To create link for the selected named destination..
Hello,
I am getting list of Named Destinations(Title of the named destinations) using cos object values.
I will be storing those titles in combobox. I want to create link for the selected named destination.
I tried to set destination for the link using cos object value of the selected name destination.
cosPageValue is cos object value of named destination.
CosObj cosArrayDest = CosNewArray( cosDoc, true, 2 );
CosArrayPut( cosArrayDest, 0, cosPageValue );
But it has given me an Unhandled Exception.
I am not able to get destination page number for the named destination.
Please suggest me how do I can create link for the selected named destination?
Thank you,
I seem to recall (don't have the docs handy) that there is a higher level
PDDest object and a PDAction object - you might want to look at using those
higher level objects (created via PDXXXFromCosObj) if you are having trouble
working with Cos.
Leonard
Similar Messages
-
Foreign key cannot be created for the selected field A907-MWSKZ
Dear Guru's,
I am having the requirement for creation of access sequence having country/Plant/vendor/tax code but during creation of condition table i am getting the error as
Foreign key cannot be created for the selected field A907-MWSKZ.
Anything i am missing please let me know.
Regards,
UmeshHi Umesh,
Actually i am also facing exactly the same problem as mentioned by you that is "Foreign key cannot be created for the selected field A769-MWSKZ ".
I think you found some solution regarding this..can you please help me to solve it.
Looking forward for your prompt reply..
Thanks & Regards,
Sandeep Sharma -
Status profile for the selection screen ?
Dear Shymal,
The link of thread which you sent have this line status profile for the selection screen for QA33 and QA32 . I don't users ti get those lots which are having status LTCA.
Now how can i do this? Can you explain me?
Regards,
Kaushal RaiDear Kaushal,
It is written in that reply status profile, is just a slip of mind/Fingers only. We can say a typographical error. I hearty apologies for the same.
Now a accept my regret and pls find the rectification herewith.
That is "Selection Profile", to create rather I can say configure it,
- Run trx BS42, create new profile, Name it Logically.
- Double click on the "_Selection Conditions_",system will lead you to the screen named Change View "Selection Conditions": Over View.
- Here Enter the LTCA, in the Fourth Column "STATUS".
- Click on the check box under Sixth column 'not'.
The settings should be as.....
1st Column,,,Link :- No Links (Blank0
2nd Column,,,Usr:- Don't check this box.
3rd Column,,,St.Prof.:- Blank
4th Column,,,Status:- LTCA.
5th Column,,,Status:- Lot canceled
6th Column,,,not:- Check this box.
7th Column,,,Status:- It will be 'Active' by default.
Now SAVE.....
Now in QA32, pick the section profile you just created.
Let me know if it don't work.
Regards,
Shyamal -
Hi All,
we have a Citrix XenApp 7.5 Farm with Windows Server 2012 R2 Servers and multiple (english, german, italian, spanish, french...) languages installed.
I've created a GPO with settings 'Restricts the UI languages Windows should use for the selected user' to for example 'German'.
Now when a user logs on to the server, the UI language is in german, but when i open Control Panel\Language: There is still English (United States) with Keyboard Layout: US, German.
It seems that the GPO is not changing all settings correctly to german.
Does anybody know what could be wrong?
best regards,
SiegmundHi Siegmund,
>>Now when a user logs on to the server, the UI language is in german, but when i open Control Panel\Language: There is still English (United States) with Keyboard Layout: US, German
Based on the description, the policy setting should have been applied successfully. Here, did we logged onto the server via remote desktop services? If yes, what's the keyboard layout on the computer we used to RDP to the server? Before going further,
I assume that this can be caused by Auto detect Remote Keyboard layout feature introduced since Windows Server 2008.
Regarding this point, the following artcile can be referred to for more information.
Windows 2008 R2 Language Bar keeps changing Keyboard Settings
http://www.microsoftpro.nl/2011/02/24/windows-2008-r2-language-bar-keeps-changing-keyboard-settings/
Note: For the above website is not hosted by Microsoft, the link may become invalid without notice and Microsoft doesn't guarantee the accuracy of the information.
In addition, the following thread can also be referred to for more information.
2008 R2 Session Host with MUI controlled via Group Policy
http://social.technet.microsoft.com/Forums/windowsserver/en-US/4e14955a-80f9-40aa-9741-fc8609f4ad09/2008-r2-session-host-with-mui-controlled-via-group-policy?forum=winserverGP
Best regards,
Frank Shen -
Problem with creating links with the WPC (SP14)
Hi,
I have a problem creating links with the WPC (SP14): When I want to create internal links (Browse and select the target item) via the right button (choosing a website as a reference link). If I do so I encounter the problems either that the linked site (outside the WPC) shows a blue background and/ or has no navigation frame (on the left side & no breadcrumb-navigation on top).
If I create links with the left button in the WPC via URLs I have the problem with the inserted URL, because sometimes (I don't know why und when) some parts of the code in the URL changes, so that the linked Website is empty (besides the navigation fram - the content isn't displayed anymore). To me it looks like as if the originally website cannot be "found" anymore.
Does anyone has the same problems and is eventually able to help me? This would be really great. Thanks!Hi,
you have also to deploy the following file from Service Marketplace:
Patch for SP14 for KMC WEB PAGE COMPOSER 7.00
Than it will works. The best way is you deploy WPC SP 15.
If you want i can send you this file via email.
regards,
Sharam
Edited by: Seed mopo on Apr 28, 2008 11:45 AM -
How to find out the link for the tables for sub contract PO
Dear All,
How to find out the link for the tables for sub contract PO, I am looking for the fields Material, Unit, Batch no., quantity.
Please provide the solution for the Table related to ABAP.
Thanks,
V.V.Hi,
Make use of the table EKKO, EKPO...
For subcontract please select the option in EKPO-PSTYP.
Regards
GK. -
How to populate the ranges using FM for the SELECTs
Hi,
I am still working on the FM to create a generic extractor. I went through the debugger but I am still unable to determine how the ranges are populated. RSA3 always gives me zero values for the results.
There is a RANGE statement in the sample FM and the following statements for SELECTs
RANGES: L_R_CARRID FOR SFLIGHT-CARRID,
L_R_CONNID FOR SFLIGHT-CONNID.
and...
LOOP AT S_S_IF-T_SELECT INTO L_S_SELECT WHERE FIELDNM = 'CARRID'.
MOVE-CORRESPONDING L_S_SELECT TO L_R_CARRID.
APPEND L_R_CARRID.
ENDLOOP.
LOOP AT S_S_IF-T_SELECT INTO L_S_SELECT WHERE FIELDNM = 'CONNID'.
MOVE-CORRESPONDING L_S_SELECT TO L_R_CONNID.
APPEND L_R_CONNID.
ENDLOOP.
My question is how is L_R_CONNID and L_R_CARRID populated with low and high values for the SELECT statements? I tried to find the DS 0SAPI_SFLIGHT_SIMPLE to run and see how it is set up but there is no such DS.
Would someone take the time to say something about this in several sentences? I have my own code and it seems that it is not populating the values for the SELECTs when I debug from RSA3 when I provide the low and high values.
Would I normally populate the low and high values from the InfoPackage 'Data Selection' tab once I have implemented in BW or ready to test in BW? That would mean I have to choose those fields as selections from RSO2. Anyway, I think I have asked about this but I am hoping to get an answer to get this going...
Appreciate any replies.Hi
Here is an example of an extractor that uses
both method's, if the InfoPackage selection exist's
it overrides the TVARV selection (which is the default).
FUNCTION ZBW_TC_FORECAST_SO_EXTRACTOR.
""Local interface:
*" IMPORTING
*" VALUE(I_REQUNR) TYPE SBIWA_S_INTERFACE-REQUNR
*" VALUE(I_DSOURCE) TYPE SBIWA_S_INTERFACE-ISOURCE OPTIONAL
*" VALUE(I_CHABASNM) TYPE SBIWA_S_INTERFACE-CHABASNM OPTIONAL
*" VALUE(I_MAXSIZE) TYPE SBIWA_S_INTERFACE-MAXSIZE OPTIONAL
*" VALUE(I_INITFLAG) TYPE SBIWA_S_INTERFACE-INITFLAG OPTIONAL
*" VALUE(I_UPDMODE) TYPE SBIWA_S_INTERFACE-UPDMODE OPTIONAL
*" VALUE(I_DATAPAKID) TYPE SBIWA_S_INTERFACE-DATAPAKID OPTIONAL
*" VALUE(I_PRIVATE_MODE) OPTIONAL
*" VALUE(I_CALLMODE) TYPE ROARCHD200-CALLMODE OPTIONAL
*" TABLES
*" I_T_SELECT TYPE SBIWA_T_SELECT OPTIONAL
*" I_T_FIELDS TYPE SBIWA_T_FIELDS OPTIONAL
*" E_T_DATA STRUCTURE ZBW_TC_FORECASTING_EXT_STR OPTIONAL
*" EXCEPTIONS
*" NO_MORE_DATA
*" ERROR_PASSED_TO_MESS_HANDLER
*" HIERARCHY_NOT_FOUND
Change History *
Mod. # | Date | Developer | Description *
*RD3K915762|06/21/2005| SRangaraj | Change selection of open SO *
| | | data to include deleted matls *
| | | and obsolete items too *
RD3K915888|06/29/2005| SRANGARAJ | Add ext matl grp and lab offce
| | | filters for data-selection *
The input parameter I_DATAPAKID is not supported yet !
Auxiliary Selection criteria structure
DATA: L_S_SELECT TYPE SBIWA_S_SELECT.
Maximum number of lines for DB table
STATICS L_MAXSIZE TYPE SBIWA_S_INTERFACE-MAXSIZE.
Parameter I_PRIVATE_MODE:
Some applications might want to use this function module for other
purposes as well (e.g. data supply for OLTP reporting tools). If the
processing logic has to be different in this case, use the optional
parameter I_PRIVATE_MODE (not supplied by BIW !) to distinguish
between BIW calls (I_PRIVATE_MODE = SPACE) and other calls
(I_PRIVATE_MODE = X).
If the message handling has to be different as well, define Your own
messaging macro which interprets parameter I_PRIVATE_MODE. When
called by BIW, it should use the LOG_WRITE macro, otherwise do what
You want.
Initialization mode (first call by SAPI) or data transfer mode
(following calls) ?
IF I_INITFLAG = SBIWA_C_FLAG_ON.
Initialization: check input parameters
buffer input parameters
prepare data selection
The input parameter I_DATAPAKID is not supported yet !
Invalid second initialization call -> error exit
IF NOT G_FLAG_INTERFACE_INITIALIZED IS INITIAL.
IF 1 = 2. MESSAGE E008(R3). ENDIF.
LOG_WRITE 'E' "message type
'R3' "message class
'008' "message number
' ' "message variable 1
' '. "message variable 2
RAISE ERROR_PASSED_TO_MESS_HANDLER.
ENDIF.
Check InfoSource validity
CASE I_DSOURCE.
WHEN 'ZBW_TC_SO_EXTRACT'.
WHEN OTHERS.
IF 1 = 2. MESSAGE E009(R3). ENDIF.
LOG_WRITE 'E' "message type
'R3' "message class
'009' "message number
I_DSOURCE "message variable 1
' '. "message variable 2
RAISE ERROR_PASSED_TO_MESS_HANDLER.
ENDCASE.
Check for supported update mode
CASE I_UPDMODE.
WHEN 'F'.
WHEN OTHERS.
IF 1 = 2. MESSAGE E011(R3). ENDIF.
LOG_WRITE 'E' "message type
'R3' "message class
'011' "message number
I_UPDMODE "message variable 1
' '. "message variable 2
RAISE ERROR_PASSED_TO_MESS_HANDLER.
ENDCASE.
Check for obligatory selection criteria
READ TABLE I_T_SELECT INTO L_S_SELECT WITH KEY FIELDNM = 'PGMID'.
IF SY-SUBRC <> 0.
IF 1 = 2. MESSAGE E010(R3). ENDIF.
LOG_WRITE 'E' "message type
'R3' "message class
'010' "message number
'PGMID' "message variable 1
' '. "message variable 2
RAISE ERROR_PASSED_TO_MESS_HANDLER.
ENDIF.
APPEND LINES OF I_T_SELECT TO G_T_SELECT.
Fill parameter buffer for data extraction calls
G_S_INTERFACE-REQUNR = I_REQUNR.
G_S_INTERFACE-ISOURCE = I_DSOURCE.
G_S_INTERFACE-MAXSIZE = I_MAXSIZE.
G_S_INTERFACE-INITFLAG = I_INITFLAG.
G_S_INTERFACE-UPDMODE = I_UPDMODE.
G_S_INTERFACE-DATAPAKID = I_DATAPAKID.
G_FLAG_INTERFACE_INITIALIZED = SBIWA_C_FLAG_ON.
Fill field list table for an optimized select statement
(in case that there is no 1:1 relation between InfoSource fields
and database table fields this may be far from beeing trivial)
APPEND LINES OF I_T_FIELDS TO G_T_FIELDS.
Fill range tables for fixed InfoSources. In the case of generated
InfoSources, the usage of a dynamical SELECT statement might be
more reasonable. BIW will only pass down simple selection criteria
of the type SIGN = 'I' and OPTION = 'EQ' or OPTION = 'BT'.
LOOP AT G_T_SELECT INTO L_S_SELECT.
CASE L_S_SELECT-FIELDNM.
WHEN 'PRDHA'.
WGF_PRDHA_LENGTH = STRLEN( L_S_SELECT-LOW ).
IF WGF_PRDHA_LENGTH = 6. "PARTIAL PRDHA
WGF_PRDHA = L_S_SELECT-LOW.
CONCATENATE WGF_PRDHA '%' INTO WGF_PRDHA.
ELSEIF WGF_PRDHA_LENGTH = 12. "FULL PRDHA
MOVE-CORRESPONDING L_S_SELECT TO L_R_PRDHA.
APPEND L_R_PRDHA.
ENDIF.
WHEN 'MATKL'.
MOVE-CORRESPONDING L_S_SELECT TO L_R_MATKL.
APPEND L_R_MATKL.
ENDCASE.
ENDLOOP.
reset the index of where we are in the gt_header table
g_tabix = 0.
perform populate_default_variables.
perform get_data.
perform build_detail.
EXIT.
ENDIF. "Initialization mode or data extraction ?
Data transfer: First Call OPEN CURSOR + FETCH
Following Calls FETCH only
First data package -> OPEN CURSOR
IF G_COUNTER_DATAPAKID = 0.
Determine number of database records to be read per FETCH statement
from input parameter I_MAXSIZE. If there is a one to one relation
between InfoSource table lines and database entries, this is trivial.
In other cases, it may be impossible and some estimated value has to
be determined.
DESCRIBE TABLE LT_DATA LINES l_count.
IF g_tabix GE l_count.
RAISE no_more_data.
ENDIF.
*CLEAN UP THE OUTPUT TABLE
refresh E_T_DATA.
LOOP AT LT_DATA FROM G_TABIX INTO LS_DATA.
APPEND LS_DATA TO E_T_DATA.
Set global counter
g_tabix = g_tabix + 1.
ENDLOOP.
G_COUNTER_DATAPAKID = G_COUNTER_DATAPAKID + 1.
ENDIF. "Initialization mode or data extraction ?
ENDFUNCTION.
Forms
***INCLUDE LZBW_TC_FORECAST_SO_EXTF01 .
*& Form populate_default_variables
text
--> p1 text
<-- p2 text
FORM populate_default_variables.
data: wlf_name like tvarv-name.
clear: R_prdh3[], wlf_name.
*get the exclusion range from tvarv for the product hierarchy in
*question
concatenate 'ZBW_EXL_' WGF_PRDHA(6) INTO WLF_NAME.
SELECT LOW FROM TVARV INTO R_prdh3-low WHERE
NAME = WLF_NAME.
move: 'I' to R_prdh3-sign,
'EQ' to R_prdh3-option.
append R_prdh3.
clear R_prdh3.
ENDSELECT.
{Start of insert by SRangaraj on June 29, 2005 >>RD3K915888
CLEAR L_R_LABOR[].
SELECT LOW FROM TVARV INTO L_R_LABOR-Low WHERE
NAME = 'ZBW_TC_FORECAST_LAB_OFF'.
move: 'I' to L_R_LABOR-sign,
'EQ' to L_R_LABOR-option.
append L_R_LABOR.
clear L_R_LABOR.
ENDSELECT.
}End of insert by SRangaraj on June 29, 2005 >>RD3K915888
ENDFORM. " populate_default_variables
*& Form get_data
text
--> p1 text
<-- p2 text
FORM get_data.
data: wlf_lmeng like vbep-lmeng.
*get all deliveries for date range for either a range of product hrchy
*or a like value
refresh int_records1.
if wgf_prdha ne space.
select ivbeln iposnr iKLMENG jvkorg i~werks
imatnr imeins mprdha mmatkl
from vbap as i
INNER JOIN VBAK AS j
ON ( jvbeln = ivbeln
and j~vbtyp = 'C' )
INNER JOIN vbuk AS k
ON ( kvbeln = ivbeln
and k~lfgsk <> 'C'
and k~gbstk <> 'C' )
INNER JOIN vbup AS l
ON ( lvbeln = ivbeln and
lposnr = iposnr
and l~lfgsa <> 'C'
and l~gbsta <> 'C' )
INNER JOIN mara AS m
ON ( mmatnr = imatnr
{Start of insert by SRangaraj on June 21, 2005 >>RD3K915762
and m~lvorm eq ' '
and m~mstae ne '99'
{Start of insert by SRangaraj on June 29, 2005 >>RD3K915888
and m~extwg = '080' )
}End of insert by SRangaraj on June 29, 2005 >>RD3K915888
INNER JOIN marc AS n
ON ( nmatnr = imatnr
and nwerks = iwerks
and n~lvorm eq ' ' )
}End of insert by SRangaraj on June 21, 2005 >>RD3K915762
into table int_records1 where ( i~abgru = ' '
and i~klmeng > 0
and m~prdha like wgf_prdha
and m~matkl in l_r_matkl
{Start of insert by SRangaraj on June 29, 2005 >>RD3K915888
and m~labor in l_r_labor ).
}End of insert by SRangaraj on June 29, 2005 >>RD3K915888
elseif not l_r_prdha[] is initial and wgf_prdha = space.
select ivbeln iposnr iKLMENG jvkorg i~werks
imatnr imeins mprdha mmatkl
from vbap as i
INNER JOIN VBAK AS j
ON ( jvbeln = ivbeln
and j~vbtyp = 'C' )
INNER JOIN vbuk AS k
ON ( kvbeln = ivbeln
and k~lfgsk <> 'C'
and k~gbstk <> 'C' )
INNER JOIN vbup AS l
ON ( lvbeln = ivbeln and
lposnr = iposnr
and l~lfgsa <> 'C'
and l~gbsta <> 'C' )
INNER JOIN mara AS m
ON ( mmatnr = imatnr
{Start of insert by SRangaraj on June 21, 2005 >>RD3K915762
and m~lvorm eq ' '
and m~mstae ne '99'
{Start of insert by SRangaraj on June 29, 2005 >>RD3K915888
and m~extwg = '080' )
}End of insert by SRangaraj on June 29, 2005 >>RD3K915888
INNER JOIN marc AS n
ON ( nmatnr = imatnr
and nwerks = iwerks
and n~lvorm eq ' ' )
}End of insert by SRangaraj on June 21, 2005 >>RD3K915762
into table int_records1 where ( i~abgru = ' '
and i~klmeng > 0
and m~prdha in l_r_prdha
and m~matkl in l_r_matkl
{Start of insert by SRangaraj on June 29, 2005 >>RD3K915888
and m~labor in l_r_labor ).
}End of insert by SRangaraj on June 29, 2005 >>RD3K915888
endif.
sort int_records1 by vbeln posnr.
delete adjacent duplicates from int_records1 comparing
vbeln posnr.
*remove unnecessary records
if not r_prdh3[] is initial.
DELETE INT_RECORDS1 WHERE PRDHA+6(3) IN r_prdh3.
endif.
*get the schedule lines for all of the above records and
*get the lowest schedule line date per so line item
if not int_records1[] is initial.
refresh int_records3.
select vbeln posnr etenr mbdat into table int_records3
from vbep for all entries in int_records1
where vbeln = int_records1-vbeln and
posnr = int_records1-posnr and
lmeng > 0.
sort int_records3 by vbeln posnr etenr mbdat ascending.
loop at int_Records1.
loop at int_records3 where vbeln = int_records1-vbeln
and posnr = int_records1-posnr.
int_records1-mbdat = int_records3-mbdat.
modify int_records1.
exit.
endloop.
endloop.
refresh int_records3. free int_records3.
refresh int_records2.
*get the deliveries and calculate the open quantities
select vbelv posnv vbeln posnn rfmng plmin
from vbfa into table int_records2
for all entries in int_Records1
where vbelv = int_records1-vbeln
and posnv = int_records1-posnr
and VBTYP_N = 'J'. "Dels
*calculate open quantities next
loop at int_records1.
clear wlf_lmeng.
clear int_records2.
loop at int_records2 where vbelv = int_records1-vbeln
and posnv = int_records1-posnr.
case int_records2-plmin.
when '-'.
wlf_lmeng = wlf_lmeng - int_records2-rfmng.
when others. "just add
wlf_lmeng = wlf_lmeng + int_records2-rfmng.
endcase.
endloop.
int_records1-klmeng = int_records1-klmeng - wlf_lmeng.
int_records1-vbeln_dl = int_records2-vbeln.
int_records1-posnr_dl = int_records2-posnn.
modify int_records1.
endloop.
endif.
delete int_records1 where klmeng le 0.
refresh int_records2. free int_Records2.
ENDFORM. " get_data
*& Form build_detail
text
--> p1 text
<-- p2 text
FORM build_detail.
LOOP AT int_records1.
*DO INDIVIDUAL MOVES - ITS FASTER THAN MOVE-CORRESPONDING
move: int_records1-vkorg to LS_DATA-VKORG,
int_records1-werks to LS_DATA-WERKS,
int_records1-matnr to LS_DATA-MATNR,
int_records1-klmeng to LS_DATA-KLMENG,
int_records1-mbdat(6) to LS_DATA-YEARMONTH,
int_records1-meins TO LS_DATA-MEINS,
int_records1-vbeln TO LS_DATA-VGBEL,
int_records1-posnr TO LS_DATA-VGPOS,
int_records1-vbeln_dl TO LS_DATA-VBELN,
int_records1-posnr_dl TO LS_DATA-POSNR,
int_records1-mbdat to LS_DATA-WADAT_IST,
int_records1-PRDHA to LS_DATA-PRDHA,
int_records1-matkl to LS_DATA-MATKL.
APPEND LS_DATA TO LT_DATA.
clear: LS_DATA.
ENDLOOP.
ENDFORM. " build_detail -
In a query, for the selection field 'KNB1-ZWELS' a match-code isn't availab
Hi All,
Creating a query, for the selection field 'KNB1-ZWELS' a match-code isn't available.
Could anyone tell me the reason?
Thanks
GandalfHi,
Match Code Object is not available for the field ZWELS. If required, You need to contact a Developer for creating one . -
No entries exist for the selection-FTR_EDIT
Hi Experts,
I created treasury deal in FTR_CREATE, after save the deal systems is prompting Message express document update terminated User Name so and so, after enter Deal is Created in Company Code. But when I check the deal no in FTR_EDIT system is prompting message "No entries exist for the selection", I checked in table VTBFHA also there also deal no is not showing, if try to create Deal again system is taking next available No for the deal. Please share some ideas if you face same kind of issue.
Thanks & Regards,
AIMHi Feng,
Thanks for your reply.I tried that one also even though i am not able to reslove, please suggest any other solution.
Thanks & Regards,
AIM -
How to provide link for the topics of Webhelp in the Context Sensitive Help in RH10 ?
I am using Robohelp 10 and currently working on Context Sensitive Help in which there is a need to create certain links for the topics that are present in Webhelp. My area of concern is that we can't use map id's since CS Help and Webhelp had already been created and it will be a mess for developers too since they had to relook their code. While generating output we don't give js files to our developers, we just give them folders and css file. Considering all these points, is there any way to provide a link for a topic of Help in Context Sensitive Help? Anyone, Please Help !
I'm not clear on what the question is. You seem to want CSH and to not use Map IDs. That leaves other methods to which Willam has already pointed you. Essentially it's Map IDs or URLs. So are you asking if there is a method that does not involve the developers? No as it is they who must create a link of some sort from a screen to a topic.
You also say you don't give JS files, just folders and CSS. The Rh WebHelp output contains many files and folders and you have to give the whole output or the help will not work properly. Exactly what are you giving them?
See www.grainge.org for RoboHelp and Authoring tips
@petergrainge -
Org unit is not getting defaulted for the selected position in infotype0001
Org unit is not getting defaulted for the selected position in infotype 0001 during the hiring action.
In OM Org. units and positions have been created.
The Org. unit to Position relationship is also created.
But inspite of this, In infotype 0001, the after selecting a position, the Org unit is still getting defaulted to "00000000" instead of the Org. unit Id to which the position belongs. (Please note: At the time of selecting the position, I do structure search and the position is shown under the correct Or. unit)
Have I missed any step?Have u run the RHINTE programmes properly ?
are u able to save the record?
As some times it may be display probolem, if u r able to save the record then check the relationship in pp10/po13.
and U have not answered what Mr. Valeri is asking about your Implementation/support because these type we come accress if data is not uploaded properly.
Regards
vinmax -
List box for the select-options
Hi All
Can anyone send me a sample code to create a list-box for the select-options.Hi vighnesh vasudevan,
Do like this for your select options for low and high also.
Parameters:
p_quat TYPE char20
AS LISTBOX VISIBLE LENGTH 30
LOWER CASE OBLIGATORY.
* AT SELECTION-SCREEN ON VALUE-REQUEST *
AT SELECTION-SCREEN ON VALUE-REQUEST FOR p_quat.
PERFORM fill_quarters.
PERFORM display_quarters.
*& Form fill_quarters
* text
FORM fill_quarters .
DATA:
* Field string to fill quarters in the year
lfs_quarters TYPE LINE OF vrm_values.
REFRESH t_quarters.
lfs_quarters-key = '1'.
lfs_quarters-text = text-qu1.
APPEND lfs_quarters TO t_quarters.
lfs_quarters-key = '2'.
lfs_quarters-text = text-qu2.
APPEND lfs_quarters TO t_quarters.
lfs_quarters-key = '3'.
lfs_quarters-text = text-qu3.
APPEND lfs_quarters TO t_quarters.
lfs_quarters-key = '4'.
lfs_quarters-text = text-qu4.
APPEND lfs_quarters TO t_quarters.
ENDFORM. " fill_quarters
*& Form display_quarters
* text
FORM display_quarters .
CALL FUNCTION 'VRM_SET_VALUES'
EXPORTING
id = 'P_QUAT'
values = t_quarters[]
EXCEPTIONS
id_illegal_name = 1
OTHERS = 2.
IF sy-subrc <> 0.
* MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
* WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
ENDFORM. " display_quarters
Note: I think we are not able to display the list box for select options because i am not ever seen the list box in select options . No Probs try like above code.
See the following like it may help for you
Listbox for Select Options
Regards,
Mahi. -
[INS-32021] Insufficient disk space on this volume for the selected Oracle
Folks,
Hello. I am installing Oracle 11gR2 RAC Grid using Installer whose location is: /home/.../grid/runInstaller.
I am on step 4 of 8 in the Wizard whose contents are as follows:
Oracle Base: /u01/11g_grid
Software Location: /u01/app/grid
Cluster Registry Type: ASM
OSASM Group: dba
When click "next" button I got this error:
" [INS-32021] Insufficient disk space on this volume for the selected Oracle home
Cause - The selected Oracle home was on a volume without enough disk space.
Action - Choose a location for Oracle home that has enough space (minimum of 3,017MB) or free up space on the existing volume. "
I test my "home" directory using the command: [ora11g@rac1 home]$ df -k
Its Ouput:
Filesystem: /dev/sda1 and tmpfs
1K-blocks: 20,308,020 and 848,184
Used: 18,888,968 and 0
Available: 370,816 and 848,184
Use: 99% and 0%
Mounted on : / and /dev/shm
I run another command: [ora11g@rac1 u01]$df -k and got the same output as above.
My questions are:
First, is "Oracle home" the directory "/home/..." or the directory "/u01/..." ?
Second, how to increase the space for the correct directory to be over 3017MB (Minimum) ?
Thanks.Folks,
Hello. Thanks a lot for replying.
I am installing Oracle 11gR2 RAC using 2 Virtual Machines (rac1 and rac2).The Virtual Disk for each VM is 20 GB whose raw device is /dev/sda (partition /dev/sda1 is the same size).
In order to install Grid Infrastructure, I add 5 Hard Disks into the first VM rac1 and 10GB for each Hard Disk.Then create 5 ASM disks respectively as a Disk Group. Let me describe them as follows:
OS Phyysical file: C:\VM_RAC\sharerac\asmdisk1.vmdk (asmdisk2.vmdk asmdisk3.vmdk asmdisk4.vmdk asmdisk5.vmdk)
Corresponding raw devices: /dev/sdb (sdc sdd sde sdf)
Corresponding partition: /dev/sdb1 (sdc1 sdd1 sde1 sdf1)
Corresponding ASM disk: ASMDISK1 (ASMDISK2 ASMDISK3 ASMDISK4 ASMDISK5)
When I run Grid installer step 5 of 8, I select all of 5 ASMDISK as ASM disk group on step 5 of 8 in the Wizard.
The clusterware files are supposed to be stored in the ASM disk group.
But it seems that on step 4 of 8 in the Wizard, the installer install the Oracle Home /u01 into VM rac1 Hard Disk /dev/sda1 and get the above error message - not enough disk space.
My questions are:
First, Why does the Installer store Oracle Home /u01 in /dev/sda1 because it should be in the Disk Group /dev/sdb1 (sdc1 sdd1 sde1 sdf1) ?
Second, Does the Installer go wrongly ?
Third, How to have the Installer store the clasterware files in ASM Disk Group ?
Thanks. -
INS-32021 : Insufficient Disk Space on volume for the selected Oracle Home
Hi
I am trying to install Oracle 11g on my Red Hat Linux 5 (VMWare). I have completed all the pre-requisites realted to Kernel settings, creating groups, users, home and base directories. When I started running the 'runInstaller' and started the installation, it gave me an error saying...
'INS-32021 : Insufficient Disk Space on volume for the selected Oracle Home'.
Anyone any idea what is going on?you haave to switch off vmware add new disk from vmware console. then using format tool you can add partition for unallocated space. and add them in volume.
space increase by adding new disk.
http://muffinresearch.co.uk/archives/2010/03/30/adding-more-disk-space-to-a-linux-virtual-machine/
this is quickest process will help adding disk space .
Regards,
Vinay -
Create link for Journal / share Journal
I can't create links for new (or old) Journals with iPad 3rd gen.
iPhoto works and works, but The options are still grey.
Internet by wifi ok.
There is also enough space in the cloud.
I dont wanna reinstall iPhoto, because i don't want to Loose my Old journals.I found the solution! :)
https://discussions.apple.com/thread/3792664?start=0&tstart=0
Delete the iPhoto-data fom the iCloud and refresh the upload.
Maybe you are looking for
-
Why won't HP Officejet 6700 recognize Word Perfect envelope format
Purchased 6700 to replace 7210 and 7300. Using Think Pad and XP OS. I wrote a business letter on Executive size with the recepient's address in standard way. Word Perfect allows for a return address to appear or not, I chose to appear. Result was rec
-
Hi, I'm trying to make a SOAP call. As part of the SOAP message, I need to pass a string called session id. This doesn't seem possible from the message type, which only represents the SOAP body schema. How do I handle the SOAP header data in XI? R
-
CS6 Upgrade Now Denied to the Annuity Averse
I was told lat year by CDW I could buy a CS6 upgrade forever. Today, Cyber Monday 2014 I am told that upgrade ended the first of October. How can I get a dependable, physical CS6 upgrade and not comply/conform to a monthly annuity
-
I have a 2 TB western digital hard drive connected via USB to my airport extreme (Y2012) that i've been using the past 2 years to connect to wirelessly. The hard drive has 2 partitions, ~1 TB each. 1 partition for backing up, the other for storing me
-
Hello POWL experts! I have created a couple of predefined POWL queries in transaction POWL_QUERY, but I cannot find the way to set the default query which is executed automatically at my POWL application startup. Does anyone know, how could I set it?