Windows 8.1 Deploy and Capture stops with no error

I have a standard deploy and capture TS for Windows 8.1 using the volume media 'install.wim' file.
The only modification I have made is to add a few applications into the TS.
Once started from WinPE, the TS goes smoothly, deploying the OS and the applications. It then restarts and just goes to the login prompt. The TS doesn't continue as expected, rebooting to WinPE and running the capture.
I've checked the smsts.log file and I cant see any obvious errors or anything that could cause this behaviour. The only warning I can see is 'Active reqeust handle is empty, registering with new active request handle' though I'm not sure if this is even
related.
So the process I see is:
Boot to PXE WinPE
Select build and capture TS for windows 8.1
Install OS
Install Apps
Restart
Login screen
Anyone have any ideas?
SCCM 2012 R2
Windows 8.1 Professional

Found the solution.
Was due to one of the apps I was installing requiring .NET 3.5.

Similar Messages

HT202159 I started download of OS X Mountain Lion and it stopped with "An error has occurred" with no option to resume download. When I go to appstore it shows but again.

I started download of OS X Mountain Lion and it stopped with "An error has occurred" with no option to resume download. When I go to appstore it shows but again.

Try this Discussion...
https://discussions.apple.com/message/19032230#19032230

I am trying to download iTunes on my new desktop computer (Windows 7, 64 bit). It starts installing, and then stops with the message- "The System Administrator has set policies to prevent this installation." I am the sole user- please help.

I am trying to download iTunes on my new desktop computer (Windows 7, 64 bit). It starts installing, and then stops with the message- "The System Administrator has set policies to prevent this installation." This is a stand alone computer and I am the sole user.   Please help.

This is a Microsoft Windows Issue.
From a MS Support Engineer:
"Hi,
·        Is the computer on a domain?
·        Is the issue isolated to only this software or you get the same error message with other software’s as well?
Try the steps below and check if it helps.
Step 1:
Run the software setup file as an administrator and check if it helps.
a. Right click on the setup file of the software that you are trying to install.
b. Select “Run as administrator”.
Step 2:
Temporarily disable the antivirus software running on the computer and check if you are able to install the software.
Disable antivirus software
Warning:
Antivirus software can help protect your computer against viruses and other security threats. In most cases, you shouldn't disable your antivirus software. If you have to temporarily disable it to install other software, you should re-enable it as soon as you're done. If you're connected to the Internet or a network while your antivirus software is disabled, your computer is vulnerable to attacks.
Step 3:
a. Click Start, type "Local Security Policy" (without quotes) and press enter.
b. Click on Software Restriction Policies.
c. In the right pane, double click on the "enforcement".
d. Select “All users except local administrators”.
e. Click Ok and restart the computer and check if the issue is fixed."

TS5376 I have a laptop that i am running with Windows Vista. A while ago, it stopped running iTunes and comes up with the error : Runtime Error: R6034 - An application has made an attempt to load the C runtime library incorrectly.

I have an iMac as my home computer, upgraded to this about a year ago from a windows pc and love it.
However...
I have a HP Compaq laptop that i am running with Windows Vista, which I use when travelling. A while ago, I believe on an update, to either windows or itunes, it stopped running iTunes and comes up with the error : Runtime Error: R6034 - An application has made an attempt to load the C runtime library incorrectly.
I have a reasonable amount of tunes stored on my laptop, and am unable to ascertain as to whether this fix for allowing itunes to work again will delete my music folder and lose all the tunes i have on my laptop already?
The contents of my music folders on my laptop and iMac are not the same, as they are not synced!
Any help please on this would be appreciated!
Pete

See Troubleshooting issues with iTunes for Windows updates. The second box covers the basic removal and repair steps. The rest is links to other useful resouces.
tt2

Book Module: Export to PDF and Blurb stops with error at two page spread

I have a 66 page book created in the book module..
When exporting to PDF the export stops with the error:
"An error occurred while saving the book.
There was an error creating the PDF file. "
The same occurs (at the same book page) when exporting to BLURB
"An error occurred while creating the book."
The creation or export always stops at the same page which is a two page spread. Interestingly there is a two-page spread before that didn't throw an error. I tried to move the problem page to the end of the book. That didn't help because the next two page spread in the book throws an error.
Any ideas or help?
Lightroom version: 4.0
Computer: Windows 7, Quadcore, 8 GB RAM

Hi, sorry I do not have a solution but I too have a very similar issue in that the book is the same size but the export to PDF does not start at all
I have tried reducing the image dpi settings. Jpg quality and still nothing
The only success I have had is if I duplicate the book, delete all but 8 pages and then export at full dpi settings of 300 and 100 percent jpg quality
Any more pages and nothing
It's a great tool and would buy it if this feature actually worked. Oh yeah I only have the trial version at the minute to give it a good thorough test
I have looked for solutions but like your query they are all unanswered
Does adobe actually offer any support or is this all user solutions?
Did you find a solution by the way?

Windows 7 professional backup and restore stop working after installation of acronis true image 2010

HI,
windows 7 professional backup and restore stop working after installation of acronis true image 2010. it generates a error code 0x81000019. please help.
thanks
Song

Sankalp,
I too have the error 0x81000033 when running the full system image backup. I could not assign a drive letter to my 100mb drive with the Disk Management. So, I went into the diskpart and ran the following commands:
diskpart
list disk
DISKPART> list par
Partition ### Type              Size     Offset
Partition 1    System             100 MB 1024 KB           ( 78.2 of 96.0MB free )
Partition 2    Reserved           128 MB   101 MB
Partition 3    Primary             73 GB   229 MB
Partition 4    Recovery           423 MB    74 GB
sel dis 0
list par
select partition 1
assign letter=q
fsutil usn queryjournal q:
fsutil usn deletejournal /D q:
After diskpart, I opened the "My Computer" and see that I have 78.2 of 96.0MB free. Despite that, I ran these commands on the new q: drive:
C:\Windows\System32>q:
Q:\>fsutil usn queryjournal q:
Error: The parameter is incorrect.
The FSUTIL utility requires a local NTFS volume.
Q:\>fsutil usn deletejournal /D q:
Error: The parameter is incorrect.
The FSUTIL utility requires a local NTFS volume.
Q:\>
Any help is appreciated.

I tried to install Icloud on my windows 8 touch PC and it stops at the end and say there is an error.. any Ideas?

I tried to install icloud on my windows 8 touch PC and it stops at the end and says Error? Any Ideas what is wrong?

This is all I could find: http://support.microsoft.com/kb/2643995

"Accounting-Start" and "Accounting-Stop" with same "user name" and "session Id" recorded in different RADIUS servers.

Hi,
I have questions about "Accounting-Start" and "Accounting-Stop".
1.If a NAS configured to have a primary and a backup RADIUS server. To start with all the “Accounting-Start” records will be in the primary RADIUS server. Later on the primary server goes down (Primary server won’t tell the NAS?). When sessions stop, the NAS sends the “Accounting-Stop” to the secondary. I understand the “Start-Stop” record with the same “user name” and “session-id” ideally should be recorded in the same server. If this situation happens what should both the NAS and RADIUS server do?
2.A NAS configured to have a primary and backup RADIUS server. To start with all the “Accounting-Start” records will be in the primary RADIUS server. Later on the administrator decided to change the primary server (as there are problems with the previous primary). sessions stop, the NAS sends the “Accounting-Stop” to the new primary. This ends up the “Accounting-Start” and “Accounting-Stop” with the same “user name” and “session Id” in two RADIUS servers.
To summarize, how to avoid the ”start-stop” pair ends up in different servers ? If it does, is it an issue for RADIUS application ?
Cheers,
1.If a NAS configured to have a primary and a backup RADIUS server. To start with all the “Accounting-Start” records will be in the primary RADIUS server. Later on the primary server goes down (Primary server won’t tell the NAS?). When sessions stop, the NAS sends the “Accounting-Stop” to the secondary. I understand the “Start-Stop” record with the same “user name” and “session-id” ideally should be recorded in the same server. If this situation happens what should both the NAS and RADIUS server do?
2.A NAS configured to have a primary and backup RADIUS server. To start with all the “Accounting-Start” records will be in the primary RADIUS server. Later on the administrator decided to change the primary server (as there are problems with the previous primary). sessions stop, the NAS sends the “Accounting-Stop” to the new primary. This ends up the “Accounting-Start” and “Accounting-Stop” with the same “user name” and “session Id” in two RADIUS servers.
To summarize, how to avoid the ”start-stop” pair ends up in different servers ? If it does, is it an issue for RADIUS application ?
Cheers,

vignesh and BalusC,
following is the code in front controller's doFilter method. is this not thread safe?
        HttpServletRequest req = (HttpServletRequest) request;
        HttpServletResponse res = (HttpServletResponse) response;
        HttpSession session = req.getSession();
        somepackage.User user;
        if(session.getAttribute("user") == null){
            user = new somepackage.User();
            session.setAttribute("user", user);
        }else{
            user = (somepackage.User) session.getAttribute("user");
        }user object maintains all information about a user. if it is in session scope, everything should work fine.
another observation is after some time of usage, both people in different systems are getting same session.getId()
in my logout page i am using
session.invalidate();
thanks,
moses

It will not let me install Itunes 1.6.1 on my Windows 7 OS and keeps coming with an error and rolls back, what can i do?

Everytime i tried to update my i tunes to 1.6.1 it wouldn't let me and came up with this error.
I'd hit OK then it would roll back and start again and end with this error
Anything i can do?

These ones are typically caused by underlying problems on the PC that also often cause Windows Updates to fail to install. If we can fix the Windows Update trouble, we can usually get the iTunes trouble cleaned up en passant.
Go into your Windows update and try to check for new updates. If updates install, stock up on the ones you're behind on, restarting the PC if requested to do so. After the restart, try installing iTunes again. Does it go through this time for you?
If windows updates fail to install, go into your Update History and doubleclick the failures. What alphanumeric codes appear for you? Are they also 80070002, or some other number? (If they're another number, what number are you getting?)

TS3297 when i try to open itunes store error comes up saying windows experienced a problem and program stopped working

can some help me everytime I try to open itunes store an error comes up saying windows experienced a problem and program stopped working. Itunes opens this just happens when I go to the store

Hello Ducati848,
Thanks for using Apple Support Communities.
For more information on this, take a look at:
iTunes for Windows Vista or Windows 7: Troubleshooting unexpected quits, freezes, or launch issues
http://support.apple.com/kb/ts1717
Best of luck,
Mario

Is it possible to uninstall IE 11 from Windows Server 2012 R2 and replace it with the latest version of IE 10?

Is it possible to uninstall IE 11 from Windows Server 2012 R2 and replace it with the latest version of IE 10? We have a remote desktop farm setup with 2012 R2 servers and we are publishing some web links that only work with IE10. As a result, we need to
downgrade the remote desktop servers to IE10. I have a feeling that this isn't possible, but if I could get a definitive answer, I would greatly appreciate it, thank you!

Hi,
Agreed with DonPick.
Internet Explorer 11 is preinstalled with Windows 8.1 and Windows Server 2012 R2.
More information regarding Internet Explorer 11, please check:
Internet Explorer 11 - FAQ for IT Pros
http://msdn.microsoft.com/en-us/library/dn268945.aspx
Best regards
Michael Shao
TechNet Community Support

TS1717 i rented a movie on iTunes and it stopped with 28 minutes left in the movie it froze and will not advance. How can i get it to play.

i rented a movie on iTunes and it stopped with 28 minutes left in the movie it froze and will not advance. How can i get it to play.

In iTunes select the movie and hit Delete. Follow the prompts and then empty the trash.

While updating my 3GS to 5.0.1 iTunes stops with an error of -5000, any suggestions?

While updating my iPhone 3GS to 5.0.1 using iTunes on PC with Windows 7, the application stops with an error of (-5000), any suggestions?

If you are getting a network timeout error then try temporarily turning off your firewall and antivirus software until the download has completed. If it's a different error then if you say what it is somebody might be able to help.

Quicktime 7 will not install fully on my windows 7 64 home premium keeps stoping with an error while trying to create directory

I have a Laptop with Windows 7 64 Home premium, I have tried a few times to install Quicktime 7 on my laptop. But keeps stopping with an error saying "An error occured while attemping to create the directory: C:\windows\Installer\{F5266D28-E0B2-4130-BFC5-EE1-55AD514DC}
Windows is fully up todate, I have no virus or anything harmful on my computer. After clicking retry the error keeps popping up. I then click on cancel and delete the downloaded quicktime installer. I shut down my computer and try again. Same error with not luck. Any help?

Just in case, let's check for disk/file damage.
The first thing I'd try with that is running a disk check (chkdsk) over your C drive.
XP instructions in the following document: How to perform disk error checking in Windows XP
Vista instructions in the following document: Check your hard disk for errors
Windows 7 instructions in the following document: How to use CHKDSK (Check Disk)
Select both Automatically fix file system errors and Scan for and attempt recovery of bad sectors, or use chkdsk /r (depending on which way you decide to go about doing this). You'll almost certainly have to schedule the chkdsk to run on startup. The scan should take quite a while ... if it quits after a few minutes or seconds, something's interfering with the scan.
Does the chkdsk find/repair any damage? If so, can you get an install to go through properly afterwards?

I am running Windows Vista 64 bit and i get a runtime error R6034. How can i fix this and get itunes to work?

I am running Windows Vista 64 bit and i get a runtime error R6034 when i was updating itunes. How can i update itunes with out getting this error?

* Make sure that you do not use [[Clear Recent History]] to clear the "Browsing History"
App tabs and Tab Groups (Panorama) are stored as part of the session data in the file sessionstore.js in the [http://kb.mozillazine.org/Profile_folder_-_Firefox Firefox Profile Folder]
* http://kb.mozillazine.org/Session_Restore

Windows 8.1 Deploy and Capture stops with no error

Similar Messages

Maybe you are looking for