does, move the contents to the Desktop, or to a new folder on the Desktop. Log out and log back in. Test. If there's no change, put the items you moved back where they were and continue.
Step 6
Open the folder
~/Library/Preferences
as in Step 5 and move the file named "loginwindow.plist" items in that folder to the Trash, if it exists (it may not.)
Log out and back in again, and test.
Step 7
Other possible causes are references in the iPhoto, iTunes, or iMovie library pointing to the server, and bookmarks in the Preview application.
Try rebuilding the iPhoto library.
Step 8
Disconnect all wired peripherals except those needed to start up. Start up in safe mode. Test. After testing, restart as usual (not in safe mode) and verify that you still have the problem.
Note: If FileVault is enabled, or if a firmware password is set, or if the startup volume is a Fusion Drive or a software RAID, you can’t do this. Ask for further instructions.
Step 9
Triple-click the line below to select it:
/System/Library/CoreServices/Directory Utility.app
Rght-click or control-click the highlighted text and select
          Services ▹ Open
from the contextual menu.* The application Directory Utility will open.
In the Directory Utility window, select the Directory Editor tool in the toolbar. Select Mounts from the Viewing menu in the toolbar, and/Local/Default from the node menu, if not already selected. On the right is a list of names and values. By default, the list is empty. If it's not empty, post a screenshot of the window and stop here.
*If you don't see the contextual menu item, copy the selected text to the Clipboard (command-C). Open a TextEdit window and paste into it (command-V). Select the line you just pasted and continue as above.
Step 10
Open the following file as you did in the last step:
/etc/auto_master
It will open in a TextEdit window. The contents should be exactly this:
# Automounter master map
+auto_master          # Use directory service
/net               -hosts          -nobrowse,hidefromfinder,nosuid
/home               auto_home     -nobrowse,hidefromfinder
/Network/Servers     -fstab
/-               -static
If there are any other lines in the window, post them. Otherwise, close the window.

Tns ping pointing to old server in windows

Similar Messages

Maybe you are looking for