To Pro-Rate or not to Pro-Rate
Apple has given me two options for my replacement MBP.
Since I still have 2/3rds left of my Apple Care Warranty, they would pro-rate and refund it. Then I would buy a new one at regular price (but at a sort of discount considering the other was refunded.)
They also will simply transfer the old one over as if i never got a new computer.
The problem is apple said they can't tell me how much money I'd get back from the old plan until I actually cancel (includes $25 cancelation fee)
I think the extra year might be nice (get me through 4 years of school then) but at the same time I don't want to do t if its to pricy.
What do you guys think?
Isn't applecare a set price thing only available from Apple stores/apple stores online?
Nope. While you can't obviously haggle with the online Store, physical stores and Apple Store phone agents can play to a certain degree with pricing when it comes to price matching. Asking for a discount on its own will get you a big fat no.
Anyone who can sell a Mac can sell AppleCare so it does pay to shop around. While margins on AppleCare for retailers aren't anywhere near as good as they once were (around 50%) there's still room to move.
Similar Messages
-
Exchange rate EURX not calculate exchange rates between USD and GBP
We have set ExRt as following:
Exrt Usage Ref. crcy
EURX EMU EUR
we have "EMU" flag checked also.
We are maintaining exchange rates (EURX) for EUR with all others currencies.
We expected that, if we have a CoCode set in GBP and we post a document in USD, SAP will calculate GBP <->USD from exchange rates EURX(USD/EUR) and EURX(GBP/EUR). It seems to be incorrect because the system is ignoring EURX exchange rates and using "M" GBP-USD exchange rate and this was not expected by us.
Could you please tell me if it is correct to expect SAP calculates USD-GBP Exchange rates from EURX(USD/GBP) Exrate or I am wrong and I need to maintain "M" exchange rates for USD-GBP.
Thanks in advanceHi,
Please check the following settings :
Go to IMG --> General Settings ---> Currencies ---> Check Exchange Rate types
Select the Exchange Rate Euro and check mark the EMU check box . Save it
Rgds,
Suresh -
Intercompany billing exchange rate is not updated on change of the currency
Hi,
I create a intercompany billing via VF01 with reference to a outbound delivery, and the currency is picking up from the customer master which is USD. But I need to change the currency to be the same as the PO which is GBP. So I change the currency field from USD to GBP in VF01 (both header and item level), the exchange rate field remain unchanged and still showing the USD rate instead, and the price is wrong.
Anyone know what happend to this? Appreciate your advice.
Thanks,
YHHi Damu,
Once you change the header currency, line item currency will be changed also.
My problem is even I've change the currency to let say GBP, the exchange rate shown in the billing document is still in USD rate, but NOT in GBP rate. -
Premiere Pro CC features not showing up
I purchased a Creative Cloud membership today and was expecting the version of Premiere Pro to be different, particularly to have the feature that syncs audio in multpiple clips, but the software appears to be exactly the same. Are those new features I've seen in the videos not available yet, or am I missing something. How can I tell if I have Premmire Pro CC and not Premiere Pro CS6?
ThanksHow can I tell if I have Premmire Pro CC and not Premiere Pro CS6
-
Pro & cons for Routings vs Ref Rate Routing
One of our plants uses Reference Rate Routings (CA31, 32, 33). Many colors of vinyls are processed the same way producing many individual material numbers. So one Ref Rate Routing has many Materials assigned to it.
Recently an engineer in other plant found that he can do the same material assignment on Routings (CA01, 02, 03)
What are the pro & cons for Routings vs Ref Rate Routing when doing Material assignments
thank you for any information you can provide
AltheaDear,
Reference routing is usually used for calling the set of operation can be used manr routings so it is reusage.
Suppose a cleaning operation is having 5 operations. This is used in may places. Then create a routing and call this operation set wherever required. Hence you need not repeate defining the operations in each time.
For more details...see below link
http://help.sap.com/saphelp_47x200/helpdata/en/7e/d42611455911d189400000e8323c4f/frameset.htm -
How do I adjust BITC rates in Final cut Pro
I have a client who i am doing sound design for on his short film. I received an m4v in 23.98 with the dialog track embedded. I performed my dialog edit and exported a BWF from Digital performer which all synced perfectly here. He in turn dropped the new dialog track into FCP and sync wanders and gets worse as the film plays on. he is in 23.98, 16/48K audio and all should be the same there as here.
Help?
Also, I had a client say he once had to adjust the samples by key frames in FCP to make sure sync stayed consistant throughout the film. Any one else heard of this?
Thanks in advance.Hey Shane-
I've been using Digital performer combined with FCP, AVID and Premiere for a number of years and nary an issue. And yes, i am running everything to match his timeline. 23.98 and 16/48K.
I ran into an issue one time before though on a 2 1/2 hour feature that sync began to wander toward the end of the film. The editor adjusted the samples so it was actually running at 47.23256K instead of a solid 48K word rate. Not sure how he did this, jsut wondered if this might be the issue here. he is running all on a Mac and FCP 6.06.
The film is on 65 minutes so not sure where the sync problem could occur. He's doing some troubleshooting on his end. And please understand this is the director, not the editor I'm dealing with. Could very well be operator error . -
Premiere Pro 5.5 Not Showing Entire Recording
When I try to open a recording in Premiere to edit it it only shows the first minute or so of the video, while opening in other programs (MPC, VLC, etc.) renders the entire recording. VLC actually says the AVI is broken and needs to be repaired, and that there may be problems with seeking, but doesn't give any other information. It still works in VLC despite the error message however, and seeks just fine. I haven't had any luck researching this on Google so I thought I would try here and see if anyone else has experience this issue.
Ok here is the info.
Premiere Pro Ver. 5.5.0, no updates.
Windows 7 Professional, 64-bit
6GB of ram, Core i7 920
nVidia GTX 470
Not getting any error messages, I have a Canopus ADVC110 capture device that I'm capturing analog video with. I'm using the capture tool in Premiere with default settings, except that device control is turned off. I get no errors or notices when the capture is running or when I make the files. However when I go to import the clip into my timeline the duration is less than a minute long. When viewing the file in other program's it is fine, even in another editor like Vegas. I have several clips that exhibit the same behavior. Occasionally I have a clip that works fine without the duration issue, but I'm not sure why as none of the settings for the capture have changed.
The clip I'm looking at currently is roughly 15min long and shows up to be about 43sec in Premiere.
Video info
General
Complete name :
Format : AVI
Format/Info : Audio Video Interleave
Format_Commercial_IfAny : DVCPRO
Format profile : OpenDML
File size : 3.19 GiB
Duration : 15mn 3s
Overall bit rate mode : Constant
Overall bit rate : 30.3 Mbps
Video
ID : 0
Format : DV
Format_Commercial_IfAny : DVCPRO
Codec ID : dvsd
Codec ID/Hint : Sony
Duration : 15mn 3s
Bit rate mode : Constant
Bit rate : 24.4 Mbps
Width : 720 pixels
Height : 480 pixels
Display aspect ratio : 4:3
Frame rate mode : Constant
Frame rate : 30.027 fps
Original frame rate : 29.970 fps
Standard : NTSC
Color space : YUV
Chroma subsampling : 4:1:1
Bit depth : 8 bits
Scan type : Interlaced
Compression mode : Lossy
Bits/(Pixel*Frame) : 2.353
Stream size : 3.03 GiB (95%)
Audio
ID : 1
Format : PCM
Format settings, Endianness : Little
Format settings, Sign : Signed
Codec ID : 1
Duration : 15mn 3s
Bit rate mode : Constant
Bit rate : 1 536 Kbps
Channel(s) : 2 channels
Sampling rate : 48.0 KHz
Bit depth : 16 bits
Stream size : 166 MiB (5%)
Interleave, duration : 966 ms (29.00 video frames)
And a screenshot of what I'm seeing in Premiere. -
My internet was down for over 24hrs after a storm. During that time, my IPad completely shut down and I can't get it going again. I studied the manual but couldn't find a similar topic. I reset it and now it is totally goofed up.
Does anyone have any ideas or should I just take it to an Apple store and pay?? Any solutions you may have, PLEASE use simple words as I am not a pro, by any means....probably why I'm in this situation.
Thank you in advance.Look at iOS Troubleshooting Wi-Fi networks and connections http://support.apple.com/kb/TS1398
iPad: Issues connecting to Wi-Fi networks http://support.apple.com/kb/ts3304
iOS: Recommended settings for Wi-Fi routers and access points http://support.apple.com/kb/HT4199
Additional things to try.
Try this first. Turn Off your iPad. Then turn Off (disconnect power cord) the wireless router & then back On. Now boot your iPad. Hopefully it will see the WiFi.
Go to Settings>Wi-Fi and turn Off. Then while at Settings>Wi-Fi, turn back On and chose a Network.
Change the channel on your wireless router. Instructions at http://macintoshhowto.com/advanced/how-to-get-a-good-range-on-your-wireless-netw ork.html
Another thing to try - Go into your router security settings and change from WEP to WPA with AES.
How to Quickly Fix iPad 3 Wi-Fi Reception Problems
http://osxdaily.com/2012/03/21/fix-new-ipad-3-wi-fi-reception-problems/
If none of the above suggestions work, look at this link.
iPad Wi-Fi Problems: Comprehensive List of Fixes
http://appletoolbox.com/2010/04/ipad-wi-fi-problems-comprehensive-list-of-fixes/
Fix iPad Wifi Connection and Signal Issues http://www.youtube.com/watch?v=uwWtIG5jUxE
~~~~~~~~~~~~~~~
If any of the above solutions work, please post back what solved your problem. It will help others with the same problem.
Cheers, Tom -
I have a new movie rental in my iTunes account on my Mac Book Pro but does not show up on Apple TV. All my other purchased movies are in there OK. Any suggestions?
It won't show up on your Apple TV until it is fully downloaded into iTunes on your computer, have you done this.
-
I downloaded and bought a movie from iTunes on my iPad and now want the same movie on my MacBook Pro but its not offering me to download it, it giving me the options of buying it which I already did. How I get the movie onto my MacBook?
You can connect the iPad to your Mac's iTunes and do File > Devices > Transfer Purchases, that should copy it over to the Movies part of your library.
Depending upon what country that you are in, and whether the film studio allows it, you might also be able to re-download it on your Mac via the Purchased link under Quicklinks on the right-hand side of the iTunes store home page. -
I am trying to use an external 3g modem made by Huawei model e173s-6 and when I do connect it on my usb port the macbook pro just do not recognize it. I own a 2012 model with mountain lion 10.8.2 . What should I do ?
I still don't know what happened to my test Aperture Library after the update to 3.4...Not only were my previews lost, but so were the original images! Needless to say, I haven't bothered to update the main library on the Mac Pro because I don't want to deal with this level of uncertainty (even with backups in place).
-
Macbook pro 13' screen not lighting up?
Usually before i go to sleep i eject my time machine; plug in the magsafe and close the lid on my 13 inch mid 2010 Macbook pro runnign ML 10.8.2 with 4 gigs ram . The next day I just lift the lid up and hit some keys on my external keyboard and the mac wakes up. For the past few days, close to a week now, when i do this the screen doesn't light up. I can tell that its on because of some faint outlines of the log in box, but the screen just deosn't light up. If i unplug the magsafe the screen lights up like all its normal. I can then plug it back in and it works fine. I know its a minor inconvenience and I haven't worried to much about it. However, today i did all this and logged on. My mac wasn't conencting to my wifi and system preferences was jsut refusing to open. I decided to restart it but it kept asking me to force quit all my applications (Mail Calendar Itunes Safari, System Pref, notes, Istat pro Now its working fine again.
Do you think that these two incidents are related? I assume that they are isolated but its still strange.
How can i fix the screen problem? and should i worry about this second wifi/system pref issue?
thanks alot!You need to 're-bless' the system folder next time you get it started.
Try the tips here:
http://support.apple.com/kb/TS1440
Regards,
Deb. -
Hello I have a problem with Mac Pro, iPhoto does not want to stay open and close as I can figure this out? thanks
Refer below link once
App doesn’t open | Progress wheel spins continually -
Pdf form created in Acrobat 9 Pro Extended does not function properly when viewed by Reader
Hello all-
I have created a form in Acrobat 9 Pro Extended and have an issue because when others view the form in Adobe Reader some of the functions do not work- such as the attach a file button I created, or the save, print buttons (all are execute a menu item). These work on my Acrobat 9 Pro Extended but not on Reader.
I have tried saving many different versions- with security (password) and made sure to allow printing and commenting, editing, digital signatures etc...
Without any security...
Even tried extending features in Adobe Reader!
The response from others is that it all works, except the ATTACH A FILE button- when they click on it it compresses, but, nothing happens!
I don't know what else to do! (I guess people could just attach things to the e-mail that is generated from the submit button, but worried people might forget at that step once they are past that section on the form and they jump to email to submit).
Help please!
A.I've already extended the rights and made sure to save to activate that... as well as password protected the docs etc... still nothing...
I am aware that those with Basic Adobe Reader need rights extended to be able to use functions available to Adobe Pro. -
After recent update to my macbook pro itunes will not open, it just bounces when I click on it
fter recent update to my macbook pro itunes will not open, it just bounces when I click on it
Means they are going to mess up your iPhoto Library pictures database so it's unreadable by older versions of iPhoto on older OS X operating systems.
You have the choice to right click on the iPhoto Lbrary and inside is a folder called Origianls, use the Finder to Duplicate this folder, then move the OriginalsCopy out of the iPhoto Library folder and save it elsewhere.
I dont' think Apple will every intentionally touch the originals, however it's possible they could.
Maybe you are looking for
-
Performance syntax loop at and read table
in the routine , for reading one line in a internal table , the syntaxe loop at xxx where and read tabl exxx with key XXXX has a great difference on performance or not?
-
what do I do with this error? "could not complete your request because the file appears to be from a camera model which is not supported by the installed version of camera raw?"
-
Read EDI-856 interface data in ABAP program
HI Experts, I have a requirement to read the incomming EDI-856 interface data from ABAP program and generate an IDOC. I have gone through few EDI-856 documents and theformat in which to read the data . Request you to let me know the code logic , fun
-
HTML Signature with logo does not display when read by clients
I have had this problem for a while now. I am using 10.5.6 and Apple Mail to send all of my emails. I have only one signature for my business email account which is a GoogleMail pro account. I have set up a signature to display my business logo which
-
IMAC 27 - attached a second monitor - mouse tracking problem
After attaching a 19 inch lcd via the mini display port and a dvi adapter my mouse tracking has gone bad, not just from one screen to the other even just on the main screen if you move the mouse around it jumps several inches and is very inaccurate.