To SAP-XI Product Developement... Bug in Integration Scenario, swimlanes..?

Hi,
I am not sure whether such questions can be posted in this forum or not.. but i have no other alternative. If this is not the right forum i will not post such queries again.
I have posted a query reg "Integration Scenario, swimlane diagrams" in XI Forum, but there were no replies to that. So i like to forward the same to the Product Develpment team and like to know if this is a bug or things do work like this..?
I have designed my Integration Scenario in Design Time, imported the same into configuraton time so that the Configuration Objects (Receiver Determination, Interface Determinaiton, Receiver agreements) are automatically created. I tried the sacenario and its working fine.
In my scenario, i have 3 swimlanes corresponding systems, Sys1, sys2, sys3.
In Run1, a connection is made b/n sys1's and sys2's actions. Imported into Configuration, Configuration objects created,(Rx Determination Created) scenario working properly.
In Run2, another connection is made b/n sys1 and sys3's actions (sys1 and sys2 still remain connected). Imported into Configuration, receiver determinaition changed according to the scenario, scenario working properly.
In Run3, the connection b/n sys1 and sys2 is removed and again imported into configuration, but the receiver determination is not changed to cater to the scenario in design time. The old receiver determinaiton is not getting deleted/chaged). The receiver deteminaiton reused instead of being changed, which is incorrect according to the scenario.
Is this a bug in the software or do things work like this only... U can reach me at Siva_Maranani(at)satyam(dot)com
Cheers,
Siva Maranani.

Hello Aamir,
you are right, I don't need virtual receivers for my scenaro and I also don't want to use them.
However, when modelling my scenario with an integration scenario in the design, I'm forced to do this and I would like to know whether there is any way to avoid this.
In order to be able to use a business service on the sender side, it seems I have to select the checkbox 'External party with B2B communication' in my integration scenario. When importing & configuring the scenario in the directory, I am then able to select by business service for the sender side. However, for the receiver side I have to specify a virtual receiver, otherwise I cannot finish the config wizard.
Any more ideas?
Best regards,
Matthias

Similar Messages

SAP MRS product features and modules integrated

Hi
Looking for SAP MRS product details with modules integrated
Regards,
Parameshwar

Yes i possibly feel there are some more services which are not activated in the system.
Try using Transaction NWBC in SAPGUI & then follow the various Applications to to reach to appointment booking.
Once NWBC opens follow the service advisors cockpit. /DBM/SERVICE_ADVISOR.
Step by step it will first ask you to search vehicle / customer & then once vehicle is searched you can continue to proceed to appointment application to book an appointment
Ensure the master data is set up for the vehicle & customer to be able to search in the service advisors cockpit
Ensure you have all the roles of the assigned to your user id these application appear in the your users menus.
Regards,
Sachin Balmiki

Integration Scenario Swimlane

Hi Experts,
which the best way in developing the integration scenario to go with swimlane diagram
actions or not considering the industry standards
Regards
Metha

Hi
use Actions swimlane integraiton scenario.
Go thru this-
Companion Guide to Integration scenario
SAP Launches Inititative for Industry Content
http://help.sap.com/saphelp_nw2004s/helpdata/en/ec/21ee117a909f44a8b69794b9ed6221/content.htm

Can sap ps be used for product development for cost monitoring?

sap-pp is configured but client insisting for product development they want sap-ps ,can sap ps be used for product development for cost monitoring in textile industry?and how to configure with reference to sap-pp?
venkatdas vanga

Hi,
SAP PS has good Integration with PP and FI CO modules. So goes well along the ETO scenario.
The normal process is that Project is created and goes in to design phase , where we design product as per customer's requirement . Design BOM helps in this.Once you design is ready you can generate Production Orders base on MRP generated with reference to Projects.
All the cost including overheads are charged to the Project as actual cost.
These costs are later settled to Cost Center.
Refer this link for detailed information http://www50.sap.com/businessmaps/76FC9D515D244754A09308BA54E97C42.htm
Thanks,
Nitin

Docus about 3rd-party defined integration scenario: SAP Web AS u2013 SAP NW

Hi all,
we have an SAP integration solution which we want to get certified. We are interested in the third-party defined integration scenario: u201ESAP Web AS u2013 SAP Netweaver Application Serveru201C as similar products have this certification. Where can we find technical details/documents about this certification. Is there any sample scenario for this certification that we can use as a template.
Thank you in advance for your help.
Cheers
Jack

Dear 'jackwhite',
The SAP Integration and Certification Center (SAP ICC) has confirmed Uphantis ([http://www.uphantis.com]) as its first u2018SAP Certified in Integration Servicesu2019 partner within the EMEA region. SAP AG has certified Uphantis as its Consulting and Certification Service Partner for Independent Software Vendors. This certification enables Uphantis to implement and supervise the integration of ISV software with SAP solutions. The ISV will then be able to have this integration certified by SAP (u2018SAP Integration Certificationu2019).
Uphantis Integration Services ([http://www.uphantis.com/uis]) is an integration specialist with extensive knowledge in this field. Uphantis integration consultants have been trained by SAP and are certified in many different areas of expertise. This makes Uphantis a unique consulting partner, well acquainted with the requirements for developing an SAP certified solution.
Perhaps we should get in contact?
Best Regards,
KENNY VAN SLEUWEN
Senior Integration Consultant
Uphantis Integration Services
'SAP Certified in Software Integration Services'
I www.uphantis.com/uis
Uphantis | Connecting our future

ALE/IDOC and RFC/BAPI Integration Scenarios with SAP DS for ESA v3

Hi,
we are planning two PoCs of Integration Plattforms. One of our major requirement set is SAP Integration into our existing SOA.
Because we also have R/3 4.7 Systems in production, we are planning to test ALE/IDOC and RFC/BAPI Integration scenarios with these Integration Plattforms.
My question is:
We are looking for are smart solution to get a SAP Test Environment, where we can test ALE/IDOC und RFC/BAPI Integration scenarios.
It is possible to do this with SAP DS for ESA v3 or shall we better use IDES for that purpose?
Best regards,
Steven

Hi Abhishek,
This is our scenario. We are doing an integration of SAP HR r/3 system with the CRM system. We need housing information details of the employees which we have in custom infotype 9310 in SAP HR system and we need those details in the CRM system. So am planning out for an ALE/IDOC approach for the integration and gonna maintain the 9310 details in a custom table. In the CRM system, we gonna build a BOL layer for accessing the 9310 details. Also i'm preparing a HLD for this process. I wanna read and go through few same HLD's before i submit my proposal to my client. Please suggest me and help me out.
Thanks in advance.
Regards,
Arunmozhi.

Doubt : What is the Exact use of Product/SWCV in an integration process?

Hi XI Gurus,
The XI Documentation(Regarding SWCV) says "All design work is organised By SWCV.This makes sense, as interface logically belongs to a Software component Version"
DOUBT 1 :
What is the Exact Use/Role of Product/SWCV in an integration process? - Is it ONLY for DOCUMENTATION purpose? ie., to just understand the underlying Software used ? OR DOES it have a Technical say in the way the Business System behaves ?.
DOUBT 2 :
What will happen if I create a junk Product(I mean something Meaningless), a junk SWCV BUT while creating a Technical System(I choose Type as WEB AS) BASED on the Junk Product/SWCV ,I give VALID hostname etc...I then create a Business System with data valid data .
Now i have created a TS & BS with Valid HOSTNAME & CLIENT etc. BUT based on the junk Product/Junk SWCV.
NOW in integration dir.,will i be able to configure this Business System as Service for Sending IDOCS/FILE(or anything for that matter)?
If It will work then That means The product/SWCV IS ONLY for documentation purpose.Please rply in detail !
DOUBT 3:
When I import the junk SWCV INTO the IntegrationRepository
& choose import of RFC/IDCOC & give valid connection details to a SAP System , Will it import the RFC Regardless of the Junk SWCV I am using ??
DOUBT 4 :
Business System A(Sender) : SAP R/3(For Example)
Business System B(Receiver) : APO (For Example)
ASSUMPTION : Business system A & B have DIFFERENT SWCV.
Now Which Business System's SWCV do I import in my Integration Repository ?The Sender's or Reciever's ?
and Why ??
It would be great if anyone can help me out.
Thanks,
Arun

hi arun..
>>>>>DOUBT 3:
When I import the junk SWCV INTO the IntegrationRepository
& choose import of RFC/IDCOC & give valid connection details to a SAP System , Will it import the RFC Regardless
yes....
>>>>DOUBT 4 :
Business System A(Sender) : SAP R/3(For Example)
Business System B(Receiver) : APO (For Example)
ASSUMPTION : Business system A & B have DIFFERENT SWCV.
Now Which Business System's SWCV do I import in my Integration Repository ?The Sender's or Reciever's ?
and Why ??
...generally, u import only ofr Sender business system cos tht is the system wher u have defined all the objects for the scenario...
and integration process for Receiver is defined..
>>>DOUBT 1 :
What is the Exact Use/Role of Product/SWCV in an integration process? - Is it ONLY for DOCUMENTATION purpose? ie., to just understand the underlying Software used ? OR DOES it have a Technical say in the way the Business System behaves
the product defines the name genaerllly, the SWCV definesd within the product...there can be many SWC in an product...so an SWC is the smallest component in an product...
>>>>>DOUBT 2 :
What will happen if I create a junk Product(I mean something Meaningless), a junk SWCV BUT while creating a Technical System(I choose Type as WEB AS) BASED on the Junk Product/SWCV ,I give VALID hostname etc...I then create a Business System with data valid data .
Now i have created a TS & BS with Valid HOSTNAME & CLIENT etc. BUT based on the junk Product/Junk SWCV.
NOW in integration dir.,will i be able to configure this Business System as Service for Sending IDOCS/FILE(or anything for that matter)?
If It will work then..
...YOU WILL BE ABLE TO.....
REGARDS...
hope it helps...
vishal

Total No of pages different in report printed using Crystal Report XI R2 vs SAP Crystal Reports, developer version for Microsoft Visual Studio (File Version 13.8)

Currently in our application, we are using Crystal Report XI R2 for generating the reports. We are in the process of upgrading the Crystal Report to SAP Crystal Reports, developer version for Microsoft Visual Studio (File Version 13.8). I updated that on my machine and all the reports work fine. I didn't have to modify any of the reports.
However when comparing the reports, we found that there are few reports on which the total no. of pages differ from the report displayed using Crystal Report XI R2 vs SAP Crystal Reports, developer version for Microsoft Visual Studio (File Version 13.8). Comparing the reports, it looks all the data that were fit on one page earlier with version XI R2 doesn't fit on the same page with version 13.8, thereby increasing the page counts.
The fonts, page margins everything set on report itself. Nothing being set in the code.
Both the application is using the same report that is pulling the data from the same database. Our application is a web application.
Any suggestion, why this is happening.
Thanks.
Sanjay

I am not sure what is being compared here?
CRXI R2 designer to CRVS?
CR XI R2 in some version of .NET to CRVS?
CR XI R2 using RDC SDK to CRVS?
Also, is this happening on your development computer or after you deploy?
If you compare the the "Page setup" options dialog between reports that work and those that do not work, do you see any difference?
Is this a web or a win app?
Are you seeing the same issue when viewing and exporting - say export to PDF?
What is the printer driver used and it's version?
- Ludek
Senior Support Engineer AGS Product Support, Global Support Center Canada
Follow us on Twitter

Select SAP's product or another OLAP tool and why?

Hi Experts,
In an effort to validate my opinion of SAP BW/NetWeaver Capability - In terms of flexibility, KPI Development, and Predictive Analytics, If you had to decide, would you select SAP's product or another OLAP tool and why??

Hi,
All data warehouse products provide flexibility and good tools to build strategic reports focus on KPI. All of them also provide easy to use tools to display and organize analytic information..... I guess that the decision about what product will be chosen will be based on how difficult is to pull (and keep updated) the data from the transactional systems behind. In other words, if you are running SAP to manage a big part of your day to day transactional system, go for BW / BI.
In SAP BW / BI, you have a large group of extractors and predefined processes that enable you to pull the data from the SAP systems into multidimensional indexed data providers. Once the data is there, you could easily develop your own queries and reports, organizing them in almost whatever way you want and building almost any possible KPI you want. You cloud display and manipulate these queries and reports using almost any single PC product you want......
Now, if your data sources are not base on SAP , you have to build your own data extractors. You also have to build your own data warehouse targets (data providers) and your own mapping processes. You will be dealing with normalization and database definition concepts. Being technically feasible probably is not the best path.
If you have an hybrid situation (some SAP systems and some NO SAP system), you will evaluate how many strategic data sources you have in each size and take a decision base on that
Regards
Sudheer

SAP PP (Production Planning) Master Data Definitions

SAP PP (Production Planning) Master Data Definitions and Transaction codes.

SAP PP (Production Planning) Master Data Definitions
• Factory Calendar
• Material Master
• Resource • Bills of Material (BOM)
• Production versions
• Master recipe
Factory Calendar: The factory calendar is defined on the basis of a public holiday calendar. The public holiday and factory calendar is a central module in the SAP System. It is assigned to a specific plant during the initial system setup and therefore used in many areas (e.g. in Logistics and in Human Resources) in the system.
Material Master: Material master comprises if all the basic data of the material for each department. The data covers all the relevant information required for the transactional flow e.g. sales, Planning, Production, Quality, Purchasing, Costing etc. Material master covers all the descriptive and control data and the flow of information depends on fields maintained within it. The integration of all material data in a single database object eliminates redundant data storage. Material Masters are created once and can be changed or extended whenever required
Bill of Materials: Bill of Materials or commonly called BOM is a formally structured list of components that make up a product or assembly. The list contains the material number of the component together with the quantity and unit of measure. BOMs are used in their different forms in various situations where a finished product is assembled from several component parts or materials. Resources: Resources are production facilities and persons involved in a production process that have capacities. They are subdivided into categories to specify their suitability for certain purposes or their use in certain processes
Product Versions: A production version determines which alternative BOM is used together with which task list/master recipe to produce a material or create a master production schedule. For one material, we can have several production versions for various validity periods and lot-size ranges. The production version determines the following:
• The BOM alternative for a BOM explosion.
• The task list (master recipe) and any alternate, as needed.
• Lot-size restrictions and validity parameters.
Master Recipes: A master recipe defines the following data that is required for the production of materials without relating to a particular order: processing steps, resources, material components, and control information for the process control level. Master Recipe enables to plan the production of materials (products). Therefore, Master Recipe is used as a template for process orders and run schedules as well as a basis for product costing. In a Recipe
• The Phases (work steps) to be carried out during production.
• The activities to be performed in the operations as a basis for determining dates, capacity requirements and costs.
• The use of materials during production.
• The use of resource.

Feedback Form for SAP NetWeaver Gateway development tools

Hi all, if you wish to send your feedback (bug, new feature, and general feedback) to SAP NetWeaver Gateway development tools u2013 Xcode, Visual Studio, Blackberry, Search console, please use the attached feedback forms:
For Xcode and Visual Studio tools please use Feedback form XC&VS.rtf
For Eclipse, Blackberry and Search console please use Feedback form BB&SC.rtf

Hi Michal,
While installing the Netweaver gateway plugin for eclipse Juno version through the following link
https://tools.hana.ondemand.com/juno under Help -> Install New Software... I have encountered below error.
Can you please help me in resolving it.
An error occurred while collecting items to be installed
session context was:(profile=epp.package.jee, phase=org.eclipse.equinox.internal.p2.engine.phases.Collect, operand=, action=).
Unknown Host: https://tools.hana.ondemand.com/juno/features/com.sap.core.editor.feature_1.0.6.jar
tools.hana.ondemand.com
Many thanks in advance.
Regards,
Parthi

Installing SAP NetWeaver CE Developer on a 64-bit server. Is it possible?

I have found that in the doco below that SAP NetWeaver CE Developer is only available for 32-bit servers. But it looks like there are other SAP documents on the site informing that there is also a 64-bit version.
Would you know it there is a 64-bit version of CE? Tx.
Caution
Development systems can be installed on 32-bit
Windows only.
n 10 GB free disk space
n Min. 1 CPU with 3 GHz
n 2 GB RAM (minimum)
n Paging file size: 2x RAM
SAP NetWeaver Composition Environment 7.1
Edited by: Hugo Vega on Sep 30, 2008 7:21 PM

Dear Hugo,
as explain in the Product Availabilty Matrix, for CE7.1
Developer Workplace (based on Eclipse) is available only for Windows 32 bits.
The server part is available on 64 bits platforms.
Patrice Brossier
Then I found the following:
On the following links you will find the Composition Environment Product Availability Matrix and the installation guide of Composition Environment 7.1 Developer Edition.
SAP NetWeaver Composition Environment 7.1
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/e0e9cc7b-0469-2a10-d3a8-f4f04b30fb0b
For accessing the Product Availability Matrix document the service marketplace access is required.
Cheers, 8V

Million+ views - SAP Crystal Reports, developer version for MS VS: Updates & Runtime Downloads

1,000,000! One million views in just over three years;
SAP Crystal Reports, developer version for Microsoft Visual Studio Updates & Runtime Downloads;

Re. runtime distribution limits; WIN apps, free. Web apps used internal to your organization, free. Web apps deployed external to your organization, extra licensing applies. Check with sales: 866-681-3435
Worldwide Office Locations | SAP
- Ludek
Senior Support Engineer AGS Product Support, Global Support Center Canada
Follow us on Twitter

SAP IP product changes after aquisition of outlooksoft

Hi
Are there any product chnages in the SAP IP product after the outlooksoft aquisition. I am very much interested to know the challenges in IP implementation.
Vijay Mandiram

See my blog on this topic:
/people/prakash.darji/blog/2007/07/25/sap-business-planning-consolidations-outlooksoft-vs-bi-integrated-planning
Additionally, see Ryan's blog:
/people/ryan.leask/blog/2007/09/03/what-is-cpm-and-what-is-happening-with-sem-and-bi-integrated-planning
If you have any more specific questions, feel free to post them...
Cheers,
Prakash

Rough BOM at the time of product development

dear expert:
excuse my nascent approach. i dont know how to address this but my client is asking to fullfill the below requirement
we are Apparel manufacturing company. as per our scenerio we pass a long development period approx 6 months before receiving confirm sales order. we need to create preliminary or rough BOM at this stage to manage the sudden load of information. as during the development time we just got little information about the product and it is subject to change is it possible to create a rough BOM and update it continuously as and when required with proper material code and finally when we are sure we need to confirm it as final BOM.
please suggest.
best regards
javed iqbal

Dear
We are dealing this kind scinario in small project business where total product developement takes mini 4-5 motnhs and based on design BOM is not confirmed 100% .
So we do estomation through Quotation stage -VA21 where we follow Unit costing methodology with variable and item details based on the customer requirement.Some time we also create Engineering BOM based on the design lay out and after final approval and contractual aggrement , we logg sales order for cost roll up based on the approve BOM and routing .There may be lot consumables as well low cost material required , which we add directly at Production order but the most crtifcal items are in Qoutation or estimation stage /Engineering BOM.
But if you want to create BOM at the intial stage and subsequently , want to trace the changes doen then you should adop ECM ( Engineeting Change Management ) .For engineering change management to be activated you need to define in
modification parameters that ECM is to be active.
Following is the link where you can get details
http://sap-img.com/pp007.htm
engineering change management
Engineering change management
Regards
JH

To SAP-XI Product Developement... Bug in Integration Scenario, swimlanes..?

Similar Messages

Maybe you are looking for