To Find the Number of Execution of the same Documnet Number

Hi,
As i am working in one report, I would need to find a solution for the following problem.
If i execute a report with a PO number as input, i want to know in which time this same PO number is getting executed through my report.
Thanks In Advance,
Prabu

Hi,
Please use GET TIME STAMP command before running your logic on PO and after completion like as follows:
DATA: l_ts_start type timestamp,
l_ts_end type timestamp,
l_total_time type i.
GET TIME STAMP FIELD l_ts_start.
Your logic of handling PO
GET TIME STAMP FIELD l_ts_end.
l_total_time = l_ts_end - l_ts_start.
l_total_time gives you total time taken for processing you PO(s).
Regards,
Prasanth

Similar Messages

I deleted the pre-installed iPhoto app from my iPhone 5s by mistake. And I can't find the same app in the App Store. How do I recover it?

I deleted the pre-installed iPhoto app from my iPhone 5s by mistake. And I can't find the same app in the App Store. How do I recover it?

iPhoto for iOS is no longer being offered by Apple and has been replaced by the Photos app. It is not compatible with iOS 8. This Apple document may help: Migrating from iPhoto for iOS to Photos on iOS 8 - Apple Support

On my Iphone, I have an app called Voice memos where I can record someone talking or signing. I try finding the same on my Ipad but can't find it. Does it exist on Ipad?

On my Iphone, I have an app called Voice memos where I can record someone talking or signing. I try finding the same on my Ipad but can't find it. Does it exist on Ipad?

No, but there are plenty of Apps which will do this.
Se this one for example:
https://itunes.apple.com/us/app/voice-memos-for-ipad/id364295267?mt=8

Using ios6 on my iPad I can no longer swipe to hide an app in the App Store. Still works on all other ios and devices. Anyone find the same?

Using ios6 on my iPad I can no longer swipe to hide an app in the App Store. Still works on all other ios and devices. Anyone find the same?

The feature no longer works in iOS 6 so you must not have updated your other devices yet.

I purchased a new laptop. I'm trying to find the same version of Acrobat Pro 9.5 I have on my old laptop to install on my new computer. Any help?

I purchased a new laptop. I'm trying to find the same version of Acrobat Pro 9.5 I have on my old laptop to install on my new computer. Any help?

I'm using an iMac with the newest OS X Yosemite. I tried to reinstall Creative Cloud, removed all the programs. But I still get the 'old' 2014 version with the Lionhead, not the Sunglasses (october 2014) with interactive libraries. I use Adobe iPad apps, for instance Adobe Brush, Adobe Shape and Adobe Color and it's so great to have all the things you make with these apps in your Illustrator & Photoshop libraries. Somehow it worked om my laptop, but not om my home computer.

Complicated Question (see pdf): Use data from one table to find the same data in a second table and take other data from that table and place it in a third table. :)

I don't even know if this is posible.
I'm using iwork '09
View PDF

I hope I can clarify:
For our purposes here:
Table 1 = "Step 2 - Product Sizes"
Table 2 = "Option id Master"
Table 3 = "Export - Product Info"
Table 1:
The user would enter values for "productcode," "Horz," and "Vert"
"Size" would auto fill based on values in Horiz and Vert (I have this taken care of already).
Table 2: This is a completely static table that I want to search against. - Data from other tables in the doc does not alter or change the data in this doc.
We just want to look at table 2. Find the existing value in "table 2 : size" column that matches the "table 1 : size" column and then pull the "optionids" and "productprice" from that row.
Can the value from "Table 1 : Size" be used as a search term in "Table 2 : Size?"
Table 3: The user does not enter any values on this table.
"productcode" is pulled from table 1 - "Table 1 :: A5" = "Table 3 :: A5"
"optionids" and "productprice" are pulled from Table 2 columns "D" and "E" - however we do not know which Table 2 row it is pulling from until we enter data in Table 1.
As I'm writing this I'm realizing that
A. this is probably really confusing to you.
B. this may be impossible inside of numbers.
If you have some other method that would facilitate the same out come but be structured differently please let me know.
--- maybe to help you understand further what I am doing here is my current workflow:
I record the size of a piece of art.
Then I manually go to my "Option id Master" and find the same size.
I then copy the corresponding "optionids" and "productprice" cells. (these options control the prices displayed on my website)
I got to my "Export - Product Info" table and paste the values in the corresponding cells.
I was hoping to automate this as it takes a long time when you have hundreds of products.
Thanks for the help!

Our exchange server crashed and we lost all contact and calendar data. We found an app to get the contacts off of people's phone to import but can't find the same for calendar. How do I get my calendar info off my phone and in to new exchange server?

Our exchange server crashed and we lost all contact and calendar data. We found an app to get the contacts off of people's phone to import but can't find the same for calendar. How do I get my calendar info off my phone and in to new exchange server?

You'd have to think through this, but it seems like if you are using Outlook, and the items vanished from the Outlook client as well as the server,that you could re-populate Outlook using iTunes.

No credit card and cant find the same items anywhere e

I decided to purchase a zen vision M dock and video cable from the official creative site as i cant find the same items anywhere in a high street shop or anywhere online. I was halted by the fact i don't have a credit card tho i do have debit card, does anyone know how i can
* purchase the above items from creative or
2* buy the same items else where if so anyone have some links?
Thanks.

<IMG height=0 alt="" src="https://secure.creative.com/images/dot-clear.gif" width=0 border=0><IMG height=3 alt="" src="https://secure.creative.com/images/dot-clear.gif" width=0 border=0>We accept Visa, MasterCard, Discover, and American Express credit cards. We also accept Visa and MasterCard debit cards with a Visa or MasterCard logo on front. If you wish to pay by check, call us at -800-998-000 Monday through Friday, 9AM-6PM, Central Time.All orders are calculated and billed in US dollars.
For buying elswhere....try to put in the item name in popular searchmachine like Google...Yahoo and so on
Good luck

Finding the same value in different columns

Hello,
I am trying to figure out how I would go about finding the same value in the same row but in different columns. For example, in the table sometimes the report name is the same as the description. I would like to find all of the rows where this is the case.
Thanks
Report name
Description
Date
Time
Report 1
Report 1
dddd
tttt
Report 2
Billing Report
dddd
tttt
Report 3
Report 3
dddd
tttt

Hi,
Is this what you want?
SELECT *       -- or whatever columns you want
FROM    table_x
WHERE   report_name = description
If not, post a little sample data (CREATE TABLE and INSERT statements, relevant columns only) for all tables involved, and also post the results you want from that data.
Explain, using specific examples, how you get those results from that data.
Always say which version of Oracle you're using (e.g., 11.2.0.2.0).
See the forum FAQ: https://forums.oracle.com/message/9362002

How do I export my video in 500x500 resolution? I know there's a feature in Final Cut Express that allows me to make custom dimensions when I export but I can't find the same in FCPX

How do I export my video in 500x500 resolution? I know there's a feature in Final Cut Express that allows me to make custom dimensions when I export but I can't find the same in FCPX.

Tom is right, BUT! ...the newest version of Compressor (41.) allows you to do just THAT! ...to export custom sizes.
It's easy. And... once you set it up, you can export DIRECTLY from FCPX, provided you've saved / added this scheme as a "destination" in the FCPX app.

Extremely difficult to toggle switches on and off in settings in iOS6, on multiple devices, iP5, 4S, 4 and new iPad. Are others finding the same issue?

Extremely difficult now to toggle switches on and off in settings in iOS6, on multiple devices, iP5, 4S, 4 and new iPad. Are others finding the same issue?

I solved this by reset of the Wifi (unplug cable and power to both modem and wifi ... wait 60 sec ... plug in modem cable and power ... plug in wifi power and LAN to modem ... restart AppleTV and Mac ... Turn Home Share 'OFF' in iTunes then back "ON" ... it took ~60 sec for the AppleTV to pick up my Mac in computers.

Permissions Repair keeps finding the same problems

I am finding that the Permissions Repair, while it informs me that it has repaired permissions on my Intel-powered 24-inch iMac, is not in fact doing so. It keeps finding the same errors. What is going on?

"In general", we shouldn't worry too much about what repair permissions finds. But, your case is a little odd, in that it finds the same thing each time. Yes, subsequent repair permissions "should" be nada...nothing found. Try running Repair Disk and see if that helps. (run Repair Disk from an OS Install or recovery disk; or from another volume containing OS X)
HTH

What is HMRIC Number in MM Classification and where did we find the same.

Hi,
Please help me in find the below question
What is HMRIC Number in MM Classification and Where did we find it?
Thanks and regards,
Gautam kumar

What is HMRIC Number
First of all, can you tell me what do you mean by HMRIC ??
G. Lakshmipathi

Find the same amounts

Hi All,
I have this sample data:
create table sampleTable(
sample_id number,
sample_fy number,
sample_amt number
insert into sampleTable(sample_id, sample_fy, sample_amt)
values(1, 2003, 25);
insert into sampleTable(sample_id, sample_fy, sample_amt)
values(1, 2004, 10);
insert into sampleTable(sample_id, sample_fy, sample_amt)
values(1, 2005, 10);
insert into sampleTable(sample_id, sample_fy, sample_amt)
values(1, 2006, 46);
insert into sampleTable(sample_id, sample_fy, sample_amt)
values(2, 2003, 5);
insert into sampleTable(sample_id, sample_fy, sample_amt)
values(2, 2004, 12);
insert into sampleTable(sample_id, sample_fy, sample_amt)
values(2, 2005, 10);
insert into sampleTable(sample_id, sample_fy, sample_amt)
values(2, 2006, 6);
insert into sampleTable(sample_id, sample_fy, sample_amt)
values(3, 2003, 75);
insert into sampleTable(sample_id, sample_fy, sample_amt)
values(3, 2004, 13);
insert into sampleTable(sample_id, sample_fy, sample_amt)
values(3, 2005, 13);
insert into sampleTable(sample_id, sample_fy, sample_amt)
values(3, 2006, 26);
How can I find the rows with same amounts (amt) for the same sample_id and years between 2004 and 2005?
The result should be:
sample_id
1
3
I try lead, but it is comparing rows from different sample_id as:
SELECT sample_id, sample_fy, sample_amt,
       LEAD(sample_amt, 1, 0) OVER (ORDER BY sample_id, sample_fy) - sample_amt AS my_diff
       FROM sampleTable
       WHERE sample_fy between 2004 and 2005;
Any ideas?
Maybe is another function that I can use.
Thanks!

Hi,
I would use GROUP BY:
SELECT    sample_id
FROM      sampletable
WHERE     sample_fy IN (2004, 2005)
GROUP BY sample_id
HAVING    COUNT (DISTINCT sample_fy) = 2
AND       COUNT (DISTINCT sample_amt) = 1
This does not assume that there will be esxactly 1 row for each combination of sample_id and sample_fy. A given sample_id may be missing one year or the other (in which case it will not produce any output), or there may be multiple rows per year (in which case, the sample_id will be chosen only if all they are all equal. I assume sample_amt can not be NULL).
If you want to use LEAD, add a PARTITION BY clause:
SELECT sample_id, sample_fy, sample_amt,
        LEAD(sample_amt) OVER (
                                PARTITION BY sample_id    -- This line added
                                ORDER BY      sample_fy    -- No point including sample_id
                             ) - sample_amt AS my_diff
       FROM sampleTable
       WHERE sample_fy between 2004 and 2005;
"PARTITION BY sample_id" means that a separate computation will be done for each group of rows that has the same sample_id.

Find the same day in a range then find the difference between the days

Need assistnace with the following .
I have a table of ids for courses and each course class is on a day. I have to take the first day the course class is on and find the next same day then work out the difference in days.
eg. a course class is on a saturday then have to go thru the course class associated to a course and find the next saturday then work out the difference.
Anyone able to help - it would be much appreciated

course class id date day
abcdefa 18/12/2002 wednesday
abcdefb 19/12/2002 thursday
abcdefc 20/12/2002 friday
zxvyza 17/12/2002 monday
zxvyzb 20/12/2002 thursday
zxvyzc 21/12/2002 friday
zxvyzd 24/12/2002 monday
zxvyze 26/12/2002 wednesday
lmnopa 11/11/2002 tuesday
lmnopb 12/11/2002 wednesday
lmnopc 14/11/2002 friday
lmnopd 19/11/2002 wednesday
lmnope 21/11/2002 friday
where abcdefa, abcdefbc, abcdefc are for course id abcdef
and the other set of course class ids are for course id zxvyz.
and 3rd set relates to course id lmnop.
expectation:
the difference between days for the first set of data to be 0
the difference between days for 2nd set to be 7 days (ie. take the first day for the course class and see if can find another that is the same and then work out the difference i.e monday) then return the difference then go to next course class id.
the diff between 3rd set is calc the diff between Wednesdays, ignore the last friday and find the next course class id. the answer here will be 7 days.
I have worked out the days from the dates (although the above is only an example)but wasnt sure how to pick the same days then work out the difference and then move to the next course class id. Some course classes wont have another same day.

I do hv Invoice form in English, need to find the same one in other languag

Hi,
I hv Invoice smartform meant for Malaysia. If I go to VF03>Menu>Go To>Header>Output and there (where we can see Green & Red traffic lights) If I select the MS-Malaysia option from the drop down under the LANGUAGE column.......I can see the output preview in Malaysia, fine.
In the same way, If I select the ENGLISH, then, I can see the output in English, fine.
But, I hv seen some descripencied in MAIN table header portion. Mainly am facing issue in Malaysia form, so, i need to debug that one!!
But, i got a form name from functional guy, its totally in english, with which i can not do debugging!!
So, pls. let me know that, How Can i find the associated same form for Malaysia laguage? I checked NACE, TNAPR sources already, no use!! Functional guy is on vacation.
Thank you

Thank you.
Am on 4.6c version.
Can ypu pls. tell me What is the navigation for smartforms in SE63? bcoz, there Menu, Transalations, ABAP etc etc, i tired but, did not get succeded!! Or How to know what r the transalations are assocciated/attached to my smartform?
thank you
Edited by: ABAP_SAP_ABAP on Mar 3, 2010 3:34 PM

To Find the Number of Execution of the same Documnet Number

Similar Messages

Maybe you are looking for