To Split a variable to get the date.

Hi all,
I have a variable 'file1'.This variable stores the names of the pdf files located in SAP directory.
The name of the file is like:'PDFST0000098357US81042008',
which containg order no ,sales org, month and date of that file creation.
Now i have a requirement to extract that month and year from this variable.
Also some filenames have different format like'PDFIPF......' instead of 'PDFST.....'.
so kindly suggest how to extract month and year from this variable.
Thank You.

Hi,
You can use fm STRING_REVERSE to reverse the name of the filename. Then go ahead and extact eight letters of the reversed string and once again reverse that, so at this you will get the date part in DDMMYYYY.
Again you can manipulate this date string to get back the original date.
1. use string_reverse input filename, output reversed string.
2. reversedstring+0(8) will extract date part ( reverse ).
3. Again reverse this string.
But seeing at the example, this would be tougher if the date in the filename is not in DDMMYYYY, meaning that if the date is 1st april 2008 then if the date format is DMYYYY(142008), then the logic would go for a toss.
Thanks and regards,
S. Chandramouli.

Similar Messages

Unable to get the data from the stored procedure

Hello Folks,
I have this stored procedure and am trying to get the data from the table stage_bill but for some reason i am not sure its not pulling the data.Am a beginner in pl/sql Can any one please help to find out. I can give the code below.
create or replace procedure Load_FADM_Staging_Area_TEST(p_data_load_date date) is
-- local variables
v_start_date                date;
v_end_date                  date;
-- cursor starting
CURSOR c_get_data
IS
SELECT
   a.batch_id
,a.beginning_service_date
,a.bill_id
,a.bill_method
,a.bill_number
,a.bill_received_date
,a.bill_status
,a.bill_type
,a.change_oltp_by
,a.change_oltp_date
,a.client_datafeed_code
,a.client_id
,a.created_date
,a.date_of_incident
,a.date_paid
,a.deleted_oltp_by
,a.deleted_oltp_date
,a.duplicate_bill
,a.ending_service_date
,a.event_case_id
,a.event_id
,a.from_oltp_by
,a.oltp_bill_status
,a.review_status
,'HRI' schema_name
, sysdate Load_date
,'ETLPROCESS001' Load_user
,v_start_date as Row_Effective_Date
,null Row_End_date
from stage_bill a
where
--created_date >= to_date('20101031 235959', 'YYYYMMDD HH24MISS')
created_date >= v_start_date
and
--created_date <= to_date('20101111 235959', 'YYYYMMDD HH24MISS')
created_date <= v_end_date
and not exists
(select
b.batch_id
,b.beginning_service_date
,b.bill_id
,b.bill_method
,b.bill_number
,b.bill_received_date
,b.bill_status
,b.bill_type
,b.change_oltp_by
,b.change_oltp_date
,b.client_datafeed_code
,b.client_id
,b.created_date
,b.date_of_incident
,b.date_paid
,b.deleted_oltp_by
,b.deleted_oltp_date
,b.duplicate_bill
,b.ending_service_date
,b.event_case_id
,b.event_id
,b.from_oltp_by
,b.oltp_bill_status
,b.review_status,
b.schema_name,
b.Load_date,
b.Load_user,
b.Row_Effective_Date,
b.Row_End_Date
from STG_FADM_HRI_STAGE_BILL_TEST b)
-- cursor o/p variables
v_batch_id                  stage_bill.batch_id%TYPE;
v_beginning_service_date    stage_bill.beginning_service_date%TYPE;
v_bill_id                   stage_bill.bill_id%TYPE;
v_bill_method               stage_bill.bill_method%TYPE;
v_bill_number               stage_bill.bill_number%TYPE;
v_bill_received_date        stage_bill.bill_received_date%TYPE;
v_bill_status               stage_bill.bill_status%TYPE;
v_bill_type                 stage_bill.bill_type%TYPE;
v_change_oltp_by            stage_bill.change_oltp_by%TYPE;
v_change_oltp_date          stage_bill.change_oltp_date%TYPE;
v_client_datafeed_code      stage_bill.client_datafeed_code%TYPE;
v_client_id               stage_bill.client_id%TYPE;
v_created_date          stage_bill.created_date%TYPE;
v_date_of_incident    stage_bill.date_of_incident%TYPE;
v_date_paid         stage_bill.date_paid%TYPE;
v_deleted_oltp_by     stage_bill.deleted_oltp_by%TYPE;
v_deleted_oltp_date    stage_bill.deleted_oltp_date%TYPE;
v_duplicate_bill     stage_bill.duplicate_bill%TYPE;
v_ending_service_date   stage_bill.ending_service_date%TYPE;
v_event_case_id        stage_bill.event_case_id%TYPE;
v_event_id            stage_bill.event_id%TYPE;
v_from_oltp_by         stage_bill.from_oltp_by%TYPE;
v_oltp_bill_status   stage_bill.oltp_bill_status%TYPE;
v_review_status     stage_bill.review_status%TYPE;
v_schema_name        varchar(50);
v_Load_date          date;
v_Load_user            varchar(50);
v_Row_Effective_Date   date;
v_Row_End_Date         date;
Begin
if p_data_load_date is null then
    select (sysdate - 7), (sysdate - 1) into v_start_date, v_end_date from dual;
elsif p_data_load_date is not null then
   select (p_data_load_date - 7), (p_data_load_date - 1) into v_start_date, v_end_date from dual;
else
    raise_application_error('-20042', 'Data control - GetDataControlAuditData : Date parameter must be a date of this or a previous week.');
end if;
-- cursor c_get_data loop begin
OPEN c_get_data;
    LOOP                                                       -- cursor c_get_data loop begin
      FETCH c_get_data
       INTO
        v_batch_id,
v_beginning_service_date,
v_bill_id ,
v_bill_method ,
v_bill_number,
v_bill_received_date,
v_bill_status,
v_bill_type,
v_change_oltp_by,
v_change_oltp_date,
v_client_datafeed_code,
v_client_id,
v_created_date,
v_date_of_incident,
v_date_paid,
v_deleted_oltp_by,
v_deleted_oltp_date,
v_duplicate_bill,
v_ending_service_date ,
v_event_case_id ,
v_event_id,
v_from_oltp_by,
v_oltp_bill_status,
v_review_status,
v_schema_name,
   v_Load_date,
   v_Load_user,
   V_Row_Effective_Date,
   v_Row_End_Date;
    EXIT WHEN c_get_data%NOTFOUND;
insert into STG_FADM_HRI_STAGE_BILL_TEST
batch_id
,beginning_service_date
,bill_id
,bill_method
,bill_number
,bill_received_date
,bill_status
,bill_type
,change_oltp_by
,change_oltp_date
,client_datafeed_code
,client_id
,created_date
,date_of_incident
,date_paid
,deleted_oltp_by
,deleted_oltp_date
,duplicate_bill
,ending_service_date
,event_case_id
,event_id
,from_oltp_by
,oltp_bill_status
,review_status
,schema_name
,Load_date
,Load_user
,Row_Effective_Date
,Row_End_Date
values(
       v_batch_id,
v_beginning_service_date,
v_bill_id ,
v_bill_method ,
v_bill_number,
v_bill_received_date,
v_bill_status,
v_bill_type,
v_change_oltp_by,
v_change_oltp_date,
v_client_datafeed_code,
v_client_id,
v_created_date,
v_date_of_incident,
v_date_paid,
v_deleted_oltp_by,
v_deleted_oltp_date,
v_duplicate_bill,
v_ending_service_date ,
v_event_case_id ,
v_event_id,
v_from_oltp_by,
v_oltp_bill_status,
v_review_status,
v_schema_name,
v_Load_date,
v_Load_user,
v_Row_Effective_Date,
v_Row_End_Date ) ;
COMMIT;
    END LOOP;
    CLOSE c_get_data;

Maybe you need something else, like
CREATE OR REPLACE PROCEDURE load_fadm_staging_area_test (
p_data_load_date DATE
) IS
v_start_date   DATE;
v_end_date     DATE;
BEGIN
SELECT NVL (p_data_load_date, SYSDATE) - 7,
         NVL (p_data_load_date, SYSDATE) - 1
INTO   v_start_date,
         v_end_date
FROM   DUAL;
MERGE INTO stg_fadm_hri_stage_bill_test b
USING      (SELECT *
              FROM   stage_bill
              WHERE created_date BETWEEN v_start_date AND v_end_date) a
ON         (b.bill_id = a.billl_id)
WHEN NOT MATCHED THEN
    INSERT     (batch_id,
                beginning_service_date,
                bill_id,
                bill_method,
                bill_number,
                bill_received_date,
                bill_status,
                bill_type,
                change_oltp_by,
                change_oltp_date,
                client_datafeed_code,
                client_id,
                created_date,
                date_of_incident,
                date_paid,
                deleted_oltp_by,
                deleted_oltp_date,
                duplicate_bill,
                ending_service_date,
                event_case_id,
                event_id,
                from_oltp_by,
                oltp_bill_status,
                review_status,
                schema_name,
                load_date,
                load_user,
                row_effective_date,
                row_end_date
    VALUES     (a.batch_id,
                a.beginning_service_date,
                a.bill_id,
                a.bill_method,
                a.bill_number,
                a.bill_received_date,
                a.bill_status,
                a.bill_type,
                a.change_oltp_by,
                a.change_oltp_date,
                a.client_datafeed_code,
                a.client_id,
                a.created_date,
                a.date_of_incident,
                a.date_paid,
                a.deleted_oltp_by,
                a.deleted_oltp_date,
                a.duplicate_bill,
                a.ending_service_date,
                a.event_case_id,
                a.event_id,
                a.from_oltp_by,
                a.oltp_bill_status,
                a.review_status,
                'HRI',
                SYSDATE,
                'ETLPROCESS001',
                v_start_date,
                NULL
END load_fadm_staging_area_test;Whenever you code a cursor and a loop, ask yourself. Do I need that?
Regards
Peter

How to get the date n time for log in ODI

Hi,
I wanna ask, what is the syntax for getting the date n time when i specify the location of log for Interface. Thanks.

I quite do not get what you are trying to achieve here.
- In a mapping, use the DBMS engine sysdate command.
- In a variable, you can refresh the variable value using a "select sysdate from dual" type of query.
- You can also use the appropriate odiref substitution method to get a date. For example:
Current year is: :<%=odiRef.getSysDate("y")%>
Hope this helps.
-FX

Getting the data based on dates

Hi All,
In my application i am not able to retrieve the data from database between two dates.
while entering the dates i am entring using :
+ "',to_date('+ fromdate+ "','DD-Mon-YYYY HH24:MI:SS'),"
as in database i have kept my fromdate type as "varchar2"
So while selecting data i have written the query as :
String sqlQuery =
"select SID,SERVER_NAME,DOWNTIMETYPE,FROMDATE,TODATE,FROMTIME,TOTIME,TIMETAKEN,DOWN_REASON from SS_UPDOWNTIME where (FROMDATE >='"
+ frmdate
+ "' OR (FROMDATE between '"
+ frmdate
+ "' and '"
+ todate
+ "')) ";
but i am not able to get the data between the two selected dates
Regards,
Anupama

Hi Anupama,
'between' wont work because you have taken dates as varchar2.
Just try like this.
Take "Date" type in database and in java take java.sql.Date
java.sql.Date sqlDefaultDate = new java.sql.Date(System.currentTimeMillis());
System.out.println("sqlDate: "+sqlDefaultDate);
// this will be in the format 2008-11-13 , So we can pass sqlDefaultDate variable to backend
Regards,
Lakshmi Prasad.

Query to get the date from to

hello anyone,
How can I create a query having 2 date and 2 variable of kind:
from 1 date 05/06/2004
to   2 date 15/06/2004
yes for 2 days
no for 1 day
that is,
i wish get the date with yes for 2 days and not for 1 day, this is, that I want
05/06/2004 sabato
06/06/2004 domenica
08/06/2004 martedì
09/06/2004 mercoledi
11/06/2004 venerdi
12/06/2004 sabato
14/06/2004 lunedi
15/06/2004 martedithanks in advance

Hi,
The WHERE clause controls which rows will be displayed.
If your requirements change, change the WHERE clause to reflect them.
For example:
DEFINE     from_date     = "TO_DATE ('05/06/2004', 'DD/MM/YYYY')"
DEFINE     to_date          = "TO_DATE ('15/06/2004', 'DD/MM/YYYY')"
DEFINE     yes_cnt          = 3
DEFINE     no_cnt          = 2
SELECT &from_date + LEVEL - 1        AS dt
FROM     dual
WHERE     MOD ( LEVEL
         , &yes_cnt + &no_cnt
         )          BETWEEN 1
                   AND      &yes_cnt
CONNECT BY LEVEL <= 1 + &to_date
                     - &from_date
ORDER BY dt;This will work as long as you want the first &yes_cnt rows to be displayed (assuming there are that many), and the next &no_cnt rows not to be displayed, then another &yes_cnt rows to be displayed and another &no_cnt rows not to be displayed, and so on.
I assume that &yes_cnt is a postive integer, and that &no_cnt is a non-negative integer. (That is, &no_cnt may be 0.)

Define a join in Webi Report which gets the data from two Excel files

Hello,
I have the following excel records as a source for my Webi Report:
Excel 1
Excel 2
Date
Month
Month
Year
Year
Total Number of Days
in Month
No. Of Exec
Functional
Area
Now I need to show No. of executions/Total Number of Days in Month per functional area (Where Month of Excel 1 is Month of Excel 2).
For this:
I have Merged, Month of Excel 1 and Month of Excel 2, Year of Excel 1 and Year of Excel 2.
Created a variable vNoofExec , No. of Exec/Total Number of Days in Month.
Created a graph, with Merged Month, Merged Year, vNoofExec with Region Color on 'Functional Area'.
But, it doesn't work.
If I replace vNoofExec with No. Of Exec I get the data, but not with vNoofExec.
Any Idea how we can get a solution for this?
Best regards,
Praveen.

Hi Amit,
Thank you for your reply.
I tried putting them in a table to see if I am getting the value for vNoofExec but, no, I am not getting. Here is the dummy data for both the excels:
1. Excel 1:
Year
Month
Week
Date
No. Of Exec
Functional Area
2013
1
30
26
1
FA1
2013
2
21
20
12
FA2
2013
3
21
21
1
FA3
2013
4
21
22
5
FA4
2013
5
21
23
2
FA5
2. Excel 2:
Year
Month
TotalDays
2013
1
31
2013
2
28
2013
3
31
2013
4
30
2013
5
31
What I found is, if I create a measure like, [No. of Exec] where ([Functional Area]="FA1") and use this measure in the graph I am able to see the data even if I use Total Days in the Graph, but, I cannot create multiple measures like this because for me number of Functional Areas will be changing always.

How to get the data from a cluster table to BW

Dear All,
I want to extract the data from R/3 to BW by using 2 tables and one Cluster B2.
Actually my report contains some fields from PA2001, PA2002 and one cluster table B2 (Table ZES). Can I create View by using these 3 tables? If it is not possible how can I get the data from the cluster? Can I create generic datasource by using cluster tables directly?
In SE11 Transaction the Cluster (table ZES) is showing invalid table.
I referred some Forums, but no use.
Can any body tell me procedure to get the data from a cluster (table ZES) ?
Waiting for you results.
Thanks and regards
Rajesh

HI Siggi,
Thank you for your reply..
I am also planning to do FM to get the data. But it is saying that the Cluster table ZES does not exist (ZES is the the standard table, in SE11 also).
How can I use the Fields from the that table.?
What can I do now, can you please explain me about this point.
Waiting for your reply.
Thanks and Regards
Rajesh
Message was edited by:
rajesh

Why do we get the data from a view to a report.

hi
why do we get the data from a view to a report. is it possible to get the data from a view in all the cases?

hi Jyotssna,
Suppose you are planning to get the data from multiple tables then you got to specify seveal condtions and make use of joins which results in poor performance in fetching the data . In order to improve the performance we make use of views where the conditions of different tables are defined and the data is fetched accordingly.
Regards,
Santosh

DataSource 0CRM_SRV_PROCESS_H is not getting the data in infopackage

Hi Masters,
I have to upload the data from the datasources 0CRM_SRV_PROCESS_H and 0CRM_SRV_PROCESS_I into Infopackages, but when i execute the infockage it shows
No data available
Diagnosis
The data request was a full update.
In this case, the corresponding table in the source system does not
contain any data.
System Response
Info IDoc received with status 8.
Procedure
Check the data basis in the source system.
In CRM system when i checked it in RSA3 it is showing the data.
I checked the older posts but i havn't find any answer post. I also checked the SAP note 692195, but it is applicable for 4.0. I am working on 7.0.
Please suggest something so that I can get the data into infopackage.
Thanks and Regards,
Vicky.

Hi Lokesh,
Thanks for your reply.
Actually i am working on such a project where they don't give SAP_ALL authorization to any user. If we need any authorization we need to show them particular SAP note of same version in my case it is CRM 7.0. If you know any note on CRM 7.0 which gives all the authorization objects required or it says we need SAP_ALL authorization please tell me.
It will be very help full for me to get the authorization.
Regards,
Vicky.

Refernce Nav igational Attribute is not getting the data in Infoprovider

Hi,
I am facing the issue with Reference Characteristic which is a navigational attribute for which data is not getting populated in the cube.Please find the below scenario.
We have three characteristics 0RECV_WBS_E , 0WBS_ELEMT, ZPSBUSA .Char 0RECV_WBS_E is reference of 0WBS_ELEMT.
0RECV_WBS_E__ZPSBUSA,0WBS_ELEMT__ZPSBUSA are the Navigational attributes of ZPSBUSA, these two are maintained as Navigational attributes in the cube and at info object level. The Nav Attribute 0RECV_WBS_E__ZPSBUSA is not getting the data in infocube where as 0WBS_ELEMT__ZPSBUSA is getting the data .The data is available for the two Nav attributes in the info object ZPSBUSA .Can you please suggest why this reference Nav attribute 0RECV_WBS_E__ZPSBUSA is not getting data in the infocube.
Thanks,
SUbhash

Hi,
I am facing the issue with Reference Characteristic which is a navigational attribute for which data is not getting populated in the cube.Please find the below scenario.
We have three characteristics 0RECV_WBS_E , 0WBS_ELEMT, ZPSBUSA .Char 0RECV_WBS_E is reference of 0WBS_ELEMT.
0RECV_WBS_E__ZPSBUSA,0WBS_ELEMT__ZPSBUSA are the Navigational attributes of 0WBS_ELEMT, these two are maintained as Navigational attributes in the cube and at info object level. The Nav Attribute 0RECV_WBS_E__ZPSBUSA is not getting the data in infocube where as 0WBS_ELEMT__ZPSBUSA is getting the data .The data is available for the two Nav attributes in the info object 0WBS_ELEMT .Can you please suggest why this reference Nav attribute 0RECV_WBS_E__ZPSBUSA is not getting data in the infocube.
Thanks,
SUbhash
Edited by: MarkSubhash on Dec 9, 2011 11:11 AM

I am not getting the data in Bex from the cube

Hi Experts,
i am not getting the data from the cube to Bex,
cube having the data, but i am not able to see this data in the Bex result area.
Can any one help me.
Best regards,
Bhaskar

Hi
In the manage cube, is reporting symbol is there for your requests
If you have any red requests delete them and refresh
If all requests having reporting symbols you may check the BEx without any filters or selection criterions
Regards
N Ganesh

Iam not getting the data on screen after using the user exit zxpadu01

Dear Freinds
            As per my requirement when the user enters value Ansal it should get defaulted to Amount field (bet01 ) based on the wage type
i have written calculation ( q0008-bet01 = ansal/100) before it getting defaulted to bet01, i found that value is not getting default on the screen for bet01 once i enter value for Ansal , please any body correct my code
in   ZXPADU02 i have written the code as below :
data : wa_p0008 like p0008,
        i0008 like p0008,
       l_v_ANSAL type ANSAL_15,
       l_v_amount type PAD_AMT7S.
CASE innnn-infty.
when '0008'.
CALL METHOD cl_hr_pnnnn_type_cast=>prelp_to_pnnnn
EXPORTING
prelp = innnn
IMPORTING
pnnnn = wa_p0008.   -- HERE I GOT ALL THE DATA EXCEPT BET01
if wa_p0008-lga01 = 'MFPY'.
l_v_ansal = wa_p0008-ansal.
l_v_amount = l_v_ansal / 100.
move l_v_amount to wa_p0008-bet01.
CALL METHOD cl_hr_pnnnn_type_cast=>pnnnn_to_prelp
EXPORTING
pnnnn = wa_p0008 --- HERE I CAN SEE EVEN THE BET01 IS FILLED
IMPORTING
prelp = innnn.         --- HERE I CAN SEE LGART BUT NOT AMOUNT VALUE
endif.
when others.
endcase.
IN ZXPADU01 I HAVE WRITTEN AS BELOW:
data : wa_p0008 like p0008,
        i0008 like p0008,
       l_v_ANSAL type ANSAL_15,
       l_v_amount type PAD_AMT7S.
CASE innnn-infty.
when '0008'.
MOVE-CORRESPONDING innnn to wa_p0008.
CALL METHOD cl_hr_pnnnn_type_cast=>prelp_to_pnnnn
EXPORTING
prelp = innnn
IMPORTING
pnnnn = wa_p0008.
if wa_p0008-lga01 = 'MFPY'.
l_v_ansal = wa_p0008-ansal.
l_v_amount = l_v_ansal / 100.
move l_v_amount to wa_p0008-bet01.
CALL METHOD cl_hr_pnnnn_type_cast=>pnnnn_to_prelp
EXPORTING
pnnnn = wa_p0008   --- I CAN SEE ONLY WHEN I COME AGAIN
IMPORTING
prelp = innnn.
endif.
when others.
endcase.
Now my problem is as follows :
               i have entered the value for Ansal (ex: p0008-Ansal = 1000) ..........and i say enter then i should found the calculated value for the ansal through my coding
and it should display in bet01 as 10 ( q0008-bet01 = p0008-ansal /100)
but i dont find the value 10 being displayed for the field bet01 on the screen when
user enters Ansal as 1000 .........even then i have saved it to test the scenario......
now i came in displayed mode (pa20 ) for the infotype 008 for the same personnel no for the same dates .....where i created the record........i found that the value
bet01 is there i.e i can see the value bet01 as 10 ( my requiremnt here matching)
but when the user say enter during the time of creation of the record the value
bet01 is not getting defaulted with 10 .........why iam not able to understand
PLEASE ANY BODY HELP ME IN THIS REGARD
regards
shanti.

Hi Pranesh,
               i have used the logic which you hav given as below
in ZXPADU02
FIELD-SYMBOLS <fs> TYPE ANY.
ASSIGN ('(MP000800)Q0008-betrg') TO <fs>.
if <fs> is assigned.
<fs> = l_v_amount . --- amount as (ansal /100 i.e 1000/100 = 10) 10
endif.
still iam not getting the data for the field bet01
this is the coding i am using
data : wa_p0008 like p0008,
        i0008 like p0008,
       l_v_ANSAL type ANSAL_15,
       l_v_amount type PAD_AMT7S.
FIELD-SYMBOLS <fs> TYPE ANY.
CASE innnn-infty.
when '0008'.
MOVE-CORRESPONDING innnn to wa_p0008.
CALL METHOD cl_hr_pnnnn_type_cast=>prelp_to_pnnnn
EXPORTING
prelp = innnn
IMPORTING
pnnnn = wa_p0008.
if wa_p0008-lga01 = 'MFPY'.
l_v_ansal = wa_p0008-ansal.
l_v_amount = l_v_ansal / 100.
move l_v_amount to wa_p0008-bet01.
ASSIGN ('(MP000800)Q0008-betrg') TO <fs>.
if <fs> is assigned.
<fs> = l_v_amount .
endif.
CALL METHOD cl_hr_pnnnn_type_cast=>pnnnn_to_prelp
EXPORTING
pnnnn = wa_p0008
IMPORTING
prelp = innnn.
endif.
when others.
endcase.
please help me as iam still not getting (value in bet 01) when i press enter once i enter value in ansal feild.
regards
shanti.

Not able to get the data in COSB Table

Hi Colleagues,
I have created a Project and assign the WBS number to a Sales order and also have done all the settings in Result Analysis.
But still not able to get the data in COSB table.
Could you please suggest me the steps and process, Might be i have missed something..
Thanks in Advance
Regards
Nitin

Hi Ken,
I have below mentioned requirement
COSB will show value by object number and need to pass the object number to PRPS table to find the corresponding WBS element and then pass the WBS element to VBAP table to find the corresponding SO line item.
Please let me know as Functional prospect what I have to do to bring this values in COSB table.
Regards
Nitin

Not able to get the data from synchronous Webservice To BPEL process

Hi All,
My requirement is : Third party has some webservice.They are pushing data to that Webservice(Wsdl).
Third part WSDL example : http://ipaddress:port/name/Service.svc?wsdl ( This is just example format of their WSDL)
After that I need to get that data into my BPEL process and update my system.
When I built My Snchronous BPEL process I imported third party WSDL(http://ipaddress:port/name/Service.svc?wsdl) through 'import WSDL' in dialog.After that I automatically got the (request and response schema elements) parameters from that WSDL.I gave input and output of the BPEL process from those elements.
I pasted that third party URL iin SOAPUI and I got their operations and schemas.Based on that I had choosen the elements for 'input' and 'output' of the BPEL processes.I am also getting the schema structures in 'Assign' or 'Transform' activity.
I built the whole process.
I have the Process.
Now Client is pushing data to their WSDL(http://ipaddress:port/name/Service.svc?wsdl) as it is their data pushing interface.But that data is not coming to my BPEL process and instance is not being created in EM console.
As I have imported their WSDL into my BPEL process,I need to get the data.But I am not getting the data.
Is there any problem in MY BPEL process?
(or)
DO I need to use 'Webservice' Adapter in 'Exposed Services' Swimlane in Composite Editor to have the third party URL, so that they Can push the data to that WSDL in turn that data comes into my BPEL process?
Can anybody help me this case?
once again my requirement is :
Client pushes the data through their WSDL url -----> I need to get that data into MY BPEL process --> I have my own WSDl to take that details into my system.

I will explain the requirement in small paragraph:
There are two applications.One is our application(X) and another one is third party application(Y).
I need to update in my application(X) based on data coming from application(Y).
I am using SOA as a middle tier to have communication between Y and X.
(Ex: if they send some info like event type 'event1' from Y ,I need to update that 'event1' data in my X application)
The work at third party application is :
According their info,They will push data from their end to their WSDL( http://ipaddress:port/name/Service.svc?wsdl ).
They are telling they can only send the data to their WSDL( http://ipaddress:port/name/Service.svc?wsdl ).
They will not consume our BPEL process(I think they might be wrong at this point of time).They have one WSDL to send or push the data from their end.
The work at from our side(SOA & X application)
From that point ,our BPEL process has to receive that data and update that data into my application(X).
I hope You understand my requirement.
Can you guide me through how to achieve this task as they are telling they have to use their WSDL to push the data?
(or)
Do I need to take 'Webservice' adapter into Exposed Services Swimlane in Jdeveloper to have their webservice(third party WSDL),If it is So Can you tell me the details how to take 'input' and 'output' for BPEL process?
(or)
Can YOu suggest me to talk to them to consume my BPEL process directly?
Thanks
Edited by: 899283 on Aug 17, 2012 4:55 AM

Problem Using HTTP Dispatcher -- Could Not able to get the data in JSP

Hi, I am using HTTP Dispatcher to send my events to particular URL which is a JSP page. I am trying to populate the received event through URL and populate to a oracle data base. But could not able to get the data in Oracle database.
Code is :
<h1>JSP Page</h1>
<%
long type = 0;
String tagId = null;
String timeStr = "0";
String deviceName = "";
// Get Event Parameters
// Available Parameters: id, siteName, deviceName, data, time, type, subtype, sourceName, correlationId
try
type = Long.parseLong(request.getParameter("type")); // Get type
tagId = request.getParameter("id"); // Get tagId
timeStr = request.getParameter("time"); // Get time
          deviceName = request.getParameter("deviceName");
catch (Exception e)
out.println( "Error: "+e.getMessage() );
          // Write into DB.
          try {
          if ((tagId == null) || (type != 200) ){
               // Do Nothing
               //return;
          } else {
               OracleDataSource ods = new OracleDataSource();
               String URL = "jdbc:oracle:thin:@//3.235.173.16:1525/vislocal";
               ods.setURL(URL);
               ods.setUser("cus");
               ods.setPassword("cus");
               Connection myConn = ods.getConnection();
               Statement stmt = myConn.createStatement();
               String selectQuery =
                         "SELECT MAX(rfid_raw_reads_id) as max_id FROM "+
                    "cus.rfid_raw_reads ";
               ResultSet rs = stmt.executeQuery(selectQuery);
               String maxId = "1";
               if (rs.next()) {
                    maxId = rs.getString(1);
               String selectMaxTagIDQuery =
                         "SELECT MAX(rfid_raw_reads_id) as max_id FROM "+
                    "cus.rfid_raw_reads WHERE tag_id = '" + tagId + "'" ;
               stmt = myConn.createStatement();
               rs = stmt.executeQuery(selectMaxTagIDQuery);
               String maxTagId = "1";
               if (rs.next()) {
                    maxTagId = rs.getString(1);
               long primaryKey = 1;
               long tagKey = 1;
               try {
                    primaryKey = Long.parseLong(maxId) + 1;
                    tagKey = Long.parseLong(maxTagId) + 1;
               } catch (Exception e) {
               long currentTime = System.currentTimeMillis();
               long updateKey = (tagKey - 1);
               String updateQuery = " UPDATE cus.rfid_raw_reads SET read_end_time = " + currentTime + " WHERE rfid_raw_reads_id = " + updateKey;
               Statement updateStmt = myConn.createStatement();
               updateStmt.execute(updateQuery);
               String query =
                    "INSERT INTO cus.rfid_raw_reads (rfid_raw_reads_id, tag_id,device_name,read_start_time) VALUES ("+ primaryKey + ",'" + tagId + "'," + deviceName + "'," + System.currentTimeMillis() + " )" ;
               Statement insertStmt = myConn.createStatement();
               insertStmt.execute(query);
               myConn.commit();
               myConn.close();
          } catch (Exception e) {
%>
<p>For browser debug:
<%
out.println( "Type="+type+" ID="+tagId +" time="+timeStr );
%>
Kindly suggest where is the problem...
Thanks and regards
Mohammad Nasim Akhtar

HI Prabhat,
Thanx for your reply, I worked out and able to receive the data in oracle database, Actually there was some problem in insert Query. Now I have tested the same... and able to edit the same in the Database.....
But I am facing a new problem, Http Dispatcher in SES console is displaying all the Events generated as well as event in Que but there is no events in the Event Send. I guess it is not able to send the events.....?????
Event statical is showing like this
Events Received: 0 (0.00/sec)
Events Generated: 311 (0.19/sec)
Events Sent: 2 (0.19/sec)
Queued Events: 309 (0.19/sec)
Kindly suggest where is the problem, Is it a JSP problem or OSES end problem.....
Thanks and regards
Nasim

To Split a variable to get the date.

Similar Messages

Maybe you are looking for