To Get Print Desired Page No

Hi All,
I have prbolem to get print desired starting page No e.g
I have a Parameter of Page No as user entered page No 1 it should get start page No 1 Sequence should be 1,2,3....onward till report ends.If user enter
start page No 5 Sequence should be 5,6,7....onward till report ends.Similiarly If user enter 10 sequence should be 10,11,12,13....onward till end of reports
I have tried a lot but failed to get any solution.Any Body has idea I would be damn thankful to him.
yours truly
Khurram Siddiqui

You can use srw.get_page_num() in a PL/SQL format trigger and then use srw.set_field_num(pageNumber + :userParameter);

Similar Messages

When I start mozilla or open any link in a new window I get the desired page to load but an additional new tab page opens up along with it, fix?

When I start mozilla or open any link in a new window I get the desired page to load but an additional new tab page opens up along with it. I've tried switching my homepage to different things (new tab, firefox home, show blank page) but I always get an additional new tab to open. How do I get only a single page to open?

Hello,
The Reset Firefox feature can fix many issues by restoring Firefox to its factory default state while saving your essential information. <br>
'''Note''': ''This will cause you to lose any Extensions and some Preferences.''
*Open websites will not be saved in Firefox versions lower than 25.
To Reset Firefox do the following:
'''For Firefox versions previous to 29.0:'''
#Go to Firefox > Help > Troubleshooting Information.
#Click the "Reset Firefox"[[Image:Button reset]] button.
#Firefox will close and reset. After Firefox is done, it will show a window with the information that is imported. Click Finish.
#Firefox will open with all factory defaults applied.
'''For Firefox 29.0 and above:'''
#Click the menu button [[Image:New Fx Menu]], click help [[Image:Help-29]] and select ''Troubleshooting Information''.
Now, a new tab containing your troubleshooting information should open.
#At the top right corner of the page, you should see a button that says "Reset Firefox"[[Image:Button reset]]. Click on it.
#Firefox will close and reset. After Firefox is done, it will show a window with the information that is imported. Click Finish.
#Firefox will open with all factory defaults applied.
Further information can be found in the [[Reset Firefox – easily fix most problems]] article.
Did this fix your problems? Please report back to us!
Thank you.

Can't ping or get printer web page or print via hostname

Ok, this has me stupped on my iMac running Mavericks. I just added my Kyocera printer as an IP printer but used the host name instead of an IP address, sounds simple so far.
Before doing this, I change the default host name in the Kyocera printer to "Kyocera" (without quotations). Add printer found the device and came up with the correct PPD for the model number and all was good at this point. I sent a printer test page which again worked fine.
I then opened Safari and entered the printers IP address to make sure I could bring up the configuration web page for the device and this indeed works fine, at this point I retype the address in the address bar as Kyocera.local and again the page refreshed and came up fine, Yippee!! so I added it to Safari's Favourites Bar, all good!
Since then, I can still get to the devices home config page via the IP address, but it will no longer find the page via the save Kyocera.local link in the favorites bar or retyping it in the address bar.
I have tried network utility and pinging the device, IP address ping works fine but Kyocera.local says unknown host. Tried the next obvious step and that was to see if printing fails now as well and indeed it too fails as it was still configured to print to the host name as it was when I successfully printed the inbuilt printer test page. I deleted the printer and added the IP printer via the IP address not the hostname and printer now prints fine.
Does anyone know why printing via the host name and bringing up the printers config web page both worked for the first time but fails from there on in????
DNS settings were set to Auto from ISP, I also tried google's 8.8.8.8 and 8.8.4.4 and even just adding the local bob router address in as an option but nothing works, but it did initially.
I install and repair printers for a living and have come across this when installing scan to FTP on a mac and rarely if ever can I get it to work scanning to FTP via the Mac's name for example, Jims-imac.local, just won't find it with or without the .local, but change it to the Mac's IP address and scan to FTP works great. Problem is that if the customer has their Mac getting IP address via DHCP, I have to advise the customer that if scan to FTP stops working, to check that the IP address on the Mac has not changed, and if it has, then change the scan to FTP settings on the scanner to the new IP address that the Mac has now been given from the DHCP server.
Not the best way to go about it. Why can't Mac's just find devices and devices find Mac's? Windows is so straight forward, what am I missing?
Any help would be appreciated.
Regards,
Damo

Hi,
First of all let me clarify your trial.
Where is your monitoring server?
Is it behind inside or outside interface (please share ip adress)?
From config it seems, it can be reach via outside interface. Then you have to make snmp check on outside interface, not on inside (cannot make a snmp/ping check on inside interface with request comming through outside inteface - it simply won't work).
From the first check of routing table, I would suggest:
delete : route outside MCCC_Outside 255.255.255.255 1.1.1.1 1 - doesn't make a sense route host address, when it's directly connected network (and more, route 1.1.1.2 to 1.1.1.1, when 1.1.1.1 is vlan2 interface)
change : route outside 172.31.0.0 255.255.0.0 192.168.1.1 1; route outside Domain 255.255.0.0 192.168.1.1 1 - you should consider route it to 1.1.1.2 (if this is your next hop address at WAN).
route outside VLAN10 255.255.255.0 MCCC_Outside 1 - why?
I would use default route to somewhere at 1.1.1.0/24 range - next hop (router).
HTH,
Pavel

How to get the subtotals to only print on page 1 of the report?

Hello :
Could someone tell me how to best accomplish this in CR 2008?. Thank you in advance!
On Page 1 of the report, I only want to print a summary of provider then the total of each procedure type performed at the clinic.
Here's a sample of the result that I'm looking for:
    Dr. One
     Office visit, new         = 15
     Office Visit, established = 10
     New wellness care         = 18
    Dr. Two
     Office visit, new         = 5
     Office Visit, established = 18
     New wellness care         = 20
    Dr. Three
     Office visit, new         = 15
     Office Visit, established = 10
     New wellness care         = 10
     Established wellness care = 30
**The 2nd part of this report I was able to get the desired result, but I thought it would be helpful to share this informationl.
The subsequent pages is grouped by provider, visit date, patient name, date of birth,
and procedure description. Then subtotal by provider.
Here's a sample result
    *Dr. One*
     12/1/2009 Patient 1 06/29/1977 Office visit,new
     12/1/2009 Patient 2 5/5/1960 office visit,new
     1/5/2010 Patient 3 8/18/59   Office Visit, established
     1/14/2010 Baby 1     11/1/2009 New wellness care
    +Total = 4+
    Dr. Two
     09/16/2009 Patient 4 7/19/80   Office visit, new
     10/20/2009 Patient 4 02/02/1986   Office visit, new
     10/23/2009 Patient 4 06/15/1994   Office visit, new
     11/11/2009 Patient 4 02/02/1972 Office visit, established
     1/12/2010 Baby Boy 1/1/2008    New wellness care
     1/12/2010 Baby Girl2 9/21/2009 New wellness care
     1/18/2010 Baby Girl3 8/1/2009 New wellness care
     1/19/2010 Baby Girl4 12/21/2009 New wellness care
    Total = 8

Copy the date parameters to the sub-report. In the sub-report criteria use the local parameters to select the date field data. In the sub-report linking link the main report parameter field(s) to the sub-report parameter fields (not the ?PM-?<parametername> default links).   You may need to also link the data in the sub-report by the Dr. field.
Good luck,
Eric

Text overflown is not getting printed in the next page in ADOBE

Hi Experts,
I have a text field, where the users can enter the comments. In this text field if the user enters more than a page, a scroll bar appears in the print preview where the users can view the complete text what they have entered, but while printing the text which exceeds more than a page is not getting printed in the next page.
I have set the subform properties as "Flowed" and the check box "Allow Page Break within content" is also been enabled, but still the extra contents is not getting printed in the next page.
Please help me regarding this.
Thanks & Regards,
Karthik MD

Hi Lohitha,
Even "Expand to fit" is been enabled.
Thanks & Regards,
Karthik MD

Text overflown in the first page is not getting printed in the next page

Hi Experts,
I have a text field, where the users can enter the comments. In this text field if the user enters more than a page, a scroll bar appears in the print preview where the users can view the complete text what they have entered, but while printing the text which exceeds more than a page is not getting printed in the next page.
I have set the subform properties as "Flowed" and the check box "Allow Page Break within content" is also been enabled, but still the extra contents is not getting printed in the next page.
Please help me regarding this.
Thanks & Regards,
Karthik MD

Hi,
This issue is in ADOBE, I think there is no concept of Window in ADOBE,
The text box is placed inside a Subform.

I only get a blank page when trying to print a web page

I have looked up how to print a web page and did exactly as shown on the screen (I did select my printer) but when I want to print a Web page I only get a blank page. I also cannot save as PDF in the Print Dialog Box because I get a blank page there too.
I have tried to disable all my add-ons and extensions and re-enabling them one by one and it did not change anything.
Although I did not specifically notice the exact date, I feel this has been happening since I have upgraded to Mac OS 10.6.4

Wow! After several different attempts to solve my printing problems , the one that worked was the suggestion that I hit "Reset Firefox" button on the Troubleshooting Information page. Once I did that and got back in I was able to print pages correctly. Thank you for all your help and patience.
-Eric

I am using Firefox 11 and I am unable to print web pages. I can print PDFs ok. I tried to open the prefs.js file to delete anything that starts with print and I get an error message.

I cannot print web pages. I've tried the solutions suggested like deleting anything that starts with print in the prefs.js file but I get an error message: Script: c:\users\rick\appdata\roading\mozilla\firefox\profiles\iviwh5c1.default\prefs.js
line: 1
Char: 1
Error: invalid character
code: 800A03F6
Source: Microsoft JScript compilation error

When editing '''prefs.js''' you need to use a simple text editor program. WinXP Notepad messes up the line formatting of prefs.js, so I use Wordpad - but you need to save the edited file in a Text-Only format (Wordpad asks about that when you go to save the edited file). I never used Win7, so I don't know if that version of Notepad messes with the line formatting of prefs.js or not.
Another thing - make sure '''''"Hide extensions for known file types"''''' is de-delected in Windows file / folder options > view -> advanced settings. Otherwise Windows may add a .txt file extension that you won't be able to see, and that will break that file in Firefox. '''prefs.js.txt''' won't be recognized by Firefox, when is expecting to find '''''prefs.js''''' .

I am trying to print a passport sized headshot and I get a full page photo. How to I print out a smaller size?

I am trying to print a passport sized headshot and I get a full page photo isntead. I downloaded the shot from i photo and chose "small" but it didn't help.
I also cropped the photo on iphoto to the dorrect size but no difference. I have a Canon MX 870 printer. Please advise.

In iPhoto select the photo and print - select the paper size and a custom print size (2x2 i believe for passports) and print
LN

When I try to print from web page I get "printer not activated - error code 30", but I can copy text into Word document & printer works.

I am unable to print anything from an internet web page. I continually get "printer not activated, error code- 30" followed by "An unknown error occurred while printing". I can copy the material from the web page, place into a Word document and then print. This just started yesterday and I have no idea why. Would appreciate your advice!

See this:
[http://kb.mozillazine.org/Problems_printing_web_pages#Prints_to_a_small_portion_of_the_page]

How do you get rid of white space when you are printing multiple pages to one sheet of paper?

How do you get rid of extra white space when you are printing multiple pages to one sheet of paper? When printing multiple pages to one sheet of paper Acrobat won't let you select the "zoom" for printing.
Thanks

Take a look at Quite Imposing.

Anytime I try to print in Firefox a Microsoft KB article that is 1 page, I always only get the first page.

Anytime I print any Microsoft KB article, I only get the first page worth of text. This is very troubling because the articles are typically long, and I only get 1 page. The second page always comes out blank (even though in IE it will print out multiple pages with all the text).
My specific example today is listed in the URL below. This example will only print to the "DIR" command, I don't get the full page printed out.
Anyone else have this problem? Anyone have a resolution? I hate having to hit up IE just to print a single article.
I updated to FF 8.01 just to make sure, and I have tried different printers and even computers, to no avail. Even the print preview has the issue, only the first page worth of text is printed and the second page is always blank (even if there are 3, 4, 5, etc pages of data to be printed).
I have also tried the Firefox Menu -> Print command, and the "on-page" print command. I have seen moderate success with highlighting all the text that I want to print and going to "Print-Selection" but it is ugly.
Any feedback or assistance is greatly appreciated.

'''Try the Firefox Safe Mode''' to see how it works there. The Safe Mode is a troubleshooting mode, which disables most add-ons.''
''(If you're not using it, switch to the Default theme.)''
* You can open the Firefox 4.0+ Safe Mode by holding the '''Shift''' key when you use the Firefox desktop or Start menu shortcut.
* Or use the Help menu item and click on the '''Restart with Add-ons Disabled...''' menu item while Firefox is running.
''Don't select anything right now, just use "'Start in Safe Mode"''
''To exit the Firefox Safe Mode, just close Firefox and wait a few seconds before using the Firefox shortcut (without the Shift key) to open it again.''
'''''If it is good in the Firefox Safe Mode''''', your problem is probably caused by an extension, and you need to figure out which one.
Please follow the [[Troubleshooting extensions and themes]] article for that.
''When you figure out what's causing your issues, please let us know. It might help other users who have the same problem.''

How can I print Double A4 with HP Officejet 6500? I only get the first page...

I try to print a large photo in "landscape" Double A4 with my HP Officejet 6500.
I can select "Double A4" to print but I only get the first page. So I only have half a photo.
What should I do?

chris
You can not attach a multi-page .pdf document to Pages.
Just create a folder in which you enclose both your Pages letter and the .pdf.
Peter

HT4356 I have the up photos smart 5514 printer and can't get it hooked up to print web pages. It says no air printers found and both a connected to the same wifi

I have the up photos smart 5514 printer and can't get it hooked up to print web pages. It says no air printers found and both a connected to the same wifi

Shannmo-
The HP PhotoSmart 5514 is on Apple's list of AirPrint printers, so it should work. <iOS: AirPrint 101>
One problem might be that your WiFi router does not correctly handle Bonjour data required by AirPrint. Contact the router's manufacturer to see if there is a change to its setup or a firmware update that will solve the problem.
I had a printing problem several months ago, where the WiFi had jumped to a neighbor's WiFi that happened to have the same name. There are a LOT of WiFi routers out there named "Linksys"!
Fred

My Lexmark X2670 printer doesn't work right since I reinstalled the Firefox 3,6 version. I keep getting the alignment page to print over and over. Is there a problem between the two? Do I need a new printer driver? What?Daisynew66

I had to change my hrowser to Firefox because Internet Explorer 9 doesn't work with my ancestry.com program. I can't uninstall Internet Explorer 9. I got Firefox 4 and it didn't work either. I started having problems with my printer working at all then. l was told to go to Firefox 3.x. I looked and there is no 3.x it is 3.5 or 3.6. I downloaded 3.6. Now I keep getting a alignment page and end up having to shut off my printer. I'm using way too much ink. I'm almost out with no hope of getting more ink until I get paid. I can't find anyplace that says to update a driver or that I need a plug-in or what might be I've done everything I know to do.wrong. It has new port cables. Do you have any idea what could be wrong? Do I need to uninstall the printer and reinstall it again? daisy

I just figured out the print quality issue for my wife with her new iMac and new printer.
She replaced both at once and she couldn't understand why her Artisan 730 was lower quality then her Epson R280 when they had the same specs.
Turns out the newer printer had the option to connect via wifi which we used during setup.
The driver options are completely different depending on how you connect.
Once I connected via USB the correct options were available and the print quality was better.
Looking at the R2400 it dies not have wifi, but while researching the problem for my wife someone esle was having an issue updating to the latest printer driver.
If you go into the print utility from the Printer and Scanner system preference and under the general tab you should have driver 5.5.
One user had to delete the old printer driver before Software Update loaded the newer printer driver.
https://discussions.apple.com/message/15947486#15947486
On my MacBook Pro (w Snow Leopard) I always had to reconnect my wifi at home when it woke up. I upgraded my router from an old Netgear to a newer N D-Link and stopped having to do that.
I would be surprised you would have that problem with an Airport Extreme, you might check to see if there is a firmware update for it.

To Get Print Desired Page No

Similar Messages

Maybe you are looking for