To display records fetched from the DB through ALBPM, in a custom JSP

I want to display the records fetched from the database through ALBPM in a custom JSP as a table.
Currently I am fetching the records and putting them in a BPM object group and sending it to the JSP as a BPM object. Now in the JSP I am trying to iterate and create a table to display the fetched data using the JSTL tag ==>
<c:forEach ...... >
</c:forEach>
But I am always getting the following error in ALBPM workspace:
The task could not be successfully executed. Reason: 'java.lang.RuntimeException: /webRoot/customJSP/CustomerSearch1.jsp(29,2) No such tag forEach var in the tag library imported with prefix c'
Though there is a tag forEach var in the JSTL?? How to solve this error or is there any altrnative way to display the records in a JSP ??
Thanks,
Suman.

Hello. I use custom JSP and it works well. You have to make sure 2 things:
a) You have imported the libs, including these lines in your JSP:
<%@ page session="true" %>
<%@ taglib uri="http://java.sun.com/jstl/core" prefix="c" %>
<%@ taglib uri="http://fuego.com/jsp/ftl" prefix="f" %>
b) The variable you are using in the "forEach" statement is stored in the BPM object you pass to the JSP in the call.
Hope this helps.... Bye

Similar Messages

  • Sound recorded from the phone through in-line to Zen V is weak, not loud eno

    I wonder if anyone is trying to achieve the same result with more success. When I record from the phone through a cable to the Zen V and transfer the recording to the computer the sound is not loud enough to be easily understood, despite the fact that on the Zen with the earphones the quality is satisfactory. Can someone help get a louder recording into the computer?TIA

    I have tried that. I had listened to the headphones to monitor the sound. It is the pre-set recording level programed in the player. There should be a way to back it down if needed or set the pre-prog. level to a lower setting on the line-in mode. So far Creative is working with me via e-mail. Hopefully they can remedy my situation. Somehow I think I am not the only one with this problem.

  • Crystal Report Alerts not firing when no records are fetched from the DB

    Hello,
    The crystal report alert i have created in the report in the event of no records being fetched from the query is not firing.  The condition used is isnull ( count(DB Field ) ).
    Is there a limitation with alerts that they would be fired only when some records are fetched in the report.
    Appreciate any pointers
    -Jayakrishnan

    hi Jayakrishnan,
    as alerts require records to be returned here's what you will need to do:
    1) delete your current alert
    2) create a new formula with syntax like
                  isnull(DistinctCount ()) or DistinctCount () = 0
    3) create a new Subreport (which you will put in a report header)
    4) the subreport can be based off of any table
    5) have the subreport record selection always return only 1 record...for performance reasons
    6) change the subreport link to be based on the new formula
    7) the link will be a one way link in that you will not use the "Select data in subreport based on field" option
    8) now in the subreport, create the Alert based on the parameter created by the subreport link
    i have tested this and it works great.
    jamie

  • Recording sound from the PC

    I am currently running a mixer into the front audio input jack on my PC, and have all external stuff (mic, mini disk, etc) coming through that.
    Am I able to set up audition so that it can also record sound from the PC. For example, if I want to grab audio from a you tube video, or have an online voice chat or something enabled, can I open audition and record it? I have tried, but not been successful. My only idea is having to run the audio out of the PC, into a channel in the mixer, and then back into the PC with everything else.
    Any help?

    Evergyro wrote:
    Where is the link?
    This so-called 'forum' has absolutely no use for its FAQs any more. Fortunately, AudioMasters has saved them all, and you can find that particular one here.

  • How the data is fetched from the cube for reporting - with and without BIA

    hi all,
    I need to understand the below scenario:(as to how the data is fetched from the cube for reporting)
    I have a query, on a multiprovider connected to cubes say A and B. A is on BIA index, B is not. There are no aggregates created on both the cubes.
    CASE 1: I have taken RSRT stats with BIA on, in aggregation layer it says
    Basic InfoProvider     *****Table type      ***** Viewed at      ***** Records, Selected     *****Records, Transported
    Cube A     ***** blank ***** 0.624305      ***** 8,087,502      ***** 2,011
    Cube B     ***** E ***** 42.002653 ***** 1,669,126      ***** 6
    Cube B     ***** F ***** 98.696442 ***** 2,426,006 ***** 6
    CASE 2:I have taken the RSRT stats, disabling the BIA index, in aggregation layer it says:
    Basic InfoProvider     *****Table Type     *****Viewed at     *****Records, Selected     *****Records, Transported
    Cube B     *****E     *****46.620825     ****1,669,126****     6
    Cube B     *****F     ****106.148337****     2,426,030*****     6
    Cube A     *****E     *****61.939073     *****3,794,113     *****3,499
    Cube A     *****F     ****90.721171****     4,293,420     *****5,584
    now my question is why is here a huge difference in the number of records transported for cube A when compared to case 1. The input criteria for both the cases are the same and the result output is matching. There is no change in the number of records selected for cube A in both cases.It is 8,087,502 in both cases.
    Can someone pls clarify on this difference in records being selected.

    Hi,
    yes, Vitaliy could be guess right. Please check if FEMS compression is enabled (note 1308274).
    What you can do to get more details about the selection is to activate the execurtion plan SQL/BWA queries in data manager. You can also activate the trace functions for BWA in RSRT. So you need to know how both queries select its data.
    Regards,
    Jens

  • How the data is fetched from the cube for reporting

    hi all,
    I need to understand the below scenario:(as to how the data is fetched from the cube for reporting)
    I have a query, on a multiprovider connected to cubes say A and B. A is on BIA index, B is not. There are no aggregates created on both the cubes.
    CASE 1:  I have taken RSRT stats with BIA on, in aggregation layer it says
    Basic InfoProvider     *****Table type      ***** Viewed at          ***** Records, Selected     *****Records, Transported
    Cube A     *****             blank                 *****           0.624305         *****          8,087,502        *****             2,011
    Cube B     *****                     E   *****                      42.002653  *****                  1,669,126            *****                    6
    Cube B     *****                     F  *****                     98.696442    *****                  2,426,006       *****                    6
    CASE 2:I have taken the RSRT stats, disabling the BIA index, in aggregation layer it says:
    Basic InfoProvider     *****Table Type     *****Viewed at     *****Records, Selected     *****Records, Transported
    Cube B     *****E     *****46.620825     ****1,669,126****     6
    Cube B     *****F     ****106.148337****     2,426,030*****     6
    Cube A     *****E     *****61.939073     *****3,794,113     *****3,499
    Cube A     *****F     ****90.721171****     4,293,420     *****5,584
    now my question is why is here a huge difference in the number of records transported for cube A when compared to case 1. The input criteria for both the cases are the same and the result output is matching. There is no change in the number of records selected for cube A in both cases.It is 8,087,502 in both cases.
    Can someone pls clarify on this difference in records being selected.

    Hi Jay,
    Thanks for sharing your analysis.
    The only reason I could think logically is BWA is having information in both E and F tables in one place and hence after selecting the records, it is able to aggregate and transport the reords to OLAP.
    In the second case, since E and F tables are separate, aggregation might be happening at OLAP and hence you see more number of records.
    Our Experts in BWA forum might be able to answer in a better way, if you post this question over there.
    Thanks,
    Krishnan

  • How to execute BAPIs by getting the input from the user through the browser

    Hi,
    I have created a simple xMII transaction using BAPI. It is a simple BAPI with one input. Now i want the transaction to be executed by getting the input from the user through browser. Once the user enters the value and clicks on a button, I want the result of the BAPI to be displayed in the grid. How to link the BAPI/transaction with applet/Javascript coding.
    Thanks.

    The first thing I would recommend would be for you to collaborate with your colleague Vinodh, since his/her recent thread is very similar to yours:  Calling a BAPI from web page
    In your case, the iGrid applet will run the Xacue query template and automatically display the results from your output parameter.
    I would encourage you to take a look at the sticky thread at the top of the forum entitled "MII Manufacturing Templates Updated" since this MII project is full of samples for you and your colleague to learn from.

  • How to ensure that the query results are fetched from the BW acclerator.

    Hi Experts,
    Suppose if i want to execute the query with BIA option, I can achieve it in RSRT .
    1)But is there some query settings or properties where we can make sure that whenever a query(say Q1) is executed, always the data should be fetched from the BIA index.
    2)Suppose the BIA indexing has failed due  to some reasons, will the data be fetched from the previously updated BIA index??
    regards
    akshay

    Hi man,
    1)But is there some query settings or properties where we can make sure that whenever a query(say Q1) is executed, always the data should be fetched from the BIA index.
    If you have built up BIA index on a cube, then every query on the cube or MultiProvider will automatically use BIA index. No additional settings required. You can use the following way to test whether a query is using BIA or not:
    Go to RSRT, input query name, click 'execute and debug' and check 'Display Statistics Data' and 'Do Not Use Cache'. Execute. After the query result press F3, now you should be able to see statistics. There's a tab 'BIA Access'. If you see something there then it means BIA index is used.
    2)Suppose the BIA indexing has failed due to some reasons, will the data be fetched from the previously updated BIA index??
    If BIA rollup is failed, then the last request(s) would not available in reporting and query will use BIA index for earlier requests. You can consider it like aggregate. But if initial fill of BIA failed then you would not be able to use BIA index.
    Regards,
    Frank
    Edited by: Frank Lee on Jul 14, 2009 2:22 PM

  • I can not get real audio player to record videos from the internet, I believe the problem is that my Firefox browser is set for 64 bi... i need to change it to 32 and do not know how.

    I can not get real audio player to record videos from the internet i use firefox as my browser on windows 7, I believe the problem is that my Firefox browser is set for 64 bi... i need to change it to 32 and do not know how.

    dont know what to do

  • How to parse XML string fetched from the database

    i want to parse the XML string which is fetched from the oracle database.
    i have inserted the string in xml format in the database. The type of the field in which it is inserted is varchart2.
    I am successfully getting it using jdbc, storing it in a String.
    Now it is appended with xml version 1.0 and string is ready for parsing.
    Now i am making following programming.
    DocumentBuilderFactory factory = DocumentBuilderFactory.newInstance();
    DocumentBuilder builder = factory.newDocumentBuilder();
    Document doc = Builder.parse(xmlString);
    Element root = doc.getDocumentElement();
    NodeList node = root.getElementsByTagName("product");
    But i am getting IOException at the statement
    Document doc = Builder.parse(xmlString);
    there fore i request u to kindly help me in solving this error.
    -regards
    pujan

    DocumentBuilder does not have a method parse with xml string as aparameter. The string should be a xml document uri.
    Convert xml string to StringReader.
    parse(new InputSource(new StringReader(xmlString)));

  • Periodic Alert-How to send all the records returned from the SQL in a mail?

    Hello all,
    I have defined a Periodic Alert, my SQL query returns more than one record whenever I run it. I also defined an action to send an email with the message consisting of the output variables from the SQL. Whenever i run this alert, a mail is being sent for every single record returned from the query. But i want to send a single mail containing all the records information that my SQL query returns.
    For Example: My SQL query lists all the users created on current date.
    Select User_Id, User_Name into &OUTPUT1, &OUTPUT2
    from fnd_users where trunc(creation_date) = trunc(sysdate)
    Now i want to send a mail with all the users information from the above query, to SYSADMIN. How can this be achieved?
    Thanks & Regards
    chakoo

    Hi Chakoo,
    If the Periodic Alert is not working as requried. You can write a simple package with 3 procedures to implement the writing output to a out file and simultaneuosly send email to multiple receiptents.
    Example:
    Create Package xx_pac
    Create public Procedure P1
    begin
    Select User_Id, User_Name into &OUTPUT1, &OUTPUT2
    from fnd_users where trunc(creation_date) = trunc(sysdate)
    fnd_file.put_line (fnd_file.output, &OUTPUT1, &OUTPUT2);
    end;
    (Create private Procedure P2
    begin
    ---Write the email package using the UTL_SMTP approch. Using this approch you can send the procedure P1 output file as an attachment to the desiginated receiptents.
    end;
    (Create public Procedure P3
    begin
    ---call the procedure P1 using the "g_request_id = fnd_request.submit_request"
    ---Wait for the above procedure to complete using "l_conc_status := fnd_concurrent.wait_for_request" procedure.
    ---call the procedure P2. (When called you must provide the correct to, from address)
    end;
    end;
    Register the Package xx_pac as a concurrent program and schedule when submit it from the request.
    Regards
    Arun Rathod

  • HT201322 Cannot hide my purchases from the pc through. I previuosly could but now i cant has to be some problem

    Cannot hide my purchases from the pc through iTunes. I previuosly could but now i cant.

    There have been a few posts over the last few days from other people having the same problem - I also can't currently hide or unhide items on my computer's iTunes. I assume that there is a problem at Apple's end.

  • After ios6 update, I have lost all control of audio via Bluetooth, plus my Bluetooth car radio is no longer displaying track information from the iPhone. Help!

    After ios6 update, I have lost all control of audio via Bluetooth, plus my Bluetooth car radio is no longer displaying track information from the iPhone. Help!

    Hi there,
    You're running an old version of Safari. Before troubleshooting, try updating it to the latest version: 6.0. You can do this by clicking the Apple logo in the top left, then clicking Software update.
    You can also update to the latest version of OS X, 10.8 Mountain Lion, from the Mac App Store for $19.99, which will automatically install Safari 6 as well, but this isn't essential, only reccomended.
    Thanks, let me know if the update helps,
    Nathan

  • I believe I have implemented it correctly but I am not receiving the notifications on my phone. I have an ad hoc provisioning profile set up.  I have the device token from the phone through NSLOG to console. I have the dot net code running without errors.

    I believe I have implemented it correctly but I am not receiving the notifications on my phone. I have an ad hoc provisioning profile set up.  I have the device token from the phone through NSLOG to console. I have the dot net code running without errors.The notifications just don’t appear.
    Any ideas where I am going wrong?

    IMAP account access by itself does not provide for syncing contacts, calendar events, and notes or anything over the air. This is possible with an Exchange account accessed via ActiveSync with the Exchange Server.
    If your company email account is an Exchange Account, your company's IT Dept. has enabled IMAP account access for your Exchange account on the Exchange server?
    If an Exchange account, the IT Dept. must have ActiveSync enabled for your account on the Exchange Server to create and access the account as an Exchange account which provides Push access for received messages, and over the air syncing for contacts and calendar events with the Exchange Server.

  • My iPod display is separating from the chrome back and there are no close apple stores what should I do?

    My iPod display I separating from the chrome back. There are no close apple stores. What should I do?

    If covered by warranty, and not abused Apple will exchange it at no cost. You can send it to Apple See:
    Apple - Support - iPod - Service FAQ
    Otherwise,
    Apple will exchange your iPod for a refurbished one for this price. They do not fix yours.
      Apple - iPod Repair price

Maybe you are looking for

  • Apple dvd player / external dvd drive issue

    i recently bought a LaCie d2 external dvd drive, since my desktop g4 only has an internal cdr drive. I am running osx 10.4.3, which i installed through this dvd drive. yet now, when i put a DVD movie into the drive and try to open Apple DVD Player, i

  • DB on Aix/Oracle, CI Sap on Windows : supported or not ?

    I'm looking for informations about a scenario where the Database is on Oracle/Aix, while the Sap central Instance is on Windows 2003 64 bit. I found note 80266, but it refers to a link on sapnet now replaced with the advise to come here in SDN. I'm n

  • Taxability of Vendor non-PO Invoices

    Hi All, We are using tcode FB01 and/or FB60 to post non-PO invoices. The invoice will accrue taxes ifthe expense account line item is entered first and then the offsetting vendor line is entered.  If the vendor line item is entered first and expense

  • BW 3.x : Increase Background processes for one loading

    Hello, in BW 3.x, I must load cube1 into cube2 (cube2 is a cube1's copy). => During loading, time process is due to writing fact table. I decrease parameter (infopackage parameter), in order to increase performance : Maximum size of a data packet in

  • Certain Websites Cause Problems

    I recently migrated a user account from my G4 Mac Mini to a new MacBook. It has been working great; however, certain websites no longer work in Firefox on the mac. One example is this website: http://homes.timesunion.com/sales/SearchIndex.asp It no l