To print labels with barcodes in sap-scripts

how to print labels with barcodes in sap-scripts . explain with example.

Hi,
What was wrong with the answers you were given the first time you asked this question?
labels with barcodes in smart forms
Why have you ignored their efforts and logged the same question again?
Nick

Similar Messages

UCC 128 labels with barcodes - from SAP directly onto Zebra

Hi - I am trying to find a solution that would help our business print ucc 128 labels with barcodes directly from SAP onto Zebra printers. Till now, I had our basis team configure the printer and I ran a sample print program using SAPScript. The sample text data that the program had did print onto the label. What I am not sure about is the barcodes.
How to print a complete 4 (Width) X 6 (Height) label on a Zebra printer with barcodes.
Thanks
Nikhil

Hi Nikhil,
Could you please let us know the solution you have found. It would be helpful... Are there any best practices for using UCC 128 labels?
Regards,
Robert
null

Label printing issue with chinese characters (SAP script)

Hi ,
I have a requirement to print chinese characters on label print out.
Here are the steps already tried:
1) Created a new device type which is copy if ASCIIPRI and character set 8400
2) Font ANDALE_S, CNHEI, CNSONG are assigned to device type, same fonts called in SAP script.
3) During the print, it is picking ANDALE_S font(observed in spool RAW data), but preview is good.
4) I put ZPL codes CW1,B:MSUNG.FNTFS in beginning of script and also ^A@N,50,50,B:MSUNG.FNT while prining actual chinese text in SAP script.
5) also tried other device types assigned to printer LZEBU2, LB_ZEB2 etc.,
6) already checked at printer DIMM level, SIMSUN, ANDALE_S fonts are already installed
7) Character set on printer is same as in SAP
So far no option worked, it default to Courier fonts while printing and it results garbage characters.
If anyone has ideas, please advice.
thank you,
Anil

Hi,,
If the ZPL commands are correct for switching to the printer's internal CHinese font and character set, it may work to add the fonts via SE73 -> Printer Fonts -> ASCIIPRI . In here you need to add the commands in the print control SFxxx for your created font.
Another possibility is to print via windows and device type CNSAPWIN. Here it should not be necessary to add any font.
Regards,
Aidan

How to print Vertical barcode in SAP script

I want to print barcode related items in SAP script . can you plz tell me any one
1.How to print vertical barcode in SAP script ?
2.How to print vertical text in SAP script ?

1.
Create the character format in se71, in that select standard barcode. like
Char.format: C1 Description: Barcode
Barcode: BC_CD39 save the character format.
you can select from the list.
in the form coding, can you use barcode like
<C1> program variablr <>.
<C1> &itab-matnr <>. "--->like this
Then it shows the barcode in output.
check this.
2. for vertical text ..
if this is a window text then its possible but
like
S
H
I
P
T
O
This is possible in giving the window name but in the layout i never tried this.
If u can tell the scenario(with data reference) then may be i can try but not sure that this will give me hit.
regards,
vijay.

Printing QR-Code barcodes in SAP smartforms

Hi,
Is it possible to print QR-Code barcodes in SAP smartforms using system barcode font? Can anybody please let me know the font settings for QR-Code in SE73 font maintenance?
A sample QR-Code lablel can be found [here|http://images.orkut.com/orkut/albums2/ATUAAADhaahG5MxsqQ66lcSO9oHRWD3X8zh7yv1kEakKwMtVHchChN1WfZlM__2D0_o8H7AS4_UaTTCymQQtvXHb9-q3AJtU9VCWnzkZ4gC1sVnCekVuQ90qmhzeMw.jpg].
Regards,
Milan

Hi Milan,
I'll blog in SDN about my research that I presented at TechEd during session CD119 (blog) but I'll begin sharing with you some ideas.
Basically, without relay on any printer specific driver I would propose to follow the following steps:
1.Generate the QR Code image file (.PNG) with one of the methods presented in the following pages
2.Upload the image into the SAP system
2.1 Convert the generated file (file.png) to TIFF using SAP IGS class CL_IGS_IMAGE_CONVERTER (see GRAPHICS_IGS_IMGCONV_DEMO)
2.2.Upload. Use report RSTXLDMC to upload the image into SE78
3.Include the image into the Form:
3.1.SAPScript/:INCLUDE ZHEX-MARCO-name OBJECT TEXT ID ST
If everything is clear, the missing point should now be the first one. To generate the PNG from ABAP I found some options if you like, the better I think is presented in my open source project called abap2qrcode published here http://code.google.com/p/abap2qrcode/.
I know it's not trivial and I'm curious to know what do you think about it.
Sergio

How to add barcode to SAP Scripts

Hi,
Please let me know the procedure to add barcodes to SAP Script.
Thanks in Advance
Irfan Hussain

Hi,
You have to define a Character Format to print the barcode and in this one of the option is 'Barcode'.
Please also check these.
http://help.sap.com/saphelp_erp2004/helpdata/en/d9/4a917851ea11d189570000e829fbbd/frameset.htm
Barcode in sapscript
Cheers
Vinod
Message was edited by: Vinod C

How to print " Duplicate " in FORM ( either Sap Script or Smart Forms )

hi,
How to print " Duplicate " in FORM ( either Sap Script or Smart Forms ) if trying to take second Print Out and the FORM is already Printed.
Please let me know the condition that we should go for.If possible let me know the SAMPLE code since this will be used in most of the FORMS.
Regards
Avi

Hi
It depends on which print you're working.
If it's a print of standard document you can check the NAST (VSTAT field) table in order to know if the document was printed.
If a message is created you can find the hit in NAST table:
VSTAT = 0, document not printed;
VSTAT = 1, documment printed
VSTAT = 2, print is failed
If you mean a custom print I believe you need to create a log like NAST table.
Max

Adobe Reader 9 and printing labels with USPS.

I have read some of the other posts about Adobe Reader 9 and printing labels with USPS. I am running Snow Leopard on my IMac with Adobe reader 9.1.3 and have had no problems only when using Mozilla Firefox 3.5.3 for the Mac. There is, however, an extra step, if I recall (some window asking me to make a selection, which came up after I clicked on the "print and bill" button). But everything worked just fine.

Hi,
Thank you for the quick response. I've done that but the problem persists.
A bit about my computer it's Vista, but the folders are a little weird. Default install directory and common files folders are on a different drive. In addition appdata are also on a different drive. However this should not affect sinve I've already re-installed Adobe Reader multiple times and it used to work just fine.
But perhaps the problem is indeed path related. Anybody with more ideas to share?
Thank you in advance.
Update: When I reinstall Adobe Reader and open the file, the first time I try to install Japanese font it does not end with "registering product" but with something like "removing backup files" (see attachment). If I try to install Japanese font again and again, I will get the "registering product" at the final glimpse of the installation pop-up.

Printing address in chinese char- sap script

Hi
I have a requirement to print address in chinese(ZH language).
currently we need to write down the Chinese address manually on envelop if mailing address is in China.
we would like to have the logic for the output. if there is Chinese name/address maintained in customer master, then use Chinese name/address. otherwise, use original English name/address to print on statement.
in sap script they are passing address number to get this address
/:   ADDRESS PARAGRAPH AF PRIORITY P LINES 10
/:     ADDRESSNUMBER &DKADR-ADRNR&
/:     FROMCOUNTRY &T001-LAND1&
/:   ENDADDRESS
Anyone help me out
Regards
Kumar

Hi,
you can use this with this format
/: ADDRESS [DELIVERY] [TYPE t] [PARAGRAPH a] [PRIORITY p] [LINES l]
/: TITLE title
/: NAME name1[,name2[,name3[,name4]]]
/: PERSON name of natural person [TITLE form of address]
/: PERSONNUMBER number of the personen
/: DEPARTMENT department
/: STREET street name HOUSE house number
/: LOCATION additional location information
/: POBOX po box [CODE post code / zip code] [CITY city]
/: POSTCODE post code / zip_code
/: CITY city1[,city2]
/: NO_UPPERCASE_FOR_CITY
/: REGION county / state
/: COUNTRY recipient country [LANGUAGE language code]
/: COUNTRY_IN_REC_LANG
/: LANG_FOR_COUNTRY language key
/: FROMCOUNTRY sender country
/: ADDRESSNUMBER address number
/: ENDADDRESS
In detail
COUNTRY_IN_REC_LANG
This flag tells the system to use the recipient language for the country name.
( COUNTRY_IN_REC_LANG u2018Xu2018 )
( Default: Recipient language is not used: COUNTRY_IN_REC_LANG u2018 u2018 )
LANG_FOR_COUNTRY
Default = Space
Use this parameter to explicitly set the language in which to print the country name of a foreign address. By default, the system uses the language of the sending country.
LANGUAGE
Language code of the language of the recipient country, if it differs from that of the recipient COUNTRY. Example: addresses in Switzerland. Standard SAP language codes are used; you can display these in the initial SAPscript text processing screen or in table T002.
FROMCOUNTRY
Specifies the language to be used for formatting the name of the recipient country. For most European countries, the recipient country is specified by placing the international car registration letters in front of the post code and separating them from the post code with a hyphen. You must always specify the sender country.

BOX command does not print vertical/horizontal lines in SAP Script

Dear all,
in sap script we are using the BOX command to draw some boxes. DUring the print preview, all the boxes look
just fine including horizontal and vertial lines. But, when we print the output, I get the output minus
the vertical lines and some horizontal lines.
Regards,
rukku
Edited by: Rukmangada Reddy Ramala on Mar 23, 2010 2:23 PM

Hi rukku,
Which device type are you using?
Please have a look at SAP notes:
77976, 19807 and 183948.
Regards,
David

Smart form printing issue with LOCL and SAP printer

Hi,
The issues are as follows:
1. the top portion of the Invoice and PO does not print when using the SAP printer (works when using LOCL)
2. the shaded areas of the Order Confirmation and Invoice are black when printing to a SAP printer (works when using LOCL)
In an attempt to correct the printing issue is was suggested that we change the SAP printer device type from HPLJ4 to POST2. This did address the problem where the shaded areas were black but then we received reports that other reports printed "garbage". Its possible that using POST2 device type causes issues when printing to HP compatible printers.
Apparently all the testing was done using the SAP printer LOCL and not the SAP printer name and SAP spool system. LOCL uses the SAP GUI and Windows system to produce the output. Our production users at the plant site and Toledo are using SAP defined printers with the device type of HPLJ4. HPLJ4 is our standard here as OC for our printer definitions and we have HP compatible printers installed in our Toledo location and all of our remote sites. We need to be able to correctly print the Invoices, Purchase Orders, Sales Order Confirmations on our SAP printers.
What can be done to the reports to allow them to print on our HPLJ4?
Thanks, Prathap

Hi Prathap,
Check the background shading of the windows of the Smartform where you get the black boxes. If it is set something like this:
   Color: White
   Saturation: 100%
this can be the problem.
I know it is strange but some black and white printers cannot handle this setting. They only know one color black so the ignore the color setting and just take the saturation 100% setting.
The reason it works with local and device type SAPWIN is that the print data is created in Windows and sent to the printer as graphic.
Please change the shading for window MAIN -> tab 'Output Options' to:
   Color: Black
   Saturation: 0%
and this should resolve the problem.
Then create a new spool and check if the problem is resolved. See SAP Note #400050.
Regards,
Aidan

Missing field when printing labels with Address Book

I am would like to print the labels for my clients Christmas Cards, using AddressBook. When doing print > label, I get all their names and addresses on the labal formt that I want but the company name is missing. How do I get AddressBook to include the field "company" into the label ?
Thanks for help.

If you need to include the company's and individual's name, here's a work-around:
1) for each such card, you put the individual's name and leave the Company field empty.
2) Put the company name in the field for "Street"
3) Put the street address, including Apt. # in the field for "City"
4) Now, put the City, State, and Postal Code all in one field: the field for "Country".
5) save the card.
When printing labels, proceed as follows:
1) Print>File>choose your Avery label under "Layout" and then click "Label."
2) Here, you make sure to check the box so it will "Print country." Don't forget this step, or the whole plan is a failure.
This works, but it only works if the card is in-putted as described above. It won't work if your cards are already set-up with the "company" field and the "name" field.

How to fetch Print program name of a SAP script?

Hi abapers,
Could you please tell me how to fetch the name of a script's print program with the help of the script's name?
I have tried with table TNAPR and T-code NACE,it didnt help.
Is there any function module that returns the print program's name.
Please reply.
Thanks,
Suchi.

hi ,
GOTO SE71 Txn
Enter standard script name.
Click on Display.
"in menu bar
"form------>Check--->text ----->press enter
Now you can view the standard print program name
Thanks & Regards

When i am printing labels with color, the letters all come out with a gray shadow

when i print labels in color, all ofthe letters come out with a gray shadow (or ghosting) around them...how can this be corrected? i contacted HP support and they were of no help.

Hi there @kthlvac , welcome to the HP forums!
The printer may be having print quality issues as per your description. Please reply to me with which printer model you have and I will look for a troubleshooting guide for you.
Also tell me what troubleshooting you have already tried when you called HP's technical support.
How Do I Find My Model Number?
Thank you!
R a i n b o w 7000I work on behalf of HP
Click the “Kudos Thumbs Up" at the bottom of this post to say
“Thanks” for helping!
Click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution!

Printing labels with no address

this is driving me mad.
anyone any idea how to print a load of address labels for people who don't have addresses?
ie people who i will actually see and can actually give them their christmas cards.
i thought i was being organised by creating a little christmas card group in address book. but it only wants to print out the ones of people whose addresses i know. this is very annoying. why can't i do it?
i suppose i could just write xxxx in the address field and then i guess it would print. but do people want to be given a card that says, "sally smith, xxxx" ???!!!?
maybe i'll just put "happy christmas" in the address field. will that work?
ok, maybe i've solved my own problem here. but there must be a better way of doing it ...
any ideas.
thanks.

I've found no way to do this from address book. Printing labels from address book is just simple list style printing ** fill the sheet with names and print. I see no way to insert blank information like I use to do in Clairworks in order to skip rows and columns. If you need to repeat names or print only certain columns and rows, then you would need to do that from another program. I have no recomendations since I haven't used any, but I'm sure there are many out there and probably a lot that are free to download.
What I do is print out full sheets of mailing labels on the ones I used repeatedly, such as my return address, electric bill, water bill, etc. I used appleworks in the past, but now it no longer works under Lion, so I will have to make new sheets, probably from Word.
For all others addresses that are not used frequently, I've resorted to just running my envelopes throught the printer.

To print labels with barcodes in sap-scripts

Similar Messages

Maybe you are looking for