To print two ' continuously

Hi,
I want to pass (' ' abcdef';3;5' )as an argument some function but when i am passing like this i am getting error
quoted string not properly terminated.
Can any one help me out.
Regards,
Guru.

I feel i must explain my problem a bit clearly
I am using a utplsql(a freeware for unit testing) for my work .Here i must pass arguments using the following command
a_grid(0).arglist := '7;2001-01-01';
here suppose instead of 7 if i need to pass a string
ie something like:
a_grid(0).arglist := ''abcde';2001-01-01';
what should i do,plz dont ignore the quotes at the begining and end of arguments
( ' 'abcde';2001-01-01';)

Similar Messages

Problem printing on dot-matrix printer with continuous paper

Post Author: kdebruyckere
CA Forum: .NET
Hi,
We're currently developping an .net application for a customer of ours in VS2005 (c#). I used crystal reports for VS2005 to create an invoice.
The invoices have to be printed on a dot-matrix printer with continuous paper (Brother M-4318). When an invoice is only one page long, there's no problem. Even when printing several sigle-page invoices after another, all goes fine. The problem occurs when an invoice is more then one page longe. The first page comes out correctly, but on the following pages everything moves ca. 3 mm upwards (3 mm on the second page, 6 mm on the third page, and so on...). On the report 'Design > Printer Setup', I selected the right printer, the right paper size, ... On the report there's a page header (consisting of two sections), and there's a page footer that is only printed on the last page, but there are no report header and no report footer.
I can not figure out what seems to be the problem. Has anyone else had this or a similar problem before? If so, please let me know. Any suggestions are welcome.
thx

Post Author: ole
CA Forum: .NET
Continuous paper is a little bit longer than normal A4 paper. I found only one way to set it: ReportDocument.PrintOptions.PaperSize =CrystalDecisions.Shared.PaperSize.PaperFanfoldStdGermanI had no success, setting continuous papersize by printer setup. ... waiting for CustomPaperSize-Property (like CustomPaperSource)... Olaf

Printing two lines of text in Print Module

Is it possible to print two, or more lines of text, say on a contact sheet, such as filename and caption. If so, how?

Lightroom automatically wraps text under the thumbnail in contact sheets. The Text Template Editor does not allow you to enter line breaks. So, if your Filename is long enough to fill the first line, the caption will start with the second. If not, you can tweak the template somehow so that it looks the way you want.

OfficeJet 4500 will not print two sided over network

I'm running on Windows 7 with an OfficeJet 4500 G510n-z over WiFi. Printer works great except that it will not print two sided. We've used a non-WiFi 4500 to print two sided before. With the new printer the first pages print and the pop-up shows on the laptop (prompt to flip paper over) but nothing happens. The second pages never print.
I've run all of the HP print and network diagnostics. Everything appears to be OK.

The solution below was found on the sticky post at the top of this board "Fixes and Workarounds from HP"
I think the patch below only applies if you have the original printer software installed, I assume this issue was fixed in later versions of the printer software, Read the patch information carefully.
http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=mp-69847-2&lc=en&dlc=en&cc=us&...
This Print Driver Update contains improvements for issues related to the following applications and/or print functionality:
     Microsoft Office 2007
     Duplex printing via network
     Printing from Intuit applications
     Print margin accuracy
     Thai language font

How to print two sides with one page?

I have a PDF that is one page long and I'd like to print the same thing twice (front and back) on one page. Can I do that?
I've tried printing two copies with the printer set to double-sided, but it just printed two sheets with one side on each sheet.

Well sure; Go back to the authoring application that created the documents and do a 2-UP page. Make the existingg page large enough to accomodate the extra content. Is that what you're asking or do you really mean print to a printer with a back up ? In that case just flip the page over and print page 2 on the other side.
Or are we missing something ?

How do I print two DIFFERENT A5 pages onto one A4 piece of paper in Preview?

Hi, I know that within the Preview printing set up you can print two copies of one document on an A4 page.
However, I want to print one copy each instead. I want to put about 8 photographs and documents onto 4 A4 pages all in A5 size to save on paper.
Any help with this would be much appreciated as I know in Windows folders this is really easy to do but it seems impossible on the Mac.
Thank you.

In Print dialog box, you should be able to choose Layout and set pages per sheet to 2 (or 4 ...).
Then the print stream (from whatever source) will pour into the "mini-pages" and fill them up in order.
To do this using Preview, select all the documents you want in order, then open them "all-at-once" with Preview, and they will be temporarily collected into a larger "super-document" for viewing and printing together.
If you are printing photos from iPhoto, it has its own even better controls.

How to print two voucher in one page?

HI,
we want to print two voucher in one paper. what are the steps to be taken in sapscript? is it purely relted to SPAD?
Regards,
lijo Joseph

hi joseph,
i'm not sure how related this would be to your concern, but in my place, we've implemented that by sizing a voucher as half a page, so that when we print vouchers, the printer would know that one page is half of a regular page. SPAD is one place to fix, but the actual printing program and SAPScript was also customized so that it would send two vouchers for printing consecutively, and would fit in one page.
ryan.

HP Laserjet CP1025nw Color Printer - printer prints two copies when only one is requested.

pcwizard (HP) requested that I try Foxit Reader 5.1 to see if the printer will print properly. I used the same previous document and printed it with Foxit Reader 5.1. The printer printed two copies when only one was requested as it had done in the past. We still have a problem.
I am using Windows 7 (64 bit) for OS. I have experience the issue on two different computers.
dslledyrt
This question was solved.
View Solution.

Hi dslledyrt,
Can you install the Basic Driver for the printer on one of the computers, and let me know if you still have this issue?
http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=lj-90357-1&cc=us&dlc=en&lc=en&...=
I am an HP employee.
Say Thanks by clicking the Kudos Star in the post that helped you.
Please mark the post that solves your problem as "Accepted Solution"

HP Laserjet P3015 double sided - the last odd page prints on the same page when printing two copies

HP Laserjet P3015 double sided printing is set up on Windows 7. When printing two copies of a document, if it has odd number of pages, the last page is printed on both sides of the page. There is no page feed for the last page.
Suppose say there are 3 pages in a document and you want to print two copies. It prints like 1/2, 1/2 and 3/3. The third page (odd number) print on the same page. The last page page does not print on two pages.
It works alright on Windows XP.

Hope that you have configured the correct paper type and size in the printer hardware and also selecting the same paper tray, size, type from the printer driver while printing.
It may be caused due to the job formatting done by the application software or some jobs settings done from the job/application or printer driver. Check by toggling the 'collate' option and also try to print from a different application software.
Please mark the post that solves your problem as Accepted Solution
Click the 'Kudos Thumbs Up' if this was helpful. Thank You!
(Although I am an HP employee, I am speaking for myself and not for HP)

How do you get Workforce 840 to print two-sided

I can't figure out how to get my new Epson Workforce 840 to print two-sided (iMac running Mac OS 10.7.2). From MS Word the two-sided option (in Layout) is grayed out. In Mail and other Apple applications the Preset for two-sided printing is off and I can't figure out how to turn it on. The two-sided print function works as expected when I print from Windows 7 software (Bootcamp) or if I use the LCD controls on the printer to have copies printed two-sided. Probably something obvious, but I'm a newbie to the Mac world, would appreciate some help. Thanks.

I am not sure if it is still valid for OS X 10.7, but check the User Guide. Go to Output Settings
Then make your choces:
All instructions and images are from the online Users Guide on the Epson US website.
Message was edited by: Matt Broughton

How to print two-sided automatically in Adobe Reader 10.1.2?

Hello, when I want to print two-sided with my printer I select this option:
And my printer does it automatically, I do not have to reload the paper.
However, in the new version of Adobe Reader, after selecting that option this one is automatically checked:
And I have to reload the paper manually:
Can the problem be solved? This did not happen in previous versions.
The printer is an HP P1606dn and I am using Adobe Reader 10.1.2. Sorry about the screen captures in spanish.
Regards

Hi, Shatik
Thanks for replying.
The DFS shares are mapped as a network drive. This is done just once using a batch file that uses the persistent switch. No roaming profiles, no username\application data path.
Since posting this I can now access PDF's, but many of our staff are now unable to scroll through an entire pdf without Adobe Reader hanging. Again, removing the checkmark in the protected mode option allows full scrolling of a pdf.
Disabling/enabling antivirus real-time scanning makes no difference.

Officejet 7310xi does not print two-sided automatically after installing Windows 8.1

When I first purchased my Officejet 7310xi and installed it on my Windows XP desktop PC it worked fine printing two-sided documents automatically. I recently purchased a new desktop PC with Windows 8 and upgraded it to Windows 8.1 and downloaded and installed the Officejet software drivers from the HP download site. But now the printer will not print two-sided documents AUTOMATICALLY -- when this option is selected, I get a pop-up screen telling me to remove the documents from the out tray, turn them around, and reinsert them in the feed bin, i.e., it acts as if I requested two-sided MANUAL printing.
This question was solved.
View Solution.

Hi,
Make sure the Automatic Duplexing option is enabled:
Enter Control Panel > Devices and Printers.
Right click the printer icon, then click Printer Properties.
Click the Device Settings tab.
Set the Automatic Two-Sided Duplex Accessory as installed and click OK to save the change.
Now Automatic Duplexing should become available.
Regards,
Shlomi
Say thanks by clicking the Kudos thumb up in the post.
If my post resolve your problem please mark it as an Accepted Solution

I had ordered a photo book print two years back. I want to reorder the same book again now. However, I have lost the album project in iphoto. Is there any way to see my print order history and reorder the same book for print ?

I had ordered a photo book print two years back. I want to reorder the same book again now. However, I have lost the album project/photos from iphoto.
Is there any way to see my print order history and reorder the same book for print ?

No. Apple only keeps the pdf file for a book for 30 days. Without the library and book project you won't be able to reorder the same book.
Even though the horse is out of the barn the following tutorial might be of help for future books, i.e. create a new library for each book): iP08 - Archiving an iPhoto Book for Editing and/or Ordering at a Later Date
OT

Mac printing two pages on the same sheet of paper double-sided

I have a large PDF file that I'm trying to save paper by printing two pages of the file on the same sheet of paper and then printing double-sided, e.g. pages 1-2 would be on the front and 3-4 on the back. I can accomplish the first part by changing the page layout, but then can't figure out how (or if) I can duplex print. Can anyone help? I'm using Adobe Reader 8.1.2 on a Mac running OS 10.4.11.

Yes I do. Normally, I just have the printer print even pages on one side and odd on the other side. But, putting two pages on the same side fouls up that process. If I try printing odd pages, I get 1 and 3 on the front and 5 and 7 on the back, instead of what I want. Maybe I'm wanting to do something that can't be done. After I changed to the two-page layout, I thought maybe I could do a Save As PDF in the Print dialog box, but that was not allowed by Reader.

Why can I not print two sided

I just downloaded Acrobat reader Dc for windows and cannot print two sided.

Hi Michael,
I can understand your concern & will guide you in the right direction.
To print both sides your printer should support duplex printing, please refer to this KB doc. Print double-sided | Acrobat, Reader
In case if you still experience any issue please let us know, we will be happy to help you.
Regards,
Aadesh

To print two ' continuously

Similar Messages

Maybe you are looking for