To configure alert for BPM scenario.

Hi Experts
I have one BPM scenario(Asyn-Syn-Asy).
I have created one alert category for this and defined 3 alert rules:
first rule from SAP to BPM
second from BPM to 3rd party which is synchronous
and third from BPM to SAP.
But when i create faulty message by mapping error, alert is not triggered.
Can anyone tell me where I m going wrong??
And what additional configuration is required to trigger alert??
Thanks
Edited by: danishahmed on Jan 18, 2012 2:06 PM

Hi Danish,
Control Step is required to capture exceptions. If there is any error in main branch then Integration Process looks for alternate branch to execute which in this case should be Control step.
This control step will throw alert which should already be defined in Alert Category of IR.
Steps -
1. Drag a BLOCK from tools pellete and assign to your main flow. Now this block will be having 2 branches.
One branch will contain main flow and other will contain control step.
2. Right Click on Block and Insert -> Exception Branch
3. Drag and Drop CONTROL inside exception branch
Now you can configure Alert as in above mentioned my EL Netweaver blog post.
- Mandeep Virk

Similar Messages

How to Configure alert for process failures

Hi Friends.
How to Configure alert for process failures due to any reasons like mapping, runtime exceptions .
I am devloping one scenario which is file to flatfile. In this scenario I am also using mail adapter for sending mail daily to admin that tells about record size and no of records parallely. I am not using BPM in this scenario.
I am having very little experience in XI.
Please answer this with clear steps so that I can do it.

hi,
check the links below for all the details and help on configuring alerts
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/9418d690-0201-0010-85bb-e9b2c1af895b - How to setup alerts for monitoring in XI 3.0
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/003de490-0201-0010-68a4-bf7a1e1fd3a5 - Monitoring in XI 3.0
/people/michal.krawczyk2/blog/2005/09/09/xi-alerts--step-by-step - XI: Alerts configuration - Step by step
/people/michal.krawczyk2/blog/2005/09/09/xi-alerts--troubleshooting-guide - XI: Alerts - Troubleshooting guide
/people/bhavesh.kantilal/blog/2006/07/25/triggering-xi-alerts-from-a-user-defined-function
/people/community.user/blog/2006/10/16/simple-steps-to-get-descriptive-alerts-from-bpm-in-xi

Raise Alerts for BPM errors

Hi Experts,
I have a BPM, from which need to raise Alerts for Mapping error.
is it possible to raise alerts using Alert rule and with out throwing alerts from BPM.
Thank you,
<b>MK</b>

Hi MK
The SAP Computing Center Management System (CCMS) provides a special alert monitor for SAP Exchange Infrastructure.
You use this alert monitor to monitor the ABAP and Java components (including the Business Process Engine) of your Exchange Infrastructure centrally, and to identify different categories of system errors and application errors in the various interfaces and interface namespaces of the components involved.
You use the alert configuration to have the system inform you of errors during message processing. You can receive the alert by e-mail, fax, or SMS. In each case you will also find the alert in your alert inbox.
To configure your alerts, proceed as follows:
●     Create the alert categories that you want to use in your alert rules.
●     Create the alert rules in which you want to use your alert categories.
●     You can configure a connection to CCMS and schedule the periodic transfer of alerts to CCMS.
Once you have configured the connection to CCMS, choose Show CCMS Connection, select a period, and start the periodic transfer.
A background job is scheduled that collects all unprocessed alerts and forwards the data to CCMS. You can also stop this job.
As soon as a particular threshold value is reached, or is exceeded alerts are triggered and The transferred data is displayed in a special CCMS monitor.
You can raise alerts through BPM also .you can design your BPM in such a way that if an exception occurs, the exception handler for it has a control step in which youu can throw alert specifying the alert category and the text.
For more information on alert configuration and CCMS you can refer to http://help.sap.com/saphelp_nw2004s/helpdata/en/90/4e313f8815d036e10000000a114084/frameset.htm
http://help.sap.com/saphelp_nw2004s/helpdata/en/90/4e313f8815d036e10000000a114084/frameset.htm
http://help.sap.com/saphelp_nw2004s/helpdata/en/56/d5b54020c6792ae10000000a155106/content.htm
hope it may help you
Thanks
Sandeep
PS: if helpful reward points

Configuring Alert for Particular Interface

Hi All,
There are lots of post with regards to Alerts using RZ20 and ALRTCATDEF. However it would be of great help if I can get a blog link or sdn thread which can help me create Alerts and send to email in the below format.
Subject: Of my choice
From: System
To: My email or group email
Alert ID: ##ID number##
FROM :
interface:                <Sender Interface Name>
service:                  <Sender BS>
namespace:         <SenderNamespace>
TO :
service:                 <Receiver BS>
namespace:        <Receiver Namespace>
interface :             <Receiver Interface Name>
Also if some channel is in error or NWA locks are formed for more than a specified time can we create Alert for them?
Apologies if this turns out to be a duplicate post. Please post the proper thread in that case.
Regards,
Shaibayan

Hi Chakrabarti,
To set up alert below link if enough.
Alert Configuration – Step by Step Guide
You can perform various test cases and setup alerts as per your requirements.
To trouble shoot on alerts below thread list all important notes.
Mail not getting triggerred from Alerts in PI 7.1
Hope this helps you.
Regards
Jitender

How to configure alerts for error in Subscriber in transactional replication in SQL server

Hi All,
I am getting the below error in the subscriber which i know how to resolve but i want an alert to be raised whenever there is an error in the Subscriber.I tried using the configure alerts in the warning tab in the Sqlmonitor.exe but it didn't worked.Can
anybody help me out please.
Command attempted:
if @@trancount > 0 rollback tran
(Transaction sequence number: 0x00000000000000000A9200000000, Command ID: 1)
Error messages:
Invalid date format (Source: MSSQLServer, Error number: 20025)
Get help: http://help/20025
Invalid date format (Source: MSSQLServer, Error number: 22007)
Get help: http://help/22007
Thanks,

Can add with operator in sql server agent
SSMS -> Connect to the subscriber -> SQL Server Agent -> Alerts -> Double Click "Replication: agent failure" -> Response -> Add your operator with the alert type(s) you wish. (I recommend security groups instead of individuals).
Refer below thread
http://dba.stackexchange.com/questions/11971/how-do-i-set-up-an-alert-that-tells-me-when-a-replication-of-data-failed
Please click the Mark as answer button and vote as helpful if this reply solves your problem

Alert for BPM Transformation Step

Hi I am trying to think of a way to get the information from my alert transformation step into my Alert Message.
The scenario is a multiline container called XML_Collect mapping to XML_Output a single container with the XML messages merged.
If I encounter an error with mapping, currently I am raising an Alert with Process <Process ID> and Long Text Transformation Failure.
I have the Transform step in a Block and an exception branch for the Alert. I am going to instigate a Container Operation step to fill my Container variables with information about the error.
In the BPM Workflow Log I can see the Transformation1 Container Instance with variables such a MAPPING and MESSAGES_IN and _EXCEPTIONS in it.
Can I reference this container in my Container Operation.
Ideally I would like to know which XML message from the multiline container generated the mapping error. This would help in correcting.
I have read some information on a UDF calling Alerts but I am not sure if this is the method to use.
thanks,

It is MESSAGES_IN
We have
MAPPING MAPPING http://<company>.com/msghdr IM_T_MSGHDR_V3_to_T_MSGHDR_V3_Multi-<...>-1-
TRACE <?xml version="1.0" encoding="utf-8" ?>
<MappingTrace><Trace level="1" type="T">Mapping-Namespace:http://company.com/msghdr </Trace>
<Trace level="1" type="T">Mapping-Name:IM_T_MSGHDR_V3_to_T_MSGHDR_V3_Multi </Trace>
<Trace level="1" type="T">Mapping- ...
This trace is what appears in the XML trace also
MESSAGES_IN MESSAGES_IN < 1 Entry >
MESSAGES_IN[1] MESSAGES_IN[1] 0000000001-<...>
    NUMB Parameter ID 0000000001
    MESSAGES MESSAGES < 3 Entries >
XC     ZXI_PROXY_MI_MSGHDR_V3_0001     E0630F307D7B11DCA23700145E6916E5
XC     ZXI_PROXY_MI_MSGHDR_V3_0001     E035BDA07D7B11DCB90500145E6916E5
XC     ZXI_PROXY_MI_MSGHDR_V3_0001     BA2A92307D7511DCB09900145E6916E5
then the XML Header and Payload.
_EXCEPTIONS _EXCEPTIONS < 3 Entries >
_EXCEPTIONS[1] EXCEPTIONS[1] Component MAPPING has reported an error-The exception occurred (program: CLSW..
_EXCEPTIONS[2] EXCEPTIONS[2] com/sap/xi/tf/MM_T_MSGHDR_V3_to_T_MSGHDR_V3_Mult~com.sap.aii.utilxi.misc.api...
I have just tried the variable &_WORKITEM.WORKITEMID& and this gives the work item ID of the starting step for the Process.
My MESSAGE_ID variable that I am updating with the container variable straight after the Transformation step has the first message id from the multiline container but I know this isn't my incorrect message.

How to configure alerts for sender AS2 reports channel?

Hi,
We have configured sender AS2 reports channel to receive MDN back from our partner. Scenario is working fine and we are receiving MDN. How does "Enable alerts" option under Alerts Settings in Sender AS2 Reports channel work?
I see following options, but dont know how to trigger an alert when we dont receive successful MDN back:
Negative transmissionreport alert
Negative delivery report alert
Negative receipt report alert
Has anyone trigger any kind of alrert and route them to an email for negative mdn?
Regards,
Riya Patil

Hi Riya,
I tried to use 'Enable alerts' option,but it didn't work.
Please let me know if you get a success in this.
Thanks.
Regards,
Shweta

Integrated Configuration - Possible for this scenario?

Hi experts,
Could you please tell me if Integrated Configuration would work in this scenario, if so could you please tell me how.
A file is read and accordingly a RFC call is made. The response of the RFC is used to determine receivers. The receivers are other RFC's and IDoc's to different systems.
I was planning to use the receiver determination step in BPM to achieve this.
I am on PI 7.11
Thank you.
Radhika.

> Could you please tell me if Integrated Configuration would work in this scenario, ...
No. You cannot use IC in combination with BPM.

Two Alerts for one scenario: Application Error and No mapping found

Hello,
we have a synchronous scenario here embedded in an BPM.
The last send step step is sync. The receiver is a web service (SOAP adapter) which sends back a response.
Problem with the response from the service:
First test: error entries in SXMB_MONI and in RWB
RWB only shows message "No mapping found".
SXMB_MONI shows more:
1 entry for send step (status: log version)
1 entry for APPLICATION ERROR for response
1 entry for NO_MAPPING_PROGRAMM_FOUND for response
APPLICATION ERROR:
We have changed to trace level 3 now and there are some messages:
level 3 message type T: Unknown channel type: SOAP
Don´t know if this matters, because the channel is the sender channel.
NO_MAPPING_PROGRAMM_FOUND:
We have checked the whole implementation.
It is completed w/o anything missing. the required mapping is available.
No left change list entries to be activated.
Error text:
The Interface-Mapping http://xxx.com/xi/global GetDocIDsReq_nach_GetDocIDsResp is not available in runtime cache
We made more than one full cache refresh but w/o any effect.
We checked: There are no locks left!
Does anybody here have experience with this problem or has more ideas what to do?
Best regards
Dirk
Message was edited by:
Dirk Meinhard

Hello Dirk,
We figured out that if you change your message mapping you also have to refresh and save your Interface Mapping.
To ensure that your messages are equal with your Interfaces and the Message Types you should test the Interface Mapping by using integration Builder.
If this works you have to check your BPM.
By using BPM we figured out that if there is a fault in a BPM version the engine will not use this new version.
To figure out which BPM version is used you have to open the
Process Monitor à select the process and display the graphic à navigate to EXTRAS and select Workflow Builder. There you will see which BPM is really used. Maybe this is an old one.
Hope this will show you where the problem is.
Daniel

Receiver Determination steps for BPM scenario

Hi Experts,
Scenario : SOAP -> Calling different webservices
1. SOAP Client Request
2. Call the Initial webserive to get the unique Id. No need to pass any request to call this webservice, but it will give the response.
3. Take the Initial websrevice's response as a request to second webservice
4. Pass the SOAP client request to Third webservice
BPM steps
1. Receive Step for SOAP Request
2. Send Step for the Initial webservice call.
3. Transformation step Initial webservice response to request change.
4. Send Step for Second webservice (Pass the the Transformation step's target interface as a request)
5. Send Step for Third webservice ( Pass SOAP client request)
I am done with the BPM flow. Could you please help to do the Receiver Determination steps.
Usually I follow the below steps.
1. Sender Service to BPM
2. BPM to other services. I have a doubt with the second step. I am not passing the SOAP client request to Initial webservice. So, please tell me how to proceed further for the BPM Receiver Determination steps..
Thanks & Regards
Sara

Hey,
First, what is th purpose of your SOAP client request.
Is it just to trigger the BPM.
Second on what basis are you fetching the unique Id from initial web service.
If it is a normal scenario then, the reciever determination will be like this.
Soap client-> BPM
BPM->initial webservice
BPM->second webservice
BPM->third webservice
but in this particular scenario i dont know which data is being used to fetch the unique Id.
regards,
Milan

Alerts for a scenario in Advanced Adapter Engine

We have done an end to end scenario using advanced adapter engine in PI 7.1.
We have created an alert to give info abt an error which mite occur.
Do alerts work for messages which dont go to integration engine as the alert category is taken from abap stack?

Yes you can have alert mail/ message with AAE....just select where the error occured as Adapter Engine.

Configuring settings for proxy scenario.

Hi experts,
I have SAP R/3 and XI system, need to execute a proxy scenario.
What all configuration settings have to be done for the proxy part in both XI and SAP system.
Please help with links to some good blogs.
Thanks,
Younus

Hi,
There are two Types of proxies which can be done by ABAP or JAVA
client proxy is used by an application to send messages outside of the system it resides in (normally to the IS in this context).
server proxy is used by an application to receive messages from sources outside itself (again, normally the IS in this context).
/people/ravikumar.allampallam/blog/2005/03/14/abap-proxies-in-xiclient-proxy - ABAP Proxy to File
ABAP Proxy
How do you activate ABAP Proxies?
/people/vijaya.kumari2/blog/2006/01/26/how-do-you-activate-abap-proxies
ABAP Proxy Runtime
http://help.sap.com/saphelp_nw04/helpdata/en/02/265c3cf311070ae10000000a114084/frameset.htm
ABAP CLIENT PROXY
/people/ravikumar.allampallam/blog/2005/03/14/abap-proxies-in-xiclient-proxy
ABAP SERVER PROXY
/people/siva.maranani/blog/2005/04/03/abap-server-proxies. [original link is broken]
To test a connection - /people/vijaya.kumari2/blog/2006/01/26/how-do-you-activate-abap-proxies
Client Proxy - /people/ravikumar.allampallam/blog/2005/03/14/abap-proxies-in-xiclient-proxy
Server Proxy - /people/siva.maranani/blog/2005/04/03/abap-server-proxies
XI: Debug your inbound ABAP Proxy implementation
Testing proxy - /people/stefan.grube/blog/2006/07/28/xi-debug-your-inbound-abap-proxy-implementation
JAVA Proxies:
Asynchronous inbpund java Proxies
/people/prasad.ulagappan2/blog/2005/06/27/asynchronous-inbound-java-proxy
Hi,
Proxy Generation- For ABAP and Java proxy, create a Message Interface and then generate a proxy for that message interface.
http://help.sap.com/saphelp_nw2004s/helpdata/en/86/58cd3b11571962e10000000a11402f/content.htm
More on Java Proxy-
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/7d4db211-0d01-0010-1e8e-9b07fc2113ab
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/a068cf2f-0401-0010-2aa9-f5ae4b2096f9
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/f272165e-0401-0010-b4a1-e7eb8903501d
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/a068cf2f-0401-0010-2aa9-f5ae4b2096f9
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/f272165e-0401-0010-b4a1-e7eb8903501d
ABAP Proxies:
Integration Builders through proxy server (Part - 2)
/people/sap.user72/blog/2005/12/13/integration-builders-through-proxy-server-part--2
/people/ravikumar.allampallam/blog/2005/03/14/abap-proxies-in-xiclient-proxy
***Assign points if you found helpful
Regards.,
V.Rangarajan

Configuring Alerts For Failed Logins

I am confused about how to configuring OEM GC to utilize auditing and may not be asking the proper question. For example, if I wish to monitor failed login counts and create an alert to notify me, must I turn on auditing in the database first? I guess what I am asking is based on the tem,plates provided. Is it merely enough to enter values for the various events or must I do something further to turn them on? I realize the question is vague but that is a function of my understanding.
Thanks.

801603 wrote:
I am confused about how to configuring OEM GC to utilize auditing and may not be asking the proper question. For example, if I wish to monitor failed login counts and create an alert to notify me, must I turn on auditing in the database first? I guess what I am asking is based on the tem,plates provided. Is it merely enough to enter values for the various events or must I do something further to turn them on? I realize the question is vague but that is a function of my understanding.
Thanks.Yes.. you are right .. You need to enable that metric by setting threshold(You can do it through template or manual) and then configure notification rule for the same.
Check out below DOC :
http://download.oracle.com/docs/cd/B16240_01/doc/em.102/b25986/rac_database.htm#sthref326
http://download.oracle.com/docs/cd/B16240_01/doc/em.102/e14586/notification.htm#BABJFFCJ
Regards
Rajesh

OEM12c Configuring alerts for normal condition

Hi All,
I want to configure OEM12c so that i should get alerts even for normal condition of the host machines.
i.e i want OEM to send alerts saying target system is alive and working properly. please let me know how to do it or point me to the document which helps me.
Thank you

This is turning the essence of monitoring upside down. In EM you will get an warning/alert if an abnormal situation occurs. Hence, if you do not get an alert/warning everything is normal. Seems to me something like phoning home every half hour to ask if the house has not burned down yet.
Eric

How to configure alert when sender CChannel failes

Hi PI Gurus,
Is there is any way to get an alert when a sender channel fails (reason connection time out etc.).
We have configured alerts for other scenarios when mapping is failing. How to handle the other situation.
Regards,
Krishna Chauhan

Hi,
Please check below urls.
http://wiki.sdn.sap.com/wiki/display/XI/Alert%2bConfiguration%2bin%2bXI?bc=true
ALRTCATDEF table SALRTCATUS
http://help.sap.com/saphelp_nw04/Helpdata/EN/8a/3e2d4105f8d92be10000000a1550b0/frameset.htm
http://help.sap.com/saphelp_nw04/helpdata/en/96/f1033c128f4a7de10000000a114084/frameset.htm
Thanks
Ravi

To configure alert for BPM scenario.

Similar Messages

Maybe you are looking for