To make the most of wireless and eprinting, can I leave my printer on constantly?
Wasn't sure if leaving on would cause problems....appears to be a power down mode of some sort.
HP Photosmart Plus
Product No. CN216A
Model B210a
This question was solved.
View Solution.
Hi theleeb,
Leaving the printer on should be just fine. The power down is the unit's power-save, or sleep mode, which means that while the printer isn't being used, it will consume the absolute minimum amount of power until it receives a print job. Because of this, I actually recommend leaving it on constantly so that it's always ready to print.
If I have solved your issue, please feel free to provide kudos and make sure you mark this thread as solution provided!
Although I work for HP, my posts and replies are my own opinion and not those of HP.
Similar Messages
-
i just updated my software to maverick and my iTunes to the most recent version and i can no longer transfer songs from my iTunes to my iPod. The tracks stay gray with a stagnant circle beside them in the left column. Any ideas?
Try:
- Reset the iOS device. Nothing will be lost
Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Unsync/delete all music and resync
To delete all music go to Settings>General>Usage>Storage>Music>Tap edit in upper right and then tap the minus sign by All Music
- Reset all settings
Go to Settings > General > Reset and tap Reset All Settings.
All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
- Restore from backup. See:
iOS: Back up and restore your iOS device with iCloud or iTunes
- Restore to factory settings/new iOS device. -
Apex 3 + BI Publisher - how to make the most of it?
Hi there
For evaluation purposes, I have downloaded and installed the standalone version of BI Publisher 10.1.3.3.2 in my machine. I modified the Apex settings to use BIP instead of Apache FOP that I was using before.
All is working fine. When I click the Print link, I get the a PDF file.
But the problem is exactly this: all is working fine... as before! I cannot see any obvious advantage of using BIP instead of FOP. I cannot see any new property that I can set or anything like this.
So, what new features are available to me in this new scenario? How to make the most of BIP and Apex? Is it something that I need to do on the BIP side rather than in Apex side? I need to justify the cost of BIP... ;)
Any advice will be welcome...
Cheers,
LuisHi Luis,
Difficult question to answer in the forums, since it's very much a 'visual wow' factor seeing the BIP integration in action.
However, going into marketting-mode for a moment (please excuse me, I don't do it often!), APEX Evangelists are holding some advanced APEX Training in London in March in which Dimitri Gielis will be doing a masterclass session in APEX/BIP and FOP integration (amongst many other things).
Here's a direct link to the training for more information -
http://eurotraining.apex-evangelists.com
Like I say, it's a difficult question to answer in the forum, however just sitting and watching someone who knows their way around the products is usually enough to provide a pretty convincing argument to management on why that big BIP fee might be justified!
Hope this helps,
John.
http://jes.blogs.shellprompt.net
http://apex-evangelists.com -
What computer manufacturer makes the most "linux friendly" laptops?
Hi,
I'm about to get a new laptop to replace my Dell E1505 I used untill now. i'm very happy with it, but it got old and starts to fail. I want to get a new laptop that's simular to it but new and more up to date. I looked at some of the computers avaliable and was thinking, which manufacturer makes the most linux friendly computers? Should I stick with dell or maybe HP is the better choice? What's your experiance on the subject?From what I've seen, major manufacturers give little-to-no concern towards Linux support when designing a product. Should they have a string of products which work hassle-free, it is through coincidence alone.
To take Lenovo as an example, many of their notebooks in the past have included a wireless card they referred to as a "ThinkPad wireless adapter", which was renowned for functioning 'out of the box' with the ath5k driver. During the middle(?) of last year, and without indication, the "ThinkPad wireless adapters" changed, and now use an rtl8192se chipset. ndiswrapper has limited success (if any); a functional driver has only recently been created for this chipset; and support still missing from the kernel.
While my next laptop will probably be a Lenovo it will be for their build-quality and not their Linux support. When looking for a laptop, I recommend finding something which matches your specifications, design and price and then thoroughly checking compatibility of the components: it's the only way to be sure. -
How do you make the most of any "free" services/ca...
I wonder if we can get a consensus of views that could contribute to a sticky on how to get the best value for money from BTBBA (and the other BT services that this is based upon).
I'm constantly confused so please excuse my ignorance:
Calls:
We have three family members on different mobile numbers, all using the same account. We're on 600 minutes - and this usually does for all of us. I'm on the HTC s620; my wife is on an old vanilla Nokia (don't ask) and my daughter is getting our new HTC Hero ("free") upgrade.
We all try to make calls to other mobiles from our mobiles (to make the best use of the included minutes from the 600 minute monthly allowance).
We also have a BT Broadband Talk account on our land-line, so when at home we tend to make calls to other landlines from our landline in the "free" periods. I assume that BTBBT is cheaper than standard BT Option 1 for land-line calls out of the free period, but I really don't know for sure!
Even in the Broadband Talk free periods we make calls to other mobiles on our own mobiles as we assume that - even if we go over our 600-minute allowance, these inter-mobile calls will still be cheaper from a mobile than via BTBBT. Is that correct?
I often link my s620 to the wi-fi network at home for casual (slow) web browsing, and then find that - on the odd occasion that someone calls us on our Broadband Talk number, my mobile will ring as well! I can live with that!
As a previous BT Fusion user I was used to the idea that I could multiply my free minutes by calling on my mobile through the hub, but that's old hat now. I'm given to understand that the new benefit is that I can make calls via BT Openzone, but I don't know if these cost me or not? And what about BT Fon - if I can find a FON connection and make a call, does that cost, or not?
If we don't use our 600 minutes in any one month I assume that the surplus rolls over. All of them, or is there a roll-over cap? If I roll over 100 minutes after month 1, and then have 150 minutes unused at the end of month 2, how many minutes will be rolled over to month 3?
Texts:
We have a big family text allowance, although having added some text blocks I'm a bit confused about the total allowance as the bill is so complicated to read. It seems we have 400 free texts included in the 600 minute bundle. To that I've added one or two blocks of texts; there's a bill entry for BT Mobile: 200 texts, and also a bill entry for BT Mobile: 300 Texts as well as an entry for the 400 Free Texts. However I'm only being billed for a BT Mobile: 200 Texts Bundle. Not complaining! Of course this could be because I upgraded part way through a month from 200 to 300 extra - but I'm thoroughly confused!
Data:
We've been super cautious about data. I switched to my current s620 (unused by my wife who didn't like the form factor) when my s710 started to fall apart. When I tried to activate this phone its software needed to be completely updated (not surprising as it had sat unused in its box for 16 months). A very patient lady from BT remotely connected to my PC to assist in getting the correct software on to the s620. However, she omitted to tell me that the default state would mean that all my emails would be flooding on to the s620 and I'd incur a whopping data bill as we only have the bundled free 10MB of Data. BT Customer Service have since done two credits - spanning two bills - for over £60 + VAT for erroneous data charges resulting from my software upgrade. For that I am very thankful!!
Now that the HTC Hero is about to arrive I've decided to subscribe to the £5 Data charge for an extra 500MB per month. I s that correct - total allowance will now be 510MB?
From what I've heard it is not easy to monitor your own account's data use. Is there an App for the Hero? Can I check anywhere from the HTC s620?
What is the best strategy for getting free Data on the Hero? I'm assuming that the following is free - (a) connecting via WiFi on your own BT Home Hub (or someone else's BT Hub with their PIN/permission); (b) connecting via BT FON (c) using one's free monthly allowance on BT Openzone - how much data or time is this, and is it cost-effective to add to this data allowance, compared with overshooting on the BTBBA 500MB allowance?
Other tips:
As well as providing some responses and/or confirmation for the above, does anyone have some more tips for how to get the best value for money out of BT, with a mix of:
BT land line
BT Home Hub 2.0
BT Broadband Talk account
BT BBA To Go Mobile account
Voice
Text
Broadband (we're on Option 3)
Mobile Data via BT BBA To Go (Also, would a mobile dongle be a worthwhile/cost-eeffective back-up if you were about to go over the 500MB limit? Although I agree with everyone else who would like a larger allowance available than 500MB - especially on a 600 minute bundle being shard by two or three users)
BT Vision
I pay a lot to BT every month and I still don't regard myself as anywhere near expert enough in how to use/combine the services for the best value for our money.
HELP Please!!!Wow!
I'm not going to be of much use regarding answers but I sure am going to watching this post like a hawk for any replies. My package is a slightly diluted version of this and I do find the BBtalk and data limits hard to make the most of as well.
If nothing else this totally highlights how complicated BT have managed to make their packages.
A cynic would assume that they are trying to catch us out at every step and for us to either be overspending or not really getting the moneys worth. -
SSRS 2008 R2 is extremely slow. The query runs in less than a second in the dataset designer but if you try to view the report it takes over 10 minutes. I have read this is a bug in SSRS 2008 R2. We installed the most recent patches and
service packs. Nothing we've done so far has fixed it and I see that I'm not the only person with this problem. However I don't see any answers either.Hi Kim Sharp,
According to your description that when you view the report it is extremely slow in SSRS 2008 R2 but it is very fast when execute the query in dataset designer, right?
I have tested on my local environment and can‘t reproduce the issue. Obviously, it is the performance issue, rendering performance can be affected by a combination of factors that include hardware, number of concurrent users accessing reports, the amount
of data in a report, design of the report, and output format. If you have parameters in your report which contains many values in the list, the bad performance as you mentioned is an known issue on 2008 R2 and already have the hotfix:
http://support.microsoft.com/kb/2276203
Any issue after applying the update, I recommend you that submit a feedback at https://connect.microsoft.com/SQLServer/
If you don’t have, you can do some action to improve the performance when designing the report. Because how you create and update reports affects how fast the report renders.
Actually, the Report Server ExecutionLog2 view contains reports performance data. You could make use of below query to see where the report processing time is being spent:
After you determine whether the delay time is in data retrieval, report processing, or report rendering:
use ReportServer
SELECT TOP 10 ReportPath,parameters,
TimeDataRetrieval + TimeProcessing + TimeRendering as [total time],
TimeDataRetrieval, TimeProcessing, TimeRendering,
ByteCount, [RowCount],Source, AdditionalInfo
FROM ExecutionLog2
ORDER BY Timestart DESC
Use below methods to help troubleshoot issues according to the above query result :
Troubleshooting Reports: Report Performance
Besides this, you could also follow these articles for more information about this issue:
Report Server Catalog Best Practices
Performance, Snapshots, Caching (Reporting Services)
Similar thread for your reference:
SSRS slow
Any problem, please feel free to ask
Regards
Vicky Liu -
How do I make the most of contacts for iPhone?
Hi, I've had the iPhone 4 since Dec, 2009. So I know very well how to use it. I've been re-watching the iPhone adds, and I really like how well the contacts are organized on the ads, and I was wondering, how can I make my contacts list look good and organized for each contact? How do you do this? any advice will help, I really want to make the most of my iPhone.
What do you mean good and organized?
If you want to add more information to the contact card, you can tap on the contact card of the person you want to edit, then select the Edit button at the top left corner. This will provide you with all the different options that are available to you to add.
At the very bottom there is one that says "add field", tapping on that gives you a few more options like Job Title, Department, Instant Message, Birthday etc.
This article says iCloud, but it's the same process even if you don't have iCloud:
iCloud: Edit a contact
http://support.apple.com/kb/PH2660
Is this what you're looking for? -
CS4, what are the most pressing issues and are they solved ???!!!
I'll be visiting the Adobe booth at the IBC on the 15-th to have a sneak preview of CS4.
To properly report back what I have seen, I need a short list of the most pressing issues and what interests you most to see solved or added. Just to name a few of the topics:
1. 64 bit or 32 bit?
2. Support for 64 bit OS and which ones?
3. Matte problems solved? (BTW, what were the exact issues with mattes in CS3?)
4. Titler improvements?
5. What (new) video formats are supported natively?
6. What significant improvements are made in integration in the Suite?
I'm not looking for a repeat of the wishlist, just the most important issues to have a look at.
Looking forward to your suggestions.Here is the news as I got it from one of the technicians and beta testers at the IBC, who showed some interesting things on the current beta version.
1. The RTM version is not ready yet. It will definitely be this year, but it will not be out in September. Most likely is around November and not all promised features will be available in the 4.0 version, but will be supplied by downloadable patches.
2. Interlacing/de-interlacing has not been solved. It is still the archaic approach from the '70-s era.
3. Vista 64 is officially supported, XP 64 is not officially supported, but runs without problems. Several beta testers have not seen any problems with XP-64. All applications are still 32 bit applications, apart from PS Extended, which is 64 bit. Parts of the memory model are ported to 64 bit. The first steps to porting all applications to 64 bit have been taken, but do not expect full support before CS5.
4. The major improvement has been in the project structure. Every project now has its own information about drive, directory and file structure as part of the project. Files in the project can have different properties in terms of resolution, i or p, so effectively this makes for Edius like capabilities, allowing for different sources in a single project, XDCAM-EX, HDV, AVCHD, P2 sources can be mixed and edited on the same timeline. You can move i material to a p timeline and edit from there.
5. Adobe Media Encoder is now a separate application.
6. Dynamic Linking has been improved significantly and encompasses AE, PP, EN in all directions.
7. Batch processing has been added. You can now add timelines to a render cue and continue editing on the same timeline and there seems to be some intelligence behind it as well.
8. OMF has been vastly improved.
9. The garbage matte problems have been solved.
10. Ultra is still a stand-alone application.
11. Improvements have been made to Encore, whether that includes closing the DVD was not really known.
12. Edit in Audition has been restored.
13. AVCHD is supported, RED support will be added (possibly even for CS3). Note that even on a 4-core MAC the editing experience with AVCHD is tiresome and horrendously slow. You may succeed in editing that kind of material, but only with 8-cores. Otherwise it is like editing HDV on a P4 @ 2.8 GHz with a single disk. It can be done, but it is not a pleasure. The CPU requirements are enormous and IMO most will be heavily disappointed that they need to upgrade their PC before any serious editing can be done, despite all the warnings given.
14. The titler has not been improved, but the strange windows problems (resizing) have been solved.
15. Dependency on Red, MainConcept and others make the delivery dates unsure, but it will take some time and new patches are already being worked on.
16. Adobe at IBC has only beta versions.
17. One member here (I will not mention names) is probably the best beta tester Adobe has ever had and this person beats all other beta testers by a wide margin in finding bugs. Thanks for all your continued trouble, NN. You will know who I mean if you are the person in question. One of your colleague beta testers was in awe of you.
The stability and integration of the suite has been vastly improved and tons of bugs have been resolved, so from that point of view, upgrading to CS4 looks very worthwhile. Initially however, third parties have to resolve some issues with their software, like Sony with their Clip Browser, which contains a serious bug, causing PP to crash completely. These bugs need to be resolved shortly and hopefully will be addressed before the RTM version comes out. -
Bought a Macbook pro 2009 2.8 ghz used, how do I make the most? (it was not formatted)
bought a Macbook pro 2009 2.8 ghz used, how do I make the most? (it was not formatted)
The first thing to do with a second-hand computer is to erase the internal drive and install a clean copy of OS X. You—not the original owner—must do that. How you do it depends on the model, and on whether you already own another Mac. If you're not sure of the model, enter the serial number on this page. Then find the model on this page to see what OS version was originally installed.
It is not safe to use a computer with software installed by a previous owner.
1a. If you don't own another Mac
If the machine shipped with OS X 10.4 or 10.5, you need a boxed and shrink-wrapped retail Snow Leopard (OS X 10.6) installation disc from the Apple Store or a reputable reseller—not from eBay or anything of the kind. If the machine has less than 1 GB of memory, you'll need to add more in order to install 10.6. Preferably, install as much memory as it can take, according to the technical specifications.
If the machine shipped with OS X 10.6, you need the installation media that came with it: gray installation discs, or a USB flash drive for some MacBook Air models. For early MBA models, you may need a USB optical drive or Remote Disc. You should have received the media from the original owner, but if you didn't, order replacements from Apple. A retail disc, or the gray discs from another model, will not work.
To start up from an optical disc or a flash drive, insert it, then restart the computer and hold down the C key at the startup chime. Release the key when you see the gray Apple logo on the screen.
If the machine shipped with OS X 10.7 or later, you don't need media. It should start up in Internet Recovery mode when you hold down the key combination option-command-R at the startup chime. Release the keys when you see a spinning globe.
Some models shipped with OS X 10.6 and received a firmware update after 10.7 was released, enabling them to use Internet Recovery. If you have one of those models, you may not be able to reinstall 10.6 even from the original discs, and Internet Recovery may not work either without the original owner's Apple ID. In that case, contact Apple Support, or take the machine to an Apple Store or another authorized service provider to have the OS installed.
1b. If you do own another Mac
If you already own another Mac that was upgraded in the App Store to the version of OS X that you want to install, and if the new Mac is compatible with it, then you can install it. Use Recovery Disk Assistant to prepare a USB device, then start up the new Mac from it by holding down the C key at the startup chime. Alternatively, if you have a Time Machine backup of OS X 10.7.3 or later on an external hard drive (not a Time Capsule or other network device), you can start from that by holding down the option key and selecting it from the row of icons that appears. Note that if your other Mac was never upgraded in the App Store, you can't use this method.
2. Partition and install OS X
If you see a lock screen when trying to start up from installation media or in Recovery mode, then a firmware password was set by the previous owner, or the machine was remotely locked via iCloud. You'll either have to contact the owner or take the machine to an Apple Store or another service provider to be unlocked. You may be asked for proof of ownership.
Launch Disk Utility and select the icon of the internal drive—not any of the volume icons nested beneath it. In thePartition tab, select the default options: a GUID partition table with one data volume in Mac OS Extended (Journaled) format. This operation will permanently remove all existing data on the drive.
After partitioning, quit Disk Utility and run the OS X Installer. If you're installing a version of OS X acquired from the App Store, you will need the Apple ID and password that you used. When the installation is done, the system will automatically restart into the Setup Assistant, which will prompt you to transfer the data from another Mac, its backups, or from a Windows computer. If you have any data to transfer, this is usually the best time to do it.
Then run Software Update and install all available system updates from Apple. To upgrade to a major version of OS X newer than 10.6, get it from the Mac App Store. Note that you can't keep an upgraded version that was installed by the original owner. He or she can't legally transfer it to you, and without the Apple ID you won't be able to update it in Software Update or reinstall, if that becomes necessary. The same goes for any App Store products that the previous owner installed—you have to repurchase them.
3. Other issues
If the original owner "accepted" the bundled iLife applications (iPhoto, iMovie, and Garage Band) in the App Store so that he or she could update them, then they're irrevocably linked to that Apple ID and you won't be able to download them without buying them. Reportedly, Mac App Store Customer Service has sometimes issued redemption codes for these apps to second owners who asked.
If the previous owner didn't deauthorize the computer in the iTunes Store under his Apple ID, you wont be able to authorize it immediately under your ID. In that case, you'll either have to wait up to 90 days or contact iTunes Support.
When trying to create a new iCloud account, you might get a failure message: "Account limit reached." Apple imposes a lifetime limit of three iCloud account setups per device. Erasing the device does not reset the limit. You can still use an account that was created on another device, but you won't be able to create a new one. Contact iCloud Support for more information. -
Setting up printer, unable to connect to wireless and eprint
I'm setting printer up to a macbook The wireless and eprint are not connecting. Does it assingn an eprint address?
I'm not sure about the proxy server What should I do next. It says the printer has installed but I haven't taken out the
CD yetHello mberry.
It would help knowing which printer model you have and how it's connected to the computer.
Please, check out this document.
Getting Started with ePrint
Cheers!
Wixma.
I am an HP employee.
Say thanks by clicking the Kudos star in the post.
If my reply resolved your problem, please mark it as as Accepted Solution so that it can be found easier by other people. -
HT1444 Upgrading from 10.5.8 to 10.6 (or later) which later version makes the most sense?
For work-related remote-access using Citrix, I will need to upgrade from V10.5.8 to V10.6 (or a later version). Which new version would make the most sense?
Since it's a 10.5 era issued machine and rather dated, the best OS X version is 10.6.3 via the white retail disks, call Apple Sales by phone and order it for $29.
10.6 will run your presently installed 10.5 software as 10.7 or 10.8 will not. Also 10.7 or 10.8 will slow your machine down to a crawl, so it doesn't make much sense to go there.
Since your machine is getting long in the tooth, it's got not that much longer to go, I would be considering a newer 10.8 or 10.9 machine (next summer) and ease yourself into in.
So 10.6 now, 10.8 or 10.9 on a new machine later.
Don't upgrade to 10.8 and don't worry about it, over 50% of OS X users are on 10.6 currently, (30% on 10.7) and about 5% on 10.8 just released.
Things to consider before upgrading OS X
Back up only your personal info off the machine to a external storage drive (not TimeMachine!), disconnet it. Stick the 10.6.3 disk in and run the updater.
Most commonly used backup methods
If you need to wipe and install, (like if you have problems because your 10.5 is funkyed up)
How to erase and install Snow Leopard 10.6
Install your programs from fresh original sources and last hook up your storage drive and return files into same named accounts. -
I'm not techinal so please bear with me. I don't have the bar that allows me to type in a website. I did have a few minutes ago. When I make the page full screen and move my cursor to the top of the page, the bar drops down and I can use it. I've tried restarting my computer, didn't work. Help!
Well I figured it out, right click the arrow that makes the screen bigger and unclick the Hide Toolbar. I knew it couldn't be that hard.
-
My Ihone 4s is not being recognized by Itunes.There seems to be no connection, the cable i am using is not the problem because itunes will recognize my Ipad2 and Ipod thru it. I have the most current itunes and phone software I need help!
Thank you allan this worked, the final thing was updating the driver softwar for the AMDS in device manager. Thanks again.
-
My husband uses adobe cs5. The clone tool isn't working and after resetting the tools adobe bridge now goes to picasa. How can we make the clone tool work and have bridge go to cs5 not picasa?
A lot more information about your hardware and software is needed.
BOILERPLATE TEXT:
If you give complete and detailed information about your setup and the issue at hand,
such as your platform (Mac or Win),
exact versions of your OS, of Photoshop (not just "CC", but something like CC2014.v.2.2) and of Bridge,
your settings in Photoshop > Preference > Performance
the type of file you were working on,
machine specs, such as total installed RAM, scratch file HDs, total available HD space, video card specs, including total VRAM installed,
what troubleshooting steps you have taken so far,
what error message(s) you receive,
if having issues opening raw files also the exact camera make and model that generated them,
if you're having printing issues, indicate the exact make and model of your printer, paper size, image dimensions in pixels (so many pixels wide by so many pixels high). if going through a RIP, specify that too.
a screen shot of your settings or of the image could be very helpful too,
etc.,
someone may be able to help you (not necessarily this poster, who is not a Windows user).
Please read this FAQ for advice on how to ask your questions correctly for quicker and better answers:
http://forums.adobe.com/thread/419981?tstart=0
Thanks! -
Ive recently updated my mac to OS X 10.10 and now my CS5 illustrator and photoshop will not open... I uploaded the most recent Java and they still won't open. Please help
Mac,
Nothing shows up here?
https://www.adobe.com/account/my-products-services.html#
With CS5 you must have registered, hopefully under your present Adobe ID.
I am afraid the chat and phone support are off until the beginning of January.
Serial number and activation support (non-CC, chat open between 5AM and 7PM PST/PDT on workdays)
http://helpx.adobe.com/x-productkb/global/service1.html
Adobe ID and registration support (non-CC, chat open between 5AM and 7PM PST/PDT on workdays)
http://helpx.adobe.com/x-productkb/global/service-c1.html
http://helpx.adobe.com/adobe-connect/adobe-connect-phone-numbers.html
Maybe you are looking for
-
I am in the process of restoring a new iPhone. Do far, it's been restoring for 2 weeks. How do I determine if it's working correctly and if not, how do I finish it?
-
Hello, Pls I need help? 1. my brother has given me his mac book but it has failed to recognise my details. His apple ID keepds popping up and it would not recognise mine. 2. i want to make mine so that i can sync my iphone and ipad with it. How do I
-
Separate audio sources for HDMI and optical?
Hi there, I'm setting up an Apple TV 2nd gen for my parents. I want to set it up in the following way: How do I set it up so that when they're watching Netflix (or whatever), audio comes through HDMI, but when they're using airplay wirelessly with th
-
Hello Everyone I have Pavilion dv6 3016ax. I have recovery CDs but i couldnt recover my window. when I tried to press F11 while its starting, notebook ask for window disc. I inserted that recovery CD. But it dont accept.. Still its asking for window
-
LR5 version 5.3 abends when selecting media type in the print module; on Mac OSX 10.9.1. Why?
LR5 version 5.3 abends when selecting media type in the print module; on Mac OSX 10.9.1. Why? The printer is an Epson 4900.