To swap internal number range with an External number range

Hi SAP Guru's,
We have a a landscape with SAP which is divided in 2 ERP's.
One being the Central server and other the Local.
The scenario is that when ever i create a maintenance order in the central server a replication should  happen in the local server and the order number should be same as that of central server.
And the scenario should be Vice versa i.e whenever the order is created in a local server it should be replicated in the central.
Both the number ranges used in central and local server are different.
I am not able to find out how we can achieve the above stated scenario.
Please advice what should be my POA.
Regards,
Ankit

Hi ,
1.You  have to find the Difference that Wether the order is created using Integration or Manually from the System.
2.The Standard SAP  uses Function Module Number_get_next or Badi  to fetch the Number  and the number  is assigned to Order.
Thats how the internal number ranges  works .
3.Now your Scenario is to Owerite the Original number given by system  by the function module or BADI  .
4.Now you find that  Plug in Point and Write an Implicit enhancment Point and  Owerite the Original  value given by System.
So then only you can Owerite the Original Value.
Let me know if you are  not clear .
Regards,
Kishor

Similar Messages

  • How Apple can provide iMac serial number associated with the IMEI number in the invoice

    My iMac was stolen and I would like to locate it, but I do not have with me the serial number.
    The receipt from the store I bought the iMac only has the IMEI number.
    How Apple can provide me the serial number associated with the IMEI number in the invoice?

    Locating your Mac using Find My Mac do not use serial number.
    Use a computer browser to track
    https://www.icloud.com/#find
    Note:
    1. Find My Mac must be enabled .
    2. Mac has Internet connection.
    3. Mac is not switch off.

  • Accouting Document Number along with Invoice Document Number

    Hi All,
    I want to see the Accouting Document Number along with Invoice Document Number
    while Posting the invoice in MIRO.
    Regards
    Arjun

    Check
    miro (invoiced document number & account documber number)

  • Parallel Number maintanance with Material Serial Number

    Hi Gurus,
    Need to maintain the SUPPLIERS PART NUMBER along with the serial number.
    When ever serial number is traced, the part number too need to be traced.
    Please advice.
    Regds,
    NalindaR

    Dear Uts
    Thanks for the reply. Seems my requirement is different.
    Supplier sends a different number with the material code.
    Ex: Material A., Quantity 100.
    At GRN point we need to enter 100 different serial numbers and 100 different suppier specific numbers.
    These 100 suppier specific numbers are different to each other.
    Simply we need to enter 100 serial numbers and another 100 different numbers together.
    Please help.

  • Bios serial number difference with box serial number

    I live in Viet Nam. I have just bought new MSI GE 2PC laptop on 03/07/2015. On 04/07/2015 I installed window and check bios serial number, I detected this number is difference with box serial number. I also detected my battery was wear 3%. ON 05/07/2015, I re-tested battery wear level, it is 5%.
    What happen with my laptop, I don't know the reason why my battery was wear and bios serial number was difference with box serial number.

    Did you contact your local seller or any MSI-authorized service providers?
    You can take some pictures of the problem first and send those to them.
    There seems only one service point in your country.
    http://www.msi.com/page/service-location
    Vietnam
    DIGIWORLD CORPORATION
    Address:105 Thai Ha Str, Dong Da Dist
    TEL: 0903 963 373

  • Internal order created with incorrect auc number

    Hi, An internal order was created but the asset number entered was incorrect. The internal order has now been settled but i need to change the asset number. Any help on how to do this and if i can what will happen to the settled amounts. Thanks

    hi
    reverse the settlement and assign the right asset number and again run the settlement.

  • I have an array in which I want to check and see if it falls within a certain range with about 7 different ranges. I have tried the range and coerce function but something is going wrong.

    Also, I have a timer that lets me know how long the trigger has been active. I want to know if it is possible if that time would be reset everytime the trigger goes off.
    Attachments:
    Code.vi ‏113 KB

    1. Do not run using the Continuous Run button! This is intended only for certain types of trouble shooting and not for normal operation.
    2. Put a while loop around your entire program.  Add a stop button wired to the stop terminal of the loop.
    3. Then you can replace all the feedback nodes with one shift register with the input expanded to five elements. Sum the three bottom ones for your averaging.
    4. Nothing is wrong with the In Range and Coerce.  You should only check it when you have data.  That is what the Data Available output from Trigger and Gate is for.
    5. I am not sure what you want to reset for your timer or exactly when, but it should be possible.
    6. I did not try to figure it all out but you may not need the timer while loop once you wrap the loop suggested in 2 around the rest of the code.  You may be able to move the shift registers to the outer loop. 
    Lynn

  • MOVED: Bios serial number difference with box serial number

    This topic has been moved to GAMING Notebooks.
    https://forum-en.msi.com/index.php?topic=253827.0

    Did you contact your local seller or any MSI-authorized service providers?
    You can take some pictures of the problem first and send those to them.
    There seems only one service point in your country.
    http://www.msi.com/page/service-location
    Vietnam
    DIGIWORLD CORPORATION
    Address:105 Thai Ha Str, Dong Da Dist
    TEL: 0903 963 373

  • How to change internal number range into external number range

    Hi All,
    There is a number range in the system which was assigned internally by mistake earlier. Now, I want to change the internally assigned number range to external number range.
    Can anyone please let me know, the procedure to change used number range from internal number range to external number range and from external number range to internal number range.
    Quick reply will be appreciated & points will be assigned.
    Thanks & Regards,

    hi Mehak,
    you can try to simply change the range from ext to int (and vica versa). If that does not wrok, than you can delete the range and recreate it with proper settings. But you have to take into account that if you have a range as external from 1 to 10 and for example numbers 2 and 5 are taken already than you recreate the range 1..10 as internal, than you could have some problems. Probably best is in this case to recreate with other interval.
    hope this helps
    ec

  • External number Range with leading zeros for Handling Units

    Hi Experts
        My requirement is to use the External number for the Handling Units provided by vendor.That number starts with 2digits"00"+18  for Example:00123456789123456789
      I am Using HU_VEKP Object for no range and maintaining
    External No Range From 00000000000900000000 to 00000000000999999999.
    But When i am giving Number 00000000000900000001 its only taking
    900000001.
    Kindly suggest me the right way to take leading zeros.
    Rewards for answer sure if it works.
    rajesh

    Hi Laksmipathi
                          I am maintaining the number range for External number range coz its vendor supplied HU.
               But the prefix zeros has meaning for identifying the Handling unit Functionality.In realtime IF prefix contains Say "0000" it refers to carton
    If prefix contains say "0010" it refers to pallet.
               So i need to satisfy there requirement.For example If it is for material number we can maintain In OMSL by check box of leading zeros.
                But i am not able to find any setting for this Handling units.U can check this object HU_VEKP in SNRO tcode where i am maintaining Number range.
    Thanks give suggestion
    RajeshS

  • Depreciation external  number range

    Hi,
    I am having one doubt:
    the depreciation posting always happens with external document number range If the external no range tick is not clicked then the system should take the internal number range.
    But if the check is not ticked then the system is not taking internal number range although it is asking for the number range to be external.
    I just want to ask is there any other setting which defines that depreciation should be posted with external number range.
    Regards,
    Meenakshi

    In earlier version i.e prior to ecc 6.0 the asset depreciation document type number range was external. There is no special settings required , since it is standard procedure.
    However from ECC 6.00 you need not define the document type to be external.

  • External Number Range setting for Equipment Not working

    As per the Requirement I have assigned A00000000000 - ZZZZZZZZZZZZ to an equipment category through OIEN.
    but I am getting the error message in the IE01 screen whenever I try to create an equiment with some external number for this category.
    Equipment category does not allow alphanumeric equipment number
    Can some one help whether anyother settings are needed.
    (It is to be noted that system gives correct error message if I try to create equipment without giving external number - No internal number range defined for equipment category)
    Regards
    Jogeswara Rao

    Hi Jogeswara Rao,
    Check you other post for reply
    Plant Maintenance & Customer Service->Master Data in Plant Maintenance and Customer Service->Technical Objects->Equipment->Equipment Categories >>>> Maintain Equiment Category >>>> select your category and check whether you have ticked "No Alphanumeric Equipment Numbers" or not.

  • Exit for assigning external number range to sales document

    hello friends,
    can anyone help with this issue.in tcode 'vn01' we are assiging internal number range but we dont want that number range that is external number range rather than using internal number for sales document.i.e the number range should start with 'ufc'followed by some number range.
    plz reply as soon as possible .
    thanks and regards,
    siri

    Hi Sirisha,
    I believe you can assign external number range manually by using transaction SNRO and then assign the number range before entering into the main screen of  VA01 or saving the document.
    The number range is linked to the order type (VBAK-AUART), this is done in customizing.
    For different sales area it need to have different number ranges for the same order type.
    Please see that the same sales doument number should not be linked to several sales orders which are to be created,if I am not wrong
    Regards,
    Naresh
    ****Please do reward points if found useful

  • Different Production order number ranges with same order type

    Dear Friends,
    I am working on live project implementation.I am having four manufacturing plants.I am having one order type say PPLE, I am having two different versions say CM and CN.Now my requirement is can I maintain  two different number ranges for same order types within single plant .
    number ranges should be like,
    Plant          Version     Number ranges
    1210            CM           CM121008...
    1210            CN            CN121008
    1220            CM           CM121008
    1220             CN           CN121008
    and so on.here first two digit should be version,then plant and year followed by order number .
    Regards,
    Manoj Jadhav

    Hi manoj,
    You cant have two different number ranges for an order type in internal number range, but in external number range you can have two diffrent number ranges
    for example for one order you can start with CM1210080001 and other starting from CN1210080001.
    Just convince the client to have external number range
    Regards,
    Srini

  • How to replace TLB order in APO (/sapapo/snptlb) with external number

    Hi All,
    I am trying to replace TLB order (ex. APO-0001) created in transaction /sapapo/snptlb with an external number generated by me
    (ex. test-123). Can anyone suggest an FM or anymethod or process for the same.
    Win full points by answering this simple question !!
    Thanks - Chandan

    Dear Chandan
    You can make the settings in SPRO->APO->SNP->Basic setting-> Maintain Number Ranges for orders . Maintain the number ranage and Tick it as External.
    When you Run TLB, You can provide the external number.

Maybe you are looking for