To continue connecting to your website, you must repair or remove its administrative settings
Hello.
When trying to connect to my website, I'm getting a prompt saying the files appear to have been recently moved.....yadayada. I realise it's like this since we have changed to a new host since I see our old one there correct? OK-so my question is what happens after I click that button that says to remove the administrative settings for your website and continue connecting?
I've been told to update our website and I don't have a whole lot of knowledge about it. I do connect to it at work through ftp for uploading pix and access to cpanel but that's about it.
The person that did the site no longer works with me, but I know that he used Contribute3 (Macromedia) for at least some of the site, so I'm assuming the new Contribute will work.
I really don't want to screw things up clicking that button and somehow mess up our site.
Thanks for the help!
Jim
Thanks very much Dominic:
I was able to open that cthubxxxxx.csi file in text editor and I assume I just put in http://www.liquidweb.com (in place of our old host in at least 3 spots) since they are our new host? As far as the IP addres goes, where do I get that or find it? Is it the IP address for the host (liquidweb)? I assume I call them for this information?
Just one other question:
I noticed on the cthubxxxxx.csi file it says macromedia_dreamweaver_hub. I assume that means the site was made with dreamweaver? I assume I will be able to edit with Contribute?
Thanks again for your help-
Jim
Similar Messages
-
Hi,
I have a SharePoint 2010 farm with two Web Applications.
For example:
https://contoso.domain.com
https://finance.domain.com
Both Webapp use https --> 443. Same valid certificate for both (*.domain.com)
I tested exporting an Excel library in https://contoso.domain.com.
It export and sync up sucessful the Excel library and it updates it OK.
However, once exported the Excel library in https://finance.domain.com, when
I try to syncronize or update the library I receive an error back, which indicates: "A connection to the SharePoint site cannot be established. To synchronize or
refresh your list, you must be able to connect to the SharePoint site". I had tested the WebDav (Map Network Drive) and the connection results OK.
Do you have any idea about this issue?? Why https://finance.domain.com do not
synchronize or refresh in excel o SharePoint site???
I had tested the security with IIS, SSL, WebDav.
Thank you,
GabyHi!!!
I solved this problem.
I created a new Application Web in the farm (https://project.domain.com), dismount content database the old application web ( https://finance.domain.com)
and the new application web (https://project.domain.com).
#New AppWeb project.domain.com
Get-SPContentDatabase -WebApplication https://project.domain.com | Dismount-SPContentDatabase -WhatIf
#Old AppWeb
Get-SPContentDatabase -WebApplication https://finance.domain.com | Dismount-SPContentDatabase -WhatIf
Mount the old content database to the new application web (https://project.domain.com).
Mount-SPContentDatabase "WSS_Content_Finance" -DatabaseServer "MyServer" -WebApplication https://project.domain.com
If you want to keep the same url, change the alternate access mappings.
Remember to change the bindings in IIS.
Hope you help the solution...
Gaby -
I am trying connect to a SQL instance for our CRM program and I am receiving To Connect to this Server you must use SQL Management Studio or SQL Server Management
This is a Brand new Server 2012 that is running our CRM product and it is trying to connect to a Server 2008 R2 server with SQL Server 2008 R2 SP2 instance (10.50.4000)
I have seen this in the past where it needed the 2005 backwards compatibility components installed but those are not supported on 2012 server and this is not a 2005 SQL instance.
I am trying to install the Shared Management Objects for SQL Server 2008 but it tells me I need to install the CLR types, which I did install. But it continues to tell me to install the CLR types.
Has anyone ran into any issues like this? (this happens trying to connect to multiple SQL Servers from this new 2012 Server)
Thanks!
-MaxHello,
Which version and edition of the SQL Server instance did you installed on the new server machine? If you install SQL Server 2012 Express edition, you can try to install SQL Server Management Studio 2012 from
this link.
You can connect to SQL Server 2008 R2 or earily verions with SSMS 2012.
What's more, Microsoft SQL Server 2008 Management Objects Collection requires Microsoft Core XML Services (MSXML) 6.0, Microsoft SQL Server Native Client, and Microsoft SQL Server System CLR Types. You can try to download and install
SQL Serve 2008 Feature Pack
which contains packages above.
Regards,
Fanny Liu
Fanny Liu
TechNet Community Support -
You cannot use this product at this time. You must repair the problem by uninstalling and then reinstalling the product or contacting your IT administrator or adobe customer support for help
This forum is none of those things. That being said, we may be able to help.
Have you tried uninstalling and reinstalling the product? If not, please consider following these instructions:
Use the CC Cleaner Tool to solve installation problems | CC, CS3-CS6
-Noel -
I cannot utilize my Adobe documents - I get this error message - “You cannot use this product at this time. You must repair the problem by uninstalling and then reinstalling this product or contacting your IT administrator or Adobe customer support for help.”
Thank you! My solution was different. I had turned off services in MSCONFIG and did not turn them back on. After I turned services back on, Acrobat started working again without the nag error and impedance to use the program. I appreciate your input! Adobe customer service/tech support was dismally disappointing.
-
trying to launch photoshop cs3 on a mac running OS10.6.8 i keep getting the error message: Licensing for this product has stopped working you cannot use this product at this time. You must repair the problem by uninstalling and then reinstalling this product or contacting your IT adminstrator or Adobe customer support for help
I already Uninstalled and reinstalled the product and it still does not work.Hi,
Try to uninstall the software again and you have to manually
Delete the following folders:
[Startup Disk]/Library/Application Support/Adobe/Adobe PCD
[Startup Disk]/Library/Application Support/Adobe/caps
[Startup Disk]/Library/Application Support/Adobe/backup
[Startup Disk]/Library/Preferences/FLEXnet Publisher/
[Startup Disk]/Library/Application Support/FLEXnet Publisher/
Go to Applications-->Utilities-->Disk Utility, Open it and Select the MAC HD and then click on Repair permissions.
After that try to run the cleaner tool as mentioned by kglad.
Restart machine and then try to install again.
*** Make sure , you only delete these folders if there is no other adobe applications installed on the machine. As if you have any other Adobe application of the suite ( not free applications ) then it will be a problem. -
My Adobe Acrobat 9 Standard stopped working after I performed an msconfig. I get the following message: "You cannot use this product at this time. You must repair the problem by uninstalling and reinstalling this product..." I installed this on Jan. 7, 2010 and I have since misplaced the disk.
How do I fix the problem?Hi Ali,
You can download Acrobat 9 Std. from: https://files.acrobat.com/a/preview/8d640488-4a92-4f7d-b50b-d8eb7f96bff8
and reinstall the software.
Regards,
Rave -
Can You Restore Group Policy to its Deafault Settings
I was wondering if you can restore Group Policy to its default settings with no GPO's or anything (except of course for the deafult two)?
Thanks for the help.You can use the DCGPOFIX.EXE utility (see
http://technet.microsoft.com/en-us/library/cc736813(WS.10).aspx) to return the "Default Domain Policy" and "Default Domain Controllers Policy" back to their default settings. If you do decide to do that, be sure you save a copy of the settings report from
the GPOs as they sit before you run DCGPOFIX so that you can create addt'l GPOs with your customizations in them. -
Mozilla Firefox 4.o Beta 3
Windows XP SP3Clear the cookies from that website to get logged off.
Remove Cookies, use the search bar or click the [[Site Identity Button]] on the location bar and go to "View Cookies" via the More Information button in the pop-up.
* Tools > Options > Privacy > Cookies: "Show Cookies"
You are running an old Firefox 4.0 beta 3 version.<br />
Any reason why you haven't installed the Firefox 4.0 release?
* http://www.mozilla.com/en-US/firefox/all.html -
Help.iTunes could not connect to the iPod, you must enter passcode first...
My wife recently turned her iTouch on, to find this connect to iTunes screen.
When we connect it to iTunes, we get this pop up.
The problem is, the iPod will not allow us to do anything but shut it off and it remains on the connect to iTunes screen? I tried to hold the "Home" button and connect, but that wont even work to get it in recovery mode. I've searched the web, and keep reading the same replies "put in the passcode" or "you stole it", however i dont think people realize it wont allow that option...any suggestions? I have/know the passcode....it's not stolen...it just wont do anything and iTunes suck...try connecting the device in _*recovery mode*_, then set it up as a new device. might be a better idea not to restore from the backup.
-
How do you restore and iPhone to its original settings?
How to restore an iPhone 5 to its original settings
That depends on what you are trying to accomplish.
If you wish to restore the device as new: http://support.apple.com/kb/HT1414
If you just want to erase the content and settings: iOS: Understanding 'Erase All Content and Settings' -
"You must reset your password. Check inbox for email we just sent you." Not at old or new.
I've been trying all day to change my email address associated with my Adobe account, using Firefox, my default browser. I am able to access my acct (old e-address), make changes in account, but then the screen displays:
Required Password Reset: To protect the security of your account, you must reset your password. Please check your inbox for an email we just sent you with instructions for how to reset your password and log into your account.
I have checked both email accts throughout the day, including spam folders. Cleared browser history etc. Tried using Internet Explorer. And every other action they recommend.
How can I get through the Password Reset Wall?
Thanks,
SandraThanks, Dave. I think your link helped to solve my problem. Now that I have a new password, I'd like to ask this: Is making changes to your account so difficult for others? I ask because changing my password wasn't even the reason I was accessing my Adobe account.
What I really want to do is to switch primary (1) and alternate (2) email addresses. I have a third (3) email address, which I can use for this process. For example, my idea is to replace (2) with (3), then (1) with (2), then (3) with (1). [I had already tried switching them; a lost cause.]
I replaced (2) with (3). BUT! "An email has been sent to your inbox. Please check your email to complete verification."
But I check all three email addresses and spam folders in each, several (m@any) times in a day, and that email never arrives. Even when I try making a different change.
And all this so that I can prepare to purchase Adobe XI and have all communication between Adobe and me at that (currently) #2 address, which is the one I use for almost everything, and to keep all my receipts, software and hardware correspondence, and oh everything.
Thanks for reading so far; if you (or anyone) have another way to accomplish this, please let me know. -
Hi
I have problem when I was make a new account in app store I put my country is Kuwait but I was change before one or tow week ,,,now I need to change to my
country ,, when I was try I see MSG say
( you have a store credit balance: you must spend your balance before you can change stores )
please I no need money
its 0,10$,,, I need to change the country now I should make update to my software please help me
this my account in app store in apple
[email protected]You are correct, in order to change the country of your account, you must get rid of the remaining balance. Contact iTunes Customer Service and they can take care of it.
-
Fresh installation of Exchange Server 2013 on Windows Server 2012.
Our first test account cannot access their email via Outlook but can access fine through OWA. The following message appears - "Cannot open your default e-mail folders. You must connect to Microsoft Exchange with the current profile before you can synchronize
your folders with your Outlook data file (.ost)" is displayed.
If I turn off cached Exchange mode, setting the email account to not
cache does not resolve the issue and i get a new error message - "Cannot open your default e-mail folders. The file (path\profile name).ost is not an Outlook data file (.ost). Very odd since it creates its own .ost file when you run it for the first
time.
I cleared the appdata local Outlook folder and I tested on a new laptop that has never connected to Outlook, same error message on any system.
Microsoft Exchange RPC Client Access service is running.
No warning, error or critical messages in the eventlog, it's like the healthiest server alive.
Any help would be greatly appreciated. I haven't encountered this issue with previous versions of Exchange.So it looks like a lot of people are having this issue and seeing how Exchange 2013 is still new (relatively to the world) there isn't much data around to answer this. I've spend ALOT of time trying to figure this out.
Here is the answer. :) - No I don't know all but I'm going to try to give you the most reasonable answer to this issue, in a most logical way.
First thing I did when I was troubleshooting this issue is that I ignored Martina Miskovic's suggestion for Step4 http://technet.microsoft.com/library/jj218640(EXCHG.150)because it didn't make sense to me because I was trying to connect
Outlook not outside the LAN but actually inside. However, Martina's suggestion does fix the issue if it's applied in the correct context.
This is where the plot thickens (it's stew). She failed to mention that things like SSL (which I configure practically useless - anyone who ever worked in a business environment where the owner pretty much trusts anyone in the company, otherwise they don't
work there - very good business practice in my eyes btw, can confirm that...) are some sort of fetish with Microsoft lately. Exchange 2013 was no exception.
In exchange 2003, exchange 2007 and exchange 2010 - you could install it and then go to outlook and set it up. And when outlook manual Microsoft Exchange profile would ask you for server name, you would give it and give the name of the person who you setting
up - as long as machine is on the domain, not much more is needed. IT JUST WORKS! :) What a concept, if the person already on premises of the business - GIVE HIM ACCESS. I guess that was too logical for Microsoft. Now if you're off premises you can use things
like OutlookAnywhere - which I might add had their place under that scenario.
In Exchange 2013, the world changed. Ofcourse Microsoft doesn't feel like telling it in a plain english to people - I'm sure there is an article somewhere but I didn't find it. Exchange 2013 does not support direct configuration of Outlook like all of it's
previous versions. Did you jaw drop? Mine did when I realized it. So now when you are asked for your server name in manual outlook set up and you give it Exchange2013.yourdomain.local - it says cannot connect to it. This happens because ALL - INTERNAL AND
EXTERNAL connection are now handled via OutlookAnywhere. You can't even disable that feature and have it function the reasonable way.
So now the question still remains - how do you configure outlook. Well under server properties there is this nice section called Outlook anywhere. You have a chance to configure it's External and Internal address. This is another thing that should be logical
but it didn't work that way for me. When I configured the external address different from the internal - it didn't work. So I strongly suggest you get it working with the same internal address first and then ponder how you want to make it work for the outside
users.
Now that you have this set up you have to go to virtual directories and configure the external and internal address there - this is actually what the Step 4 that Martina was refering to has you do.
Both external and internal address are now the same and you think you can configure your outlook manually - think again. One of the most lovely features of Outlook Anywhere, and the reason why I had never used it in the past is that it requires a TRUSTED
certificate.
See so it's not that exchange 2013 requires a trusted certificate - it's that exchange 2013 lacks the feature that was there since Windows 2000 and Exchange 5.5.
So it's time for you to install an Active Direction Certificate Authority. Refer to this wonderful article for exact steps - http://careexchange.in/how-to-install-certificate-authority-on-windows-server-2012/
Now even after you do that - it won't work because you have to add the base private key certificate, which you can download now from your internal certsrv site, to Default Domain Policy (AND yes some people claim NEVER mess with the Default Domain Policy,
always make an addition one... it's up to you - I don't see direct harm if you know what you want to accomplish) see this: http://technet.microsoft.com/en-us/library/cc738131%28v=ws.10%29.aspx if you want to know exact steps.
This is the moment of ZEN! :) Do you feel the excitement? After all it is your first time. Before we get too excited lets first request and then install the certificate to actual Exchange via the gui and assign it to all the services you can (IIS, SMTP and
there is a 3rd - I forgot, but you get the idea).
Now go to your client machine where you have the outlook open, browse to your exchange server via https://exchang2013/ in IE and if you don't get any certificate errors - it's good. If you do run on hte client and the server: gpupdate /force This will refresh
the policy. Don't try to manually install the certificate from Exchange's website on the client. If you wanna do something manually to it to the base certificate from the private key but if you added it to the domain policy you shouldn't have to do it.
Basically the idea is to make sure you have CA and that CA allows you to browse to exchange and you get no cert error and you can look at the cert and see that's from a domain CA.
NOW, you can configure your outlook. EASY grasshoppa - not the manual way. WHY? Cause the automatic way will now work. :) Let it discover that exachange and populate it all - and tell you I'm happy! :)
Open Outlook - BOOM! It works... Was it as good for you as it was for me?
You may ask, why can't I just configure it by manual - you CAN. It's just a nightmare. Go ahead and open the settings of the account that got auto configed... How do you like that server name? It should read something like [email protected]
and if you go to advanced and then connection tab - you'll see Outlook Anywhere is checked as well. Look at the settings - there is the name of the server, FQDN I might add. It's there in 2 places and one has that Mtdd-something:Exchange2013.yourdomain.local.
So what is that GUID in the server name and where does it come from. It's the identity of the user's mailbox so for every user that setting will be different but you can figure it out via the console on the Exchange server itself - if you wish.
Also a note, if your SSL certs have any trouble - it will just act like outlook can't connect to the exchange server even though it just declines the connection cause the cert/cert authority is not trusted.
So in short Outlook Anywhere is EVERYWHERE! And it has barely any gui or config and you just supposed to magically know that kind of generic error messages mean what... Server names are now GUIDs of the [email protected] - THAT MAKES PERFECT
SENSE MICROSOFT! ...and you have to manage certs... and the only place where you gonna find the name of the server is inside the d*** Outlook Anywhere settings in the config tab, un it's own config button - CAN WE PUT THE CONFIG ANY FURTHER!
Frustrating beyond reason - that should be Exchange's new slogan...
Hope this will help people in the future and won't get delete because it's bad PR for Microsoft.
PS
ALSO if you want to pick a fight with me about how SSL is more secure... I don't wanna hear it - go somewhere else... -
Iphone has a message on it that said iphone is disable connect to itune. i try but it said that you must unlock your phone. but the iphone will not let me bring up the keypad so i can put the code in to unlock it, it has the message iphone disable connect to itune. what can i do?
Make sure you have the Current Version of iTunes Installed on your computer
iTunes free download from www.itunes.com/download
Then See Here > http://support.apple.com/kb/HT1808
You may need to try this More than Once... Be sure to Follow ALL the Steps...
Take your time... Pay particular attention to Steps 3 and 4.
After you have Recovered your Device...
Re-Sync your Content or Restore from the most recent Backup...
Restore from Backup > http://support.apple.com/kb/ht1766
Note. Once the Device is asking to be Restored with iTunes... it is too late to save anything... and you must continue with the Recovery...
Maybe you are looking for
-
Hello Experts, DownPayment has been made to vendor, usually while processing in MIRO we will get an message which says Fixed assets downpayment exist,but for this particular vendor the message is not displaying. Thanks in Advance
-
WQL Query for Last Policy Request
I'm trying to create a collection based on workstations whose last policy request was more than 30 days ago and I'm having trouble with the query statement. Any help would be greatly appreciated.
-
System slow after update tu mountain lion
I just update my 2.53 GHz Intel Core i5 4 GB MacBook Pro from Snow Leopard to Mountain Lion but the hole system became too slow. Is there any suggestion to resolve the problem?
-
IPhoto quits/crashes every time I launch application
Below is the message I get every time I try to launch iPhoto. What can I do?
-
The bar that contains 'content' and 'layout' links is gone...
Hi, I'm developing portlets on Sun Java System Portal Server 6. I developed some new portlets and I also changed the tab.jsp file in the JSPTabContainerProvider channel for my desktop type. Now I see that I don't have the 'layout' and 'content' links