TOC problem - one item, two TOC entries

My document is set up with two columns per page. With that, some of the headers are too long to fit on one line so I have put in a hard break so they will break at a logical point. With that though, those headers are now showing up in the TOC as two separate entries. Is there a way I can control the line break on my headers without the header showing up as two entries in the TOC.

Balance ragged lines is great, I do it quite a lot, but only when I have a narrow measure. It looks so out of place if you have a wide measure, and your heading only spans half the page. I find it more natural in a wide measure for the text to flow across the page, even if you only have two words on the next line. That's why in a wide measure for headings I insert a non-breaking space between the last two words so that they are never pushed onto a line by themselves.

Similar Messages

TOC - removing one dot after an entry (before the dot leader)

Can anyone help me with an issues I'm having with the TOC in InDesign? I'm working in CS5, but I've had the same issue in CC.
Here's what's happening:
I have a TOC for figures that show up in a document. Each figure has a caption (for example: Figure 1 Triangle.)
Those captions have a paragraph styles assigned to them, and that paragraph style links to the TOC for the figure list.
Do you see the "." at the end of the caption? That dot goes into the TOC entry as well. This looks bad because there is a space between that "." and the dot leader that comes after the entry. I am at wit's end to figure out how to get rid of that space, or get rid of the dot, or something. The client is very adamant about there being a "." at the end of the caption, and there NOT being a dot at the end of the entry in the TOC.
Please help. What should I do??

I knew you would have an idea. That's why I ask you
Here's a screenshot of the TOC as I want it to look:
sorry that it's not in English, but you get the point, right? The first work on the left is "Figure."
I added a forced line break in Figure 3 to make it go onto the next line. That wasn't a good thing to do though, because the break gets overridden when I update the TOC. If I add the line break in the actual Figure 3 caption on page 6, the TOC picks that up. The problem is that I don't want a line break in the actual caption on page 6.
Here's the TOC as it updates:
The figure 3 line takes up too much space and there is no space for the tab leader. And I don't really want to change the tracking in that caption, though I could do that if theres no other way.
Please help

Pricing problem : one product two treatment,one single customer

dear all,
i am facing a strange problem
i m having some material which is under one division one distribution channel and one sale organization,and also the customer is same,but the customer some times taking the product for internal use of their company so they order it as general product and charging 4% tax on it
and some times they are asking product as spare and the spare is rate is hihg ,the tax is 12.5%then additional cess and exice duty is there
so the treat ment is totally different
can any body help me to solve this
shoud i make another division
should i make another distribution channel shoud i use another pricing procedure
should i use another order type to raise the order
please please solve the problem
regards
subrat
[email protected]

Hi Subrat,
Pls split the problem as follows.
In the system perspective, what will differentiate the internal sales from general sales or spare parts sale. To my understanding, if soemthing is sold for internal sales, it is sold in a particular way(Distribution channel) which is different from the way it is sold as a spare part. So extend this material to two D.C., one for internal sales and another for sparepart sales.
Also find out who will be the partners in both the cases. Are there any dedicated partners for one process who cant be a partner for other process. For example a payer for internal sales cant be a payer for spare part sales.
Like this try to find out the unique organisational entities for both the processes.
Then create your condition tables based on these entities so that you can maintain different values for the same condition type based on different values of the organisational entities (Distribution channel, payer, sold to party etc)
Please assign reward point if this approach helps you to solve the problem.

Problem: One library two locations?

Hi all,
I have a 2010 Mac Pro and have always had my itunes library on a separate internal drive. Recently I noticed my boot drive had been filling up and discovered that mobile apps have started to be stored in the Mobile Applications folder in an identical itunes library folder on the boot drive.
I'm assuming at some point I did an itunes update and it switched over to the default file location, "Music" on the boot drive.
In the itunes preferences my itunes media folder location is still listed as the separate internal drive, not the boot drive. Newly imported music is still going to the designated location.
Please see the attached image. The top panel is from my boot drive, the second is the separate internal hard drive. There's some minor differences in the way the two are organized. For example, in the boot drive "Automatically Add to iTunes" is under "itunes Music", but in the selected location-- the separate internal drive-- "Automatically Add to itunes" is directly under "iTunes".(just an example of one of the small differences in the way the folders are organized)
Again, the bottom panel is my selected itunes folder location from the itunes preferences and where I've always stored my music. The top panel is from the "Music" folder on my boot drive— an iTunes folder that I don't remember creating and where my mobile apps are now going.
Any way to get this smoothed out?
Thanks very much in advance for any help anyone may have

If you set both accounts to store files in the same place this can work. Each user will still have separate playlists, playcounts, etc.
http://docs.info.apple.com/article.html?artnum=300432
Files added by one user will be available to the other user but must be added to library using add folder or add file option. It is not automatic, there is no iTunes option for it to be made automatic.

Items in the Itunes library were not copied because of one or two errors occurred. How to fix this problem?

Items in the Itunes library were not copied because of one or two errors occurred. How to fix this problem?

Hello mobyash,
Have you tried converting each of these 8 tracks to a different file format and seeing if they will then sync to your iPod. See this Apple support document for information and instructions on how to convert a song to a different format.
iTunes: How to convert a song to a different file format
B-rock

I got problem on installing iTunes. When I clicked iTunes out, two windows popped out. One said the procedure entry point CFAttributed String Create Mutable could not be located in the dynamic link library Core Foundation.dll.

I got problem on installing iTunes. When I clicked iTunes out, two windows popped out. One said the procedure entry point CFAttributed String Create Mutable could not be located in the dynamic link library Core Foundation.dll. and one just said *Itunes was not installed correctly. Please re install I Tunes Error 7 (windows error 127) . I've tried uninstalling and reinstalling it. But either way cant work. I really need some of your help! PLS HELP ME!

For general advice see Troubleshooting issues with iTunes for Windows updates.
The error shares a similar pattern to that in the third box, so a similar approach should work. Look for CoreFoundation.dll in C:\Program Files (x86)\Common Files\Apple\Apple Application Support, delete it, then repair Apple Application Support.
The steps in the second box are a guide to removing everything related to iTunes and then rebuilding it which is often a good starting point unless the symptoms indicate a more specific approach. Review the other boxes and the list of support documents further down page in case one of them applies.
Your library should be unaffected by these steps but there is backup and recovery advice elsewhere in the user tip.
tt2

Table of Contents Issue - TOC Styles Set Correctly, but TOC Shows Two Fonts on One TOC Line

I created a template and set up all of the styles correctly, as with every other template I've ever made. However, I have never run into this problem before.
I created the template to match a client's style/look. They use a font called "Gill Sans MT." My Normal style is set to this, and my TOC styles (TOC 1, TOC 2, TOC 3, etc.) are based off of the Normal style. My Heading styles are
also based off the Normal style and use the same font.
For some reason, the TOC in the document is populating with two different styles. The actual Heading text is showing up as Arial font, but the tab leader and the page number are showing up in the Gill Sans MT font (see below).
Any idea what's going on here? I have tried modifying the TOC styles, inserting a new TOC, basing the TOC styles off of "(no style)," changing the Heading styles, clearing the formatting on the Heading styles, etc. I can't get anything
to work.

All I can suggest is to try your steps again. You mention everything that I would try.
I assume that the template is a .dotx or .dotm file, and so, does not have an "attached template."
When you tried basing your TOC styles off "no style" I assume you set the font to Gill Sans MT. I would definitely have the heading and TOC styles set to cascade.
How styles in Microsoft Word cascade by Shauna Kelly
Charles Kenyon Madison, WI

Multiple TOCs for One Project

Is it possible to split the topics in one help project into
two toc (hhc) files? I have a master project that merges about 53
chm files. Some of the slave projects are rather large and over the
years have had several types of information added to them. The
information in the projects are related to each other, but they
need to be organized separately in the master TOC. Splitting the
projects themselves is not a good solution. I would like to have
multiple hhc files for the projects so that the topics can easily
be inserted in their logical place in the master TOC.

Hi,
I am TW working jointly with another TW on a huge multifirm
project for a same client. He is well versed in RH, while I am a
beginner (with using RH) not with TW. He and I each produce large
parts of what will be merged into a single huge context sensitive
.chm file. Having experimented a bit with possibilities such as the
ones you are exploring, I thought we could use it for our project.
But the other TW felt we would have problems down the road.
Just to confirm what John says. But then, I also am not
adding anything positive by way of solution. Hope somebody else
reacts to these two successive negative answers, and comes up with
help for you.
Daniel Garneau, CTM, CL
Technical Writer, Canada

Webhelp parent TOC problem

In Robohelp 10.
When I have more than 25 child TOCs published into my Parent projects TOC:
When I display the parent TOC all looks ok till I select a child TOC. At this point the child project is then displayed in a separate IE session.
If I amend the parent to have say only 20 child TOC entries, on then displaying the parent TOC in IE, the child TOCs then open correctly within the same IE session.
Any thoughs on the cause of this problem?
Best Regards,
Paul Ashton.

Thanks very much for your help with this one.
I've isolated a child project that was causing the problem and I now get all of the child contents appearing correctly within the parent TOC. I've managed to get 54 child projects (originating in Robohelp 8) upgraded to R10 and attached.

TOC problems after RH5 - RH7 upgrade

Hello,
I use RoboHTML to create help projects.
After upgrading one with several subprojects from RH5 to RH7
the following problem occurs:
the TOC of the subproject is not incorporated in the main
TOC, instead the name of the subproject is shown. when clicking
this, the subproject is opened in a new tab (tested on Firefix3 and
Opera9.5), virtualy as a separate project.
The same project was previously published with RH5, with the
subprojects correctly linked.
Also, I reveive the attached java error (again not existing
with RH5) when opening the start page. if I substitute the newly
generated WebHelp.jar with the old one (generated by RH5) the error
ceases but the TOC problem persists.
Any ideas?
Thanks a lot,
Norbert

I recently tested the 9.0.1 upgrade and the hotfix for 9.0.1, but the problem still exists. However, "ColdFusion Jedi" Raymond Camden came up with a workaround. You can read about it here:
http://www.coldfusionjedi.com/index.cfm/2010/9/16/Followup-to-CFGRID-MultiRow-Post
The problem occurred when the Adobe team that released the 9.0.1 upgrade added "multi-row select" functionality to the HTML/AJAX version of CFGRID, but they failed to include the same ID-passing functionality of the previous "single-row select" implementation.
I created a more generic version of Raymond's javascript function which finds the selected row(s). This javascript must reside on every page which contains an HTML cfgrid:
<script type="text/javascript">
function getSelected(gridName,idName) {
    obj = ColdFusion.Grid.getSelectedRows(gridName);
    var selected = "";
    for(var i=0; i<obj.length; i++) {
      if(selected == "") selected = obj[i][idName];
      else selected += "," + obj[i][idName];
    document.getElementById('selectedRowIDs').value = selected;
    return true;
</script>
To force the selected row's ID (or other) field to be passed to to the subsequent page, you must include the following in your CFFORM tag (the field name MUST BE in ALL CAPS):
     onSubmit="return getSelected('gridName','FIELDNAME')"
Example: <cfform name="itemGridForm" action="editItems.cfm" method="post" onSubmit="return getSelected('itemGrid','ITEMID')"...>
You must also include the following hidden field in your cfform which contains the cfgrid:
    
     <cfinput type="hidden" name="selectedRowIDs" id="selectedRowIDs">
On the called page, FORM.selectedRowIDs will contain a list of the selected rows' ID fields (or whichever field you choose when calling the Javascript function).
Message was edited by: el-cott

TOC Problems related to margins - any ideas?

I had problems with inserting a TOC in a document all day today. For the thesis I need 1.5 in. margin on the left and 1 inch top, bottom and right. TOC function only seems to work properly with all margins being 1 inch or less. What can I do?
Thank you, Gary

Hello,
klick into your table of contents (the entries should now be marked with the blue color) and then open the "Inspector". Go to "Text" and press the "Tabs" button. Change the "Tab Stops" entry (doubleclick on it) to a smaller value.

Two types of taxs of one item

Hi Experts:
   I face one problem of posting tax.
   In some cases of our business,there r two types of taxes in one item. First one is paid by customer and another is paid by our company.
   We want to generate the accounting document like that:
   DR: customer AR
   CR: SALES REVENUE
       OUT PUT TAX PAID BY CUSTOMER
   DR: EXPENSE Account
   CR: Tax paid by us
   Can I do it like this? If possible, how can I configure it?
Thanks and Best Regards
David Wang

Hello,
Discuss with your finance team
Thanks
RK

Partial payment tab problem when clearing two open items in vendor account

Dear All,
I have the problem with partial payment procedure.
As SAP is presenting the process, partial payment should work as follows (i.e. with vendor):
1. Incoming invoice is posted -> Credit -100
2. Credit note is posted -> Debit +20
3. Payment (without clearing) is posted to vendor account -> Debit +50
I'll run transaction F-44 and go to tab "Partial payment".
I see 3 items (as above).
I mark Item -100 and +20
I double click in filed next to -100 and it changes to -20
An now it should make no posting but only assignemet of one item to another.
But in my case, if I click "save" icon, it makes postings Debit 20 and Credit -20 on vendor account.
Is there any possibility that such clearing will not generate any posting but just make assignement of one item to another. Or maybe there is something wrongly configured in the system. At the moment the partial payment makes some kind of residual items.
Thanks in advance for replay.
Best regards
Greg

Hello,
Yes, it's right, whenever we clear vendor or custmoer account, the system creates document, but as I remeber from other instalations, the document had header but there was no postings.
It case described, the system creates posting:
40 Vendor 20 EUR
50 Vendor 20 EUR
This is strange for me. As ther should be clearing document but with no postings.
Have you got any idea how to configure the system, so partial payment tab in clearing transactions creates clearing document but with no phisical postings.
Best regards
Greg

I am running Windows7 on my PVC. When I log in I'm getting two Apple error messages. One says, " The procedure entry point sqlite3_wal_checkpoint could not be located in the dynamic link library SQLite3.dll." The second says, "Apple Photostreams stop

I am running Windows7 on my PVC. When I log in I'm getting two Apple error messages. One says, " The procedure entry point sqlite3_wal_checkpoint could not be located in the dynamic link library SQLite3.dll." The second says, "Apple Photostreams Uploader has stopped working". Help!

Entry point errors can often be fixed by deleting the offending dll, then repairing the component it is part of. If that doesn't help read on...
For general advice see Troubleshooting issues with iTunes for Windows updates.
The steps in the second box are a guide to removing everything related to iTunes and then rebuilding it which is often a good starting point unless the symptoms indicate a more specific approach. Review the other boxes and the list of support documents further down the page in case one of them applies.
Your library should be unaffected by these steps but there is backup and recovery advice elsewhere in the user tip.
If the advice above doesn't resolve things you could try this alternate version:
iTunes 12.1.0.71 for Windows (64-bit - for older video cards) - itunes64setup.exe (2015-01-28)
which is a 64-bit installer for the 32-bit version of the core application, similar to previous 64-bit releases.
Or roll back to the previous build:
iTunes 12.0.1.26 for Windows (32-bit) - iTunesSetup.exe (2014-10-16)
iTunes 12.0.1.26 for Windows (64-bit) - iTunes64Setup.exe (2014-10-16)
tt2

Log Entries not sorted in Problem work items

We have noticed that the Log Entries in all Problem work items appear to be randomly sorted. You can manually sort them by clicking on the column headers.
Log entries for Service Request and Incident work items are sorted by Created date as default which I guess is how most people would want them. Has anyone else noticed this or can this be configured locally somehow?
Thanks

Hi,
I checked my lab, and saw that only incident's log entries is sorted by date:
Log entries for SR and Problem are not sorted:
And this is hard-coded, if you want to sort them by date, we should click Date Time.
Regards,
Yan Li
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact [email protected]

TOC problem - one item, two TOC entries

Similar Messages

Maybe you are looking for