To get evt_creation_date and _evt_creation_time data in a function module

Hi gurus,
How do we get evtcreation_date and evtcreation_time data into check function module or implementation of object type? I am using cdhdr and cdpos and able to write my own logic.
Thanks in advance!!!
Xevi G.

I think check FM's contain these value in any paramters.
Otherwise check CDHDR/CDPOS with appropriate OBJECT number etc.
This question can more appropriately answered in WORKFLOW forum.
Try [this|http://www.*******************/2007/09/work-flow-2.html] link also.

Similar Messages

Get purchase order doc date using BAPI function module

Hi,
I have a .net windows application that uses BAPI_PO_GETDETAIL function module to get particular details of a PO in SAP. But i am not able to get the "Doc Date" for a particular PO. I am able to get all the details of items from the table "PO_ITEMS ". I used only 1 input parameter "PURCHASEORDER".
Please help me to get this thing done
.netframework : 4.0
Language: C#
Visual Studio: vs 2010
Regards,
Manosh Jacob

Absolutely hynek petrak..
Manosh Jacob You can go with the above technique.

How to get header and item data in ME_PROCESS_PO_CUST ?

Hi all,
How can I get header and item data in me_process_po_cust~process_account ? I have to do some validation for account assignment catagory in item overview.

Hi ,,
Further make the following changes in method IF_EX_ME_PROCESS_REQ_CUST~PROCESS_ITEM.
Get Line item data using method:
CALL METHOD IM_ITEM->GET_DATA
RECEIVING
RE_DATA = W_ITM_DATA.
and then validate the item data from structure W_ITM_DATA..
Same as follows for Header Records:
In method IF_EX_ME_PROCESS_REQ_CUST~PROCESS_Header.
Thanks
Shambhu

Function Module to get BEGIN and END date of a month?

Hello everybody,
Is there any function module to get BEGIN and END date of a month
GIVEN EITHER THE CURRENT SYSTEM DATE or MONTH?
Regards,
Sanghamitra.A.

hi
     CALL FUNCTION 'PA03_PERIODDATES_GET'
        EXPORTING
          f_abkrs               = p_abkrs1
        IMPORTING
          f_permo               = wf_permo
          f_current_begda       = wf_begda
          f_current_endda       = wf_endda
        CHANGING
          f_current_period      = wf_pabrp
          f_current_year        = wf_pabrj
        EXCEPTIONS
          pcr_does_not_exist    = 1
          abkrs_does_not_exist = 2
          period_does_not_exist = 3
          OTHERS                = 4.
      IF sy-subrc <> 0.
        MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
            WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
      ENDIF.
this is the function module to get the first date and last date of a particular month
if u have any doubts ask
regads
karthik
reward points if useful

Get first and last date of month

Hi,
Is there any function module to get first and last date of month for a entered date.
Please let me know.
Regards,
SP

Hi,
Use the below FM to find the Last day of month and them u can easily calculate the first day.
DATA : v_startdate TYPE sy-datum.
DATA : v_enddate TYPE sy-datum.
DATA : v_temp TYPE dats.
v_temp = sy-datum.
CALL FUNCTION 'RP_LAST_DAY_OF_MONTHS'
    EXPORTING
      day_in            = v_temp
    IMPORTING
      last_day_of_month = v_enddate
CONCATENATE v_enddate+0(6) '01' INTO v_startdate.
Hope it helps.
Regards,
Arnab.

Getting first and last dates of a month

Jello all,
I am really sorry I am posting this topic here, not actually owned by this forum but in fundamental forum i am not getting it attended.
I am generating monthly, quartelry and yearly reports, for which I need to get first and last dates of a given Month taking in to account leap year. I searched the API and docs for Calendar class. I could not find any useful methods / fields. I wonder this being a very common requirement, how SUN has not provided these essential features. I still feel, it must be some where. Please help me and reply. Also if you came across any other forum for util package, let me know.
Thanks
Varde

Jello all,
I am really sorry I am posting this topic here, not
actually owned by this forum but in fundamental forum
i am not getting it attended.
Yes, and I can see you are a very patient person, waiting a whole half hour for a response before cross posting other boards.
Question answered.
http://forum.java.sun.com/thread.jsp?thread=514908&forum=31&message=2451646

FM to get start and end date when given month

Hi all,
can anybody help me if there a FM to get start and end date when given month like 01 for jan.
Thanks in advance
Sahitya

Hi,
Check this Function Module
HR_JP_MONTH_BEGIN_END_DATE
here if you r giving the month u wil get the start date and the end date.
Hope this helps you.
Thanks & regards,
Y.R.Prem Kumar

Generic Data Source with Function Module data mismatch in BI

Hi All,
I'm using Generic Data Source with Function Module, When I execute the Function Module (Which I have Created), I'm getting 16000 records and when run extractor(in RSA3) im getting different no.of records(infact they are more no.).
when I run the InfoPackage in BI im Getting more no. of records than what i got executing the function module..
and single record is divided into 2 records in BI side(not all the records), how can it be possible???
is there anything Im missing to explain you my issue???
if understood please help me out.
Thanks n Regards,
ravi.

the datasource frame work starts the function module several times.
1. the initialization
2. the serval times, until you "raise no_more_data".
check you coding: have you refreshed necessary internal tables.
Sven

Generic Data Source with Function Module data mismatch

Hi All,
I'm using Generic Data Source with Function Module, When I execute the Function Module (Which I have Created), I'm getting 16000 records and when run extractor(in RSA3) im getting different no.of records(infact they are more no.).
when I run the InfoPackage in BI im Getting more no. of records than what i got executing the function module..
and single record is divided into 2 records in BI side(not all the records), how can it be possible???
is there anything Im missing to explain you my issue???
if understood please help me out.
Thanks n Regards,
ravi.

HI rkiranbi,
1. FIrst you excute function module according to your paramers, you will get some records. then goto tcode RSA3 --> excute
Provide your Data source name and under setting we have options like Data records/calls, Display extractor calls and selections --> fields .
in that options you have to increase the values. and then you have to pass paramers in RSA3 according to your function module
selections in SE37. Now you will get equal values in both functin module selection and RSA3 Selection. if it fail means you need to
check coding logic in function module.
2. if your are getting wrong values in BI System then check with
              1. compare with PSA data and data target data (here you need to check with characterstic as well as keyfigures)
              if you find any mistake you need change the coding in function module according to client requirement.
              2. compare data with RSA3 and bi report data or data target data.
                             check it properly above steps, you will get solution.
thanks and regards,
malli

MRBR Report- Price and qty variance tables/structure/Function module

Hi
I am in the process of developing a customised report similar to MRBR report. I am not very clear on the logic used for "Difference Qty" and "Difference Value".
MRBR is taking values from strucrure ARSEG. Is anybody aware if there are any tables from where we can get this information ? Are there any Function modules that SAP uses to arrive at this difference.
I am aware that we canget the information from EKBE table and calculate our seleves. At times the values do not match and the logic do not seem to be straight forward.
Has someone worked around this area ?
Thanks for your time in advance.
Dasaradh

Hi,
RBKP_BLOCKED is one important table from where this program gets the blocked invoices.
Hope this helps.

How to add Test data for a function module

Hi experts,
i want to add test data for a function module . i don't know how to proceed on it . please help me...
with regards,
James...
Valuable answers will be rewarded...

Hi,
- Go to SE37 and execute your FM
- Enter the data you want to pass to FM
- Hit 'Save' button. Enter the meaningful name for your test scenario and save. That's it you have saved the test data.
You can also enter some other test data and save that also. In short, you can save multiple test scenario. Also, you can give multiple test scenario a same name and they do not overwrite each other ( but normally you give different name to differentiate them)
Next time you come to execute the FM again, hit the "test data" button and it will show you all the test scenario you have stored before. Select the one you want to use and it will load the data in FM parameters.
Let me know if you need any other information.
Regards,
RS

Updation of material data using a function module

HI
i want to update fields in the mvke table,but the field is a Customer field in the table, not sap table field.i want to update the field using a program , not going to mm02. which function can i use for the updation.There is a function module MATERIAL_MAINTAIN_DARK for updation,will this funtion module update the customer fields also. Can anyone tell me about this function module and how to use this function module or MATERIAL_MAINTAIN_DARK.

Using the function Module BAPI_MATERIAL_SAVEDATA , you can also update the custom fields.
This is the documentation for the extension fields:
<b>Reference Structure for BAPI Parameters EXTENSIONIN/EXTENSIO
Description
    You use this structure to transfer the material's customer-defined
    fields. For information on transferring these fields, see the function
    module documentation.
Note
    Besides the table fields already defined, customer-defined table fields
    can also be supplied with data. Since these fields are created by the
    customer, they are known only during the runtime and must therefore be
    determined dynamically.
    The structures BAPI_TE_<NAME> (<NAME> = MARA, MARC, MARD, MBEW, MLGN,
    MLGT, MVKE) and the relevant checkbox structures BAPI_TE_<NAME> (<NAME>
    = MARAX, etc.) must first be extended by the customer to include the
    fields required. The standard structures contain only the corresponding
    key fields. When including new fields in these structures, make sure
    that the field has the same name as the field in the database table. In
    addition, the fields in the structures BAPI_TE_<NAME> may only be of the
    type CHARACTER. The data element BAPIUPDATE must be used for the fields
    in the checkbox structure (except for key fields).
    The two parameters EXTENSIONIN and EXTENSIONINX are used to transfer the
    data to the method. The field STRUCTURE contains the name of the
    structure (for example, BAPI_TE_MARA or BAPI_TE_MARAX) used to identify
    the work area (for example, WA_BAPI_TE_MARA or WA_BAPI_TE_MARAX) to
    which the data is transferred. The remaining fields for the parameter
    EXTENSIONIN or EXTENSIONINX contain the data for the key fields (for
    example, the material number) and the data for the customer-defined
    fields. The number of characters reserved in the two parameters for the
    content of a customer-defined field must be the same as the number of
    characters for the corresponding work area field. If the number of
characters required is smaller, the remaining characters in the two
parameters must be filled with blanks. Only then may the content of
another field be transferred. Here too, remember that the data is
written to the database only if the corresponding indicator has been set
in the work area.</b>
Regards,
ravi

Delta Problem while extracting the data by using function module

Hi Experts,
I have extracted the data by using Function module, for delta loads I have given Calday and additive delta in Generic delta settings, in BW side I have initialized the data after that I have given delta update option in infopackage and I made process chain also, every day process chain is running successfully but it is showing zero records, but there is a data in Data source (RSA3), means delta is not working.
What is the problem,
Is there any another settings for delta loads,
Please help me to do this,
Helpful answer will be appreciated with points,
Regards,
Venkat

Hi,
Try this delta type :NEW STATUS FOR CHANGED RECORDS.
More information from Nagesh, this information may help
1. New status for changed Records.
2. Additive delta.
New status for changed records means
New Order
order no quantity
1000 10
order changed to quntity 8. then 2 records will posted 2 BW in first case.
1000 -10
1000 8
if you come to Additve delta.
for the same case it will send the same record as
1000 10
changed records
1000 -2
this is the difference. New status with changed records should be used only in association with ODS not cube becoz we don't have overwrite option.
Additive delta we can use for ODS and Cubes with update mode Addition.
Regards,
Satya

How to extract data by using function module in generic extraction please

how to extract data by using function module in generic extraction please give me steps required

Dear Deba,
Generic Extraction via Function Module
/people/siegfried.szameitat/blog/2005/09/29/generic-extraction-via-function-module
If the requirement is like extracting data from multiple tables with some complex logic then views cannot be used..so u cna go for FM is used where it can be achieved.
Chk these
/people/siegfried.szameitat/blog/2005/09/29/generic-extraction-via-function-module
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/a0f46157-e1c4-2910-27aa-e3f4a9c8df33
check the following thread
generic extraction with function module
Generic Extraction with function module
Regards,
Ram.

How to get new and updated data into LO Excel in Xcelsius

Dear Experts,
I have created dashboard on top of webi report by using Live-Office connection. Latest data of webi report is imported into excel and mapped data with components and generated SWF file and exported into server.
To day my webi report has latest instance with new and updated data. But until unless by clicking "Refresh All Objects" i am not getting updated data into excel.
When i am trying to open dashboard in BI Launch Pad/CMC it is showing data whatever exist in excel(i.e yesterday data). But here we need to show data of latest instance of webi report.(i.e New and updated data as of now).
I have selected option "Latest instance: From latest instance scheduled by" in "refresh options".
My Question & Doubts:
1) Is it mandatory to open dashboard every day and need to click on "Refresh All Objects" to get updated data into excel or dashboard.
2) Is there any option to automate this process.
Regards,
PRK.

Hi,
Schedule the webi report to get the latest data from the source. To answer your query no is doesn't require to open the dashboard every time to refresh the excel to get the latest data.
Please use the Refresh Before Components are Loaded: Select this option to refresh the data each time the model loads and to use that data as the initial data for the model (using a Reset Button component, it will reset the data to the values from the last time the model was loaded).
You are using the Live Office so here automatic refresh is not possible without touch the swf file, you need to use the refresh but to get the latest data. If you are using QAAWS, Web Service & XML then automatic refresh is possible.
For more information please check the below document for in-depth idea on the design pattern.
http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/b02e31fb-3568-2e10-e78f-92412c3c0a96?overridelayout=t…
Kindly revert for more clarification!!!
--SumanT

To get evt_creation_date and _evt_creation_time data in a function module

Similar Messages

Maybe you are looking for