To ask only

i was using india unlimited supscription from 6 month why india has been deducted from unlimited supscription i was doing a small bussiness of skype india unlimited now i have too much customer and it has been happen like. Plz reopen india unlimited supcripton. And plz reply me on this email. *removed for privacy*

Hi, imtiyaz006, and welcome to the Community!
First things, first: for your safety and security, please never, ever include personally identifiable information such as an e-mail address or telephone number in a post on a public Community or forum such as this. Thanks!
Please do contact Skype Customer Service to first confirm the subscription was indeed cancelled and is no longer available. (These service plans tend to change faster than I can keep up with them!) The usual reasons for these changes includes prohibitively increasing costs and the inabilty of all parties involved to reach a consensus on how to proceed.
Here is a link to use to reach Skype Customer Service: contact customer service
Best regards,
Elaine
Was your question answered? Please click on the Accept as a Solution link so everyone can quickly find what works! Like a post or want to say, "Thank You" - ?? Click on the Kudos button!
Trustworthy information: Brian Krebs: 3 Basic Rules for Online Safety and Consumer Reports: Guide to Internet Security Online Safety Tip: Change your passwords often!

Similar Messages

I updated the epson printer drivers like it asked, only to find out that my epson 1400 is not compatible on 10.8, the original driver worked fine, but now it prints terrible, how do I re-install back to original?

I updated the epson printer drivers like it asked, only to find out that my epson 1400 is not compatible on 10.8, the original driver worked fine, but now it prints terrible, how do I re-install back to original?

Do you have a TM backup or a clone? If so, erase the drive and restore with TM or clone back.
If not you'll have to reformat and re-install the OS that shipped with your Mac. If it shipped with Lion or ML you can do the restore from your Recovery Volume
EDIT: I assume you are saying that you just installed 10.8?

Transport request for table changes is asked only for first row changed

Hello,
We have created a maintenance dialog connected to a custom table.
In the Table Maintenance Diagog, the Dialog Data Transport Details is set to Standard Recording Routine.
In the "Maintenance Objects" screen, the transport is set to "Automatic transport".
Two questions:
1. Now can I only change the table's entry through SM30? I do not see the "pencil" icon in SM11 or SM16 anymore. Is there a way to change the table's rows in both ways?
2. When I change a row in my table through SM30, the system only asks for the CR number the FIRST time that I savea changed row. When I change other rows and save them, it does not ask for any CR that I want to use for transport. Does it mean that the system automatically knows where to put the transported rows? or that the configuration is wrong and the other changed rows will not be taken into consideration? What if I want to change the CR for only some of the changed rows?
Thank you very much every expert here

HI,
The table should be Customizeed table, i mean in the Attributes of the tabl eput it as C,
1) We can change/Insert the records from SM30, we can not ahve the pencil icon in SE11 or SM16
2) If you put the table type C, then for every entry it should ask the CR, if not then it is moving to the same request automatically
Regards
Sudheer

With a document open password - is there a way to ask only once per session?

Here's my scenario: User is reading a "password to open" document that contains links to other web pages, etc. The user clicks on a link, goes to the new page, then uses the back button/back key to return to the password protected document, where they must type in the password to open again, and must do this every time they click a link then later attempt to return to the document.
Is there a way around the repeated retyping / reentering / rekeying the password? (My guess is no, but I'll ask anyway). The user did type in their password, most of the time just a minute or two earlier, before they clicked on the link in the password protected document.
P.S. I have a couple other questions, indirectly related (byproducts) to this general topic. I'll post those in their appropriate forum, then edit this post with links to those posts. FYI, the other posts are/will be:
Is there a better way than manually adjusting each and every link in a document to use javascript and repeating that process each time the document is updated, to make links open in new windows, (when viewing a pdf from within a browser window). [Edit: here's that link: http://forums.adobe.com/message/5055202#5055202 ]
Is there a way from an html page or from something within a PDF document (at the discretion of the document's author) to open a pdf in the acrobat reader window instead of in the browser, without asking each user to change their reader settings? [Edit: I ended up asking this question in the same post listed above]

Once the instance of Acrobat or Reader containing a password-protected PDF file has been closed, you can't avoid having to re-enter the password. If the links don't target a new tab or window, then the browser will unload the plugin - and aside from changing all the link targets, you can't prevent that.

Asking only once for a parameter...

Post Author: Nightcrawler
CA Forum: Data Connectivity and SQL
Hi,
I have a report which need to select a list of items for a dynamic lookup for the report. I have created two stored procedure in SQL which work in QA. When I link them to a report I get asked for the date range twice. This is because the two stored procedures ask for the date range for them to select data. The parameter names are the same in each stored procedure. Basically I want the screen to ask me for the date range then give me a popup list based on the items. Then pass this to the second stored procedure to run for the report ??
How is best to do this ?
Thanks
Ed

Post Author: Nightcrawler
CA Forum: Data Connectivity and SQL
Hi,
No there are no refs in the section expert. Not sure what you mean by in and out but ? The date is passed to the sp but not returned.
It seems everytime I want to do a dynamic pararmeters for the first sp. It asks me for the varaibles but not the ones listed in field explorer.... IE if I link the field explorer fields for the first sp to the subreport it asks for the date twice ?? Once for the first sp ( I can tell this as it has the name of one of the sp fields in the top right of each question) and then again for the paremeters that are in the field explorer - which I have given a description, thus I can tell there the next set.
Surely thou these first parameters are the same ?? Is there a way of changing the priority...
It seems a complex system for something that should be very simple.
All I want is to pass two date values to have a dynamic list of rooms wchih are valid. Then pass the same date variable and the chosen room to the next sp... but prefrable without the duplicate date asking .....
I've just read the subreport linking docs but its doesnt help as everytime you refernace the parameters from the first sp that are shown in field explorer, it asks duplicate questions.
Just to make this clearer - when I say duplicate questions I mean it is obiviously runs the sp first then for those variables. Then it runs the report and asks for the field explorer variables which it has created when I first referanced the sp. Does this make sense ???
Thanks
Ed

Having trouble installing my licensed LR 5 on a new computer. I have .exe file and also license/serial number. but I am asked only to buy or try.

Old computer died, and I am trying to install LR 5.5 on my new computer. I have run the exe file and have moved all my picture files and the LR data base files to the new computer. When I try to open the program (it is listed in my start menu and is in my system tray, too) a window opens that already shows as selected the option saying I have a license, but there is no way of going forward from that window. I could choose buy or try out or cancel. I'm obviously missing something here and would appreciate any help. Should I perhaps run the exe of LR 5 and then do updates to get to 5.5?
I have checked my Adobe account and LR5 shows as being owned by me. I have NOT downloaded the CC version of LR. I am running Win 7, 64-bit.

Just FYI, apparently, running LR 5 exe works as we would have expected, and
the link to update to 5.5 comes right up when the program is opened. Takes
some time, of course (and wants to create a new catalog as well), but it
does work.
G

HT4236 how can i see if my photos are exported to i tunes?when my device ask only export to itunes and i don't plug it in my computer?

HOw can i see if my pictures are being sync to itunes when i just did is copy to itunes and not plugged my iphone to computer? is there a possibility that it will still sync? even if i don't plug my iphone to computer?

Photos taken with the iphone can be deleted from the iphone itself:
iPhone User Guide (For iOS 5.1 Software)

HT5035 Do itunes deduct money from your account when you redeem a voucher? I ask only because it appears to be doing exactly that to mine, and before anyne asks I was stilll £3 in credit.

Does itunes deduct money from your account when you redeem a voucher, because it seems to hve done exactly that to mine. I had £3 credit but when i added £15 i ws left with less than £18.

First, make sure you're logged into the iTunes Store using the account ID and password you set up, or used, when you redeemed your card/gift. If you are, try signing out of the account and back in.
If you're sure you are using the correct account and that you're signing in to the iTunes Store, and signing out and back in doesn't help, go to the Purchase History:
http://support.apple.com/kb/HT2727
and review your purchases to make sure that you should indeed have the balance left that you think. iTunes doesn't always refresh the balance it shows, so it's possible you spent the money and it just wasn't being reflected in the display. This display error again can usually be corrected by logging out of the iTunes Store and then back in.
If you confirm that you should have a higher balance left but the iTunes Store isn't showing it correctly, go here:
iTunes Support
and follow the instructions to report the issue to the iTunes Store.
Regards.

Asking userid and pwd only in inbox(ESS)..!

HI all,
I am getting a strange error,
Am using ep 6.0 ,r/3 4.7 , ess 50.4
when i click ess -> inbox -> am getting the mails which have been submitted by employees, but once i click "execute" button, then its asking me for r/3 user id and password. We have done usermapping also but still its asking only when we click 'execute' button.
For other services such as 'who's who', 'personal information' its not asking for userid and pwd.
Please can any one tell me wat is the problem.
The error is in production server , so its very critical.. pls help me resolve this issue at the earliest..
Will be eagerly waiting for your positive response.
Thanks & Regards,
Mahesh.M.R

Hi sameer,
No.But we have narrow down the search that, if we open run our bsp application in IE (not thru portal) , for the first time it's asking SAPuserid and password.It's fine.
In systems with Microsoft office2000, the foll are the scenarios...
i navigate thru set of pages, there it's not asking userid and password.It's fine.
when i click file download button,the file is getting open in url.
In systems with Microsoft office2003, the foll are the scenarios...
i navigate thru set of pages, there it's not asking userid and password.It's fine.
when i click file download button,there is a windows popup box saying, do u want to open/save/cancel the file.
*When i click save the file,it's getting saved properly.
*when i click open....here the problem starts.....
'it's asking for sapid and password again.
and file getting opened if i click ok/cancel button.
How to avoid the second time Login prompt?
Rgds,
Jothi.P

RMAN Restore is asking for 3 days tapes in place of 1 day tape

Hi All,
I'm doing oracle disaster recovery through RMAN and VERITAS on Solaris machine. Version detail is as follows:
Oracle: 8i (8.1.7.4)
Veritas: 5.1
Solaris: 8 (5.8)
Script to restore and recover database
run {
allocate channel c1 type 'sbt_tape';
restore database;
recover database;
Daily we are doing full RMAN backup (Level 0). I've restored the catalogs of veritas upto 16th Jan. Catalog Database (RMAN) is upto latest (16th). While restoring, its asking for 3 days tapes (12 Jan,13 Jan,14 Jan). Why it is asking for 3 days tapes and why not it asking only latest tapes that is of 15 th Jan. How can it possible for me to restrict it only one day and that is of choice means if I want to restore/recover until 13 then I should provide tape of 13th Jan only and If I want to recover upto 15th then I should provide tapes of 15th Jan only.
Regards
Rakesh

What do you mean by doing disaster recovery through net vertias ? what made this situtation to accour at your end ? And what are the techniques you are using to accomplish disaster recovery , by seeing your commands i believe it is just a simple restore and recovery .one more thing i like to ask is What do you mean by saying the you restored the catalog to 16th of jan ?
hare krishna
Alok

Twice I've asked Apple Support unsuccessfully to send me the link to updating my account profile

I downloaded Skype for WiFi on my iphone. I was asked for username and password and then two categories containing three options were presented for an answer related to security. I didn't connect Skype with having anything to do with Apple details, so I created new information and answered two questions. The App was successfully uploaded.
Subsequently, something popped up on my iMac computer asking me for my Apple ID and password. These two items were accepted, but when I was asked to answer two security questions, my answers were not accepted. After repeated attempts, I was barred for eight hours to use my account, after which time I could ask for my security questions to be updated, etc. I clicked on the link to Apple for them to send me the link to change my profile details. I did this twice as the first time I did not receive the expected response from Apple i.e. the link to a site where my profile could be updated. Now, the second attempt has failed to deliver this link, although both attempts I got the message "email sent etc...) So Apple, where is it. Can anyone please shed any light on my query or suggest to whom I should turn to for a response. There doesn't seem to be a direct contact for this type of question. Thanks.

Hi to everyone who are trying to help me with my issue, thank you.
First, I don't remember there being a question to provide a back up email address. If there had been I know I would have given my one and only email addres that I have. I was asked only to select the questions for which I would give memorable answers. Now, when I check my information in "Manage My Account" I see that the info there is correct, except for when I click on Password and Security to see what info is there, what I see are the two questions that I was initially asked answers for. I know that the answsers I give are the correct ones, yet I receive the following message: The Authentication Information provided does not match our records. Please verify your personal information and try again. I tried several more times to answer the questions but continued to receive the same response. Finally, I responded to "Forgot your answers?" and clicked on Send reset security info email to pxxx@btinternet. (To be honest, I've only just now realised that ther address was to my service provider, btinternet.com) Even so, I have never received an answer from this email address allowing me to reset my question/answer.
What also confuses me are the number of other Apple users complaining of much the same issue as I have, except that I thought they were referring to Apple when they mention that they too have not had a reply to their request to reset their question/answer.
For want of knowing where to go to next, I tried a Chat call to Mobile Me hoping that they could help. All they could say was that the link Password and Security in "Manage My Account" was an opportunity to reset the question to the answers, which has confused me even more. Help!

Proxy Server asking for username and password almost 6 times for every page I load, but the same doesn't happen with other browsers like chrome

The same question keeps popping up again and again "The proxy moz-proxy://proxy.iitm.ac.in:3128 is requesting a username and password. The site says: "moz-proxy://proxy.iitm.ac.in:3128""
Even after i give the right details, it asks me like 5 more times before it completely loads the page. Some times it happens only 2 times.
With other browsers like chrome, it asks only in the beginning. it doesn't occur after that.
This started occurring only recently. i upgraded to firefox 9.0 and it functioned properly for more than 12 hours before it started occuring. i tried downgrading back to 8.0.1 but the problem still continued.

i'm afraid i need to use proxy settings to connect to internet. The settings are all fine because it used to work properly all this time. i specify the proxy address and the port, which is correct, i am very confident. it is so because the page actually loads on firefox, but not before it asks for my user name and password for it a lot of times, and for every page. for other browsers, it asks only in the beginning, that is, when i start the browser.
i've put three pics here. under the first two settings, the third image showing the user name and password thingy popping up. this happens a lot of times for every page.

TOOL WINDOWS PALETTE showing only pen icon at start up

My tool palette often has every tool icons in it disapear except the PEN tool. The way I've found to make them re-appear is to unattach palette (tool icons re-appear) then replace my tool palette wherre it was. But, it'S a neverending process everytime I reopen my PP3.
Anyone else encountered the same bug as I am ?
Thank you.

You should ask only once. We'll get to the question if we can help.

Asking userid and pwd in Inbox ( ESS )

HI all,
I am getting a strange error,
Am using ep 6.0 ,r/3 4.7 , ess 50.4
when i click ess -> inbox -> am getting the mails which have been submitted by employees, but once i click "execute" button, then its asking me for r/3 user id and password. We have done usermapping also but still its asking only when we click 'execute' button.
For other services such as 'who's who', 'personal information' its not asking for userid and pwd.
Please can any one tell me wat is the problem.
The error is in production server , so its very critical.. pls help me resolve this issue at the earliest..
Will be eagerly waiting for your positive response.
Thanks & Regards,
Mahesh.M.R

I don't recommend adding it as a query string parameter, but here is the URL:
http://localhost:8080/psc/hlbhrdev/EMPLOYEE/HRMS/c/ADMINISTER_WORKFORCE_(USF).EE_HR_PROC.USF?userid=VP1&pwd=VP1
The recommended approach would be to use a POST instead of a GET, which would put the username and password into the body of the request instead of the URL of the request.

Why the alert asking when running the script

can any one answer for below the snapshot
some javascripts asking, only run trusted source only. what is it?

The Toolkit asks this when there's a #target (indesign) defined in the code. Remove this and it doesn't ask anymore. The reason it tells you only to run from trusted sources is that scripts are able to run 'malicious code'.

To ask only

Similar Messages

Maybe you are looking for